Purchase Order not created for a Shopping Cart

We have a few Shopping Carts created in SRM which did not transmit as PO to our backend R/3 system. This happened because our R/3 system went down for a couple of hours and the Shopping Carts were created during this time. We tried to submit these Shopping Carts through the Application monitor later and the SRM system gave a message "Processed Successfully". However, POs for these Shopping Carts were not created and the Shopping Carts have a status of "Item in transfer process".
The Shopping Carts have already got a PO number assigned to them through the SRM system. However these PO's have not been created in the backend R/3 system
We are struggling to find the failed RFC calls with the help of BASIS so that we can possibly reprocess them. Alternatively we are also looking for a way to retrigger the PO creation for these Shopping Carts.
I need ideas to resolve this issue.
Many thanks in advance.
Susmit

Not sure if you received an answer or not, but this is what we have had to do in the past:
1.  Run BBP_PD for the shopping cart to see what the purchase requisition number will be on the backend system.  The requisition number will still be provided even if it fails to transfer to the backend.
2.  Run FM BBP_PD_SC_RESUBMIT.  The object key field will be the requisition number; the object ID field will be the shopping cart number.
Hope this helps.
Monique Stephens

Similar Messages

  • Work flow not created for the Shopping Cart

    Hi one of the customers created a shopping cart,in approval overview it is showing as no need of approvals,but the status of approval is 'awaiting approval', but workflow is not created for the Shopping cart. advised to re-order in change mode but still no use. please advise.

    Hi,
      what do you see in SLG1? Check the below t.codes
    SM58 - check for stuck remote function calls
    ST22 - check for system dumps
    SM13 - check for stuck update requests
    SM21 - check in the system log for anything unusual
    SWUD - run a consistency check on the workflow
    Saravanan

  • Purchase order not created for correct item in WGSREQ

    Hi Experts,
    When we use inbound Idoc type WGSREQ in Retail, with 2
    items for example, where the one item is incorrect, to create
    a purchase order, the system incorrectly does not generate a
    document for the correct item.

    Dear Plamen,
    Check following points
    (a) Article master listed or not for your Store / DC
    (b) Info record is there or not?
    (c) Check Vedor master extended to relevant purchase organization or not?
    Hope this info will be useful.
    Regards,
    Muralidhara

  • SRM Purchase Order not Created Automatically

    SRM 7.0 Extended Classic Scenario:
    Issue:  When creating a standard shopping cart in SRM the Purchase Order is not created in SRM (or in R3).  Eventhough the shopping cart is fully approved and has a vendor assigned.  The overall shopping cart status remains approved,the line items status shows 'item in transfer process'.  Otherwise there are no errors in the application monitor.  Nothing appears in table BBP_DOCUMENT_TAB
    Considerations:  Everything is working fine for limit shopping cart, the PO gets created automatically and the SC has status follow-on document created.
    Also, this was working fine for standard orders, it seems that support pack 7 or 8 broke this functionality, yet I do not see any notes regarding the issue.  Any ideas on what controls the automatic PO generation or how it could work for limits but not standard SC's would be greatly appreciated.
    Thanks,
    Matt
    Edited by: Matt Joseph on Nov 17, 2010 10:27 AM

    First of all PO should be created then you can see entry in doc table.
    u Note 1480994 - How to process a shopping cart with status I1111?
    see SAP treatment and some work around..
    Symptom
    Shopping Cart is stuck in status I1111 (Item in transfer process).
    Other terms
    Application Monitor, I1112, I1111, Monitor Shopping Cart
    Reason and Prerequisites
    This is a FAQ note, which shows how to treat such Shopping Carts.
    Solution
    Shopping Cart status I1111 (Item in transfer process) is a temporary status, which means that shopping cart is being processed in order to generate a follow-on document.
    However, it is possible that status I1111 becomes permanent and, in this case, shopping cart status is inconsistent.
    There are some procedures to be considered when shopping cart is stuck in status I1111.
    Report BBP_ALERT_SB_NOTTRANSFERED is available to change the status of the shopping cart item from I1111 to 'Error in transmission' (I1112) and later on, it is possible to retransfer this shopping cart from Application Monitor/Monitor Shopping Cart transactions.
    Note 441768 provides more information about this report.
    However, BBP_ALERT_SB_NOTTRANSFERED works in a time stamp. BBP_ALERT_SB_NOTTRANSFERED will check shopping carts created after date specified in table BBP_CONTROL.
    To check this information, go to SE16 -> BBP_CONTROL and as input parameter provide the report name. Here you will see the last date that report has been run.
    If you have a shopping cart in status I1111 which is older than date specified in table BBP_CONTROL, you have to change manually the time stamp specified in such table. You have to specify an older date (before shopping cart creation).
    Doing this, you can run report BBP_ALERT_SB_NOTTRANSFERED and cart in question will have status I1112 assigned.
    Once status I1112 is assigned to shopping cart, you can retransfer it from Application Monitor (BBPWEBMONITOR transaction in SAP_GUI) or Monitor Shopping Cart in the web.
    To transfer Shopping Carts from BBPWEBMONITOR, some settings need to be done.
    Following notes should be considered:
    550044
    FAQ Alert monitor RZ20 does not show any alerts
    396102
    BBP Alert monitor RZ20 does not work
    387701
    The Shopping Card are not transfered after "resubmit"
    According note 387701, workflows WS10000214 and WS10000215 have to be activated. One of them is to delete shopping cart item using Application Monitor and the other one is to resubmit the cart. Then, once this settings are done, you can retransfer I1112 carts from Application Monitor.
    If all settings are done and you have a cart with status I1112 that it is not appearing in Application Monitor, report BBP_ALERT_SC_STATUS_ERROR is available, which checks the carts in status I1112 and put them in the Application Monitor, in order to allow you to transfer them again. Note 631513 explains about this report.
    Additional notes to be considered in this scenario:
    1159609
    Transfer function does not create local purchase orders
    1233037
    BBP_MON_SC: Shopping cart transfer ends in status I1111
    1040878
    Cannot transfer shopping carts with status I1112
    Header Data
    Release Status: Released for Customer
    Released on: 09.08.2010  16:04:09
    Master Language: English
    Priority: Recommendations/additional info
    Category: Consulting
    Primary Component: SRM-EBP-SHP Shopping Cart
    Secondary Components: SRM-EBP-APM Application Monitors
    Affected Releases
    Release-Independent
    Related Notes
    1233037 - BBP_MON_SC: Shopping cart transfer ends in status I1111
    1159609 - Transfer function does not create local purchase orders
    1040878 - Cannot transfer shopping carts with status I1112

  • Goods receipt  for purchase order not allowed for a particular wbs

    hello everybody..
    Am creating a good receipt for a purchase order using the T-CODE-: MIGO...
    While doing so am getting an error as " goods receipt  for purchase order not allowed(wbs element)".
    What can be done to rectify this error?
    Plz do help me....
    Regards,
    Deepika
    Moderator message: not directly related to ABAP development, please have a look in the appropriate functional forum, study the long text of this error message.
    Edited by: Thomas Zloch on Dec 1, 2010 5:52 PM

    Hi Br. Ajay M,
    Released the order and Status line as follow
    REL  AVAC BUDG GMPS
    but the error changed while reverse the document
    item 0001 Order is invalid.
    Many thanks for your kindly reply.
    regards,
    Steven

  • Purchase order not create in sus

    Dear customizer,
    Ihave implemented a plan driven procurement with sus (r/3-sus) scenario,we have a problem when we transfer idoc from r/3 to sus.In sus sistem give me this error message
    "An error occured within an XI interface: Exception occurredE:BBP_PD:BBP_PD:051 -No address found for partner function type Sold-to Party E:BS:002 -"Create" is not allowed (SUS Purchase Order 4500000006 )CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>"
    I hope in your answer.Thank best regards.
    Pernasetti Alessio

    Hi,
    Please check the following things.
    Check whether the roles delivered by SAP meet your requirements. If not, you can create new roles and assign transactions to them. We recommend that you copy standard roles and tailor them to your requirements.
    All users assigned to a respective role are then allowed to carry out the transactions. If required, you can refine the authorization check on the tab page Authorizations.
    Standard SAP Single-roles
    SAP_EC_SUS_ADMIN_PURCHASER (for purchasing administrators - SAP Supplier Self-Services)
    SAP_EC_SUS_BIDDER (for bidders - SAP Supplier Self-Services)
    SAP_EC_SUS_DISPATCHER (for dispatchers - SAP Supplier Self-Services)
    SAP_EC_SUS_INVOICER (for invoicers - SAP Supplier Self-Services)
    SAP_EC_SUS_ORDER_PROCESSOR (for order processors - SAP Supplier Self-Services)
    SAP_EC_SUS_MANAGER (for managers - SAP Supplier Self-Services)
    SAP_EC_SUS_SERVICE_AGENT (for service agents - SAP Supplier Self-Services)
    If you want to use SAP Supplier Self-Services, proceed as follows:
    1. Select one of the following single roles:
    SAP_EC_SUS_ADMIN_PURCHASER
    SAP_EC_SUS_ADMIN_VENDOR
    SAP_EC_SUS_BIDDER
    SAP_EC_SUS_DISPATCHER
    SAP_EC_SUS_INVOICER
    SAP_EC_SUS_MANAGER
    SAP_EC_SUS_ORDER_PROCESSOR
    SAP_EC_SUS_PRODUCT_MANAGER
    SAP_EC_SUS_SAR_PROCESSOR
    SAP_EC_SUS_SERVICE_AGENT
    SAP_EC_SUS_SERVICE_MANAGER
    2. Choose Change Roles.
    3. Choose the Personalization tab page.
    Note: The personalization applies to all roles, meaning the user can also create his own roles, for example copying the delivered SAP SUS roles. He can tailor these roles to his requirements by changing the SUS-specific attributes (BBP_SUS_ROLE_ATTRIBUTES).
    1. Select the entry BBP_SUS_ROLE_ATTRIBUTES (SUS-specific role attributes).
    2. Choose Change values.
    A dialog box for maintaining SUS-specific roles appears.
    3. If required, perform the following steps:
    If the role should be displayed in the SUS User Management (UM) and should be able to be assigned to the relevant user by the supplier administrator, set the indicator to display the role in SUS UM.
    If the user should be displayed as a service agent for the purchaser, set the Service agent indicator.
    If you want to define the user as an SRM administrator, set the SRM administrator indicator. The user is then authorized to change all supplier data.
    If want to assign the role SUS administrator automatically to the user during registration, set the SUS administratorindicator.
    Sets the relevant indicators if you want users to receive the following notifications: Notification If Purchase Order Not Opened, Notification If Purchase Order Response Is Missing, Notification If ASN Is Missing, Notification If ConfirmationIs Missing, Notification If Invoice Is Missing,
    Award the points for the help.
    BR,
    Vijay Mittal

  • Purchase order not visble for confirmation in SRM 7.0 portal

    Hi all,
    I am basically a portal consultant .The functional consultant configured in such a way that once the user creates a shopping cart it will create a Purchase order.
    But when i go into central confirmation role  and click on create confirmation document and search for the Purcahse order it is not getting displayed.
    But There are some 11 pos in the system with 9 pos of  status order and  2 pos status saved.
    Please help me in resolving this.
    Thanks and regards,
    Rajesh
    Edited by: Rajesh A on Jul 2, 2009 2:24 PM

    Hope you might have some option called Express confirmation. check it up.
    You can use this business process to confirm the receipt of goods. In SAP SRM, purchasers can create confirmations themselves, even if the purchase order is in the back-end system. It is possible to create express confirmations directly in the Check Status application without having to switch to another application.
    Alternatively, an internal dispatcher or shipping department can take delivery of goods and confirm centrally. In this case, an additional approval workflow through the supplier is possible. Then, the goods receipt is posted in the back-end system.
    You can also cancel an existing confirmation at item level. In addition to all of this, you can return partial quantities of individual items (or of all items) to your suppliers, and state the reasons for these return deliveries. These reasons are also transferred to the back-end system
    br
    muthu

  • Third Party Sales: Automatic PO (Purchase Order) not created.

    Dear All,
    I am Implementing thirdparty business process where goods are directly moved from vendor to my customer.
    As per my customer requirement I want to create Automatic PO for the Purchase requisition created from Sales order.
    For this I have done the following settings:
    Marked vendor relevant for Automatic PO.
    Marked Material relavent for Automatic PO
    Marked Sales Item Category relavent for Automatic PO.
    While I saved my sales order Purchase requision was created and system unabel to create the Purchase order automatically. If you encounter this situvation please share your views.
    Thanks & regards

    Hi
    In third party you will not be able to create automatic PO
    The schedule line category CS settings in VOV6 order type NB, MM item category 5 and account assignment category settings as X and in VOV7 for TAS create automatic PO ticked will ensure PR creation only and not PO
    As suggested by the other friend you need to run t code ME59N or ME59  for automatic PO creation but certain condition to be met
    1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked;
    2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked;
    3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO;
    4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record.
    You have to run ME59N transaction  manually or schedule this as  a background job
    Regards
    Raja

  • Automatic creation of Purchase order not possible for 103 mvt type

    Hi,
    If i could configure "create p.o automatically", while doing G.R for mvt type 101,
    why cannot i do the same with 103 mvt type.
    I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
    It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
    Which entry controls the above my requirement?
    Please advise .
    Thank you.

    Hi,
    These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

  • Instance of Purchase order not Created

    Hi Floks,
    We are trying to change the Quantity of PO item using user exit J_1I7_MIGO_SAVE during the MIGO. We are calling BAPI_PO_CHANGE,but it is returning an error message " Instance 4400000245 of object PurchaseOrder could not be changed ". Can anyone help us in solving this error.
    Can we use the bapi in the above user eixt or not.
    Regards,
    Suresh.

    I believe u r trying to chnge the PO when it is already being processed by MIGO transaction.
    Mayb dats y the error message.
    Try to change the Quantity using the BAPI in standalone mode through se37.
    Edited by: Kanwardeep Singh Gill on May 25, 2010 6:15 PM

  • Purchase requistion number not been generated for material shopping carts

    Dear Experts,
    I am able to create a purchase requistion for text shopping carts once it is approved. For material if i create a shopping cart then status is showing approved(activated workflow without approval) but purchase requistion number not been generated.
    It was happening suddenly...earlier i was able to generate PR for material shopping carts.
    Please advise on this
    Thanks
    Ravo

    Hi Venkatesh,
    Can you please give me the detail requirement. If you want generate a PR for catalogue items then you have to maintain the setting in SPRO_>srm->SRM SERVER->cross application basic settings-> define objects in backend systems...
    Thanks
    Ravi

  • Output Message for Purchase order not being created Automatically

    Hi all,
    I created a Condition type for Purchase order in MN04 with key combination "Doc.Type/Purch.Org/Vendor". The problem arises when i delete this condition record. After deletion when i create purchase order in me21n for that condition type, the system gives an error.
    Message no. 06261 - No message generated for output of purchasing document.
    Is there anyway the purchase order message is created automatically again when its condition type has been deleted from MN04.
    - Regards
    Sahar Khalid

    Before creating the entry in MN04 the message was being created automatically. I want the system to create the same output message as it was creating before the creation of the entry in MN04.

  • How do I create a new shopping cart in the SRM system (not portal)

    Hi,
    I'm working on a test landscape with Purchase request WF. I want to create a new shopping cart from the SAP system, not from the portal, and this purchase request should go to a manager approval.
    I've been told that I need a SRM system.
    Could you please tell me what the transaction for creating new shopping cart is? Could you also explain me what to do with this transaction or point to a doc I can learn from?
    Thanks

    it is called planned driven procurement scenario in SRM
    ECC box
    1. create a Purchase request
    2. Approve the Purchase request
    3. now check EPRTRANS table . you might have Purchase request number ( if you have already set up done in ECC system for Plan driven procurement)
    4. Run BBP_EXTREQ_TRANSFER job
    SRM Box..
    5. Now you can see your shopping cart for this purchase request (External requirement) in the sourcing cockpit.
    Muthu

  • Purchase requisitions are not created for Component by MRP

    Hi,
    I have created planned orders for assy. When I run the MRP the purchase requisitions are not created by  MRP for the components. If I check the planned order the components tab is showing all the raw materials list as per the BOM. The master data tab shows the BOM,Routing,Production version etc. But when I run the MRP the components planned orders/purchase requisitions are not created.  There is no stocks available for the components in the plant, still the purchase requisition are not created by MRP.
    I have tried in both transactions MD01 and MD02.
    I could notice one thing. Supoose if I enter 31.12.2009 is the order finish date, the system creates exception mesage 10- Rescheduling in with proposed date 01.12.2009.  Why the system is propsoing rescheduling in with date 01.12.2009 which past date.
    Please sugest.
    thanks and regards
    Murugesan

    Hi,
    I am using MRP type PD  for assy and components. There is no planned orders for assy.
    If I run MD02 the planned orders created for assy and purchase requisition are created for raw materials. But if I run MRP in MD01 neither  the planned orders nor the purchase requisitions created.
    I tried the Control keys NETCH,NEUPL but still the planned order and purchase requisitions are not created if I run using MD01.
    Please suggest.
    thanks and regards
    Murugesan

  • Purchase Order not subject to release strategy for contract rel. strategy

    Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
    So I have checked this release strategy with this codes:
    CL24N ok,
    CT04 ok,
    CL30N ok,
    CL20N ok,
    Release simulation in release strategy works,
    Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
    Thank you for your help in advance.

    I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
    I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
    Also compare your release strategy settings with many existing documents in SCN.
    Check your Classification should be like that.
    You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract.

Maybe you are looking for