Property not found in object??

My Document Class is an object called Allegheny, which extends MovieClip.
Within Allegheny, I set values for static string variables _d and _g.
From Allegheny, I call multiple times another object called MuniAllegheny.
In MuniAllegheny, I need to call to use the value for _d and the value for _g.
I can do this if I write:
muniallegheny_g = Allegheny._g;
But if I pass Allegheny as a parameter to MuniAllegheny, and I try writing:
muniallegheny_g = thisMuni._g;

You made them static... so you need to access them through the class itself, not an instance of it. Either don't make them static, or access them through Allegheny.

Similar Messages

Error in allocating Despatch number Interval not found Number object J_1IIN

Dear All,
I am facing a problem while doing an excise invoice. System is throwing an error saying that " Error in allocating Despatch number Interval not found Number object J_1IINTPR2.
Can somebody help me with a solution ?
Rgds,
Indrajit Dey

Dear Indrajit
Go to SNUM, input object J_1IINTPR2 and click on Number Ranges. Enter [Excise Group] and click on Intervals (with pencil icon). Maintain the number range and save. Now try the process once again.
thanks
G. Lakshmipathi

Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
Shankar

HI,
whats the message class, message number?
BR Christian

Error in allocating Excise inv no Interval not found No object J_1IEXCLOC

Hi, When I try to execute J1IV, I am getting the below error:
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
All number ranges are maintained for the above object. Please let me know, whether anyone encountered the same situation and how to resolve the same.
Regards
Suresh

Hi,
Please check in SNRO as you allocated no range for J_1IEXCLOC object for your series group & check for J_1IARE3 object also for same series group.
regards

Error in allocating Despatch serial number Interval not found Number object

Hi All,
While saving the Excise Invoice(created w.r.to Invoice) in J1IIN system is throwing the error:
"Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
Message no. 8I336"
The Excise Group(say 99) was created.
But the same is not reflecting in the drop down list of SNUM for maintaining the No.Range in the Object J_1IINTPR2.
Do the needful to resolve this issue.
Needless to say helpful answers will be rewarded.
Regards,
Raj Kumar Reddy.

Dear Raj,
Go to Excise group details here you check these settings
IMG>Logistics general>Tax on Goods movements>India>Basic settings-->Maintain Excise groups
Have you check all these check boxes
1.Excise Inv during billing
2.Create and Post Invsingle step
3,Depot Excise invoice
4.EI capture
5.Diuty Different at GR
6.EI create/RG23D selection
7.Update RG1 at MIGO
I hope this will help you,
Regards,
Murali.

Error in allocating RG23D document number Interval not found Number object

Dear
Expert
Error in allocating RG23D document number Interval not found Number object J_1IRG23D
I tried the solution given in the forum but its not working,
Pls help me out.
Thanks and Regards
Deepankar

Hi,
As a know that this is a problem of number range and I mentioned the same(SNUM> given the object and maintain the number range of this fiscal year but it didnt work also searched in the forum but didnt got any other solution so posted the issue.
hope now its clear.
Thanks and regards
Deepankar

Field Text Property Not Found

I have a Director MX 2004 based training course that is
periodically getting the following error:
property not found: #text
This training program was developed in Director 6.5 and
updated last year to MX 2004. The training program had been running
without error for six years prior to the update. I didn't update
the script that is causing the error until after receiving the
error reports.
After getting the error report I was able to reproduce the
error while running in MX 2004 and the error said:
Script error: Property not found
set the text of member "IN" = tempIN & sp &
pretempIN
#text
I checked the debugger and the local variables were all valid
and nothing seem out of place. The field cast member "IN" exists
and the member's sprite is static in the score (i.e., it's not
being dynamically created).
Since I couldn't figure out what the problem was I updated
the field update scripts to the new syntax:
member("INText", "Internal").text = tempIN & sp &
pretempIN
I also changed the name of the cast member thinking that the
name "IN" may be causing the problem. There are no other cast
members of the same name. Unfortunately, I'm still getting the same
error. There are other field member sprites that are getting
updated successfully before this line of code but for some reason
this particular field member sprite is causing the error, even
after changing the name of the member. I've since moved my text
formatting script to the frame script in the score where the field
members are located and tried preloading the member but neither of
those changes helped.
This error is very sporadic and I've only been able to
reproduce it few times on my local machine, and not since I updated
the script syntax and the field name, but my client is still
encountering the error. I checked that my client's program file
installation is up-to-date and they're running the newest
executable.
Any ideas of what might be causing the problem? I'm
stumped...
Mark

quote:
You seem to be using #field member and #text member
interchangably. They're
not the same type of member and they have different
properties.
Actually, I'm not. It's a field member. The member's name
"INText" probably led you to believe it's a text member. I changed
the member's name from "IN" to "INText" as I thought perhaps the
"IN" may be causing the problem. The member has always been a field
member. I'm not formatting the field or anything like that, I'm
only replacing the field contents. I don't use Director much
anymore, other than this project, but having used both 7.5 and MX,
I assumed that I could access the text property of a field using
the member("myField", "castName").text syntax as per the docs.
As for the concatenation, the variables are all strings so it
shouldn't really matter. The real problem is that the field
member's text property can't be found, not what I'm putting into
it. And the fact that it only happens occasionally is what I can't
figure out. Since I encountered the error myself inside of Director
and was able to run the debugger I was able to see all of the
variables in the debugger and check for the field member and its
properties in the Message window and everything looked okay.
quote:
To double check the member coflickt issue (director always
operates on the first occurance of a member name
It's definitely the only member using the name "INText",
plus, I checked all cast libs and it's a unique name.
When I originally converted the movie I do recall that I had
another cast member named "IN", the original name of the field
member, when I converted the movie. I can't remember the type of
member it was but I'm pretty sure it wasn't a field. Perhaps the
movie still has some kind of reference to that not field member and
may point to it occasionally, even though I've since renamed the
original field cast member to "INText".
Mark

[User home directory property not found.]

Our Roaming Profile policy does not work but exits with the following error message in the log file:
RoamingProfile Policy] "...[POLICYHANDLERS.RoamingProfile.ErrorInEnforcement] .... [User home directory property not found.] ...."
We are running ZCM 10.3.1
We have the exact same environment at another customer where everything is just working fine. We compared the user properties and could not find any differences. eDirectory is fine, too
Does anybody have the same problems or a solution to it?
Thanks,
Sebastian

Yes, home directory is defined in eDir.
In Novell Client for Windows XP there is no "Allow Roaming User Profile Paths to non-Windows servers" attribute, it is in Client for Win 7 only.
In roaming policy, if I type the path to home directory manualy, it works fine.
In our original environment I have ZfD 4 on Netware, roaming profiles save to home directories normally, without errors.

ADF Customization (Fusion Apps) - Property not found exception

All
Trying to customize a Fusion Apps application(essentially ADF) where in a popup has to be inserted into an existing page and displayed on UI on a Submit button click.
I have bound the popup to a backing bean property 'Sp1' so that the popup can be invoked programmatically from an action listener method. Note: Show popup behavior is not an option due to some of the business requirements.
When the page renders, it throws the exception 'Sp1' property not found in the backing bean class. Although the Submit button is able invoke the action listener method without an issue.
Not sure why the property is not found to the page when it is able to invoke other methods in the class. Any pointers?
Here are the steps followed:
1. Opened JDev in Fusion Apps Dev role > Created a ViewController project > Created a java bean A, manually added a RichPopup property Sp1, added an action listener method 'submitForApproval'
2. Created an Adf jar and deployed > Placed the jar under WEB-INF/lib directory under the EAR/WAR on the server and redeployed so that the jar becomes available to the Fusion App
3. Created another app which is a FA Customization App and a project under it
4. Now re-opened JDev in Fusion Apps Customization role > and opened up the FA Customization App
5. Customized the Fusion Apps page to associate the 'submitForApproval' bean action listener method to the existing Submit button on the page
6. Customized the page to insert a popup with Id='Sp1', marked the property contentDelivery=lazyUncached
7. Customized the corresponding taskflow to add the managed bean entry for the new bean
When I apply the customization MAR on the APP and run the page on the server, I see 'property Sp1 not found in the bean class' exception on the page.
However, when I click on Submit button anyway I see that the contents of the method are executed. So, I believe the page is definitely finding the class but not this property.
Verified that Sp1 property is of type RichPopup and has accessors in the bean.
Any pointers would be much useful.
Thanks
Niranjan

Since we donot use FusionApps , it will be hard to comment on this . Please post this on the internal ADF Frontend Forum @ myforums.oracle.com

Director Player Error : Handler not found in object

Hi,
I have made an exe to run a video in Director. This was done using old version of director, 8.5 supposedly.
When i try to run video through this exe, the video plays in background but i get the following error(snapshot attached):
"Handler not found in object
# openport
Script Error. Continue?"
I have installed shockwave player 8.5 and also put all the files from xtra folder to the folder where exe in lying but still i am getting the same error.
Any help will be greatly appreciated.

Looks like something in one of the scripts in your project that is being called but is not working correctly for some reason.
Without seeing the code it's hard to tell what the problem may be. I'm wondering if there's one of the old-style line continuation characters that may be breaking the #openport handler somewhere in your scripts.

Entry not found in object buffer error in leasing quotation

i am getting following error in SAP CRM 7.0 in quotation level.
when i am entering financing product in quotation.
Item 200 Entry not found in object buffer @5F\QNo long text exists@ Dates Administrator
Item 200 Entry not found in object buffer @5F\QNo long text exists@ Administrator

thank for your reply
At least we found out message class of this message.
From your given Function module we could identify that it giving information message, but we are experiencing error of object buffer related message.
In error it showing sub object as "Dates", can you please guide us to elaborate this further.
Regards,
Vikil

Entry not found in object buffer

Hi,
When we create service desk message we are getting Entry not found in object buffer error error. Can you please help me out to resolve this issue.
Thanks

Hello again,
Is it a customized support message (e.g. ZLFN for instance) or the standard one ? If customer message, check your action profile... You need to have a copy from the standard action SLFN0001_ADVANCED_UPDATE_DNO.
Hope it helps.
BR.
Stéphane.

Getting error : " not found Number object J_1IDEPINV "

Hi SAP Expert,
When I am posting Excise Invoice at Depot using J1iJ, i am getting the error : " Error in allocating Depot Invoice number Interval not found Number object J_1IDEPINV " when trying to Save.
Already checked that I have maintained the number range for object J_1IDEPINV in J1i9 for my series group. But I am still getting the same error. Any clue ?

You would have maintained the number range for the required series group but ensure that it is maintained for the current year.
thanks
G. Lakshmipathi

Funds mngt - Number range 01 not found for object BULI_DOCNR

Hi all
need some urgent help to crack an error am getting while creating a budget in funds management.
the error am getting is
"Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
I have maintained the number range in
Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
But am still getting the error....
will really appreciate some help on this
thanks in advance

The number range object refers to "FM budgeting line item number "
Are you using Former budgeting or BCS ?
Try t-code- ok11 and ok91 under former budgeting.
Thanks
Siva

Interval not found number object J_1IINTNUM.

<b>Dear friends,
During creation of excise invoice(t code J1IIN) i found
Error in allocating int. doc number
Interval not found number object J_1IINTNUM.
PLEASE HELP
Ranjan</b>

Dear Ranjan,
Go to transaction SNRO enter J_1IINTNUM -> click on Number ranges pushbutton option in the applicaiton toolbar -> Click on Change Interval pushbutton -> Maintain Number Range Interval and save.
Regards,
Naveen.

Property not found in object??

Similar Messages

Maybe you are looking for