Publishing in Adobe Presenter

I have created a training simulation (practice exercise for
the learners to perform certain steps in an application) in adobe
captivate, published it, and inserted the swf in a Powerpoint
presentation. However, when i publish the PPT file using Adobe
Presenter, it takes the simulation as a self-running demonstartion.
When I do not checkmark "Control Using Presenter Playbar", it
takes it as a practice exercise. However, in this case, it takes
the default screen time for screens without audio (for example, 30
seconds) and does not let me complete the practice exercise. Please
help!

Is embedding a Captivate project in Presenter something that
is
specifically supported?
It sounds like the issue is a classic case of layering - the
CP file
expects _root to be its top timeline, but when inserted into
another
SWF, _root is now THAT SWF's top timeline...
Unless embedding a published CP file in Presenter is
something that is
specifically supported, I don't think there's a workaround
for this (not
one I'm aware of). Essentially, you'd have to get CPs calls
to stop at
its expected _root, not the parent (Presenter's) _root. Not
sure how
that's done.
Erik
rashmi23 wrote:
> in adobe captivate, published it, and
> inserted the swf in a Powerpoint presentation. However,
when i publish the PPT
> file using Adobe Presenter, it takes the simulation as a
self-running
> demonstartion.
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

Similar Messages

Quiz publishing in Adobe Presenter

Hi there,
I am new to Adobe presenter, so still finding my way around.
is there a way, when publishing quizzes to remove the sidebar? I don't want them to have the ability to search or look at the notes.
Thanks.

I have found the answer to this.
It is in theme and there is a tick box to enable side bar.

Publish without Adobe Presenter logo?

Is there a way to eliminate or change the "Adobe Presenter" name that comes up when starting a published presentation? I'd like to substitute it with other messages.

Discussed here: Replacing splash text Adobe Presenter - v9
This reference is old, but still applies: Adobe Presenter 7 * Change the SWF loading text for all presentations

Adobe Presenter 8 Not Publishing

Hi,
I have a course originally developed with PPT 2003, then upgraded to PPT 2007 and developed in Presenter 7. When I go to publish in Adobe Presenter 8 (.ppt in compatability mode) when I publish, I just get the gray screen with the Adobe spinning green icon. All of my course have worked prior to upgrading to Presenter 8. I am not receiving any error messages. I've tried saving as .pptx and that does not resolve.
Thank you.

Hi
Can you please mail your presentation to [email protected] so that I can look into your issue?
Thanks
Mahesh Nayak

Audio Problems in Adobe Presenter: Help Needed Urgently!!

I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
Can anyone help me on this?
1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
2. Is it the problem of Trial Account or something like that?
Please let me know the solution. Need to work on this ASAP!!!
Thanks in Advance,
Yogini

This is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer?

Adobe Presenter panel shows garbage Arabic strings

Hi,
We are working on a localizing some PPTX files into Arabic and publishing them using Adobe Presenter (SCORM output).
After publishing in Adobe Presenter, we tried to view the course using Internet Explorer, we found that some strings on the course's right panel appear as junk characters.
Viewing the same course using another browser (Google Chrome), completely shows all strings.
Is there any fix that can be done to ensure all Arabic strings are properly shown?
http://
Thank you,
Jenn

Hi Vikram,
Thank you for your suggestion.
The machine we've used has Arabic language pack installed in it.
The machine was booted to Arabic locale too prior to publishing the course.
However, these did not solved the issue at all.
What we found as resolution is to manually fix on the xml file and declare the language for the course.
One thing that we are now trying to resolve is the Notes section of the published course where the content are not flipped (right-to-left) correctly.
Is Arabic (including Hebrew) going to be fully supported for Adobe Presenter?

Migrate Articulate Presenter 13 Content to Adobe Presenter 10

We need to migrate our current library of ~150 modules (approx. 10 mins each) authored in Articulate Presenter 13 over to Adobe Presenter 10 and I'm not sure the best way to go about synching the animations and narrations. The animations are all "OnClick" in PPT, and are synchronized in Articulate Presenter with the Sync Audio feature, but the audio files are not available as I believe they are within the proprietary .ppta file.
Here's what I've tried...
Publish Articulate Presenter 13 for web
Rename published mp3 files to correspond with slide numbers
Open the PPTX file in Adobe Presenter
Import renamed mp3 files that correspond with the slide numbers
Re-sync animations in Adobe Presenter
This is obviously quite tedious and time intensive, and I need to see about other means of synching animations.
Questions
Is there another way to synch the animations?I could take the On Click in the Animations pane in PPT and change them to After PreviousNeed to know the timing in secondsNot easily discerned in the audio editor in Articulate Presenter
What happens to the audio after I've imported an MP3, which is already compressed and then publish in Adobe Presenter?Is it further compressed or does it maintain the same audio quality as when I brought it in?
Thanks in advance!

Is there another way to synch the animations? No. You will need to resynch the audio through either the Sync Audio tool or the Edit Audio tool.
Could you set the animations to After Previous? Yes. I believe you can set a delay timing in PPT and have Presenter take it (not gospel truth, but I recall that working some time and a few versions ago). however you will have to know how long the audio needs to run before cuing the next animation. I would think that just doing the animations on click and synching them through the normal means would be easier and faster. My 2c.
What happens to the audio when published? If the audio is at a higher quality than the selected publish quality for the audio, then it will be reencoded to the more compressed audio settings. If it is at or below the publishing settings for the audio, it just creates copies of the audio files.
Hope that helps.

Adobe Presenter Always Passes Complete Status to LMS - Even When Quiz Failed

Issue:
I'm trying to publish an Adobe Presenter 7 course with a quiz using SCORM 1.2. I am publishing to our LMS (Cornerstone OnDemand). The course loads and plays fine. However it always reports a complete status to the LMS - even when I fail the quiz. I can even see the score (10 out of 50 points), but the status still shows as completed when it should be incomplete. The pass threshhold is set to 50 points...and yet any scoring allows a completed status.
Questions:
1. Has anyone used Presenter with CSOD?
2. Has anyone used Presenter with any SaaS LMS?
3. Which settings are required to acurately reports a status?
Thanks,
Dan

On top of Ravi's suggestion, what I would also recommend is checking the "scorm_support.js" file which can be found in your Scorm Support folder---this is automatically created when you publish your PPT deck.
Open the scorm_support.js file using Notepad, Notepad++....anything other than Word. From there, look at the top of the js file and you'll see a few variables which help to establish the SCORM setting of the training, but the one to look for looks like this:
var g_nAPI = 1;
if that variable is set to "0", then your published content will trigger SCORM 2004, not 1.2.
I've seen this come up on a few occasions, but ever since upgrading my version of Presenter to 7.0.5, this has gone away.
Additionally, there are a few other things you can do which might help in terms of deploying content in your LMS:
1. I would strongly recommend downloading the ADL SCORM 1.2.7 test suite. What this basically does is allow you to test the conformity of the SCORM package of a published Presenter course to determine if problems exist BEFORE you post your files to an LMS. You can download the test suite here:
http://www.adlnet.gov/adlnews/Documents/News%20Archive/TheSCORMConformanceTestSuiteVersion 127SelfTestisAvailableforDownload.aspx
2. If you have an LMS admin at your disposal, be sure to check with that person for deployment criteria when your content is installed on the LMS. If YOU are that person, then you have some homework to do--because you're going to need to know how to run installation procedures and content checks on your training as recommended by the LMS software.
I've developed and deployed Presenter content on a variety of LMSs, and some have nastier quirks than others...so one solution may not fit every environment, but you have to keep checking! I would also try reaching out to your LMS's tech support if possible.
Rob
http://www.robrode.com/yabb/

Publishing Problems with Adobe Presenter 9

I downloaded the free trial of Adobe Presenter 9 and created a video/Powerpoint presentation. However, when I went to "Publish" (to YouTube), it stalled at 5%. Did I just waste many hours that I really don't want to do again? It's an hour long presentation! I have Windows 7 and I've updated all my drivers on my laptop but it still won't publish. Now what? I can't even find the file so I can try it out on another computer.

Hello Emily,
Greetings from Adobe.
Did you try to update the drivers from Device manager > Display Adapters ? Please try to update the drivers from Intel website using the driver version.
Also, have you tried to uninstall and reinstall the Presenter 9 after updating the drivers ?
Regards,
Ajit

Publishing Presentation to Private Server (Adobe Presenter 9)

I cannot get my entire presentation to show publish to my work's FTP server. The presentation will work perfectly when I publish locally on my computer, but once I move the folder to the FTP, the video will not appear. The audio and everything else seems to work fine.
Is there something I am missing when I copy the folders?
I haven't been able to find much info on this subject in general, as it seems I must be the only one not using Adobe Connect Server.
Any guidance is appreciated.

Hi
Please try different browser and confirm the issue.
Can you share the sample file with us ?
Please create a package file and mailto: [email protected]
also, Please share a content link where you have uploaded the content on the server if it is accessible from the public network.
I will try to resolve your issue at the earliest.
Thanks,
Sunil kumar sahu
Adobe Presenter Engg Team

Video playback issue for Adobe Presenter 9 when publishing to Adobe Connect Pro 7

Hello!
I am having an issue with video playback for Adobe Presenter 9. When I preview the presentation on my computer there are no issues with any of the MP4 videos that I have loaded into my presentations. However, when I publish the presentation to Adobe Connect and access the URL the videos are either delayed or do not appear at all. We are using our own Adobe server which we purchased in 2008, along with Adobe Connect Pro 7. We recently updated our Adobe Presenter software to version 9. Is there an incompatibility issue between Adobe Presenter 9 and our current Adobe Server/current version of Adobe Connect? Or do I need to do something different in Adobe Presenter when importing the videos? Note: I have tried FLV videos and had the same issue.
We are trying to launch of series of webinars (each webinar has between 15-42 slides), which was the whole purpose of updating our Adobe Presenter and Adobe Captivate software....hopefully we can resolve this video issue.
Thanks!
Dana

Connect 7 didn't support MP4 video content, as I recall. Another issue is that Connect rooms are using Action Script 2 (AS2) while Presenter 9 uses AS3, and the two code languages don't play well together. You don't mention if you are using the meeting application to display the presentation, but it is worth mentioning. If the presentations are stand alone, then the AS3 issue should be non-existent, but the MP4 support may be.
Is there a reason you haven't updated the Connect software to Connect 9 (or at least Connect 8.1 where the Connect application became AS3 as a whole and supported MP4 content)?

Using Adobe Presenter 7 when published to PDF video files do not play just a blank page, any ideas?

Using Adobe Presenter 7 when published to PDF video files do not just a blank page, any ideas? I am using office 2010 and Adobe Acrobat 9 on my PC any suggestions would be very helpful as the audio and slides work fine though no SWF files work just a blank white screen
Thanks

The problem seems to be with Acrobat 9. Can you share any such pdf generated from presenter at [email protected]
Alternatively, you can try to download Adobe Reader 10 http://get.adobe.com/reader/?promoid=JZEFU and try to view the published output usingthe same.

Adobe Presenter 8 Video Creator crashes when publishing

After capturing a video and demonstration using Presenter Video Creator, I am able to edit the video, choose whether I show talking head, demo, or both. The program seems to record everything as I would expect. However, when I attempt to publish, it goes to 5% and then gives me this error: "Application encountered an internal error." It does not matter if I try to publish to my computer, adobe connect, or anything else. I see so many great possibilities for this product, but if I can't publish, then it is completely useless to me. Does anyone have a fix for this?
Adobe Presenter Video Creator version: 8.0.1.260, 64-bit
Thanks,
JJ

Are you getting the internal error during publishing? or is there any other issue with the Video creator.
Can you explain the whole process at which you are getting the internal error?
The latest graphics driver provided by Intel is of version (6.14.10.5437) dated 2/13/2013.
Did you downloaded and installed the driver by traversing through this link http://www.intel.com/support/oems.htm
Did it throw any error while installing the driver?
Please mention your system name and identification number, i'll check whether your system manufacturer is providing any new updates for your graphics driver.
Also mention the name of the camera you used for recording.
Please make sure you are following the below checklist for recording any new video.
This is a general checklist that should be followed before using Video Creator.
Are your video card driver is up to date? Please check whether you have the latest driver from the manufacturer’s site.
Are all unnecessary applications closed?
Do you have sufficient free space on your hard disk? At least 5 GB is needed, but around 15 GB is recommended.
Are your webcam drivers up to date? It is recommended to install the webcam driver from the webcam cd or the webcam company’s site.
Are you capturing your video in a well-lit environment? Most webcams perform poorly in bad lighting.

Adobe Presenter Multi Language Publishing Support?

Hi,
I have a requirement where I wanted to convert the English course into the following 26 languages:
Arabic
Chinese (Simplified)
Chinese (Traditional)
Croatian
Czech
Dutch
Finnish
French (Europe)
German (Germany)
Greek
Hindi
Hungarian
Indonesian
Italian
Japanese
Korean
Polish
Portuguese (Brazil)
Romanian
Russian
Slovakian
Spanish (Europe)
Spanish (Latin America)
Swedish
Thai
Turkish
Can you please let me know, if it is possible to do that in Adobe Presente(Any version will work), and how? Dose Presenter supports publishing in all these languages?
Ajit Danve
Sr Developer
Aptara, Pune.

The player skin carries text for: German, English, French, Spanish (Spain), Itialian, Dutch, Chinese (simplified), Japaniese, Korean, Poruguese (Brazil), Russian and Turkish. These text lables will display based on the OS language setting of the viewer. You could modify any of these text lables to be in any other language, and, if you are adept enough, could possibly modify the file that holds the text lables and the XML that calls to it to have additional text.
However, for the content of your PPT and the audio associated with it, you would need to have someone or something do that conversion for you. Traditionally called globalization, there are a number of groups that do it out there. Feel free to PM me if you want info on the group we use.

Presenter 7.07 error. "Adobe Presenter is unable to publish this presentation...."

Hello,
I am getting the following error for only one presentation out of perhaps 200 that my team and I have published in the last 3 years. "Adobe Presenter is unable to publish this presentation. Please check that you have enough disk space and you have appropriate permissions for the destination folder.'
1. Plenty of disk space
2. Correct permissions
3. Can publish other presentations in that same folder.
4. Running Windows 7. As mentioned, have had no other problems with this for past and current presentation publication. Just this one file.
5. We have copied and pasted from this file into a clean file. No avail.
6. We have had two people try to publish it from different computers and have gotten the same error so it isn't a Windows profile issue.
Anyone have any suggestions?
Thanks,
Greg

I just had the same problem after adding a long description in the SCORM settings. Try shortening your description, title, or Identifier on the reporting tab under Manage for Quiz. This fixed two different files that we were having issues with.

Publishing in Adobe Presenter

Similar Messages

Maybe you are looking for