Proxy redirect problem

I'm having a redirect problem going through a weblogic proxy. An app I was using appears to be redirecting the browser always to localhost:7121 which won't work with access via the my domain.
To explain fully I set up a test JSP page which outputs request.getRequestURL().toString() so I could trace what was happening. The weblogic configuration is explained below:
I'm using Weblogic 8.1 sp5. I've setup a 4 instances: a proxy (port 7120), redirector (port 7121) and cluster (two instances running on 7131, 7132)
If I navigate to:
http://localhost:7120/myapp/test.jsp my test page outputs: request.getRequestURL().toString() : http://localhost:7121/myapp/test.jsp
and again to:
http://localhost:7131/myapp/test.jsp my test page outputs: request.getRequestURL().toString() : http://localhost:7121/myapp/test.jsp
or
http://localhost:7132/myapp/test.jsp my test page outputs: request.getRequestURL().toString() : http://localhost:7121/myapp/test.jsp
The output is always the same ... it always says the requestURL is from localhost:7121 the redirector?
Can anyone help explain why I always get the same output? It is completely baffling me.
Thanks,
Matt
Edited by: user5673380 on Oct 15, 2008 3:52 PM

The problem was caused by incorrect configuration of FrontEndHttpPort and FrontEndListener and FrontEndHost in the cluster configuration. These values were incorrectly during config wizard install.

Similar Messages

  • Reverse Proxy Redirection Problem

    Hi all
    recently I installed sun one app server 8.1 sp2 as back end server and sun one web server 6.1 sp5 as the front end.
    I also installed the reverse proxy plugin (provided by sun) correctly. the infrastructure is something like this:
    web = http://aaa.com/mypath
    app = http://bbb.com/mypath
    client => web => app server
    so when client type http://aaa.com/mypath, it will eventually executed http://bbb.com/mypath, but in the client browser still maintain http://aaa.com/mypath
    so far so good.
    but when the client executed http://aaa.com/mypath/myredirect.html (where myredirect.html is javascript redirection to certain html in my app server), the web server will execute http://bbb.com/mypath/myredirect.html, which eventually the html will be redirected to http://bbb.com/mypath/myfinalresult.html.
    the problem is now on the client browser the url becomes http://bbb.com/mypath/myfinalresult.html. all i want is the url to be pointing to web server, that is http://aaa.com/mypath/myfinalresult.html
    how to solve this problem? is it possible to do reverse mapping with passthrough library? any help is greatly appreciated! Thx !!
    Cheers,
    kami

    Hi All,
    Good Morning. Please calrify the below issue about reverse proxy. ( The redirection is not happening from WebServer to AppServer)
    - I have installed the one WebServer with below configuration.
    - Installed Sun ONE Web Server 6.1SP6 with Sun ONE Web Server 6.1SP3 Reverse Proxy Plugin.
    - This is my obj.conf file:
    NameTrans fn="assign-name" from="/wps" name="passthrough1"
    <Object name="passthrough1">
    Service type="magnus-internal/passthrough"
    fn="service-passthrough"
    servers="http://<AppServer>:9081/wps/"
    </Object>
    - This is magnus.conf file:
    Init fn=flex-init access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length%"
    Init fn="load-modules" shlib="/opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"
    Init fn="load-modules" shlib="/opt/SUNWwbsvr/plugins/passthrough/libpassthrough.so"
    When I am trying to access the WebServer URL http://<WebServer>:<port>/wps/ is not redirting to AppServer URL i.e (http://<AppServer>:9081/wps/).
    - Please find the log file as below :-
    [26/Nov/2006:10:52:11] warning ( 5727): for host 172.16.5.63 trying to GET /wps/, send-file reports: HTTP4142: can't find /opt/SUNWwbsvr/docs/wps/ (File not found)
    - I am confusing it searching the "wps" directory under the doc root directory.
    Kindly help to suggest me to resolve the issue.
    Thanks a lot in advance.
    Best Regards
    Elayaraja.K

  • Proxy redirection

    I'm trying to get a Cisco IPS to download updates using a Bordermanager box
    and according to Cisco tech support the IPS is unable to download the
    updates because Proxy Redirection is not working on the Bordermanager
    server.
    I checked the BM server but I couldn't figure out how to configure proxy
    redirection. Can you tell me how to enable proxy redirection?
    The IPS from what I can tell is a linux box.

    Hernan,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • I recently updated Firefox and now it will not open. It says there is a proxy server problem.

    I was requested to update the program and now it says there is a proxy server problem.

    Hi:
    You can try this COMPRESSOR TROUBLESHOOTING document:
    http://docs.info.apple.com/article.html?artnum=302845
    Hope it helps !
      Alberto

  • File Proxy Service Problem on errors

    In continuation of this thread...
    File Proxy Service Problem on errors
    We are now facing two problems.
    1.The proxy service is executed twice
    2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.
    Not sure how to fix :(

    1.The proxy service is executed twice Check if this is due to transaction timeout issue as discussed here. Re: OSB File polling working twice with the same file
    2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.I am not sure wehther you have any option here. You can check with support. Alternatively can raise notification mail with the timestamp and some file/business identifier from the file. The support person can then open the file from error directory to verify the file/business id in the file or educate the support user that the files will have a prefix

  • AS2:Seeburger Proxy redirect error?

    Hi Guys,
    We are getting the following error when trying to post the file to the AS2 server.
    Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 307 Proxy Redirect # , SEEBURGER AS2: 307 Proxy Redirect #
    My AS2  receiver adapter is configured with the below parameters
    Server: FQHN
    Port: 80
    URL Path: /as2receiver.aspx
    HTTP Timeout: 120
    Sign: MD5
    Encrypt: 3DES
    MDN Mode: No MDN
    Content Type: application/octet-stream
    Payload Mode: MainDocument
    unchecked: Dynamic attributes
    any help or suggestions would be appreciated
    Thanks,
    Srini

    Hi Srinivas,
    Thanks for your quick reply. We are not using any proxy server. I have tried with the port 6263 and i am getting the error as below
    Message entered AF MP exit bean and will be passed to the JCA adapter now
    SEEBURGER/AS2: Received order from system.
    Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: java.net.ConnectException: Connection timed out: connect # , SEEBURGER AS2: java.net.ConnectException: Connection timed out: connect #
    what are the port numbers that are generally used for the AS2 communication?  any help would be appreciated
    Thanks,
    Srini

  • Dynamic form "Cancel" redirect  problem in frames - bugfix?

    My question: Is there a "long run" down side to my implementing this modification to style.js?
    The below post by Ionut:MX Division Support Specialist worked for me as a solution to a current form "click cancel" redirect navigation problem:
    When a DWtoolbox dynamic form wizard form is placed on a page within frames, clinking on cancel does not return a user to the list that sent them to the form. The user is sent somewhere else.
    Begin Ionut post-------------
    If you don't need to add extra parameters to the "Edit" button, you can solve the redirect problem by editing the "/includes/skins/style.js" file and replace:
    nxt_list_edit_link_form(this, myinput.previousSibling.href);
    with:
    nxt_list_edit_link_form(this, a.href);
    End----------------------
    Thanks Ionut for the tip and anyone in support for letting me know if this is a safe mod for the long run,
    Steve M

    Hi Marny,
    Hello Steve. I am new to Adobe & very confused. You seem to grasp the program very nicely, please help Me?
    I´m not not Steve, however -- what problem do you have exactly, and is this problem related to the "Adobe Dreamweaver Developer Toolbox" extension or related to Dreamweaver ?
    If it´s related to ADDT, please describe your problem by starting a new thread -- if it´s related to Dreamweaver, please post your questions in the general Dreamweaver forums.
    Cheers,
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • I want to downgrade from ios7 on my ipad mini-it seems to have affected certain websites which I now can't access due to 'redirect' problem

    I want to downgrade from ios7 on my ipad mini-it seems to have affected certain websites which I now can't access due to 'redirect' problem....

    Google is your friend. You have to move very quickly on this. It can't be discussed how to do it on this site and is not supported.

  • Proxy Authentication Problems

    Firstly good morning/afternoon/evening to all of you.
    This will be my first post on these forums, and now that I have found them I hope they will be of some help to me in the future.
    I work for the largest media company in South Africa, specifically as an Apple Technician. The company owns/runs numerous magazines and newspapers thus we have quite a large amount of Apples in the building/s.
    Now on to the problem at hand.
    Naturally in this corporate environment we have a HTTP Proxy.
    Problem is with a Powerbook that just won't authenticate to the proxy. Everytime you try and do a Software Update or use Safari it just rejects the details and brings the username/password box back up.
    Things that do work...
    1. The machine does have an IP, so network connectivity is fine from the DHCP server side.
    2. Email works perfectly.
    3. The Proxy is working fine, with the same username details on another machine.
    What I have done...
    Well basically everything. Normally these sort of issues are related to the Keychain having trouble, so I've deleted all entries from the Keychain, even resetted it to defaults and then restarted but still no luck.
    When I try to do a software update it just brings up the Network Diagnosis box.
    Also tried creating a new location, which didn't help.
    Also tried deleting the relevant (at least what I think would be) preferences files and that just ended up nailing some other stuff I'll need to fix (like locations)
    I'm hoping somebody out there has had this before, because I really don't want to reinstall because of this.
    Looking forward to your replies!

    Just to add to this thread as I think my situation is similar. I am in a corporate environment as well and on my windows pc am set up to use a wpad.dat file for autodiscovery of proxy settings.
    I have successfully managed to configure Firefox 1.5 to get to the internet by looking at the proxy.pac file and putting the ip address and port of the proxy server in as the http proxy (and setting all protocols to use that ip/port as well).
    Though when I set that same ip/port in the global properties settings for safari et al, it continually prompts me for my username/password but when I supply them it does not work. I have tried every combination of how to enter my username: domain\username, domain/username [email protected], etc.
    The end result is that I cannot reach the internet with safari or any other programs that rely on the global network settings (dashboard widgets,etc).
    Does anyone know a work around? This is my first post as well and am hoping to get some help.
    Thanks!
    dack

  • Proxy Server / http redirect problem

    I am trying to use a WLS instance as a proxy server for another WLS instance.
    I have configured the weblogic.properties file as follows:
    weblogic.httpd.register.proxy=weblogic.t3.srvr.HttpProxyServlet
    weblogic.httpd.initArgs.proxy=redirectURL=http://url:port
    weblogic.httpd.defaultServlet=proxy
    However, I try to serve the page, I get a 404 error.
    The odd thing is though, if I submit the URL without the page name, I am redirected to show the index listing of the remote server!
    Am I missing something?

    Hi Winnie Chow!
    I have an article that may contain some helpful troubleshooting steps for you regarding this issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • CSS Redirection problem

    Hello,
    I use a CSS 11500. I've problem of redirection HTTPS with Mozilla and Opera (it seems there are no problem with Internet Explorer).
    Mozilla use a URL http://www.example.com:443/blabla instead of https://www.example.com/blabla.
    Here my CSS configuration
    ssl-proxy-list SSL-PROXY
    ssl-server 20
    ssl-server 20 cipher rsa-with-rc4-128-md5 XXXXXXXXXXXXXX
    ssl-server 20 vip address X.X.X.X
    ssl-server 20 rsacert certXXXX
    ssl-server 20 rsakey keyXXXX
    ssl-server 21
    ssl-server 21 cipher rsa-with-rc4-128-md5 X.X.X.X 80
    ssl-server 21 rsacert certXXX
    ssl-server 21 rsakey keyXXX
    ssl-server 21 vip address X.X.X.X
    ssl-server 20 http-header prefix "SSL"
    ssl-server 20 urlrewrite 1 www.example.com sslport 443 clearport 80
    active
    Thank you in advance for your help
    Cedric

    Indeed, the problem isn't the web navigator after to deep with tcpdump.
    The problem is it misses the / at the end of the URL !
    https://xxx.example.com/blabla => the redirect doesn't work => http://www.example.com:443/blabla
    https://xxx.example.com/blabla/ => the redirect work !!
    Our customer don't wish modify their webserver apache. It's possible to find a solution with the CSS ? With a specifiq redirector rule ?
    Thank you in advance
    Best Regards
    Cédric

  • Webgate redirection problem

    i have installed a webgate on a reverse proxy for weblogic
    i am not able to login, the browsers says it has gone in the loop.
    how to resolve this issue?

    I don't know whether the issue is common but I applied a patch for the apache webgate which resolved my problem. Forgot the patch number but I googled abt the issue and found some links... I had a different use case though not sure if its valid in your case.
    One more thing to take care is the preferred host in the access gate information in Oracle Access Manager. The redirection usually takes place to the value specified there.

  • Reverse proxy setup problems

    I am trying to setup a reverse proxy using iPlanet Web Proxy Server 3.6. I have followed the instructions in the manual which seems pretty straight forward but nothing is happening. I am getting no traffic at all between any of the boxes involved. I have been using apache before without any problems but wanted to move to something more scaleable as I would like to have multiple reverse proxys. Can anyone give any suggestions as to what might be wrong. Thanks.

    Have you tried thius technote ===>
    http://knowledgebase.iplanet.com/ikb/kb/articles/1173.html
    The reverse proxy setup requires regular mappings and reverse mappings. Regular mappings re-map the requested URL to the actual origin
    server. The reverse mappings re-map Location: headers coming back in 3xx redirections.
    In some cases, customers have sent technical support obj.conf files with the mapping entries in the wrong order. All of the
    "reverse-map" functions should be placed before the "map" functions.
    There maybe two causes:
    1.Hand editing of the obj.conf files
    Use the admin interface to create reverse proxy map entires.
    2.Old versions of Admin Server
    There may have been problems with creating reverse proxy maps in Proxy 2.x, which used Admin Server 2.x. This problem doee not
    occur with Admin 3.5.
    Example:
    NameTrans fn="reverse-map" from="http://www.news.com"
    to="http://kwikimart.mcom.com:8080/news"
    NameTrans fn="map" from="http://kwikimart.mcom.com:8080/news"
    to="http://www.news.com"
    NameTrans fn="map" from="/news" to="http://www.news.com"
    Note the "reverse-map" function appears before the "map" functions.

  • OHS to Weblogic Reverse Proxy configuration Problem

    Hi,
    Pls go through the following points and suggest.
    1. I have an Access Manager in place and I need to integrate it with Webcenter and Oracle Identity Manager.
    2. I have only one webserver in place which is reverse proxied for both the application servers(OIM as well as Webcenter) and only one webgate installed.
    Can I achieve SSO with this architecture? My doubt is while specifying the challenge parameter in Access Manager,how can i specify it?

    Thanks for the reply. Let me detail you regarding my configuration.
    1. One webserver configured as reverse proxy for two app serrvers(weblogic1 for webcenter and weblogic2 for Identity manager)
    2. My reverse proxy config in httpd.conf file are as follows
    ProxyPass /webcenter http://app1:8888/webcenter
    ProxyPassReverse /webcenter http://app1:8888/webcenter
    ProxyPass /xlWebApp http://app2:7001/xlWebApp
    ProxyPassReverse /xlWebApp http://app2:7001/xlWebApp
    3. Created two policy domains for /webcenter and /xlWebApp and Iam using form based authentication scheme.
    My Challenge parameters as follows:
    form: /am_login/login.html (am_login.war is deployed on both app1 and app2)
    creds:userid password
    action:/dummy.cgi
    Now the problem is whenever http://webserverhost:7777/webcenter is accessed,it should redirect to http://webserverhost:7777/am_login/login.html. But its not happening so reason being,after hitting the url it is not able to find the am_login.war in /webcenter on the appserver.Instead its deployed on the root "/" not inside "/webcenter".
    Samething is happening for /xlWebApp too. Can you suggest some configuration which would make my things work?

  • ACE: SSL termination, Probe and Redirect problem

    Hello,
    I have problem with three things: -1) SSL offload, -2) probe, and -3) server redirect.
    1) I made SSL offload like shows attached file with "show run". But during going to the VIP address by the browser: https://192.168.254.143 I get window with Java error: java.lang.NullPointerException - I have to click OK on this window and then can work fine. Without SSL offload I don't have this error message in window.
    When I have SSL offload I have following configuration:
    ssl-proxy service SSL
    key klucz.pem
    cert certyfikat.pem
    serverfarm host SFARM
    rserver S1 8080
    rserver S2 8080
    policy-map multi-match SLB-POLICY
    class SLB
    ssl-proxy server SSL
    Without SSL offloading I have only this:
    serverfarm host SFARM
    rserver S1 (without 8080!)
    rserver S2
    2) Right now I have two real servers and I send traffic to them by port TCP 8080. So I made probe to check TCP 8080 port availability.:
    probe tcp TCP_8080
    port 8080
    interval 15
    passdetect interval 60
    serverfarm host SFARM
    rserver S1 8080
    probe TCP_8080
    inservice
    rserver S2 8080
    probe TCP_8080
    inservice
    I want also check port TCP 6400 availability, and I only one from port 8080 or 6400 don't work - make real server unavailable. So must work TCP port 8080 ang 6400 togethet to treat real server as operational.
    So I want to make something like this:
    probe tcp TEST
    port 8080 and 6400 !?! - ofcourse It is impossible but I want to make config with this functionality.
    How to do this?
    3) I hant to make that when I write in browser https://bo.kw.coig.biz/ = https://192.168.254.143 I want to be redirected to one of real server on address: https://bo.kw.coig.biz/businessobjects/enterprise115/desktoplaunch/InfoView/logon/logon.do
    I made something like this:
    rserver redirect S3
    webhost-redirection https://%h/businessobjects/enterprise115/desktoplaunch/InfoView/logon/logon.do 302
    inservice
    serverfarm redirect REDIRECT
    rserver S3
    inservice
    policy-map type loadbalance first-match POLICY-TYPE
    class class-default
    serverfarm REDIRECT
    But this configuration dosn't work. I have in browser window with error messeging.
    How to do this?

    1/ this is a java problem.
    Java is telling you that it attempted to use a null pointer. You need to check with the people who created the java program
    2/ you can configure multiple tcp probe, one for each port you need to monitor and assign all the probes to the serverfarm.
    BTW, you can assign the problem to the entire serverfarm so you don't need to specify it for each rserver.
    3/ the problem with your redirect is that you applied to class-default.
    So even a request to ...../logon will be redirected to ...../logon.
    Therefore you just created a nice loop.
    You need to create a class-map to only match the url "/" so the redirect is only applied then.
    Gilles.

Maybe you are looking for

  • Report for MM for seeing the material old price and new price

    Hello friends, For the ROH material we are maintained the Moving average price. So that material is calculated the average price of that material, Know My clint wants old price of that  material i.e. one year before And he wants comparison report for

  • Web session and authentification session pb with wl6.0

    Hi, I am evaluating weblogic 6.0 on windows 2000. I have a little web application, with some URL (html, servlet...), I want to protect. So I defined a <security-constraint> element in my web.xml file, and I binded the logical roles with real particip

  • Connection refused with java, but not javaw

    I have a ServerSocket based program...listening on a port. It is really a very simple program. And I can run it with javaw. Then I can use another problem, for example, telnet to connect to that port, just to prove I can connect to that port. Everyth

  • How to transfer photos from the computer to the iPhone?

    How to transfer photos from the computer to the iPhone?

  • Resize partition broke wireless

    Title says all.  I was running out of room on my home partition for linux so I resized it taking a chunk of the unused space on my windows boot to add to my linux partition.  The operation went without a hitch.  The computer boots both OSes without a