Published iPhoto Journals Are "Being Updated"?

Most of my iPhoto journal now show on their web page with no thumbnail, and when I try to click them, Apple throws me "This journal is being updated. Please try again later." Is there any way anyone knows to fix this?
I'm now on iOS8 on my iPad so iPhoto's gone now.

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Similar Messages

How to view videos in iCloud published iPhoto Journal using web browser?

If I publish an iPhoto Journal containing videos to iCloud and then attempt to view the journal from a web browser e.g. Safari, I see a single image corresponding to each video, but when I select one of them, I get a backwards, play/pause and forwards buttons, but those only control treating the images as a slideshow. I don't see any buttons that correspond to playing the contents of each video. Do I have the incorrect format for the videos (they are .mp4 files created using Handbrake from the original .MOV files which is what my camera creates)?
Here's the URL of the published iPhoto Journal.
https://www.icloud.com/journal/#3;CAEQARoQ8C9bYMtZRt9Fb0aFEnLakA;2335CFCE-383F-4 EB5-B99C-26054C3A4E97
Thanks in advance for any advice.
David

To add, when I do try to Play videos in IPhoto'08, QuicktimePlayer7 opens full screen but will not play content .

System settings are being updated??

I bought an eMac from a friend of my husband's, and there wasn't the Safari icon to connect to the internet. So, I clicked on the apple icon at the top left of the screen, then clicked on Mac OS X, and it would usually open up the internet browser and I could surf the web from there. Well, my husband was messing around with the computer to try and figure things out, and now when I click on that same thing a gray box pops up in the middle of the screen and says that my system settings are being updated and it's unable to open my preferred web browser and I need to try again in a few minutes. This started last night, so it's been well over 24 hours, as we let it set there thinking it just wasn't finished updating. How do I get rid of that?

Hello Mrs. Long,
Did you get the 10.4 Install Discs with it? If so power down, hold mouse button down at power on to open the tray & inset Install Disc, hold Option/alt key at same time to bring up the Startup manager so you can choose the Install Disk to boot from.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

How to get which tables are being updated by running any transaction code

Hi experts,
please tell me how to find which system table are being updated after running any transaction code .
please tell me the procedure to find that.
Thanks & Regards,
Yogesh

Hi yogesh patil,
for the dbtable..
goto technical settings and activate the log...
it will tells u..
transaction...Table history (SCU3)
Log data changes
The logging flag defines whether changes to the data records of a table
should be logged. If logging is activated, every change (with UPDATE,
DELETE) to an existing data record by a user or an application program
is recorded in a log table in the database.
Note: Activating logging slows down accesses that change the table.
First of all, a record must be written in the log table for each change.
Secondly, many users access this log table in parallel. This could cause
lock situations even though the users are working with different
application tables.
Dependencies
Logging only takes place if parameter rec/client in the system profile
is set correctly. Setting the flag on its own does not cause the table
changes to be logged.
The existing logs can be displayed with Transaction Table history (SCU3)
Reward points if helpful

HT201342 how can I tell if my contacts are being updated and stored in my cloud?

how can I tell if my contacts are being updated and stored in my cloud?

Log into icloud.com with a computer's browser and look at the contacts page. This lists the contacts currently stored on the icloud servers.

HT6114 I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously.

I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously

The next time the crash happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

I can no longer publish iPhoto Journals to iCloud

I have succesfully published and shared many iPhoto Journals to iCloud over the last few months. This was my main reason for purchasing the App.
It no longer works, I just get a spinning wheel and the perpetual indication that the journal is uploading. I have checked my iCloud storage space and have over 4GB of space so that's not the problem. I keep the iPad and Apps up to date. I have also tried deleting iPhoto from the iPad and starting over.
Any ideas or is this a known bug that requires an Apple update in the future?
Thanks!

I have since received AppleCare's advice:
Backup then restore iPad as new.
This worked, albeit a rather frustrating and unelegant solution.

SAP File System are being updated at Storage Level and as well as in Trash

Hi Friends,
We are facing a strange but serious issue with our linux system. We have multiple instance installed on it but one of the instance's file system are being visible in Trash.
The exact issue is this.
1. We have db2 installed on Linux now one of our instance's Mount Points are being available in LInux Trash if i create a file at storage level i.e /db2/SID/log_dir/touch test it will be dynamically updated in the trash and will be create in Trash also.
2 this can not be a normal behavior of any O.S.
3 if i delete any file from trash related to this particular SID (instance) file will be deleted from the actual location.
i know this is not related to SAP Configuration but i just want to find out root cause analysis. if any Linux expert can help in this issue waiting for an early reply.
Regards,

Hi Nelis,
I think you have misinterpreted this issue. let me explain you in detail. we have following mount points in storage including SAP installed on it.
/db2/BID
/db2/BID/log_dir
/db2/BID/log_dir2
/db2/BID/log_archive
/db2/BID/db2dump
/db2/BID/saptemp1
/db2/BID/sapdata1
/db2/BID/sapdata2
/db2/BID/sapdata3
/db2/BID/sapdata4
Now i can see the same mount points in the Trash of linux and if i create a folder ./ file in any of the above mentioned mount point it will be dynamically updated in Trash and if i delete some thing at storage / os level the same will be deleted from trash and vis versa.
I have checked everything no softlink exists anywhere but i am not sure about storage / os level thats what i want to find out?
Regards,

I have 3 Apple TV all so conection with my network none are being updated

I have 3 Apple Tv"s after the latested upgrade none are being updeted with new Pix's

Hello marie196,
Thanks for the question, and welcome to Apple Support Communities.
You do not necessarily need to restore the device to factory settings, but rather sign out of the four services that utilize your Apple ID: iCloud, iMessage, FaceTime, and iTunes & App Stores. Once signed out, you can sign in with a new Apple ID. For more information, see the following article:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Additional Information: You may encounter an error regarding a 90-day limit. For information on this, see the following article:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/HT4627
Thanks,
Matt M.

How can I verify that the Trace and Points tables are being updated?

I am using MSQuery to look at the data in my Citadel database, but it appears there is no data in the database. There are transactions in the A/E viewer. I am totally new to lookout and citidel. TIA.

Hi Jeff,
Here are some old articles on accessing Citadel 4 data from MSQuery and MSAccess. These should at least give you a starting point:
http://zone.ni.com/devzone/conceptd.nsf/webmain/85CECF0AEEC5B1B28625680800733CC6
http://zone.ni.com/devzone/conceptd.nsf/webmain/0A3D4EEAC9208065862568080072DB9F
Also, do you have NI-MAX? You can check for data in there too.
Hope this helps,
Khalid

How do I verify that the Citadel data tables Trace and Points are being updated?

I am using MSQuery to look at the data in my Citadel database, but it appears there is no data in the database. There are transactions in the A/E viewer. I am totally new to lookout and citidel. TIA.

Hi Jeff,
Here are some old articles on accessing Citadel 4 data from MSQuery and MSAccess. These should at least give you a starting point:
http://zone.ni.com/devzone/conceptd.nsf/webmain/85CECF0AEEC5B1B28625680800733CC6
http://zone.ni.com/devzone/conceptd.nsf/webmain/0A3D4EEAC9208065862568080072DB9F
Also, do you have NI-MAX? You can check for data in there too.
Hope this helps,
Khalid

My iPhoto Events are not updating in AppleTV.

I can see most recent photos, but the Events stop in June. I migrated from my original MacMini in June to a new iMac and that seems to be the same timeline as the latest event showing in Apple TV. Tried realigning both AppleTV (with reset) and toggling the iPhoto/iTunes settings. Any suggestions?

Thanks, it was set on manual instead of by date (?). Wonder why iphoto help doesn't note that..... Thanks so much for your help.

Problems Accessing iPhoto Journals through Facebook iOS apps

Anyone else having troubles accessing published iPhoto Journals through iOS Facebook apps (on both iPad and iPhone)? Clicking a link to a Journal while within the Facebook app redirects you to Apple's iPhoto information page instead of the published journal. If you open up mobile Safari and click on the same link from the Facebook mobile page, it will bring up the Journal just fine. Not sure if this is an Apple/iCloud issue or a Facebook app issue.

I see the same thing. Since the link works in Safari mobile, Safari on Mac OS X and Firefox it would seem to be a Facebook app problem. Since the journals are pretty new, Facebook probably needs to update their app so it handles the URL correctly.
-Doug

JavaScript error in IE8 with shared iPhoto Journals

I like iPhoto for iOS a lot: soo easy to build and design photo journals.
BUT: when I publish iPhoto Journals in iCloud and share the link to with others, they tell me they cannot see anything else than the headline and the background pattern... no pictures.
In Safari on iOS devices I have no issues to see the Journal. Same for Windows PCs with Google Chrome browser.
But when I use Internet Explorer 8 browser, the Journal stops loading after the background image is shown.
And the small javascript error indicator tells that IE8 stopped loading/rendering due to JavaScript issues within the JS-code of the page.
As I have no influence on JavaScript of the shared Journals, I would urgently like Apple to test and fix the issue.
Also in iOS Safari with enabled Debug Console the JavaScript errors are specified...
Thank you
Dirk

You are talking to other users here and not Apple. If you haven't already done so I would report this problem directly to Apple using the iPhoto for iOS feedback page here:
http://www.apple.com/feedback/iphoto_ios.html

VBA to identify a group of tasks being updated

Good Afternoon,
I have not had much luck with Project questions here, but now that I have dug a little deeper I think I can ask a question that you may be able to help with. If any of you know of a better place to find Project VBA advice, please let me know!
This question is also gathering dust over at UA. http://www.utteraccess.com/forum/Custom-Macros-Project-20-t2022616.html
First off, I am writing a macro that is triggered when a task is updated in project. I used the code from this page as a starting point.
http://msdn.microsoft.com/en-us/library/ee...fice.12%29.aspx
The macro I wrote works well. I changed the code up a bit so that it runs each time the user sets a task to 100% complete. When the user sets a task to 100% complete, the macro pulls today's date and adds it to the custom date field (Date2).
My next challenge is to warn the user if they update start or finish dates for a task with a specific tag in a text field (Text15). This new functionality will be embedded with the previous functionality I already wrote. Here is the problem. When I need to
update a bunch of tasks, or when I update one task that changes other tasks due to links, the event is triggered for each and every task. This creates lots of message boxes that I don't need.
On the surface this makes sense because I want to know each time a task changes, but from a practicality standpoint I only need to be notified once for each group of tasks that are updated. For example, if I update one date, and linking causes 10 other dates
to change, I only want to be notified once. Similarly, if I highlight and change multiple dates I only want to get warned about it once, not once for each task.
To achieve this I think I need to access some kind of collection that represents the set of tasks that are being updated as a result of user input. This is where I need help. I am not sure how to access this information.
For your information here are the code elements I have written for the existing macro.
This section goes in "ThisProject":
<code>
Private Sub Project_Open(ByVal pj As Project)
   EnableEvents
End Sub
</code>
This section goes in a module named "modTaskUpdate":
<code>
Public TskUpdate As New clsTaskUpdate
Sub EnableEvents()
   Set TskUpdate.App = MSProject.Application
End Sub
</code>
Finally, this section goes in a Class Module named "clsTaskUpdate":
<code>
Public WithEvents App As MSProject.Application
Private Sub App_ProjectBeforeTaskChange(ByVal tsk As Task, ByVal Field As Long, ByVal NewVal As Variant, Cancel As Boolean)
'Code for managing 100% complete and Date Completed
'(This part works OK, see the next section for the code I need to modify)
    If ((Field = pjTaskPercentComplete) And (NewVal = 100)) Then
        'Add today's date to completed date field
        'MsgBox "Adding today's date: " & Date & " to the Date2(DateCompleted) field."
        tsk.Date2 = Date
    End If
    If ((Field = pjTaskPercentComplete) And (NewVal = 0)) Then
        'Remove date from completed date field
        'MsgBox "Removing date from the Date2(DateCompleted) field."
        tsk.Date2 = ""
    End If
'Code for managing warnings to user if PST dates will change.
' Currently this message is triggered for each task that causes a change.
' Can we only trigger this task once for each group of changed dates?
    If ((Field = pjTaskStart) Or (Field = pjTaskFinish)) Then
        If (insrt(tsk.Text15, "PST") <> 0) Then
            MsgBox "Warning! You have changed a date that is linked to a line in the PST. As a result the PST has been automatically updated."
        End If
    End If
End Sub
</code>
FYI: The PST is an external Excel file that has its values automatically update via linked cells in Project.
Thank you for your time and consideration.
Please let me know if you have any questions.
Nate

Nate,
Yes, as far as I know, there is no "collection" of task changes. Remember, a collection is a group of objects and a change isn't an object.
I see you found one of the posts I responded to regarding paste links. If you have ABSOLUTE file discipline management, then you might be okay with paste links, but since there is a much better alternative (i.e. VBA) to do what you need I'd avoid the paste
link idea. As Clint Eastwood said in his Dirty Harry movie, "Do you feel lucky?"
There have been various posts with code to export Project data to Excel. Unfortunately I find the search capabilities of these forums to be sorely lacking so rather than a link, here is some sample code you can adapt.
Option Explicit
Sub CalendarExceptions()
'Basic macro code created by Kiran.K and posted on MSDN Project
' customizing and programming forum Feb 7,2013
'Code streamlined and updated by John - Project June 2,2014
Dim MyXL As Object
Set MyXL = CreateObject("Excel.Application")
Dim i As Integer, j As Integer
Dim E As Exception
Dim r As Resource
Dim xlRng As Range
'open Excel, define workbook, and set column headers
MyXL.Workbooks.Add
MyXL.Visible = True
MyXL.ActiveWorkbook.Worksheets.Add.Name = "Exception Report"
MyXL.ActiveWorkbook.Worksheets("Exception Report").Activate
Set xlRng = MyXL.ActiveSheet.Range("A1")
xlRng.Range("A1") = "Proj Cal Holidays"
xlRng.Range("B1") = "Start Date"
xlRng.Range("C1") = "Finish Date"
xlRng.Range("E1") = "Res Name"
xlRng.Range("F1") = "Res Base Cal"
xlRng.Range("G1") = "Base Cal Excep"
xlRng.Range("H1") = "Start Date"
xlRng.Range("I1") = "Finish Date"
xlRng.Range("K1") = "Resource Name"
xlRng.Range("L1") = "Res Excep"
xlRng.Range("M1") = "Start Date"
xlRng.Range("N1") = "Finish Date"
'First gather and export Project calendar exceptions
i = 2
If ActiveProject.Calendar.Exceptions.Count > 0 Then
    For Each E In ActiveProject.Calendar.Exceptions
        xlRng.Range("A" & i) = E.Name
        xlRng.Range("B" & i) = E.Start
        xlRng.Range("C" & i) = E.Finish
        i = i + 1
    Next
End If
'Next, gather and export resource base calendar exceptions along with
'   resource calendar exceptions
i = 2
For Each r In ActiveProject.Resources
    If Not r Is Nothing Then
        j = i
        If r.Type = pjResourceTypeWork Then
                For Each E In r.Calendar.BaseCalendar.Exceptions
                    xlRng.Range("E" & i) = r.Name
                    xlRng.Range("F" & i) = r.Calendar.BaseCalendar.Name
                    xlRng.Range("G" & i) = E.Name
                    xlRng.Range("H" & i) = E.Start
                    xlRng.Range("I" & i) = E.Finish
                    i = i + 1
                Next E
                For Each E In r.Calendar.Exceptions
                    xlRng.Range("K" & j) = r.Name
                    xlRng.Range("L" & j) = E.Name
                    xlRng.Range("M" & j) = E.Start
                    xlRng.Range("N" & j) = E.Finish
                    j = j + 1
                Next E
        End If
    End If
Next r
MyXL.ActiveWorkbook.Worksheets("Exception Report").Columns("A:N").AutoFit
End Sub
John

Published iPhoto Journals Are "Being Updated"?

Similar Messages

Maybe you are looking for