PSCS4 activation 'issue' w/MAC PPC 10.4.11

Has anyone experienced this problem...
Proceeded through the PSCS4 Mac upgrade procedure. On completion, was prompted to register the product, to which I responded it would be done later. I was expecting an activation procedure to follow, but the installation dialog simply ended. I would have needed to activate over the phone due to a recent switch of ISP, leaving the Mac 'internet-less'.
All PSCS, Bridge and Camera Raw functions are OK, but how to activate? The PSCS help menu shows a 'deactivate' but not option to activate. Adobe tech support has been of no help thus far. Has anyone experience this problem and if so, what is the solution to getting the product activated? Thanks!

This was an important feature I am told that will save everyone headaches also if the activation gets messed up they will repair it for you on Adobe's end so you will never eve know something went wrong.
For instance if your hard drive crashes and you have to replace it and then reinstall the suites it will repair the activation without you knowing.

Similar Messages

Adobe Photoshop Elements 10 activation issue on MAC running Parallels Desktop for Windows 7

I have a MacBook Pro laptop running both OSX and Windows 7 (using Parallels Desktop). I installed the MAC version of Adobe Photoshop Elements 10 when I booted in the MAC OSX mode. I also Installed Adobe Photoshop 10 in the Windows 7 mode (running as a virtual machine using Parallels Desktop). Both programs indicate that they are activated. If I boot the computer in the Windows 7 mode (not using Parallels Desktop) and start the Adobe Photoshop Elements 10 program it indicates that it is NOT activated and that I "already have two copies activated".
Question: Since I only actually have two copies activated how do I get the program activated for the Windows 7 boot operating mode?
Thanks in advance.
waterdoc
[email protected]

I have a MacBook Pro laptop running both OSX and Windows 7 (using Parallels Desktop). I installed the MAC version of Adobe Photoshop Elements 10 when I booted in the MAC OSX mode. I also Installed Adobe Photoshop 10 in the Windows 7 mode (running as a virtual machine using Parallels Desktop). Both programs indicate that they are activated. If I boot the computer in the Windows 7 mode (not using Parallels Desktop) and start the Adobe Photoshop Elements 10 program it indicates that it is NOT activated and that I "already have two copies activated".
Question: Since I only actually have two copies activated how do I get the program activated for the Windows 7 boot operating mode?
Thanks in advance.
waterdoc
[email protected]

 Ps installation on two different boot volumes of same machine?  Ps 11.0.2 Mac PPC  and then...

Hello, I'm new to this forum.
My goal here is to have two different Photoshop 11.0.2 installations on two different boot volumes of one and the same Power Mac (PPC) G5 Quad, one being a Tiger 10.4.11 system and the other one a Leopard 10.5.8 system, for the purpose of installing two different modalities of the same Epson Photo Stylus 2200 printer, one with the printer set to use the photo black ink cartridge for luster and glossy papers, and the other one using the matte blank ink.
This is because I prefer to simply change the startup disk when switching inks rather than having to delete and re-add the necessary printers. (This particular printer does not support ink cartridge switching under any version of Mac OS X.)
Photoshop is currently only used on this one machine. Obviously this intended scheme fits well within the EULA conditions.
My three questions are:
(a) whether there is any technical issue I have failed to consider,
(b) whether each copy of Photoshop on the same machine will have to be activated separately (in other words, is the activation tied to the CPU or to the boot volume drive?), and
(c) if the answer to the latter question is yes, whether this will count as one or two activations for purposes of later installing a single instance of the Photoshop 13.x ("CS6") upgrade on an Intel- MacBook, since obviously C6 will not run on my PPC Mac. Again in sum, will I be able to continue to run Photoshop 11.0.2 on two different volumes of the same PPC machine and the Photoshop 13.x upgrade on the laptop?
As further explanation, I would use Photoshop 13.x on the Mac-Intel laptop only in order to run ACR 7.x, but would keep my PPC G5 Quad as my photo editing and printing machine running Photoshop 11.0.2, since an upgrade of my desktop machine to a comparably powerful Mac Pro is simply not an option for both financial and technical reasons (the Classic environment is essential).
Any and all input and guidance will be appreciated.
Message was edited by: station_one

Thank you for the lightning-fast response—and on a Sunday morning too!
MichaelKazlow wrote:
…Is it technically a violation, that is something I'd leave Adobe to answer.
From my previous visits to other forums as a lurker, I was under the firm impression you were in fact an Adobe employee, Mr. Kazlow. I hope that is still the case and you are only referencing your participation in these user-to-user forums as a volunteer, not as an official representative of the corporation.
Much obliged.

Magic Jack connectivity to Mac PPC and Mac OS X 10.4

I recently read an Apple Discussion regarding Magic Jack (VOIP)
http://discussions.apple.com/thread.jspa?messageID=8101416
WHICH describe issues with Magic Jack and Mac PPC. In the Discussion it said that Apple was going to develop OS drivers(BD Aqua). Did that ever happen? I notice that Magic Jack still says that it is compatible with Mac and as I read on further it says " Intel only. Does Magic Jack work with a PPC, are there work arounds or are my efforts to get this product to work futile?

Darrell --
It says specifically, "Intel Only."
I would assume that's correct.
Have you read the reviews on this site?
http://tinyurl.com/2dodbym

Different Mac (PPC) OS X install failure

I seem to be having a different install failure for Flash
Player 9 on a Mac (PPC) OS X.
I tried all of the various solutions listed for other Player
9 failures with no luck (permissions, uninstalls, etc...)
When I run the installer it stalls out with 4 items left to
install while trying to search the hard drive. I even left it
running all night one night to see if it was just searching the
drive slowly. The installer isn't crashing as I can stop the
install by hitting the stop button.
One thing of note, is that I've had a few times (not all
times) when I cancel the install that the Flash Player will work in
the browser (I'm using Safari 3.0), however when the browser is
closed and reopened, Flash Player appears to not be installed. So,
I'm assuming in the act of canceling the install, there is some
form of a partial install that actually allows Flash Player to work
temporarily.
Anybody have ideas on this issue?
Mike
Flash Player 9 (both PPC installer & Universal Binary
Installer)
PowerBook G4 OS 10.4.10
Safari 3.03

Well after doing some additional playing, I discovered a fix.
I opened FireFox and installed Flash Player from within
Firefox instead of Safari.
Safari began to work immediately. Solution has held even
after restart.
Mike

Configure active and standby mac address in failover

Hi guys,
I just have a doubt that, if I configure the active and standby mac address in failover, does it will cause any downtime?
As I planning to configure the active and standby mac addresses in failover during production time and not wish that it will bring any downtime to me.
Besides that, just need some guideline that do I need to put all the interfaces' mac addresses in failover?
failover mac address GigabitEthernet0/0 0022.90fe.2000 0022.90fe.2001
failover mac address GigabitEthernet0/1 0022.90fe.3000 0022.90fe.3001
failover mac address GigabitEthernet0/2 0022.90fe.4000 0022.90fe.4001
failover mac address GigabitEthernet0/3 0022.90fe.5000 0022.90fe.5001

Hi Marius,
Seem like set the failover MAC address was not working for me.
Last friday I was tested the failover MAC address.
TEST 1
1, Power off primary ASA and secondary ASA work as active.
2, 2821 router able to learn the correct arp entries.
TEST 2
1, Power on primary ASA and failover from secondary to primary.
2, 2821 router able to learn the correct arp entries from ASA.
3, Set failover MAC address, power off primary ASA and secondary ASA be active.
4, 2821 router unable to learn the correct arp entries.
TEST 3
1, Removed failover MAC address from secondary ASA.
2, 2821 router still unable to learn the correct arp entries from ASA.
3, Power up primary ASA and secondary ASA still in active.
4, 2821 router still unable to learn the correct arp entries from ASA.
5, Reboot 2821 router and it able to learn the arp entries from ASA.
I am not sure this issue from router or from the ASA. But I guess I will try to upgrade the router in term of software and hardware.

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work. I did everything I was to install it correctly but it still does not install it correctly. Can some help me. Bob

Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
http://www.etresoft.com/etrecheck
It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut plays fine " HELP !!

I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut " plays fine, HELP !!

Yes it is the right Disc...
2Z691-6040-A (OEM) Drop-in DVD...
System Requirements  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor. User must already have 10.4 or above to install this 10.5 upgrade.
Compatibility  eMac (2005), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), iMac (20-inch Mid 2007), iMac (24-inch Mid 2007), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), Mac mini (Mid 2007), Mac Pro, Mac Pro (8-core), MacBook (13-inch), MacBook (13-inch Late 2006), MacBook (13-inch Mid 2007), MacBook (13-inch Late 2007), MacBook (13-inch Early 2008), MacBook Air, MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), MacBook Pro (15-inch Core 2 Duo), MacBook Pro (17-inch Core 2 Duo), MacBook Pro (15-inch 2.4/2.2GHz), MacBook Pro (17-inch 2.4GHz), MacBook Pro (Early 2008), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD), Xserve (Late 2006)
http://www.welovemacs.com/2z6916040a.html
I'd try to find another Mac to make a DMG of it & burn a copy to see if that works better.

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

How do I export vCards from Mac ppc to iPad 3?

How do I export vCards from Mac ppc (address book) to iPad 3 (contacts)?

You don't
Just sync Address Book with iPad.
Select the iPad in iTunes.
Click the Info tab and scroll down to Contacts.

Project Centre - Active Issues and Active Risk columns always show 0

Hello,
We have created a number of Project Centre views to which we have added the "Active Risks" and "Active Issues" columns against projects. No matter how many active issues or risks a project has, these columns are always showing 0 for each
and every project.
The reminders web-part on the PWA home page, and the Issues and Risks page (/PWA/IssuesAndRisks.aspx) correctly show these counts for a user, but Project Centre does not show the values correctly for projects.
We have not changed the values in the "Status" column of either list - they're still the default "(1) Active", "(2) Postponed" and "(3) Closed".
All issues and risks are correctly promoted to the reporting database on publish or when a list item is added/updated/deleted etc.
Our environment was upgraded from Project Server 2010 to Project Server 2013 and we're running service pack 1.
If not now, when?

Hello,
There fields don't actually work, if you want to see the active risks or active issues per projects in a summary row, create a report from the Reporting schema in the Project Web App database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

Hi Seattle
From Adobe site only!
flashplayer11_b1_install_mac_071311.dmg
Works fine.
Cheers Tomi

Why is cupsd 192.168.1.255 so active on my mac?

Why is cupsd 192.168.1.255 so active on my mac? Using Little Snitch network monitor I see it listed a few times per minute or so - from what I have read (Googled the IP after I first noticed it)... it's apparently connected to a print search of some sort - Is this a private IP address? and again, why could or should it be activating so often? Thanks everyone!
Message was edited by: estabroo

for now i can go in the 192.168.1.1 and my wireless is connected but!!!even though it connected i cant use it!!
and my local ip is not 192.168.1.1 instead it is 59.........\
can some 1 help??!
thx!

HT2848 hi my mac ppc g5 very slow after update mac os x 10.5.8

hi my mac ppc g5 very slow after update mac os x 10.5.8

See if you can hop over to the PowerMac forums.

PSCS4 activation 'issue' w/MAC PPC 10.4.11

Similar Messages

Maybe you are looking for