Purchase order process for utilities, rent etc

Hi,
Could anyone explain me the purchase order process for rent, consultancy services, other facility sevices, insurance etc.
Thanks and regards
Aparna

http://www.sap-img.com/materials/account-assignment.htm

Similar Messages

Import standard Purchase Order process and interface tables

Hi all,
We are populating three PO interface tables from our custom developed application. PO_HEADERS_INTERFACE, PO_LINES_INTERFACE and PO_DISTRIBUTIONS_INTERFACE. We are using 11.5.10.2 version of Oracle Apps.
Initially we did not manage to populate the distributions interface table, but, now we are populating it. And after doing so, when we run the Import standard Purchase Order process for 'Approved' POs, the process_id for even the record which has correct distributions info also gets 'Rejected' as a value. The process is considering a mix of records : the approved POs that DO NOT HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE (which we had not managed to populate) and the approved POs that HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE.
does the Import standard Purchase Order process populate partial data that could be good or it rejects the whole lot of records?
Can anyone guide on this issue?
Thanks and kind regards,
Aparna
Edited by: Aparna on Jul 24, 2009 3:45 AM
Another piece of info I would like to share is
I have run the process for an approved PO with distributions info in PO_DISTRIBUTIONS_INTERFACE. This time no mixed data. In PO_INTERFACE_ERRORS table, an entry was found: for column name : PO_DISTRIBUTION_ID in ERROR_MESSAGE column 'Error: Has no distributions'.
Edited by: Aparna on Jul 24, 2009 8:03 AM
After carrying out number of tests, I have found out that
1) if the approval_status for the po is 'Approved' in the po_headers_interface table, it gives the above mentioned error and the process_id is 'rejected'.
2) if the approval_status for the po is 'Incomplete' in the po_headers_interface table, the process add the 'accepted' value for the process_id. But, the charge account number is not populated in shipments.
Edited by: Aparna on Jul 31, 2009 1:07 AM
There has been some progress on this issue. The process sees distributions data into the PO_DISTRIBUTIONS_INTERFACE table. Yet the following errors are found in the process log file:
Start dist default process
before getting period name
after getting period name
-->Intfc error occurred ...PO_PDOI_INVALID_GL_ENC_PER
before workflow
unit price = 18.5, rate = , unit price in functional currency = 18.5
after workflow
Start dist creation process
Start dist validation process
-->Intfc error occurred ...PO_PDOI_INVALID_BUDGET_ACCT
Start insert new record into po_distributions
Distribution ID: 252
dist num: 1
last updated by: 1189
po header id: 5283
po line id: 5878
line loc id: 5924
sob id: 21
cc id: 1560
qty ordered: 10
Req Header Ref num :
Req line Ref num :
Req dist id :
ROW ID: AAHUc1AFPAAAQ04AAC
call tax
Rollback for the Last Errored Line: 10
All Lines in error - Rolling back the header
We opened new GL periods for the calendar and yet same errrors are seen. Can anyone suggest any solution?
Kind regards,
Aparna

Hi
Do you have a copy of your insert statement?
regards

Purchase order processing status

Hi
I have a doubt regarding the purchase order processing status in the PO.
Chk table EKKO field PROCSTAT.
Can anyboby tell me the status sequence of a PO.
ie: when a PO will have the corresponding status
for ex if a PO is subject to release and if is released then the status will be 05 release completed.
Likewise need to know for other status particularly interrested in knowing status 08, 04 and 01.
Reg
Raja

>01 Version in process
when Version Management is activated and it is processed once then this indicator will come
>02 Active
after po creation or if the po is on hold this will be used
>03 In release
when the po is subjected to release and Release is Possible
>04 Partially released
when PO is Partly Released itemised release
>05 Release completed
release completed and now can be processed further
>08 Rejected
when the release of po is rejected or cancelled
regards
kunal

Framework/ Blanket Purchase Order Processing

Hello Experts!
Is there anyone here who can explain the entire blanket/ framework order processing for stock items (document type FO but item category is blank is this correct?) from purchase requisition to goods receiving. Also how will I process the succeeding deliveries? In what transaction can I generate the delivery schedule based on MRP run which I can send to the vendor? Please help on this.
Thanks in advance! =)

Hi,
I don't think it better option bcoz if you use item catagory blank then there will be no limit to the value which is main in the whole Blanket PO scenerio...
and after doing GR if there will be no value limit ..then the process will get improper...
The normal transaction for del schedule is me38...but with MRP...when you maintain the your agreement in the source list as a scource as well as MRP relevent then the system automatically does all next work if the source is found unique...
Hope it helps..
Other questions be updated subsiquently...
Regards,
Priyanka.P
AWARD IF HELPFULL
Edited by: Priyanka Paltanwale on Jul 24, 2008 11:42 AM

Serialized purchase orders processable in new transaction only

Hello All,
I have a program which uses BAPI_PO_RELEASE to release the blocked POs.
A job has been scheduled to execute this program.
In the job log, I get the following
Date       Time     Message text                                                                             Message class Message no. Message type
09.02.2011 01:03:59 Release effected with release code Z2                                                         ME           106          S
09.02.2011 01:03:59 Serialized purchase orders processable in new transaction only                 MEPO          130          S
09.02.2011 01:03:59 NB-Standard PO 4501932233 changed                                                          06           023          S
Though it mentions that the release is affected, the particular PO still remains blocked.
Also there is a success message, "Serialized purchase orders processable in new transaction only", can anyone help understand this message?
Regards,
Smita

Hi Xavier ,
Purchase orders :
Open and Completed only -- All PO in EKKO Table
Open Only -- Table EKPO for which Final Invoice Indicator(EREKZ) is not set
Completed Only -- Table EKPO for which Final Invoice Indicator(EREKZ) is set
Regards
Ramesh Ch

Re : Third-Party Order Processing for Subcontracting ( Enhancement Pack 5)

Hi,
In Third-Party Order Processing for subcontracting - Purchase orders for products that are finished by a subcontractor and sent straight to the end customer. PR created in Sales system are processed further in this scenario where you direct your SC Vendor to send the material to your customer.
Although its a standard third party scenario with sub contracting job involved in it.
There is not much information we have in SAP help. This is ECC6 Enhancement pack 5 feature.
If any one has worked on this, I need a process flow to understand this process.
Response is apprecited,
Regards,
Dipak
Edited by: Dipak Kumar on Apr 13, 2011 6:43 AM
Any idea is appreciated?

Hi,
Here you can treat this two procedures are diffrent
For Contractor
Create P.O >> send semifinish goods to vendor
For sales Point
Sales order >> PR >> PO >> Vendor invoice reciept >> Customer invoice Issue wrt order.

Report including open purchase order quantity for one storage location

Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
Alicia

hI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material.

Purchase order number for each postings with FBL3N

Hello
With tcode FBL3N, I need to get all the postings on expenses accounts. Additionally it is possible to get more information on the postings from the orginal paper invoice. It shall be also more convenient to get the purchase order number walk trhough SAP with it. Then is it possible to get the purchase order number for each postings with FBL3N?
thanks for inputs
sb

Hello,
Could you please add field BSEG-EBELN as a special field in FBL3N (from
menu path Settings -> Special fields).
Then, select the Purchase order field again from "Change Layout"
(Ctrl+F8). Now this field is available for display variants, it has the
technical name 1-U_EBELN and the description 'Purchase Document'.
The other field has the same description but as technical name
'1-EBELN'. When you create a display variant be aware that you select
1-U_EBELN and not 1-EBELN.
*******Please also refer to attached notes 215798 and 984305.
Best regards, Hana

Post order processing for sales document is not yet complete

hi,
sap gurus,
i am facing the error while saving the sales order and this ticket is unique and it is saying that
"post order processing for sales document is not yet complete".
please help me in this regard.
and it is blocking the order for further processing.
regards,
balajit

I dont think this is a standard error message. Some exit is applied for sale order to meet some requirements. You need to check with your ABAPer.
In fact, you can conclude yourself based on the error message number. If it starts with Z, then the above holds good.
thanks
G. Lakshmipathi

There is still a purchase order commitment for WBS

Hi All,
We need to close whole project while closing I am getting the attached error.
There is still a purchase order commitment for WBS
Additional Information or Comments: = I have checked and closed all purchases order commitment. But still the project shows the below error .
Edited by: nandhasapfi on Sep 22, 2011 10:52 AM

Hello,
This message is being output correctly as the AuC still has
values against it.
These values must be cleared before you can close the WBS element.
Please do a FUL settlement against the WBS element to clear
these values and then try to set the CLSD status again.
There are two ways to 'clean' the AuC, so that you can deactivate it
and close the wbs element:
1. Post a manual retirement of the AuC to clean it.
2. Create a new AuC and use it for all the differences in the final
settlement.
I hope this helps,
regards
Ray

I Need interactive report to list the purchase orders details for a vendor

I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

Restrict print out of Purchase order only for Production system

Hi,
I want to restrict print out of Purchase order only for Production system, don't want to take it in devep or quality.
is there any identifier to find the system is production or development.
can anyone tell me how to restrict it,
is there any function module, not based on client system.
Thanx in advance
Kesav

Hi Kesavarathinam Vaidyalingam ,
yes, I also use thomas' suggestion using
t000-cccategory = 'P'.
to determine productive client.
Just one small hint: I found this condition as true in a test system: The admin had done a system copy to create a fresh test client - but forgot (or did not see a good reason) to change t000-cccategory = 'P. to t000-cccategory = 'T'.
Regards,
Clemens

Individual 3RD Party Purchase Order Process Bisiness logic ?

Dear sd experts
i know I.P.O ( Individual 3RD Party Purchase Order Process)
But tell me Business process why Vendor will send stock to Company ( After Loading The stock ) Again company will receive The stock ( Unloading )
Again Company will send to customer ( Loading here )
So please tell me The business logic , my doubt Vendor will send stock Directly With out Transport charges & Loading charges
it is Doing like this Profit to all ( Vendor ,customer ,& Company also)
Please tell Me the exact business logic
Thanks a lot

Hi Kaustubh
The answer lies in how the sales order is closed and invoice is printed when the GR is done.
Please check if it is possible to update the invoice with the information you want to be printed on the Export doc and Packing slip.If this can be acheived then you print the information out of the invoice without using the delivery.
Hope this helps.
Thanks

Output error in purchase order 3000000002 for output medium PRN

Hello,
I got this error message:
'Output error in purchase order 3000000002 for output medium PRN'
Regards,
Lina

Hi
<b>Please go through this -></b>
To set Output type,check the foll path:
SPRO->supplier relationship management-> SRM Server->Cross application basic setting->set output action and output format
See the foll link for more details:
http://help.sap.com/saphelp_srm50/helpdata/en/91/41faf2c220e84c9002a4ae4cc1906a/frameset.htm
Look for BADI "BBP_SEND_MEDIUM_MODE ".
<b>Related notes:</b>
Note 1028388 - User settings for output medium is not saved.
Note 885593 - SRM 5.0 SP02: Incorrect output medium and change impossible
Do let me know.
Regards
- Atul

Required archive file to do purchase order processing project in oracle soa

hi,
im learning oracle soa 11g.i want to do purchase order processing project.but i cant find the pre-required archive files in net.can any one suggest where can i find this file

Hi,
Are you using Jdeveloper on a windows machine? If you are then this might be a useful tip.
Click Tools -> External Tools. It will prompt you to setup common tools. Let it do this. Now when you right click on your project you will get an Explore Directory option. I use this a lot when copying XSD’s between projects.
Once you have done this you need to click the refresh button in the Application Navigator to ensure the new files appear.
Robert

Purchase order process for utilities, rent etc

Similar Messages

Maybe you are looking for