PSE 10 Editor- Intermittent problems

HP G42-415DX
OS: Windows 7 Home prem ed
Hard Disk space:
Partition c:
280 gb total
108 gb free
recovery d:
17.1 gb total
2.48 gb free
hp_tools f:
99.3 mb total
89.1 mb free
forgive me I am not very compure savey but I can get through something if someone walks me through it... so please bear with me.
After purchasing a Bamboo Creative bundled with PSE 8 I had to upgrade from 8 to 10 after being told that 8 isn't compatible with the OS i have now. Having done this I have had other problems besides the previous just not doing anything when opened, fixed that with the upgrade. Now I have been using the program for digital art and editing of photos. This is where the problems come in. After approx. 15 minutes of use, the program bogs down and I get alerts that the program is using a high amount of disk space... I continue working but the fan is working over time so I shut the program down and let Windows catch up.  Now, HP just did a HUGE Bios update and its been doing this ever since. The second problem I have encountered, is when using just about any tool within PSE 10 if I use it more than five (maybe less) seconds, the program goes unresponsive, but if I finish what i am doing and wait a few seconds, the program is running again. The third problem I have encountered is when I insert a photo (SD 1gb) card to import pictures, it never shows up. Even if I eject and reinsert after shutting down the program, then restarting the program once the photo card is in place...
That is where I am confused am i doing something wrong?.... Any thoughts?

Suggest that you consult with a reliable computer shop re advisability of installing more RAM.
I run PSEv.8 on my HP desktop with 6.0 GB without a hitch.
I would also investigate if one can roll back the BIOS to its prior state. You indicate that the genesis of your problem may relate, in a temporal sequence, to the update.
I don't permit all the updates that HP pumps out. I just delete the daily nag message." If it isn't broken, don't fix it.,"  The Microsoft security updates would seem to be ok.
Good luck.

Similar Messages

  • PSE Editor won't open in Windows 7

    I just tried to use PSE 7 on my new Dell XPS 9000 with Windows 7 and I receive a message that there is an error. The organizer opens fine. I did click on the icon on properties and tried to change to allow PSE to work but that did no good. So, please keep it simple (I'm simple) and tell me if I have an option to fix 7 to work or am I forced to upgrade to PSE 8? I did try to re-install to no avail. I did not try to re-install by turning off anti-virus as I have read/been suggested. I doubt that would fix the problem. I s everyone, even with PSE 8 having problems right now? If so, and the Forum members do suggest PSE 8, I think I would wait until all the bugs are worked out.

    Thanks John.... I did try to install with the antivirus disabled to no avail.
    I tried everything you suggested. When trying to open the editor and watching the files load, I get the error warning dialog box when the "twain" files are loading if that means anything. I am downloading the 8 trial version now. Going very slow for an i7 processor. About 1 hr into it with an hour to go! Maybe because this is a busy time of day for Adobe. I did call Adobe but they want to charge to get 7 working. I think that is very unfair considering I did not cause a problem and in my opinion Adobe should have updates to allow 7 to run with Windows 7. They must have a simple fix if they are willing to fix for a price. I have bought Adobe software for years now and I am disappointed at the way they treat their "regular" customers. Any more ideas?  Wonder why some can run PSE7 with no problems and others can't? I did tell you that this is a new Dell XPS 9000 that came with Windows 7 64 bit, didn't I ? Thanks again

  • PSE editor pictures do not look like the origianls

    The pictures on my PSE editor do not look like the orginals and most have a redish cast. I am having a hard time editing as I am not sure what the actual colors are that I am adjusting.
    It is near imposible to work on people, i.e. complexion colors, etc.
    Is there a setting I am missing in the basic editor?
    Any help will be appreciated.

    Hello Donburl,
      The red color cast you are seeing is created by your color management settings, as suggested by Bshowell. However, the settings in Photoshop Elements under Edit>Color Settings are only part of the story. There are also system level color management settings, the main one we would be concerned with would be the monitor profile. This profile is a description of the color output of your device and is used to compensate for a known difference between the input and the output. However, you are not seeing a similar red cast in other applications because they are not color managed (meaning, they ignore the color management settings of your system). Most likely the problem is you are using the incorrect color profile for your monitor and it is shifting your colors.
      A monitor profile is not necessary unless you a very concerned with absolute accuracy in your prints because it is the only way you can ensure the colors on your screen are accurate. But that requires a hardware calibration device.
      You should probably just change or remove your current monitor profile. How to do so depends on your OS:
    Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/icm_change_ color_profile_monitor.mspx?mfr=true
    Win Vista/7: http://windows.microsoft.com/en-US/windows7/Change-color-management-settings
    Mac: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2141.html

  • Help intermittent problem with logging in

    Help i have intermittent problem with logging in, sometimes it just comes up with the desktop without any icons or dock and i have to restart the server so i can log on properly, but it doesn't happen all the time, any ideas would be appreciated???

    The clients login window just shakes and won't login. I did find one thing that helps some of my Mac Lab woes.
    Some students get a dock that only has 3 icons. These students also will have saving and printing problems when they get this default dock.
    I think some of the problems occur when the student gets over quota, some preference files get corrupted.
    1. Student will login.
    2. Open the student's home folder. Then open Library and Preferences.
    3. Find the file com.apple.homesync.plist and delete it.
    4. Empty Safari Cache and the user's Trash Can and make sure they are not over quota.
    5. Logout and login.
    This will fix some problems, but not the problem when students can't login at all.

  • I recently upgraded to Firefox 13.0.1 and I'm operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard). Now I'm having intermittent problems with sending

    I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
    Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
    Anyone having these problems?
    Any suggestions?

    I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
    Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
    Anyone having these problems?
    Any suggestions?

  • I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

    I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
    I’m using a PreSonus Firebox audio interface.
    It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard.  I tried different midi controllers, different keyboards, different midi cords, and check midi preferences.  The audio interface is working fine and is recogonized, but the midi doesn’twork.  I re-started the computer several times and then finally it miraculously starts working again.
      I’ve been having to this every day now.  Any help or ideas is very much appreciated.

    I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

  • Bridge won't launch from CS3 - intermittent problem

    Hi folks<br />I dont think I am alone in experiencing this problem as a quick google threw up other sufferers but the suggested fix  update everything at the Adobe website  has not fixed the problem, so I am hoping that someone here can shed some light.<br /><br />Problem 1; Bridge will sometimes not open from CS3 - ie when I click on the icon , or if Bridge is set up to open automatically when CS3 opens, I sometimes get an error message that reads <br /><br />error 2:Photoshop is undefined. Line: 1  ->photoshop10.invoke bridge (false, false, );<br /><br />When this happens Bridge will still open fine from the start menu, so it is not disastrous but is annoying because the keyboard shortcut <shift ctrl W   > won't work either (to close a file in CS3 and bring the Bridge window up on screen) - a similar error message is received when using Shift Ctrl W as when trying to open bridge.<br /><br />Problem 2; the fly out menus will not remain on screen.  Eg if I have a layer and want to access the blend mode menu - if I click on the menu in the layer palette the menu appears for a second and then disappears.<br /><br />Problem 3: If I try to create a new action as soon as I click on the "new action" in the actions palette the word "scripts" appears multiple times in the action - it just produces line after line of this until I click the button to stop the action.<br /><br />Problem 4 (may be related to problem 2 ?); in the crop tool - I can't get the cursor to remain in the width and height boxes - so I can't control the dimensions of the crop (which is currently stuck at my last size of 3 x 4 cm - not much use to man nor beast).<br /><br />Most frustratingly of all  - these are all intermittent problems.<br /><br />Things I have tried - updating CS3 and bridge from Adobe site, opening CS3 and bridge before any other program, not running any other program at the same time, uninstalling and reinstalling (after disabling all antivirus etc stuff), but so far nothing works.<br /><br />I am using a 1 year old Dell PC, lots of RAM and hard drive available, only working from internal drives, no new  hardware or software loaded (although there might have been a windows update - but this occurred after the problems started and has not noticeably changed things).  Windows XP pro. Recently done whole system scan for viruses etc and no problems found.<br /><br />Please help, this has been going on since I loaded CS3 a few months ago and it is driving me nuts.<br /><br />Thanks<br />Amanda D'Arcy

    Amanda - One consistent recommendation that has fixed a lot of problems, especially if program worked before, and does not now, is to reset preferences. This is not the same as uninstalling and reinstalling, as the preference file is not affected with that operation.
    Since it is intermittent problem this will probably not help, but worth a shot.
    When it does not work is there some process that is running, like a anti-virus scan, or?
    What about startup scripts in Bridge? Disable any you do not need.

  • Has anyone an Intermittent Problem sending mail from Mac OS X (10.6.8)?

    I have a Mac mini operating on Mac OS X(10.6.8) Snow Leopard. In the last couple of weeks I have been having intermittent problems sending mail from Mac MAIL, especially if I hit the reply button.  It whirls around for ever and then tells me to 'Try Later' or 'Try Again'.  When I shut down my computer and open up mail again, I hear the mail whizzing off.  I have just tried it now and it went in the time that it has taken me to compose this email. But sometimes the mail doesn't go at all. Could it me because I have too many messages in my inbox and sent boxes (around 1000 in each)?  I read somewhere that you should delete Mail in library/pref/com.apple.mail.plst and reinstal it.  But I'm frightened to do this in case I can't re-instal it as I don't know how to.

    I have a Mac mini operating on Mac OS X(10.6.8) Snow Leopard. In the last couple of weeks I have been having intermittent problems sending mail from Mac MAIL, especially if I hit the reply button.  It whirls around for ever and then tells me to 'Try Later' or 'Try Again'.  When I shut down my computer and open up mail again, I hear the mail whizzing off.  I have just tried it now and it went in the time that it has taken me to compose this email. But sometimes the mail doesn't go at all. Could it me because I have too many messages in my inbox and sent boxes (around 1000 in each)?  I read somewhere that you should delete Mail in library/pref/com.apple.mail.plst and reinstal it.  But I'm frightened to do this in case I can't re-instal it as I don't know how to.

  • My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    I just figured out the print quality issue for my wife with her new iMac and new printer.
    She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
    Turns out the newer printer had the option to connect via wifi which we used during setup.
    The driver options are completely different depending on how you connect.
    Once I connected via USB the correct options were available and the print quality was better.
    Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
    If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
    One user had to delete the old printer driver before Software Update loaded the newer printer driver.
    https://discussions.apple.com/message/15947486#15947486
    On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
    I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

  • Documents now opening in pse editor photoshop instead of a PDF in Adobe reader?

    why is all of my documents now opening in pse editor photoshop instead of a PDF in Adobe reader?

    It is a file association issue. How to fix it depends upon your OS.

  • TS3899 Why Do I have a problem Getting my email on multiple Apple devices iPad notifies me that Email is in use by another device Which is my iPhone This is an intermittent problem

    Why am I having a problem Receiving email on multiple Apple devices My brand-new iPad informs me that my email is used by another device which is my iPhone 4S This is an intermittent problem and does not always happen

    Hello Cyko69
    If you are seeing a Mailbox Locked alert, the following article will explain what is going on. Typically with certain type of emails, it is meant to be accessed one at a time. The article will give some suggestions on how to resolve the issue.
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I've an intermittent problem with microphone on iphone4

    i have an intermittent problem with my microphone on my iphone4

    what kind of problem do you have with the microphone?
    You may want to take a look at http://support.apple.com/kb/ts2802 since its the iphone hardware troubleshooting page.
    It could just be a hardware problem. You may need to get it in to an apple store.

  • Intermittent problem with Personal Hotspot

    Hello All
    I think either my iPad 2 or my iPhone 4 is mental.  Can anyone convince me otherwise?
    For some months now I have been experiencing an intermittent problem with tethering my iPad 2 to my iPhone 4 Personal Hotspot. 
    Sometimes it works without a hitch (although I have to turn the Personal Hotspot on the phone off and on again to get iPad to 'see' it) and at others, like now, it shows me the message 'Unable to join the network 'iPhone'.  It throws the message up so quickly that even though it 'sees' the phone in the list of networks, it behaves as though it can't actually be bothered to even try to connect.
    I have tried reboots and restarts, 'forgetting' the network, changing passwords, sacrificing a chicken... all the usual stuff.  But still when it gets in this kind of mood it stubbornly refuses to do anything.  I have even taken it to the Apple store where, not surprisingly it worked first time and the assistant looked at me as though I was an idiot.  It then proceeded not to work for a couple of days again as if punishing me.  There is no problem with the general Wi-Fi connection as I have another phone (an Android) that I run as a Hotspot too.  It has never once had a problem connecting to this or any other Wi-Fi connection..    
    Confusingly, and rather irritatingly, after a few days of this not-connecting lark it will have a few days of not having a problem connecting at all.  I won't have changed any settings on either iPad or iPhone and so I have no way of figuring out why this is happening.  This has been the same situation with all versions of iOS I have installed ever since buying the phone in April 2012, and the iPad in June 2012.
    Please, is there anyone out in the ether that can suggest a solution to this?  Or is one of my Apple products simply mad?  I have given both devices a strong talking-to, but this hasn't sorted the problem either.  Next, I think I might have to try sacrificing a goat.

    I have the same issues with my iPhone 5 (6.1.4).  I do not have an answer for you, and perhaps my "workaround" will lead someone with more knowledge about these things to offer us more information.
    When I turn on the Personal Hotspot and it does not show up as visible on my iPad or MacBook, or offers that ambiguous message about being unavle to join the network, I perform a few steps that almost always resolves it.  I have to go through these steps twice sometimes.  The order of operations seems to affect the outcome (at least it appears to me that it does)
    Turn off WiFi on the client device (iPad, MacBook, Windows laptop, KindleFire, etc)
    Turn off Personal Hotspot on iPhone
    Turn off Bluetooth on iPhone
    Turn off WiFi on iPhone
    Then turn on Personal Hotspot and allow it to automatically start WiFi and Bluetooth.
    Turn on the client WiFi services.
    Connection successful!
    As I said, I sometimes need to perform the steps ablve twice, but it eventually works.  It is incredibly frustrating to go through these hoops to make the device perform.  I do not know precisely when the problem began to occur, but I don't think it did not occur on my iPhone 4s with IOS5.
    Any help from the Apple guys would be appreciated.  I think it is a software issue, because the shutdown of services and restart seems to resolve the issue.  I guess I might take a trip to the Aple Store to have them look at this behavior.

  • Can I download photos from my camera directly into PSE Editor?

    I am using Mac OSX Lion v 10-7.  If I install the PSE Editor from the Apple App store, will I be able to download my photos directly from camera into PSE Editor? I would like to process my photos with PSE as
    I have done for many years with Windows, then, after fine-tuning them, place them in a location of my choice.   I guess what I need to know is:  Is the PSE Editor sold by Apple App Store a stand-alone app, or
    is it tied-in some way with iPhoto wherein the user must go thru iPhoto to PSE,  then back to iPhoto for display in an album.  A last question: does anbody know for sure that Adobe has worked out all the "kinks"
    of PSE 10 in re to OS X Lion.  Thanks all, from a beginning iMac user.

    You don’t get the Organizer with the app store version; so you would be best to buy the boxed product or download the 30 day free trial from Adobe which is the full product.
    Otherwise if you are prepared to operate differently to how you did in Windows, you can use the iPhoto Library with the Elements Editor set up as your external editor or simply use the app on a stand alone basis, opening images in the editor directly from folders.
    FAQ
    http://helpx.adobe.com/photoshop-elements/kb/purchases-mac-app-store-faq.html
    Using iPhoto with Elements
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html

  • HT204291 Airplay intermittent problem, why does not airplay work well anylonger?

    Airplay intermittent problem, why does not airplay work well anylonger. Suddenly it drops out. Now this function has gone from great to ****.
    Trying to view streamed content from the ipad to the Apple TV? Nah forget about it. Sooo dissapointing.

    Restart your wifi router

Maybe you are looking for

  • Can i have 2 apple ids in one credit card?

    I have 2 iphones and 2 apple ids and i'd like to know how to handle both with just one credit card

  • Send backend PO as pdf attachment in an eMail to creator of SC

    Hello, I'm working on an SRM 5.5 Add-On on ERP6.0 system (one-client SRM system). Now i want to send the PO which is created in the backend vie eMail as PDF attachment to the creator/initiator of a SC. I already pass the SC number in field EKPO-BEDNR

  • PI 7.0 SPS14 - design access problem

    Hi! we are trying to make a change to our XI 7.0 SPS14 system in the design but the change button in message mapping (also other objects in Design) is greyed out. We do have the proper role SAP_XI_CONFIGURATOR_J2EE and SAP_XI_DEVELOPER_J2EE. Did anyo

  • What is Skype trying to hide?

    I've had a problem with incoming calls for some time; some ring through, others don't. I only find out about the missed calls when I get emails telling me I have voicemail, though the actual voicemail doesn't usually appear in Skype until much later

  • My z10 led flashing red when charging and even at battery full it blinks red. no green at any note..

    My z10 led flashing red when charging and even at battery full it blinks red. no green at any notification. But at below 10% charging level it blinks with a combination of red and green. Please send me any settings to be changed if.. at full charged