Protecting site and reducing default kernel queue length

Hi!
This could be more for BEA support, entering this for far too busy client delivery manager.
In our setup we sometimes 'loose' PROD due to running out of (doubled) iPlanet service threads. After analysis it looked, that by reducing a problematic application (doubled) weblocig server(s) default kernel queue to lowest value of 256 the PROD could be 'protected'.
The application is controlled by another service and their tech people are worried is it safe to reduce the kernel queue to lower value.
According to initial testing on lower environments, this leads only that webserver thread is not reserved, due to bounced request. If the queue is full, this results error in logs and immediately returned (failed) request. After requests time out or if requests are served ok, the normal processing seems to take place.
Is it ok to reduce the kernel queu e for badly behaving applications? Are there alternative solutions recommended?
The downstream service is reluctant to make the change, because documentation recommends (weblogic 8.1.5) not to mess with the default settings.
Alternative solution with own webserver(s) for this service has been studied and does not really seem as an option.
Best regards,
Pekka

Hi,
We need to ensure the data integrity, please consider to design your azure storage queue logic, please have a look at this article:
http://azure.microsoft.com/en-gb/documentation/articles/storage-dotnet-how-to-use-queues/
Regards

Similar Messages

  • I try to log in to password protected sites and nothing happens but works fine on Internet Explorer. Can't get past login page. I even had to use Internet Explorer to login to ask this question!

    I try to log in to password protected sites and nothing happens but works fine on Internet Explorer. Can't get past log in page. I even had to use Internet Explorer to login to ask this question!
    On the page where you enter username and password after entering and pressing "Log in" the page just stays in place. If you look at the error log you see
    "Warning: Unknown property 'border-radius'. Declaration dropped.
    Source File: https://support.mozilla.com/media/css/common-min.css?build=3fabbc0
    Line: 1"

    Make sure that you do not block the referrer.
    * http://kb.mozillazine.org/network.http.sendRefererHeader
    Also make sure that you do not block cookies in Firefox or the firewall.
    * [[Cookies]]
    * [[Enabling and disabling cookies]]

  • Password protected site and gallery: no go

    Hi,
    i'm trying to publish a password protected site to mobileme. The site will contain links to mobileme galleries (password protected too).
    first issue: i can't add a protected gallerie to iweb, iweb doesn't show it. After removing the protection ("visible to everone") it works. After setting up the site, i turned on the protection again.
    Now my browser ask for the password for every gallery on the page (it's the same user and password for every gallery and the site).
    I don't think, that my visitors will like that...
    Michael

    Michael ~ If you prefer not to wait for a possible specific suggestion here, MobileMe live chat support is now 24/7 — see this announcement. Other Apple support options are here.

  • Creator Startup problem: Password Protected Site

    Hi, does anyone know why this happens. I've been using this version of creator for a few months and now every time I startup it pops up a box with the title Password Protected Site and asks for a username and password. If I keep pressing cancel it goes away but I need to do that like 20 times. I've tried my sun developer password - doesn't work either. Does anyone know what the password is?

    Hey,
    after installing Netbeans 5.5 in a VMware environment (Version 5.5, Host: Ubuntu 6.10, Guest-OS: Windows XP) i was able to reproduce this problem.
    In my environment i'm behind a proxy, which is automatically configured via Internet Explorer.
    After getting this weird "Password protected site" popup i remembered cealex solution and tried my Proxy authentication. Et voila. it worked (i had to put it in twice!!!). So i think, whenever it has a network connection it tries to download new contents for "Articles & News" and "Blogs".
    I feel that it is just a weird popup header ... ;-)
    I'm also a newbie to Netbeans.
    Greets,
    Fred

  • VM exhibiting 100% disk busy time, large disk queue lengths

    Hi everyone,
    We have a .VHD workload residing on a logical 2 x 136Gb RAID1 mirror pair of disks.
    The .VHD file is 130Gb (with 70Gb of free space)
    The Virtual Machine is running Windows 2008 R2 SP1, 4 cores and 8Gb of RAM and is exhibiting 100% disk busy time and disk queue lengths of anywhere between 14 and 44
    I'm assuming this is because there is virtually no disk space on the logical drive. Ops Mgr 2012 R2 reports high memory pages/sec
    So we backed up the .VHD workload, broke the RAID1 Mirror and inserted 2 x 300Gb  as a RAID1 mirror and restore the .VHD / VM
    The Logical disk has 50% free disk space, however the VM is still exhibiting 100% disk busy time and the above disk queue lengths.
    It is running on a Windows Server 2008 R2 SP1 HP Proliant Server running the Hyper-V role under Server Core
    Any ideas most appreciated.

    Hi,
    The mirror array doesn’t improve the disk performance but only for the disk redundancy, base on my experience some application frequent operate the large small files often
    can use the large disk resource, if you can’t sure the high disk IO cause by the guest vm or host computer, you can use the Resource Monitor first to identify which process handled the high disk resource, then do the further troubleshooting:
    The third party Resource Monitor use example:
    How to use the Resource Monitor in Windows 7 & Windows 8
    http://www.7tutorials.com/how-use-resource-monitor-windows-7
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • All "Site Content and Structure" default views incorrectly showing "There are no items to show in this view"

    Hi All,
    On my SharePoint Online site (Office 365) all my “Site Content and Structure” default views are showing “There are no items to show in this view”. For example the “Checked out To Me” view shows “There are no items to show in this view” (shown in screenshot
    below). I know this is incorrect and should show at least ten items that have been checked out to me for over two months. I am also a member of the Site Collection Administration and Owner groups.
    What I am trying to do is view all the "Checked Out items" within a Site Collection including it's sub-sites.
    Is there a feature that needs to be activated to get the correct information from the “Site Content and Structure” default views?
    I hope you can help
    Colin

    Hi Colin,
    As I understand, all “Site Content and Structure” default views are showing “There are no items to show in this view” in your SharePoint online site.
    Check things below:
    1. Go to site content and structure logs in site setting to check if there is correct information.
    2. Create a new site collection to check if there are items in Site Content and Structure.
    3. Switch another computer to check if it can work.
    If the issue still exists, I recommend you to post it in the O365 forum.
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Capturing/dumping active thread, queue length and throughput to a file

    Hi,
    I would like to capture active thread information, queue length, and throughput
    information to a file for later analysis. This would be similar to setting the
    verbosegc flag at the java startup to dump the heap space memory usage.
    Is there a way of doing this?

    Just like with heap info, you can use weblogic.Admin GET functionality to query
    WebLogic runtime information.
    To see which bean types you need to query and what properties are available you
    can deploy these 2 jsp's on your weblogic:
    http://dima.dhs.org/misc/listMBeans.jsp
    http://dima.dhs.org/misc/showMBean.jsp
    and point your browser to listMBeans.jsp - the rest is self-explanatory.
    Mark Officer <[email protected]> wrote:
    Hi,
    I would like to capture active thread information, queue length, and throughput
    information to a file for later analysis. This would be similar to setting the
    verbosegc flag at the java startup to dump the heap space memory usage.
    Is there a way of doing this?--
    Dimitri

  • Another question about throughtput and Queue Length

    I do not exactly confirm the meanning of throughput and Queue Length in
    the console of performance of weblogic server.
    AnyOne can give me a explanation? Thanks a lot!

    If you look at the ExecuteQueueRuntime MBean
    (you can use these 2 jsp's:
    http://dima.dhs.org/misc/listMBeans.jsp
    http://dima.dhs.org/misc/showMBean.jsp
    or Sun's HTMLAdaptor: http://dima.dhs.org/misc/StartHtmlAdaptor.jsp
    to browse WLS MBeans.
    PendingRequestCurrentCount
         Returns the number of waiting requests in the queue.
    ServicedRequestTotalCount
         Returns the number of requests which have been processed by this queue.
    ExecuteThreadCurrentIdleCount
         Returns the number of idle threads assigned to the queue
    PendingRequestOldestTime
         Returns the time that the longest waiting request was placed in the queue.
    Eric Nie <[email protected]> wrote:
    I do not exactly confirm the meanning of throughput and Queue Length in
    the console of performance of weblogic server.
    AnyOne can give me a explanation? Thanks a lot!--
    Dimitri

  • While surfing I got a popup from FF [ostensibly] that said it had to "protect me" from a site and that I had to pay for the service. What is going on? I have no add-on like that. Thanks

    I got a popup which wanted to protect me and said I had to press a button to get there site to pay. I pressed the button and there were different plans to pay for. $9.99 for a year etc. I just left. But how did that happen. Sorry I didn't write down the info. it looked like a scam to me and I just hightailed it outa there.
    BTW also having continuous problem with watching videos [mostly youtube] and other downloads... they just stop in the middle of the download. Any ideas?
    Thank you all again.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    You can also use "Forget About his Site" in the right-click context menu to remove all stored data from a specific domain.
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    *http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • If I open more than one tab and then sign out of a password protected site in one tab, it will log me back in if both tabs are not closed and I return to the site. How do I change this?

    If I open a firefox browser and then I were to open another tab (e-mail for example) which is a password protected website, and then I sign out of my e-mail in the tab and close that tab, I can still access my e-mail without having to re-enter a password by going back to the e-mail website from the brower that is still open.
    ex. If I open google and am looking at something so I open another tab to go to hotmail. I then sign out of my hotmail and go back to the google site. If I then go to hotmail from the google site, even though I have signed out it will take me back into my e-mail unless I have closed all tabs upon signing out.
    Is there a way to make it so that if you sign out in one tab it completely signs you out?

    Make sure that Firefox closes properly to prevent session restore from restoring a crashed session.
    *"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
    *"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
    Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.

  • Default Sites and subscriptions with SAP installation package

    Hello,
    Does anyone knw what are the default Sites and subscriptions provided with SAP installation package - i.e. in client 000, 001.
    Rgds
    Priyanka

    You can go to Tcode SMOEAC and check.
    Pls reward points if helpful.
    PB

  • Monitor BizTalk Host Queue length and suspended msgs w/SCOM

    First, I hope the BizTalk forum is the right place to ask this. Maybe I should try the SCOM forum as well.
    I'm trying to create two monitors (Not rules, as we want the alert to be automatically healthy when under treshold again and we want to see the status state as well) in SCOM based on performance counters for BizTalk Msgbox Host Queue Length and suspended
    msgs. My question is what I should use as target (class) in SCOM? And can I use "All instances" of the counter or must i create a monitor for each instance (This is a lot of work and not very dynamic)? We want to monitor all the instances/hosts with
    different tresholds, so the first thing I did was to target the "BizTalk Host" class, so I can do overrides to different hosts.
    The problem with this is it will generete a alert for all hosts if one instance is over treshold. I also tried to target the "Run-time role", and this actually works better, but not perfect as i cannot set a treshold for just one instance/host
    then and it will close the alert if any other intance is under treshold.
    Anyone have experiences with SCOM and monitoring Hosts queues and/or suspended msgs as monitors? 
    thank you in advance for all suggestions!

    I would suggest to look into spool table and its size . As per recommendation it  count should not be greater than 3000 per server .
    Its easy way to monitor the performance counter "Message Box:General Counters /Spool size".you can execute one the following SQL in the BizTalk message box database.
    You can have a counter for spool table size and manually you can use below sql query to find out the count.
    SELECT count(*) from SPOOL WITH (NOLOCK)
    SELECT top 1 rows  FROM sys.partitions WHERE object_id = object_id(‘spool’)
    Note :The NOLOCK keyword is important in first query, you don’t want to put any locks in the spool table while measuring the row count.  The second query is the one used by the performance counter “Spool Size” using the stored procedure
    “MsgBoxPerfCounters_GetSpoolSize”
    Reference :http://msdn.microsoft.com/en-us/library/aa561922.aspx
    Thanks
    Abhishek

  • Protected access and Default access

    hi all,
    Can you tell exact difference between protected access and default access.
    Thanks in advance.

    default (for classes*), also known as "package" or "package private": accessible from within that class and other classes in the same package.
    protected: accessible from within that class, other classes in the same package, and subclasses.
    *Note that for interfaces, the "default" access is pubic, not "package private".                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Thread Count Queue Length in Negative and Too many standby Thread

    We are using Weblogic server 9.2.2 with 1 admin server and 4 managed server . Currently in one of the servers I could observe that there are around 77 standby threads.
    Home > Summary of Servers > server1 > Monitoring > Threads > Self-Tuning Thread Pool
    I could see that the "queue length" is negative (-138) and self tuning standby thread count is 77. Large number of threads STANDBY thread persists during the busy time of the business hours where as other servers are fully utilized.
    Is it normal to have negative queue length and so many STANDBY threads? As for JMS queue negative oracle had already acknowledged that it is a bug. Thanks.
    Edited by: 855849 on May 1, 2011 7:19 AM
    Edited by: SilverHawk on May 12, 2011 8:12 AM

    Yesterday an Oracle Consultant acknowlegded that it is a bug. There was a patch issued for Negative count in the JMS queue count and now this. Thanks for the reply by the way.

  • Copy Queue Length - All of a sudden one server having communication issues

    We have 4 servers in a DAG (3 at site A and 1 at site B).
    Of the three servers at site A two of them always show 0 copy queue length.  Recently one of the servers started to show a back log and we are seeing the following in the event viewer.  We see this error when this problem server connects to either
    of the other two in the same physical site.
    The log copier was unable to communicate with server 'ABC1'. The copy of database 'DB2\ABC1' is in a disconnected state. The communication error was: An error occurred while communicating with server
    'ABC1'. Error: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. The copier will automatically retry after a short delay.
    At night the queue goes back to 0 and we start over again.  Currently the problem server only has passive copies, we moved of active just in case.
    I have tried using the MAPI network to replicate (Different physical NICs and switches), that was just worse.  Also tried deactivating the primary NIC in the team and using the secondary that is connected to a different core switch.
    Any ideas? 

    Hi,
    Basic on your post, I understand that one DAG member always show 0 copy queue length with error “Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. The copier will automatically retry after a
    short delay”.
    If I misunderstand your concern, please do not hesitate to let me know.
    Please run below command to double check the connectivity between server:
    1. Use netsh int tcp show global.
    2. Use netsh int tcp to set global autotuninglevel=disabled.
    3. Use netsh int tcp to set global chimney=disabled.
    4. Use netsh int tcp to set global rss=disabled.
    Meanwhile, follow below steps:
    1. Please use the Get-DatabaseAvailabilityGroupNetwork cmdlet to check if DAG network is ok.
    2. Run the Update-MailboxDatabaseCopy -Identity xx cmdlet to seed a copy of a database.
    3. Restart the Microsoft Exchange Replication service.
    4. Please ensure that port 64327 is open.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

Maybe you are looking for