Purchase Order Referances maintenace

Hi
Where we maintain that creation of purchase order referances ?
Is it possible to create purchase order with referance to info record ? So that after putting info recored number purchase order takes all the refernca data from info record.

Hi,
We do not maintain any entries like creating PO with reference to info record. Infact if info record is maintained for vendor material combination, then the system will pick this Info record while creating PO with same combination.
Thnx,
SG.

Similar Messages

Purchase request referring to a deleted purchase order

Hi,
I'm working at a release upgrade from 4.6 to ECC 6.0 and I'm facing the following issue.
I created a purchase order referring to a purchase request.
Although I've deleted the purchase order, its number is still displayed in the purchase request.
Instead in the previous release 4.6c, after having deleted the purchase order, its number disappeared.
Do you know how to solve this different behaviour?
Thanks!

Ciao Elisa,
If PO item was delete, system will update the PO qty in PR statistics with ZERO. And appear information to advise this item has been opened. But 'Processing stat' will still keep 'B' - Ordered.
For your reference, please also kindly review the note 493315
FAQ: Purchase requisition (general) -> question 1
~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~
1. You delete a purchase order item with reference to the purchase requisition. Why is the last purchase order in the purchase requisition not reset and why is processing status "B" not changed?
Answer:
See Note 65839.
"This is actually not an error. This is because checks for whether a purchase requisition has already been completed are always made on the basis of the quantity ordered. The processing status and the last purchase order are not used in this case.
Thus the processing status and the last purchase order are not reset, since it very often occurs that purchase requisitions are completed via several purchase orders - that is, they are partially ordered several times. In this case, it would even be completely incorrect to reset the status when deleting the last purchase order item, since the previous purchase order can still exist.
However, since the program no longer has this information, namely, which purchase order is the last active one, the processing status is left on "B" and the purchase order number is not corrected, because this could only cause "even more incorrect" statistics."
Regards,
Mauro

Purchase Order in reference to contract

Hi,
Does anyone know whether i can create purchase order in reference to purchase contract via BAPI? or any other methods?
Thanks

for reference see OSS note Note 80462 - Wrong conv.factor during GR for POrder/sched.agrmnt
The purchasing document must be created again!
If the purchase order refers to a contract, you must also create the contract again because the conversion factors from the contract are taken over into the purchase order.
The conversion factor itself cannot be changed in the purchasing document - even if no WE has yet been booked - since this may lead to inconsistencies in the inventory management or to price variances during the invoice verification.

Sales order items refers to different purchase order items

Hello SAP Experts,
I have a requirement where sales order items are referring to different purchase order items. For eg. Item 1 from SO exist in PO no. 11 where as item 2 from SO exist in PO 12. Transaction MIRO allows to post items belonging to different purchase orders, but we have to do invoice verification using IDOCs. In EDI process, it is taking PO number from the SO header and not from the SO items.
Can anyone suggest how to get PO number from the SO item and not from the SO header.
Thanks.

Not possible to create sales order with reference to PO.
but if to capture cost, you can consider adding cost to customer's invoice.
e.g.
SO -> PO -Inb/IR -> GR -> OB -> Inv(Add here)
to add in that invoice, its either manual or through automatic condition.

Purchase order with referance to Purchase requisition

Dear All,
This is the requirement of Purchase order creation with reference to Purchase requisition only at the same time this requirement need to control particular document type ( Ex: Standard purchase Order) only .Based on this other document types should not effect.
Please give me the proper solution for above.
Regards,
Krishna

Dear Krishna Raju,
There is no configuration for the Purchase order with reference to Purchase requistion..
We can customise the Purchase order with reference to Purchase Requistion through the funcational authorisations.
For this,
Define Functional Authorisations in the customizing for Purchasing, there we can unmark PO w/o reference allowed.
Functional Authorisation, like ''abc'' create with T.Code OMET
Assign ''abc'' to a Parameter ID ''def'' with the T.Code SU52
Mostly this Purchase order authorisations will be give BASIS consultants. Pls approch them for more clarity in this regard.
With regards,
B.Ravindranath

Excise Invoice is captured with another Purchase Order

Hi
We have a scenrio, transfer the material from debond plant to mfg plant after imported material in kept in Bonding area. STO po is raised to from imported plant to mfg plant with Imported duties as delivery costs.
Bill of entry is provided for all the materials as one. While capturing the excise amount at line item level is difficult so, captured at first line item level as total because material is Same (Material is Split valuated materials with 3 batches). First GR is done properly but next GR for 2nd and 3 rd line items are refered with earlier Bill of entry, system promprts the error message "Excise Invoice is captured with another Purchase Order".
Please do the needful.
Regards
Mohan

Hi,
Please be informed that for one a GR document wrt PO only one excise invoice can exist.
Ex PO-4500000010
GR no 5000000010
only one excise can exist and if the same excise invoice is reffered to another GR with the same PO system will throw an error message. Please let me know the exact business requirement in detail.
Naveen

Open Purchase Order table.

Hi
I want to prepare a report which should display open Purchase Order quantity according to latest delivery date.
I explain with a example.
Say a material has 3 Purchase Orders with delivery date as 1st June,15th June and 20th June.Then system should pick the Purchase Order with delivery date as 1st June and it should dislay the quantity which is yet to be delivered,means there is possibility that GR has already been done for some of the quantity.
To summarize the report should pick the latest Purchase Quantity and display the quantity yet to be delivered.Can anybody let me kow the Tables to be refered fro the same.
Regards
Vaibhav Mahajan

Hi Vaibhav
You can go to report by ME2N. Here you have multiple options for your reoport. In selection parameters you can put OPEN PO nad put the delievery date. There are many combinations available in this report.
Please let me know if it doesn't work.
Regards
SS

Invoice non deductible tax amount vs Purchase order

In the purchase order the tax amount is calculated item by item (ME21N). In the invoice (MIRO) when we select flag Calculate tax the system calculates the tax amount for the total of all the items. Because of this system behaviour in the invoice verification sometimes we obtain small differences.
These differences should not exist specially when we are using a non deductible tax that affects the material valuation with the goods receipt and has to be corrected in the moment of the invoice verification.
Why does the system have a different behaviour from the purchase order to the invoice?
What can be done?
Best regards

Dear Biju K
Whatever you mentioned about condition NAVS is there in system.
I am not adding tax code in PO, referring your earlier email I am asking that.
For adding other element I have not asked anything here, only to clarify your statement
You need to cross check why non-deductible tax amount needed in your PO with NAVS condition type and its purpose.
I explained this.
My question is simple that in one PO I am getting non-deductible tax but if I change vendor for the same material I am not getting non-deductible tax in condition tab ? I am not able to understand why its happened ? If one PO shows means there are chances that basic configuration is correct but may be somewhere something is wrong, I want to find out that. If you can throw some light on that its helpful for me.
regards
Nitin

Purchase order Revision and Releases

Hello All
Can any one tell me the keyfig for Purchase order Revisions and Releases.I am trying to built a report that has PO Revision count and PO Releases count.
Any help would be appreciated
Thanks

Hi,
PO release is a approval procedure. If a PO fulfills certain conditions (e.g. the total order value exceeds $10,000), it has to be approved (by the cost center manager, for instance) before it can be processed further. This process of approving is knows as release procedure.
PO revision refers to changes made to PO. If an existing PO is changed, the system can print an amended PO displaying the changes. The first change is printed as 'amendment no. 1", the second as 'amendment no. 2" and so on.
Hope this helps.

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Custom vendor,freight vendor in case of import purchase order

Hi all,
I make the purchase order for imported goods and provide the insurance vendor,custom vendor & clearing charges vendor in PO itself. But when i was go for MIRO for planned delivery cose system show me message as:
Different invoicing party 1000055 planned for del. costs item in PO
4500000280
    Message no. M8287
Diagnosis
    You entered an invoice for delivery costs.
    In a delivery costs item for purchase order 4500000280, the invoicing
    party is 1000055. You are now posting the invoice to 1000040. This can
    be for one of two reasons:
    o   You entered 4500000280 in the field Purchase order, and 1000040 in
        the field Invoicing party.
    o   You entered a multiple allocation. The first item refers to a
        purchase order with invoicing party 1000040. Another item refers to
        purchase order 4500000280. The system copies the invoicing party
        from the first delivery costs item to all items, in this case
Note:
The category of this message can be changed in Customizing for Invoice
Verification. This means that you can receive a message as an error
message even though it is defined as a warning message in the standard
system.
The following documentation deals with the case applicable to the
standard system only.
cedure
Check your entries and make any necessary corrections.
If you want to allow delivery costs with different invoicing parties to
be selected, change the system message to W in Customizing. To do this,
you work through the step Define Attributes of System Messages in the
Implementation Guide for Invoice Verification.
The message is set as an error message in the standard system. In this
case, the delivery costs are not selected.
regards,
dinesh

Import Vendor return is like re export from business point of view.
You can follow export sales process in sap.
What i suggest is for example if it is raw material you can create a bom with parent material as X-01,child material as Y what
you are returning to vendor.
Note: Create parent material as HALB with sales view & accounting view with valuation of raw material.
Do production goods receipt,it willl bring stock to parent material.
Create customer for vendor.
Adopt export sales process,create a sales order,delivery,billing,invoice,excise invoice,ARE1.
Note : Discuss with FI consultant/core team take care of accounting effects in billing.
Clear balances for customer or vendor using F-53 or F-58.
Note : You need to tell excise/submit documents telling it is not actual export.
or
If you opt for purchasing route,then there is lot of customs formalities to be completed & also need to pay duties taken credit,depends on value of goods if it is high, you can opt for import vendor returns or ask vendor for debit memo which will be adjusted with future purchases against same vendor
I also asked same question in forum, refer link for solution [ Import material - Vendor returned(Indian scenario) |Import material - Vendor returned(Indian scenario);

Error message while viewing Purchase order summary

Hi all,
we are in 11.5.10.2 , we are getting error message while viewing purchase order "Currency formatting cannot be performed without a currency code".
is it beacuse of currency not popluated in Purchase order?
Verified metalink note - 960504.1
Thanks
Kiran

Hi Kiran,
Verified metalink and other areas but could not get any appropriate solution.
I tried to reproduce the issue in various available environments...but no luck!
My guess would be the datafix/BUG that you have referred in the MOS note 960504.1
Please check with your DBA for this patch in test instance.
Thanks
-Arif.

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

Link vendor credit memo to purchase order.

Dear All,
I am posting one Vendor credit memo in (MIRO) with reference to Purchase Order but i am unavle to get the track of Purchse order from FI document and In PO also.
I checked relation ship Browser from FI document
And In Po history also i checked.
Please give some input on this.
Thanks,
Sekhar

Dear All,
Please give input how to track credit mmo aginst a particular PO.
I posted MIRO (credit Memo) referring to a PO but after posting iam unable to track this one.
Thanks,
Sekhar.

Inter-company with 'Free Item in Purchase Order'

Dear Expert,
In case inter-company, how to create billing document wiht including u2018free item purchase orderu2019. ?
My case is
1) Company A issue purchase order (both normal and free item)
2) Company B issue the delivery order by referring to PO (both normal and free item)
3) However, when company B issue the billing document, only normal goods is copy to billing document. Free item are completed status after good issues is completed and they do not come in inter-company billing.
Thank for any sharing

Both delivery type and item type are the same as normal items.
The messages from system.
8500000020 000000 The document is not relevant for billing
echnical data
   Tech. data details
    Client                                 800
    Group Number
    Sales Document Number                  8500000020
    Item Number of the SD Document         000000
    Schedule Line Number                   0016
    Counter in Control Tables              00
    Message Identification                 VF
    System Message Number                  016
    Output Type                            I
    Message Variable 01
    Message Variable 02
    Message Variable 03
    Message Variable 04
    Group Type                             F

Purchase Order Referances maintenace

Similar Messages

Maybe you are looking for