Proxy to webservice error while posting
Dear Experts,
I have a asynchronous Proxy to Webservice scenario.
I am getting an error in receiver communication channel.
1> ......Message processing started
2> .......request entering
3>........call completed
4> .......error in response
5> ...... Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP:response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
My queries are
if this is Asynchronous scenarion, why I am getting a point 4? WSDL is of Sync type but I am using it as Async.
what can be done to remore this error descripted above.
Please help me to sort out his issue.
Regards,
Sumit Gupta
Though you are calling the service asynchronously, in case of errors the fault message would be reported back by the adapter. I do not think you can get rid of this error unless you find the cause of the error and clear it. The object reference not set to an instance of an object usually comes in dot net services for not properly initializing an object of a class.
VJ
Similar Messages
-
Error while posting a write up for asset belonging to affiliated company
Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
PragyaHi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya -
Error while posting depot excise invoice
Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tusharhello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni -
Tax code error while posting Planned delivery costs in Import Scenario
Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
DurgaIs you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan -
Error while posting the parked document in ECC 6.0
Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks. -
Error while posting parked documents
HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu -
Error while posting asset aquisition
Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanujaHi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS -
ErroR while posting J1IH (TR6)
Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS Dr 2000
SECS Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil KumarThe profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar -
Hi,
I am getting the below error while posting Vendor invoice FB60. Please help me...
Constant ! for Ledger ZWN00 does not contain any value*
Message no. GLT2301
Thanks
KishoreHi,
May be the company code assignment to specified special purpose ledger have the real time posting.
VVR -
Error while posting sec.HighEd cess (1%) in J1iin.
we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0,10' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
and.....
System failure during locking GLaccount 1001 by 21150105
Message no. 8I076
reply me. Text Removed
Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
Please dont add such commentsHey,
I have already replied to your thread for F5702 error.
G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
Regards,
Brinda -
Error while posting 561 Document
Dear All
Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
Even OBYC setting for that valuation class already assigned.
please advice.
Regards
Kumar.Hello Anandhakumar ,
please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
it could solve your query.
regards,
Ninad Kshirsagar -
Runtime error while posting a document (FB70/FBS1)
Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa. -
Error while posting usint tcode f-02 in fi
Hi all,
I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document but while saving it gives me the following error message:
Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
Message no:f1030
DIAGNOSIS:
The application has accessed a funds management or cash management module with parameters messing or defective.
PROCEDURE:
Notify your system administrator.
Hope some body would help me out.
ThanksHi,
Not sure if this works out
try checking img-Financial Accounting-Financial Accounting Global Settings-Company Code-Enter Global Parameters
double click on company code and see if any thing is assigned in the feild to FM.
regards
genie -
Error while Posting Document in FBV0
Hi Guys,
Iam getting following error while Posting Document in FBV0 which is already parked and it is with tax code.
Error: "No batch input data for screen SAPMF05A 0700"
Kindly suggest
Thanx and Regards
MunenderAlso have a look at the following notes:-
=> Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
=> Note 800177 - FB01: No batch input data for SAPMF05A 0700
thanks
G. Lakshmipathi -
FA Retirement- 21151: error while posting asset document: '100000039'
Hello Experts,
I have a client who encountered this error during fixed asset retirement - scrapping.
After selecting the asset to be retired, sap did not assign an account in the account column, but the user
was able to save the document. After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'. The document number the systems is referring to is the last document saved but sap did not assign an account code.
Please help. My client is using sap b1 8.81 patch5.
Regards,
LuzHi Too Mui Hwee,
What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
Thanks
Maybe you are looking for
-
Problem with posting free goods delivery
I need some help, when I'm posting the goods issue in VL02N I'm receiving following error: <i>Item Material Description Delivery qty UoM Batch
-
Hello, I am a new Ipad2 user and have a problem that I'm not sure what to do. When I try to open my homepage I created or the Safari icon, it opens fine, but they don't work. The page is shaded, does not scroll and is locked up. I can tap google and
-
WSIF Error while invoking database
i exposed a webservice from jdeveloper to call a function into database . this webservice has both input and output so , it is synchronous and i expect to have the result within 2 secs with large data , but sometimes , the result is returned after 10
-
Iphone not showing on pc or i tunes
I know this has been posted many times but i need help.It worked fine one day and then the next nothing shows up on my pc.I googled and tried everything there with no results,i went to the apple store and of course it shows on there pc but not mine.T
-
Hp photosmart premium c309g not printing correctly
this problem has slowly gotten worse. printer had been working fine since Oct 2010 (when a newly installed cartridge would not print) but recently stopped printing black. According to the ink cartridge estimated ink levels, I had PLENTY of black ink,