Adobe Presenter Always Passes Complete Status to LMS - Even When Quiz Failed

Issue:
I'm trying to publish an Adobe Presenter 7 course with a quiz using SCORM 1.2. I am publishing to our LMS (Cornerstone OnDemand). The course loads and plays fine. However it always reports a complete status to the LMS - even when I fail the quiz. I can even see the score (10 out of 50 points), but the status still shows as completed when it should be incomplete. The pass threshhold is set to 50 points...and yet any scoring allows a completed status.
Questions:
1. Has anyone used Presenter with CSOD?
2. Has anyone used Presenter with any SaaS LMS?
3. Which settings are required to acurately reports a status?
Thanks,
Dan

On top of Ravi's suggestion, what I would also recommend is checking the "scorm_support.js" file which can be found in your Scorm Support folder---this is automatically created when you publish your PPT deck.
Open the scorm_support.js file using Notepad, Notepad++....anything other than Word. From there, look at the top of the js file and you'll see a few variables which help to establish the SCORM setting of the training, but the one to look for looks like this:
var g_nAPI = 1;
if that variable is set to "0", then your published content will trigger SCORM 2004, not 1.2.
I've seen this come up on a few occasions, but ever since upgrading my version of Presenter to 7.0.5, this has gone away.
Additionally, there are a few other things you can do which might help in terms of deploying content in your LMS:
1. I would strongly recommend downloading the ADL SCORM 1.2.7 test suite. What this basically does is allow you to test the conformity of the SCORM package of a published Presenter course to determine if problems exist BEFORE you post your files to an LMS. You can download the test suite here:
http://www.adlnet.gov/adlnews/Documents/News%20Archive/TheSCORMConformanceTestSuiteVersion 127SelfTestisAvailableforDownload.aspx
2. If you have an LMS admin at your disposal, be sure to check with that person for deployment criteria when your content is installed on the LMS. If YOU are that person, then you have some homework to do--because you're going to need to know how to run installation procedures and content checks on your training as recommended by the LMS software.
I've developed and deployed Presenter content on a variety of LMSs, and some have nastier quirks than others...so one solution may not fit every environment, but you have to keep checking! I would also try reaching out to your LMS's tech support if possible.
Rob
http://www.robrode.com/yabb/

Similar Messages

Training complete even though quiz failed

Another question: I've uploaded a course with quiz to our
LMS. When someone fails this Training the LMS generates a mail
stating training completed, despite the failure.
The LMS thinks that becuase all questions were answered now
the course is done. Anyone any suggestions on how to fix this?
Thanks,
Charlie

The situation you're describing is technically not an error.
The user got to the end of the course, so the training has in fact
been completed.
If you want the LMS to report complete only when the course
has been completed AND passed, take a look at your LMS settings and
see if you can configure that behavior in the LMS.
If not, you could try playing with the Captivate Quiz
preferences to change how the score is reported. Make sure it's
reporting the score as a number or percentage, rather than
complete/incomplete. The exact setting (or combination of settings)
will depend on what types of values your LMS can/will accept.
As a final resort, a search of the e-Learning forum here
should unearth some workarounds folks have posted that hack the
Javascript code used for reporting to only submit completion
information when the user has passed.
Regards,
John

Adobe Bridge will not show items in subfolder even when this option is checked.

Adobe Bridge will not show items in subfolder even when this option is checked. It works on one computer but not the other-both working on the same system/ version of adobe cc.
How can I fix this bug?

Check to see what is different between setups. You may want to reset prefences in the balky computer.

Hi, im having problems with my iphone it would always be showing up "No Service" even when I get my simcard out, when i turn airplane mode it would switch to " Searching" and then go back to "No Service", i have tried restoring several times, but nothing

Hi, im having problems with my iphone it would always be showing up "No Service" even when I get my simcard out, when i turn airplane mode it would switch to " Searching" and then go back to "No Service", i have tried restoring several times, but nothing has changed. I must say that my iphone was working perfectly until the last months my battery began to die all from a sudden, so my phone got turn off really frequently, so then i ordered a battery and changed it myself so when phone was on.. it had this problem.. im desperate here

No I haven´t take it to Apple Store, i think I will actually. My iphone was jailbroken and ulocked with gevey sim, but when this failures began i decided to restore it, and I did preserve the baseband, but when I took it into one of these "Places" they told me it would be a good idea to do a clean restore and see if this fixed the problem so I upgraded my baseband, and right now my iphone is freshly restore, no jailbreak no nothing.
Btw yes something like a year ago my screen was replaces by others not by apple, but I didnt had any issues after this.. until today (a little more than a year later).

Adobe Presenter - AICC No Completion in Saba

I am currently testing integration with Adobe Presenter courses using the Saba LMS and AICC import. The training content is on a different domain than LMS so I have used the frameset and crossdomain.xml workarounds suggested in another Adobe forum post. Everything is fairly successful, however, even when I have completed the content according to the completion rules set in Adobe and the content module (lesson) shows as complete on My Enrollments, the course is still showing as Not Evaluated in general and is not moved from My Enrollments to My Transcripts. I tried with Captivate and it is updating the content module (lesson) complete in Saba and also marking the course as complete and moving to My Transcripts.
Why is Presenter not working the same way? Any advice is appreciated. Thanks!

First, the best place is probably the Presenter forum, which somewhat curiously is under the Connect umbrella:
http://forums.adobe.com/community/connectpro/connectpro_presenter
Out of curiousity, why are you using AICC? Because the content is on a different domain?
To the point, it's great to have a logging or debugging tool for these sort of things to view the communication between the LMS and the lesson. Perhaps the lesson is sending the 'completed' status but also sending some other value that the LMS is using to change the status back to incomplete?
My first suggestion would be to try the lesson in a tool like TestTrack...but I don't think that handles AICC. Does the Saba LMS have any kind of debugger or logging tool you can use? You really need to see if the lesson is sending the status back to the LMS as you suspect it should. If it IS, then the issue lies with the LMS and how it's interpreting that result. If it's NOT, then you can then perhaps figure out what to adjust in the lesson.
In general, just play with the settings. If it's set to Complete/Incomplete and has a Mastery Score, try NOT setting the Mastery Score... And other such combinations.
I hope the folks in the Connect/Presenter forum can provide more insight.
Erik

What are the settings under SCORM 2004 to indicate the completion status on LMS

Hi everyone,
I have a captivate file which i have published as scorm 2004 compliant and checked that file on the scorm cloud. It worked well.
SCORM Pacakage does note report partial completion. When a person stops training, we have the progress bar to indicate that they are at 0, 25, 50, 75 or 100%.
Problem: I dont know exactly, what are the settings to enable to indicate the completion status. I tried but it didn't worked.
Please help & suggest the right way to do this..
Regards
Vikas Sharma

anybody there.... pls help

Shipping status becomes backordered even when item is present in inventory

Hi,
1.The shipping status becomes 'Back ordered' after pick ship release process.
2.The onhand quantity form(inventory-->on-hand,Availability--->on-hand quantity)
shows zero(even when 100 qty is present) when queried for that particular item.
3.When tried increasing the quantity (inventory--->transactions-->miscellaneous transaction)it shows 100 quantity available. If i try adding more it shows the following error:
APP-INV-05647:The remote call failed because no manager was available.
I checked the following.
1.The status of the four interface managers are active.
2.The columns for "Available" and "Target" for the Inventory Manager and the Remote Procedure Manager were not equal and tried restarting them. Even then the numbers are not equal.
how to solve this problem?
Thanks & Regards,
Nithya

Hi,
Probably the quantity you are seeing in the ATP form must be reserved and so your pick release is getting backordered.
I did a quick Metalink search for your error, and the following is the result:
fact: Oracle Work In Process 11.5.3
fact: WIPTXSFM - Move Transactions
symptom: Receive error when processing WIP transactions
symptom: APP-INV-05647 The Remote call failed because no manager was
available
symptom: Locks for the process INVTRM in table
MTL_MATERIAL_TRANSACTIONS_TEMP
cause: The cause of this problem is still undetermined.
fix:
Update file wipsorvb.pls to version 115.26 or higher. Apply Patch 2084821 or
later.
Someone else tried the following :
Change the following profile option :
TP:Server Side Online Processing = No
and this solved their problem.
Try it out and check whether this resolves your issue.
HTH

Adobe project file is hogging shared storage bandwidth even when paused

I have a particular Premiere Pro project, that when opened, completely hogs my Terrablock storage bandwidth. I have inserted a screenshot of the storage servers disk activity even when that project file is paused. I have no other project files open or file transfers going. When I close this project, all disk activity goes to zero. This happens with no other projects and I can open it from other Mac towers with the same result.
Here is an image of the disk activity with that project open and paused.

Hi Mark,
Since my original post, I have noticed at least one other project hogging the storage bandwidth. Both projects are accessing completely different files and have a varying number of sequences.
The first project has about 45 sequences with none of them over about 90 minutes in length. The sequences are referencing .mp4s and are multicammed with two shots and occasionally contain another camera laid on top of the footage. The graphics were exported as Quicktime files and are only included in some of the sequences. This project also contains some title cards along with some png and psd files. The original stringout sequences of the footage were imported into the project using Media Browser.
The second project has 13 sequences and is referencing Quicktime Proxy footage including multicams containing two different shots. Most of the sequences contain only about 10 minutes of footage at the most. There are numerous title cards throughout this project and some of the shots are scaled in a bit. This is a duplicate of the original project (which is not hogging bandwidth) and somehow started causing bandwidth problems during the edit. No sequences were imported either.
I have also noticed that both of these projects somehow make Premiere Pro 2014 unable to close. A force quit is required for both to exit out of the program or open another project.

Updates app *always* thinks I have an update, even when I don't

This is more than an annoyance than anything else but the OCD in me would love to get it resolved. I have a Verizon Palm Pre + (1.4.1.1) with a bunch of apps installed plus Preware for some patches. Sometime in the last month or so (I don't remember when exactly), the Updates app started acting a little strangely. Now, when I run it, it always tells me there are updates available and presents me with the Show Updates button. So I press the button and most of the time, there are no actual app updates available. Sometimes there are some available and that works fine to update them.
So:
how can I get my Updates app to stop telling me that updates are available when they are not?
Additional news: Preware doesn't show any updates required
Thank you!
Will

Hello and welcome to the forums;
This issue has been reported to our engineering department, however it is not affecting everyone. Since you have Preware/patches/homebrew installed, the first step I need to suggest is to remove all Preware/patches/homebrew and perform a partial erase, then try the Updates app.
As some patches persist even after a partial erase, if you still have problems with the Update app, I would also suggest reinstalling the OS using the webOS Doctor and trying the Updates app again.
If after this you still see the problem, then you may be affected by this known issue.
Hope this helps,
TreoAide

Adobe Flash Player won't install into Firefox, even when using the offline installer, and downloading it through Firefox

Ever since the latest update of the Adobe Flash Player, I think it came out this week.
I can't seem to get it to work with Firefox, I have downloaded the installer, it installs successfully, then I check in Firefox to see if it works. It says that I need to install it?!?! I have tried the offline installer of the Adobe Flash Player, I also tried installing it through Firefox (when you click "Install missing plugins"). That just fails instantly.
I posted on the Adobe Forums, but no luck.
I am getting frustrated with this! I have never had problems with installing the Flash Player, and I didn't install this version any different from the previous versions. Flash Player was working well until the latest update of Flash Player was released.
If I go to C:\Windows\System32\Macromed\Flash, it shows all the Flash Player files, but it's not showing up in the Firefox addon manager, and not working on YouTube, or any other Flash Player sections of sites.
I installed the 64-bit version, because I have a 64-bit Windows.
It works on IE, but not on Firefox.
It seems like it installs fine, but then it doesn't looks like it "installs" it into Firefox. Or whatever...
Also, I have tried uninstalling it with the Adobe 64-bit Uninstaller, restarting my PC after uninstalling, then install the 64-bit Flash Player for Firefox... doesn't work.
I have done EVERYTHING I can do to try and get it to work, no luck...
Please, any help with be appreciated!

Where can I find direct downloads of Flash Player 11 for Windows or Macintosh?

How do i always send from one email address, even when replying?

Hello all
I just moved to MAIL after 12 years of Eudora.
I’m MAIL 2.1.3 in Mac OS 10.4.11 PPC.
my problem
People send emails to me at 2 different email addresses. Both of them are stored on two different servers, and thus two different POP setups. Let us call them Eunice.net and Poppy.net
I have MAIL setup to pull my emails off both different servers. I think it would be best to always send emails from one particular email address, ([email protected]) using the one particular email POP server. (Eunice.net)
My problem is that when I get an email sent to me at Poppy.net, want to hit reply and have it go out by way of the Eunice.net SMPT (POP) server (and with the return address as [email protected]
The problem is that I can’t find a way to configure my Preferences/Accounts to make this happen. As of now, I hit reply to an email sent to [email protected]… and it tries to send the email out via Poppy.net (and fails) - i get an error messsage.
Thanks for any help!

Mail, Preferences, Composing, Send New Mail from is indeed set properly - so this is why i'm baffled.
Note that this setting is "Send New Mail from", in other words, when you create a New message, not Reply to an existing message. When you create a new message, does it do send from the specified account? Note that this will only work if no message is selected, else it will create the new message using the account of the selected email (assuming Mail can figure out the account from the header).
The following is copied from the Mail help (note how it handles New messages and Replies differently):
*+How is the "From" address determined in a new message or a reply?+*
+Mail will try to determine the correct "From" address to use when you compose a new message or reply to a message.+
*+When you compose a new message, the From address is selected in the following order:+*
+If a message is currently selected, Mail uses the account the message belongs to, if it can be determined from the headers of the message, or by the IMAP mailbox the message resides in.+
+If an IMAP mailbox is currently selected, Mail uses the account the IMAP mailbox belongs to.+
+If no message or mailbox is selected, Mail uses the email address for the first account listed in the Accounts pane of Mail Preferences.+
*+When you reply to a message, the From address is selected in the following order:+*
+The To and Cc fields are compared to email addresses you have set up in Mail Preferences. Mail uses the first matching address it finds as the reply address.+
+If the message is in an IMAP mailbox, Mail uses the email address for the account the mailbox belongs to.+
+If all else fails, Mail uses the email address for the first account listed in the Accounts pane of Mail Preferences.+
One way to ensure that the messages are sent using the Eunice.net SMPT (POP) server is to set that server as the SMTP server in your Poppy mail account (putting your Eunice settings in the SMTP server settings dialog). That won't address the ReplyTo issue (although you can set that manually in the ReplyTo field, accessed via the button next to the subject line).
Hope this helps...

U410turns itself off completely with a noise even when its cold.it has been to the guarantee 3x

Hi. I have purchased a lenovo ideaPad U410 last christmas in a PC world shop (UK), it was a gift to my father, and when we were setting up windows. it turned itself off. We had no time to give it back to the shop because we were trying to enjoy our holidays abroad. we have tried many times to check what the problem was, spending money with expensive technicians, but nobody got it right. We have sent it to lenovo guarantee services in Spain (where I live) once. They said they had fixed it, but it came back with the same problem. Then I ´ve sent it again.... and guess what? It came back with the same problem. (i have both papers to prove, i can send you a copy) We could NEVER use this lap top during the whole year.Everytime we tried, it turned itself off . Now I have finally sent it to the UK to see if they can fix it there, paid 50 euros for the package, but to be honest, I am completely fed up.My guarantee ends in the end of the year (christmas). I really hope you can give me a new lap top that works, or my 500 pounds back, so I can buy a new one to my father. This has been a nightmare, waste of time. the company MEDION AG has it now, and the product reference number is IDEAPADU410AMBLTXI33217U4G5248MGB . Please someone follow up with this case. Cheers.

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Iphone 4 always tries to connect to 3g even when there is no 3g.

..... So simply it never ever connects to GPRS or EDGE which is an absolute pain because I work and live in a place with limited 3G. Can anyone recommend a solution?

If the option to disable 3G is not available on your phone, that's because your carrier has decided to remove it. Probably because they are in the process of completely shutting down their EDGE network (AT&T's is scheduled to be almost completely gone by the end of 2014).
Contact your carrier.

New 8 Core MP passing power to firewire ports even when turned off???

Is anyone else noticing this? Even after you have turned the power off to the MP 8 core, power continues to travel through the firewire ports?

Some FireWire functions work with the computer off. See:
<http://developer.apple.com/documentation/HardwareDrivers/Conceptual/HWTechFireWire/Articles/FireWimplementation.html>
and
<http://developer.apple.com/documentation/HardwareDrivers/Conceptual/MacPro_0801/Articles/ProductDeveloperNote.html#//appleref/doc/uid/TP90005242>
"When in sleep, the Mac Pro has 25 W of power available to the USB and FireWire ports, and memory. If the combined USB and FireWire port power load exceeds the available power, power to those ports will be cut to preserve memory."

Hiding rows/columns completely in SSRS tablix even when they have data

I have several columns and rows in my tablix. I don't want to see all of them at once. I am using a parameter that controls the visibility of the columns or rows of the tablix. The issue is that it hides but the white space is left.
How do i take out that white space?

Is the columns inside a group?If yes you've to set visibility property for group too in addition to rows and columns.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Adobe Presenter Always Passes Complete Status to LMS - Even When Quiz Failed

Similar Messages

Maybe you are looking for