Provisioning Problems with Beta 7

I read the other thread on this and tried those things.
I'm still having problems deploying with Beta 7.
I followed the instructions on the dev site (the pdf).
I generated a new generic wildcard AppID called ##########.com.mycompany.*
Then I generated 3 new provisioning profiles for my three apps .
All three provisioning profiles now have the same wildcard
app id (which makes me uncomfortable but thats what the doc says to do)
In my project/getinfo/build I have "iPhone Developer" in the Code
signing entity under "Any iPhone OS Device".
In the code Signing Provisioning Profile I chose the profile I made
for my first application.
In target/myapplication/getinfo under properties under identifier I have
##########.com.mycompany.*
In info.plist under Bundle Identifier I have ##########.com.mycompany.*
Build and go gives me the unexpected error error from Organizer.
(0xE800..01)
So I'm obviously doing something wrong. I see the provisioning profile
(I'm only trying the first one at the moment) in the organizer and it is checked.
One thing that confuses my is that on the portal all three of my profiles
now have the same ########### prefix. This doesn't seem correct as how
am I going to differentiate between them in the future (for uploading, etc)?
Help! Thanks!

OK, I got it fixed. The instructions said to use an appid of ######.* and I was using #####.com.mycompany.* which, of course, isn't the same.
I also needed to remove the bundle id from plist and the target and just put in any string I wanted. I'll worry about that all appids are the same later...

Similar Messages

OIM Provisioning problem with EBS

I use connector to test provisioning function with EBS, and it works.
Besides,there have 2 CreateUser storedprocedure in EBS, and one for SSO(we
can set GUID value when create user). I found the connector used
the non-SSO storedprocedure. The question is can I modify the config files(
attributemapping_prov.properties, config.properties,storeprocedures.properties)
to utilize the SSO storedprocedure to finish the create operation during provisioning
(I want to specify GUID by myself when create EBS' user through OIM)?
I just tried my opinion, but the logs prompt SQLException.I do not know why?What should I do?
Any suggestions will be helpful.
Thanks!

You could definitely write your own connector. We faced a similar problem and solved it by writing our own EBS Connector.
I haven't explored the exact capabilities of the standard EBS connector so you might be able to do this by configuration. My general experience is that it is often better to bite the bullet and create your own connector rather than wasting time trying to get the out of the box connectors to do advanced operations.
It looks like the config files are more for defining the type and number of attributes that is used during user creation rather than control which stored procedure should be called.
Good luck
/M

CUCM 10 Self Provisioning Problem with TAGs on Universal Device Template

Hi friends.
I've been provisioning IP Phone by Self Povisioning. The phones were provisioned almost perfectly. I notice the TAGs that i filed up on Device Template (look above), are not "translated" on Device Phone.
Universal Device Template
The Tags on Universal Line Template comes perfectly to Line Description.
Had you ever seen something like this?
Kind Regards
Fernando Penteado

Hi folks. I could identify the problem with Variable and TAG. In order to Self Provisioning works fine, we need to mark Owner User on Universal Device Template.
Look that.
Thanks

Problem with Beta 2 and Visual Studio 2013

Hello , i created an app a few months ago which was almost finished and contained 50-60 images i think. I used NEW images this time and re-created the app from the complete beginning.
Since the Beta 2/VS 2013 my app doesn't display some images. Everytime the same type of images and at the same places ( i mean , not background for example.)
And very important : In the Siena app everything is OK but when i try to preview my app in VS 2013 the problem occurs.
Please help me because i tried many things without success.
Thank you !
Let me show you an example ( With image Siena app , without VS2013 )

>Do I need to install any additional runtime on the machine I am running the application ? Any help is appreciated.
You do need the runtime DLLs installing if you're not statically
linking it to your application.
http://www.microsoft.com/en-gb/download/details.aspx?id=40784
Dave

Problems with beta version of firefox

I just tried to send you feedback, but the button is not working. Here is the message.
I understand version 5.0 is still in Beta, so I hope you can fix this problem.
When I search on Google then visit something on the list, I can't click the back button, because it is grayed out. The only way I can get back is to repeat the search, and then Google complains that I'm searching too much and presents a captcha to prove I'm human.
I couldn't find a way to bookmark all tabs either.

Absolute uses the full url to target files...
Absolute: http://www.yoursite.com/yourpage.html
Relative: yourpage.html or pages/yourpage.html or etc...

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

JaillotJb wrote:
I download the iOS7 Beta even if I was not a developper.
if you downloaded it and are not a developer, then we are not allowed to help you here. sorry.

Problem with provisioning and external SQL server connection

I am configuring IPAM 2012 R2 on a our management server. Completed the first step by enabling the feature. No issues.
Now I am on the Provisioning IPAM step. I get to the Configure Database step...
I choose Microsoft SQL server,
What should those values be in the Server name and Database name fields. Instructions show fqdn or ip address but that doesnt seem to be working for me.
I get the following error at the end of the Provisioning IPAM wizard,
IPAM Deployment failed with the following error.
Failed to connect to database server. Check the database name, connectivity and remote access.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
You can restart this provisioning wizard from the IPAM overview page.
From the management server I have tested the SQL Connection with a udl file. I used myServer\myInstance and it works. It reports that I have made the Connection to the server and database with the sql credentials i have provided.
Thanks

Ran
into a problem with connecting to the DB on the SQL server from the IPAM server. The Dba and I checked the target SQL instance was enabled TCP and listening on a valid TCP port. SQL server was set to use port 1443 for incoming connections.
IPAM was set by default to use 1433.
Also used
netstat-n to identify issue and verified 1443 on SQL server was
being used. Made the correction under the IPAM provisioning wizard and connected to the database. Fixed.
Important note I was able to connect to the database with a .udlfile
without any issues
Also note that 2012 R2 IPAM only supports 2012 SQL Enterprise. Why?

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

I have a problem with the icon in the menu bar MacBooster Beta 3 I can not delete

I have a problem with the icon in the menu bar MacBooster Beta 3 I can not delete
www.advancedmaccare.com
and installed and uninstalled the program and past cleanApp or ccleaner programs and nothing works
<Link Edited By Host>

Beta = buggy software. You need to contact the vendor.

CRVS2010 Beta - Problems with printing Crystal Reports for VS 2010

Good afternoon,
We have the following problem, we used the version of Crystal Reports that came integrated with visual studio for several years. But we are migrating to the version of Visual Studio 2010, and we are using the version of Crystal Reports for this same version, running on screen is correct, and run all the reports, but in print there is a failure we could not solve. Our customers use printers dot matrix as the "Epson LX300 +", but when you print the report leaves the impression defective in the previous version of Visual Studio 2005 "The impression is quite clear, we have attempted to overcome this problem with the options of PrintMode with activex and pdf in the CrystalReportViewer, and RenderingDPI option with multiple values. Obviously when using other types of printers such as laser or inkjet printing is perfect, but due to cost our customers use the printers mentioned. The server where the application is Windows server 2008 and client computers are windows xp, windows 7, windows vista. As network hardware and printers are working properly, and from other applications and from the other server with versions of Crystal Reports If anyone knows how to solve this problem I would like to receive support and ideas.
Thanks
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 11, 2010 3:42 PM

I have a question about printing reports. We are using VS2008 and the CR reportviewer with printmode = ActiveX. Many of our users absolutely hate the number of steps they must go through and the time it takes to print a Crystal Report when printmode = PDF. In our environment several times per day, we need to produce hard copies of reports for legal reasons. Making the users first render the report, then had it off to Adobe to print simply takes too much time which is why we are using the ActiveX print control.
We recently started looking at VS2010 and discovered the issue with the unbundling of Crystal Reports. We have not downloaded CR for VS2010 yet.
My question is this: for VS2010, what happened to the ActiveX print control? I read somewhere that it was going to become some WPF-type thing but there weren't many details about that. So when a user clicks on the print button in the Crystal Report Viewer intended for VS2010, what can they expect? Can they still print straight to a printer (is there something that gives them this capabitliy like the Active X print control did?), or has that capability been deprecated and they have to go through PDF? Thanks in advance for any information you can give me.

LR4 Beta...another problem with using Lens Correction

Not sure if it's me or the beta. I'm trying to do a lens correction on a file that was edited in CS5. The photos were taken in 2009/10. They are importing as Process 2012.
I'm using the Lens Correction in manual. About 15 seconds after I start using the sliders, my LR stops working and I have to close the program (white outs the screen with the note saying the program has to be closed).
I do know there can be problems with a beat so I wanted to post this problem in case it is a bug in the system.

I have the same probem if I try to push the scale slider down below about 87%. It is quite annoying when it keeps happening on the same photo. It's not something I use a lot but it can be necessary with tall buildings when the correction pushes the top out of the frame.
JW

Easier and better ways to solve current problems with Acrobat?

Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
Regards,
Marc

Sorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
Regards,
Marc
Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
Re: Easier and better ways to solve current problems with Acrobat?
created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
Thanks,
David
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Im about to buy a macbook pro. but I dont know if there are too much techproblems with the retina model,such as overheating, malfunction of the fans, screen problems?. or is the macbook pro non retina in tech problems a better option? thanxa lot

Im about to buy a macbook pro. but I dont know if there are too much techproblems with the retina model,such as overheating, malfunction of the fans, screen problems?. or is the macbook pro non retina in tech problems a better option? thanxa lot

I have a brand new rMBP and have not seen any of those problems.

Does anyone else have problems with iTunes 10.3.1 BETA?, Does anyone else have problems with iTunes 10.3.1 BETA?

Installed iTunes 10.3.1 on Mac and then all tunes vanished from my iPhone 4. I hooked the phone to the Mac and Synced them together and everything returned to iPhone. Next morning the problem was back. I had to delete iTunes and reinstall an older version from my Time Machine backup. It now appears to be working. Has anyone else had problems with this?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
BTW, iTunes 10.3.1 is not a beta release. Only the iTunes in the Cloud service is beta.
Regards.

SB Live 24bit external problems with windows 7 beta driver

Hi, I have a problem with my soundcard with the windows 7 beta driver. An unwanted sound come out when I'm doing something like chatting with Yahoo Messenger or buffering Youtube. I don't know what makes it like that, can you guys help me out, please
Thank you

Maybe you could start by donating something
I'm giving you something Creative would never do, so I think I deserve it, don't you think
Doesn't matter if it is $2 or $5.
All these Vista Support Packs prove my knowledge and are true modifications, not like the current Youp Pax crappy releases from a dumb person who doesn't even know how a INF file works.

Provisioning Problems with Beta 7

Similar Messages

Maybe you are looking for