Properties don't show up in the current viewbar filter

Hello,
When clicking the Entity dimension on the current view bar, then applying the filter, there is only one property option to select (The ID property). Even though there are about 15 properties defined. This dimension processes fine, but it is the largest dimension with around 35,000 lines. All other dimension properties appear under the filter. Is this a size issue? or is there another problem here?
Thanks!

Assuming the InApp selection is not causing your issue, I ran into a similar problem on a 5.1 SP3 environment. We had an application that was originally written in a 4.x environment. The dimension had > 100,000 members, and in 4.x the filters worked fine. However, in 5.1, the properties were not displayed in the filter dialog.
I opened a ticket with support, and after a few weeks, they confirmed that there is a bug when a dimension contains more than 26,000 or 27,000 members (I don't have the ticket handy, but I seem to remember that is the cutoff). Unfortunately, they told me that the fix would not be available until 7.0 was released.
Ray

Similar Messages

Cross Farm: User Profile Custom Properties do not show up in the consumer farm web applications

I have a two SharePoint 2010 farms, one is the publishing farm and user profile service is running on this farm. I have defined a couple of new custom properties, and after a while these custom properties do not show up at the consumer farm end.
So, on the publishing farm, I can udpate the user profiles with values in these custom properties. However, neither the custom properties nor the values got synchronized to the consumer farm. What puzzled me further is that some of the existing custom properties
exist on the consumer farm, but not the new custom properties I recently added.
1. I have made sure the application pool accounts on both the farms being added to the administrators with full control permission in UPS on the publishing farm.
2. The User Profile Service proxy (connected to the publishing farm UPS application) is associated with all the web applications on the consumer farm.
3. When values in the user profiles on the publishing farm changed, these changes do not get replicated to the consuming farm user profiles. This symptom occurs on both custom and OOB user profile properties.
However, I cannot find any other related information on the web, nor from the ULS logs.

Hi,
As I understand, it did not display the new custom properties you defined in the publishing farm at the consumer farm end.
1. Check if the topology Discovery Service Application runs well in consuming farm. In the Central Administration, it is the Application Discovery and load Balancer Service Application, check if it starts.
In the IIS, it is the topology, check if it starts.
2. Check the permissions have been established if you have established consumer farm permissions on Provider Farm before you publish the service application.
1. Go to Central Administration and going to “Manage Service Applications”.
2. Click on “Application Discovery and Load Balancer Service Application” and click “Permissions” from the ribbon.
Your farm GUID should be listed with full permissions.
The article is about Shared Service Architecture in a multi farm environment
http://blogs.msdn.com/b/russmax/archive/2010/05/06/sharepoint-2010-shared-service-architecture-part-2.aspx
Best regards
Sara Fan
TechNet Community Support

When copying songs to my itunes some of the songs don't show up in the library. I can see that they are being downloaded/copied to my itunes, but I cannot locate them in my library.

When copying songs to my itunes some of the songs don't show up in the library. I can see that they are being downloaded/copied to my itunes, but I cannot locate them in my library?

Do you have a Recently Added playlist? Can you see them there?

Most iPhoto '09 albums don't show up in the screen saver preferences

I just realised that most of my iPhoto '09 albums don't show up in the screen saver preferences... How can I make them visible again?

Bruce Etnyre has a more permanent fix over on the Using 10.5 forum:
You might try this. Go to the:
Macintosh HD/Users/yourusername/Library/Preferences/ByHost folder
(where “yourusername” is the short name of your computer, like baumgarten - the folder looks like a house/home)
and move these files to the Trash:
com.apple.screensaver.XXXXX.plist
com.apple.screensaver.slideshow.XXXXX.plist
and this one, if you have it:
com.apple.iphotomosaic.XXXXX.plist
The XXXXX before the .plist is a hexadecimal string.
Regards
TD

IPhoto '09 albums don't show up in the screen saver preferences

I just realised that most of my iPhoto '09 albums don't show up in the screen saver preferences... How can I make them visible again?

Bruce Etnyre has a more permanent fix over on the Using 10.5 forum:
You might try this. Go to the:
Macintosh HD/Users/yourusername/Library/Preferences/ByHost folder
(where “yourusername” is the short name of your computer, like baumgarten - the folder looks like a house/home)
and move these files to the Trash:
com.apple.screensaver.XXXXX.plist
com.apple.screensaver.slideshow.XXXXX.plist
and this one, if you have it:
com.apple.iphotomosaic.XXXXX.plist
The XXXXX before the .plist is a hexadecimal string.
Regards
TD

[kde] "Only show tasks from the current desktop" doesn't work for max

Hi,
I have two monitor setup (laptop + main monitor) and I would love to use "Only show tasks from the current desktop" option in KDE Task Manager but for some strange reason it doesn't work for me. Well, it works but only partially - for restored/unmaximized windows. When I maximize one it appears on the Taskbar on both screens. Is this normal? May it be due to the fact that I've placed Taskbar on top of the screens?

Did you miss this bit
"Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
And the final image clearly states the type of Graphics Card he has
Photoshop CS6 GPU FAQ
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)

Templates don't show up in the Assets Templates panel !?

I made some templates but a few don't show up in the Assets > Templates panel.
I opened all the .dwt files in Dreamweaver (within the Templates folder), then closed and restarted Dreamweaver. That should “force” Dreamweaver to recognize the templates so that they show up in the Assets panel, but DW didn't.
I also deleted the DW cache.
What could I do wrong ?

That won't work either !
I made a new page from that tmpl and saved it. Closed DW ... opened it ... but nothing.
Also deleted the cachefile while DW was closed.
Strange !?

Pictures don't show up in the movie

Hi
I'm doing my first project with iMovie. The pictures I added from iPhoto don't show up in the movie. Instead it says that the "original clip is missing".
I added them as it is explained in the guidelines...
Thank you!

Hi jazz44,
Welcome to the Support Communities!
Are you accessing the pictures from the Camera Roll in the Photos app?
The articles below may be able to help you with this issue.
Click on the links below to see more details and screenshots.
iMovie for iOS: Why do I receive a message indicating that iMovie can't access my videos and photos?
http://support.apple.com/kb/TS3391
Follow these steps to access your photos and videos:
Tap Settings on your iOS device.
Tap Location Services. (You may have to tap General and then tap Location Services, depending on your version of iOS).
Set the iMovie switch to On.
Also, check the Privacy settings for the iPad to make sure iMovie has been granted access to your Photos:
See page 119 of the iPad User Guide:
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
Go to Settings > Privacy. You can see which apps have requested and been granted access to the following information:
Contacts
Calendars
Reminders
Photos
Bluetooth Sharing
Twitter
Facebook
You can turn on or off each app’s access to each category of information.
For more information about iMovie for iOS, please refer to the online manual below:
iMovie Help: Get answers fast
http://help.apple.com/imovie/ipad/1.4/index.html
Enjoy!
- Judy

Why is it that some missed calls don't show up in the missed calls list?

Why is it that some missed calls don't show up in the Missed Calls list?

Missed calls can only appear in your missed call list if your phone knows about them. In other words, if the phone rang, but you did not answer.
If a call was missed because your phone was turned off or not in a strong enough service area to receive the call, then it will not show up on your phone.

To connect the Current User Filter with the Excel Web Access

Hello,
I have uploaded an excel sheet which has data in Pivot table format into SharePoint site and then by using the current user filter I am trying to connect the filter (sharepoint profile user property) to a parameter in the excel sheet. I have defined one
of the pivot filter as the parameter. But all this, raises an error as below
"Unable to set one or more parameters. An error occurred while attempting to set one or more parameters in this workbook. As a result, none of the parameters has been set. Click OK to return to the workbook."
please assist.
Thanks & Regards
Thank You

I had referred this link but the example provided is related linking dashboard filters with the pivot table filter and i require to connect a current user filter.
The current user filter does not have any properties similar to what the dashboard filter have and we are not looking at using dashboard for our requirement.
Thank You
Thank You

Why do my App Reviews and Ratings don't show up in the App Store?

Hey everyone..
    I've been having trouble for at least a year now where whatever Review I write does not show up anywhere. I have done a lot of research on this subject prior to opening this Thread here, and have obvioudly not found anything on the subject.
I am aware as I read somewhere that for a review to display, the app needs to have at least 5 reviews, (which I also find obscure). We are talking about apps that have loads of reviews already posted.
It's needless to say HOW annoying it is to spare PRECIOUS time to review an app, (whether for positive, negative, neutral), and find out that it just went to waste. I never had this problem till about 1 year ago, where I noticed that no matter where I wrote a review, (from my macbook, within the store, from my iPad mini, from my ipod touch), it just NEVER showed up even after days or even weeks when I checked back.
Before I start wrting the review it asks for my Apple store password, (so far so good), after I'm done with the rating and Review, I press submit and .....nada....I don't get a confirmation or something that will say it's under Review from the App store. When I try to repeat the process, get out of the app I'm trying to review, and go back to write my Review, what I wrote is just simply sitting there, together with my Rating as if nothing happened.
I am aware that others have written before about this issue to no avail, now can SOMEONE please put an end to this MADNESS and answer one and for ALL the very, lately, disappointed, Apple fans that keep accumulating....? Can Apple give us an OFFICIAL explanation/solution to this very annoying issue? Or does it prefer to conveniently leave it as is for some "obscure" reason...?
Any replies will be more than appreciated...
Cheers

Ok everyone...
So, after going through a hundred steps to manage and contact Apple Support via e mail, I sent them an e mail and got a reply saying that they will get in touch with me within 48hrs. Today, (24hrs), I received a reply telling me that they understand my frustration and has been an "on going issue". He wanted alse to verify what my nickname was for my the Reviews I had given.
   After revisiting for the millionth time my iTunes store Account, to go to settings, and manage Reviews, (which is what I always did to check and see if they show up), to find out if my nickname had changed for some reason, I pressed on some older reviews, (like from 2010, which I remember had shown up), to check out my nickname.
I verified my nickname being the same as I remember. The 2nd app I checked which I knew I had reviewed, but from last year, was not showing. So, it dawned on me to press the “All Versions” options on the reviewing section of the app…and…voila….there it was. So, I took it further and looked at other even more recent reviews I had written and I also found out that they showed under the “All Versions” option.
   Then I checked my last 3-4 that I did within the last few months that I knew did not show up and the apps also had no Upgrades that I knew of. Then, I discovered the sorting options , (on the right side), for showing Reviews. It seems like that it automatically sorts them out by “Most Helpful”, (which is odd), so I chose “Most Recent”…and….voila again, my review was beautifully sitting there with my nickname and everything…I couldn’t believe it.
Now I’m going to try and find if there is a way to have the “Most Recent” always as default…is there…? But it makes me wonder if all of you guys have the same problem and if the solution is indeed the same, (sorting out by most Recent or whatever other option will make your review show up). Give it a try and see how it works out for you. Please take the time to post your findings here. It would be helpful for everyone else as well. I wonder why Apple has not picked up on this?
I have to give it to them for the quick reply though..(mind you my e mail was quite.."angry"..).
Thanks again for reading..

When people activate connection keys, they don't show up in the Admin users list. Why?

I send people their key by e-mail. In most cases, when they click on it and it loads Contribute and they plug in the password, it will show up in the Admin listing of users. Other times, the same process is followed but they don't show up on any user list. What can I do to get them listed?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

The preview and cover flow don't show thumbnails of the quicktime videos. How to fix?, The preview and cover flow don't show thumbnails of the quicktime videos. How to fix?

When I upgraded to Mavericks the cover flow or the preview pane in finder don't show a thumbnail of an uncompressed quicktime movie. I use this to search for the correct clip so it was very useful in prior versions of OS X but appears to be left off in Mavericks. If anyone knows a work around I would appreciate it since I work with thousands of video clips. To click each one seems very tedious.
Also, when I click on an uncompressed video, quicktime "converts" the video to some different format. Why doesn't it just play the video instead of converting? Is there a way to stop this? I hate have to say - no I don't want to save this file.
Arrgh!

Does anyone in the community have insite into this issue (same with animation compressed QT's). Is this just the way it is moving forward (a terrible thing) or is it a bug that will be fixed in the near future. Apples silince on if this is a "feature" or a "bug" is frustrating.
Thanks.
Lawrence

Contacts don't show up in the Cloud

I can't save my contacts in the cloud, i have the cloud turned on and when i set up a reminder on my iphone 5 it shows up in the cloud but contacts do not. They only show up if i manually add new ones to the phone. I had a blackberry prior to the iphone, i saved the contacts to my computer as a "windows contact" i don't use outlook or anything else. I then added them to iphone. I wanted to update, edit and delete certain contacts and it would be easier do it from a computer. Oddly enough the contacts I saved on my computer as indivual files are being updated as i change them on the phone fyi.
I'm getting increasing annoyed by not having them in the cloud so I could really use some direction here please.

i believe so
[IMG]http://i113.photobucket.com/albums/n238/mickey01023/photo.png[/IMG]

Refining a query to only show entries for the current week

Hello.
Does anyone know how to modify a query to only show records that have dates in the current week? Records have a start date and a finish date so the query should recognise that an entry may be valid for more than one week?
Kind Regards,
swelch

Assuming week ends on a saturday and dates aren't NULL - change as appropriate - this is one way
All rows....
SELECT TO_CHAR (begin_date, 'DD-Mon-YYYY HH24:MI:SS') AS begin_date
, TO_CHAR (end_date, 'DD-Mon-YYYY HH24:MI:SS') AS end_date
FROM mydates
ORDER BY begin_date;
BEGIN_DATE,END_DATE
05-Jul-2011 06:49:25,15-Jul-2011 06:49:25
05-Jun-2011 06:48:57,15-Jun-2011 06:48:57
15-Jun-2011 06:48:29,25-Jun-2011 06:48:29
25-Jun-2011 06:47:57,05-Jul-2011 06:47:57
Current week rows....
SELECT TO_CHAR (begin_date, 'DD-Mon-YYYY HH24:MI:SS') AS begin_date,
TO_CHAR (end_date, 'DD-Mon-YYYY HH24:MI:SS') AS end_date
FROM mydates
WHERE TRUNC (begin_date) < NEXT_DAY (TRUNC (SYSDATE) - 1, 'Sat') + 1
AND TRUNC (end_date) > NEXT_DAY (TRUNC (SYSDATE) - 1, 'Sat') - 7
ORDER BY begin_date
BEGIN_DATE,END_DATE
15-Jun-2011 06:48:29,25-Jun-2011 06:48:29
25-Jun-2011 06:47:57,05-Jul-2011 06:47:57
Edited by: Robert Chalton on 25-Jun-2011 07:01

Properties don't show up in the current viewbar filter

Similar Messages

Maybe you are looking for