Pushing Office 2007 service packs through WSUS

Does WSUS download MS Office 2007 service packs for administrators to approve and push to workstations?
If so, how can you redownload it or see if it was approved as I cannot find it as being downloaded, approved, declined or unapproved when searching through the wsus server reporting.

Hi,
How did you define products and classifications? You need check product office 2007 and classification service pack.
Another way is to import it via Microsoft update catalog.
http://catalog.update.microsoft.com
Hope this helps.

Similar Messages

  • Detection Office 2010 Service Pack 2 - Slipstreamed Install and WSUS rebuild

    Hi,
    at a customer of us the WSUS infrastructure had some problems and after some investigation the WSUS infrastructure was built up from scratch. We do have one WSUS Server which syncs with Microsoft and two downstream servers. After rebuild the WSUS infrastructure
    we do see one issue:
    Many clients were deployed with Office 2010 SP2 slipstreamed. Now the WSUS tells us for the Office 2010 Service Pack 2 Update (KB2687455) that it is missing on the clients.
    Is this a normal behaviour or is there an issue with the WSUS detection of the Service Pack? How can I see which updates a client reports to WSUS as installed while connecting with the new WSUS Server? I've tried to figure that out within the WindowsUpdateLog.log
    file but without success.
    Any ideas are very appreciated.
    Peter Forster | MVP Virtual Machine 2002-2011 | Austria |

    but wouldn't that cause SP2 to install again (or even downloaded to the client?)
    Maybe.
    Probably.
    If the "SP2 slipstream" was incomplete, or additional Office modules were added post-image, then the service pack needs to be reapplied. The key here is understanding how Office 2010 SP2 is different from other Office service packs in history.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Word 2003 w/ Office 2007 compatibility pack crashes after writing PDF

    Writing PDF from Word 2003 SP3, all patched, using (most recently) Acrobat 7.1.0 has for some months crashed on my system after the PDF is written but just before the Acrobat window closes and control of Word is returned to the user. Word is hung so severely that it is not possible to close it with Task Manager. And, it happens every time, whether from a single-page document or a >300 page API document with extensive graphics, links etc.
    The generated PDF is complete and valid, but has not been closed, so at this point it cannot be accessed. No choice but to reboot, after which the PDF can be accessed and is just fine. Word shrapnel (temporary files) litter the folder because it never closed properly.
    Searching the net I could never find anything that sounded like my problem. It felt to me like a font issue. On a hunch, I uninstalled the Office 2007 compatibility pack (which comes with Vista fonts that I've never used), and along with it, several associated Office 2007 security updates and service pack 1 for the compatibility pack.
    Once again I can write PDF's without hanging Word. If I had nothing better to do with my time, I might try reinstalling the compatibility pack, its service pack and the updates one by one to see when (or if) the problem might return... but this has caused me enough grief so all I'm prepared to do is post this information in the hope that it might help someone else.
    BTW - I also use Solid Documents PDF Converter once in a blue moon to create Word docs from PDF files. It also has PDF generation capability, which I tried as a troubleshooting measure. Same result. Clearly this is nothing to do with Acrobat per se.
    Scott Willing
    QSound Labs, Inc.

    Sad to report that a few days later, the problem had returned, so my joy was short-lived. Now it's even more mysterious than ever. Why would uninstalling a compatibility pack provide *temporary* relief?
    Arrrrrg...

  • Office 2010 Service Pack 2 (SP2) installation failing with error code 0x80070643 and B56

    I've been trying to install Office 2010 service pack 2 (32 bit) multiple ways without success. I've tried getting it directly from Microsoft Update, downloading the full file from Microsoft and installing it, using WSUS to deploy to clients, and I've tried
    using LANDesk to deploy it. All methods are failing.
    I need a solution that doesn't involve touching each PC manually, as I have a feeling this error is going to occur on several hundred PC's in my organization. So far on a group of 15-20 test PC's, every one has failed. We have not had problems with any other
    Microsoft Updates before this one.
    When I try Microsoft Update, I receive the following error:
    Code B56  Windows Update encountered an unknown error.
    Below is the WindowsUpdate.log excerpt:
    2013-08-06 12:45:33:313 3952 dc4 Handler :::::::::::::
    2013-08-06 12:45:33:328 3952 dc4 Handler :: START ::  Handler: MSI Install
    2013-08-06 12:45:33:328 3952 dc4 Handler :::::::::
    2013-08-06 12:45:33:328 3952 dc4 Handler   : Updates to install = 7
    2013-08-06 12:45:33:328 3952 dc4 Handler Extracting MSP file stored in CAB officesuiteww-x-none.cab
    2013-08-06 12:45:43:671 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:43:671 3952 dc4 Handler Extracting MSP file stored in CAB proofing-en-us.cab
    2013-08-06 12:45:43:702 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:43:702 3952 dc4 Handler Extracting MSP file stored in CAB proof-fr-fr.cab
    2013-08-06 12:45:43:983 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:43:983 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64ww-x-none.cab
    2013-08-06 12:45:44:217 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:44:217 3952 dc4 Handler Extracting MSP file stored in CAB officesuitemui-en-us.cab
    2013-08-06 12:45:44:482 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:44:482 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64mui-en-us.cab
    2013-08-06 12:45:44:529 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:44:529 3952 dc4 Handler Extracting MSP file stored in CAB proof-en-us.cab
    2013-08-06 12:45:44:716 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
    2013-08-06 12:45:44:716 3952 dc4 Handler   : Batch installing 7 updates
    2013-08-06 12:45:46:417 3952 dc4 Handler List of MSPs in transaction:
    2013-08-06 12:45:46:417 3952 dc4 Handler   C:\Windows\SoftwareDistribution\Download\29f5035d168bf9e9d0369f84037ff787\img\officesuiteww-x-none.MSP
    2013-08-06 12:45:46:417 3952 dc4 Handler MSP final command line: DISABLESRCPROMPT=1 LOCALCACHESRCRES=0 NOLOCALCACHEROLLBACK=1 REBOOT=REALLYSUPPRESS MSIRESTARTMANAGERCONTROL=Disable
    2013-08-06 12:46:42:265  112 600 Report Uploading 2 events using cached cookie, reporting URL =
    http://wsus:8530/ReportingWebService/ReportingWebService.asmx
    2013-08-06 12:46:42:358  112 600 Report Reporter successfully uploaded 2 events.
    2013-08-06 12:47:52:012 3952 dc4 Handler MSP Error List:
    2013-08-06 12:47:52:012 3952 dc4 Handler 1: 2902 2: ixfAssemblyCopy
    2013-08-06 12:47:52:012 3952 dc4 Handler   : MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
    2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: First failure for update {365F23BF-5D31-4811-A197-29C2C0751961}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = InstallFiles
    2013-08-06 12:47:52:012  112 938 AU >>##  RESUMED  ## AU: Installing update [UpdateId = {9C5E43A3-3AE9-434D-B105-A9D7902D5F9F}]
    2013-08-06 12:47:52:012  112 938 AU   # WARNING: Install failed, error = 0x80070643 / 0x00000B56
    2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: Operation failed at update 0, Exit code = 0x8024200B
    2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::
    2013-08-06 12:47:52:012 3952 dc4 Handler ::  END  ::  Handler: MSI Install
    2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::::::
    2013-08-06 12:47:52:168  112 5c4 Agent *********
    2013-08-06 12:47:52:168  112 5c4 Agent **  END  **  Agent: Installing updates [CallerId = AutomaticUpdates]
    2013-08-06 12:47:52:168  112 5c4 Agent *************
    2013-08-06 12:47:52:168  112 938 AU Install call completed.
    2013-08-06 12:47:52:168  112 938 AU   # WARNING: Install call completed, reboot required = No, error = 0x00000000
    2013-08-06 12:47:52:168  112 938 AU #########
    2013-08-06 12:47:52:168  112 938 AU ##  END  ##  AU: Installing updates [CallId = {87C0C0A5-18CE-45A0-9376-989DCA9CACCA}]
    2013-08-06 12:47:52:168  112 938 AU #############

    I too have been unable to install the Office 2010 SP2 update on either a Win7 or a Win 8 system.  Researching the errors I got led me to discover the following:
    1. Many people are encountering errors during the SP2 installation. Some were able to get around it by downloading the self-installing package and bypassing Windows Update.  Some were able to get it installed by first doing a Repair on Office 210 itself
    first, and then installing SP2.  But many others have not been able to install it at all.
    2. Apparently a common and insurmountable issue that prevents SP2 from installing is the lack of the MSOCACHE directory.  This directory normally gets installed on a machine during the original install of Office, and contains all the install files used
    during the installation.  Apparently the idea behind creating MSOCACHE was to allow subsequent updates without requiring the user to have the original source CD available.
    The problem is that if MSOCACHE is deleted, which is an option many people choose, you can then no longer do any updates to Office.
    I am one of those people.
    I found a posting that described a way to recreate MSOCACHE from the source CD.  I did that, and the SP2 update actually got farther - it started to install stuff but then stopped and asked for a particular file.  I found the file on the CD and
    pointed the installer to it, but it said the file was not found and quit.  So my install still failed.
    The last response I got at the Microsoft Answers site was to wait until SP2 is debugged.  It's not clear to me this will ever happen, but we'll see.
    Birk Binnard http://www.birkbinnard.com

  • Cannot download Office 2013 Service Pack 1 (KB2850036)

    I'm using SCCM 2012 Config Manager.  I've created a software update date for Office 2013 - Service Pack 1.  It contains only 1 update, and that's the Office 2013 SP1 (KB2850036).
    The standalone installer for this KB is around 640MB, according to the following link.
    http://support.microsoft.com/kb/2817430/en-us
    When I choose to Download this update with SCCM, it starts the normal "Provisioning Update" process but sits at 0%.   The deployment package directory grows to 334 folders, 329 files taking 3,707,522,416 bytes on the hard drive, and then eventually
    throws the following error in SCCM.
    Error:  Service pack 1 for Microsoft Office 2013 (KB2850036) 32-Bit Edition.   Failed to download content id 16844655.  Invalid certificate signature.
    I've tried the download a couple of times, and I get the same thing.
    Any suggestions?

    WSUS does not use the stand-alone installer for any updates. For this update in specific, because I had a battle with it, there are something like 700 different files that are part of the update and something like 800GB of data - those are ballpark numbers
    based on my spotty memory; IOW, lots. Your best bet is just to right-click on the update itself and select download again.
    If that still doesn't work at all, you can click on the update and go to the content tab, you'll see all of the files listed. You can individually copy the URLs (using Ctrl+C) and download them manually if there are one or two that won't download.
    Jason | http://blog.configmgrftw.com

  • The Office 2007 compatibility pack is not installed.

    I have Office 2003 installed and get this msg when I try to publish:
    Task Comment Ref#
    Job Aid / Postprocessing document                    The Office 2007 compatibility pack is not installed.     1090976704
    Training Guide / Postprocessing document               The Office 2007 compatibility pack is not installed.     1090976704
    Instructor Manual / Postprocessing document The Office 2007 compatibility pack is not installed.     1090976704

    Hello,
    You will need to install the Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats, which can be downloaded here:
    http://www.microsoft.com/downloads/details.aspx?FamilyId=941b3470-3ae9-4aee-8f43-c6bb74cd1466&displaylang=en
    Best regards,
    Marc

  • How to add Microsoft Office 2007 Lang Pack

    Hi guys,
    One of my customer wants me to add Office 2007 Lang Pack to MDT 2013. As a newbie, I would like to know how to do it please ?
    Thank you for your help.
    Cheers,

    Hi guys,
    One of my customer wants me to add Office 2007 Lang Pack to MDT 2013. As a newbie, I would like to know how to do it please ?
    Thank you for your help.
    Cheers,
    Some guidance is here:
    http://technet.microsoft.com/en-us/library/dd162397(v=office.12).aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Compatibility between Exchange 2007 service packs

    Hi all, I have 5 servers Exchange:
    - 3 Servers CAS and HUB
    - 2 Servers Mailbox server in Microsoft Failover Cluster (MSCS)
    Domain Controllers are all
    Windows Server 2003 SP2
    The versions of Exchange 2007 SP1 servers are all:
    8.1 Build 240.6
    I have thought about installing SP3 and RU13 in all 5 servers for Exchange, but I'm going to install SP3 and RU13 on 2 servers CAS / HUB and the following week at the other CAS / HUB server.
    Finally, the following week in the two Mailbox Servers.
    Is there any problem if I miss 2 servers CAS / HUB with SP3 RU13 and the other CAS / HUB in SP1, this will only be for a few days?
    Is there any problem if I leave the servidors Mailbox Servers in SP1 while CAS / HUB are in SP3 RU13, this will only be for a few days?
    regards
    Microsoft Certified IT Professional Server Administrator

    Hi Yupikaiey.
    Only thing you should be concerned is if you have CAS-CAS proxy or the Mailbox Cluster part.
    Your current plan looks good. Just stay alert for any uncommon issues popping up, which would normally mean due to the difference.
    If you upgrade your servers in this order, you may avoid potential service interruptions.
    Details below:
    Version Constrains are more of between roles of 2007-2010-2013 and not between same version SPs or RUs.
    Exchange 2013 Server Role Architecture
    The Past: Exchange 2007 and Exchange 2010
    Our goal was to make these server roles autonomous units. Unfortunately, that goal did not materialize in either Exchange 2007 or Exchange 2010. The server roles were tightly coupled along four key dimensions:
    2.This also necessitated a tight versioning alignment – a down-level Hub Transport or Client Access shouldn’t communicate with a higher version Mailbox server; in some cases this was enforced (e.g., Exchange 2007 Hub Transport servers cannot deliver messages
    to Exchange 2010 Mailbox servers), but in other cases they were not (e.g., an Exchange 2010 SP1 Client Access server can render data from an Exchange 2010 SP2 Mailbox server).
    The versioning restriction also meant that you could not simply upgrade a single server role to take advantage of new functionality – you had to upgrade all of them.
    The Present: Exchange Server 2013
    If I upgrade the Mailbox server with a service pack or cumulative update, then for a given mailbox hosted on that server, all data rendering and content conversions for that mailbox will be local, thus removing version constraints and functionality issues
    that arose in previous releases.
    Exchange 2007 Servicing
    http://technet.microsoft.com/en-in/library/dd421853(v=exchg.80).aspx
    Deployment Order
    Our test infrastructure guarantees that Exchange hotfixes work across multiple server roles. The order in which you apply the update rollup to the servers is not important except if you are deploying CAS-CAS proxying. Because the update rollups are not segmented
    for different Exchange server roles or for specific file configurations, apply each update rollup package to all Exchange 2007 servers in your environment.
    If you have multiple Active Directory sites, and if you deploy a Client Access server in the proxy sites that do not face the Internet, you must
    apply the update rollup to the Internet-facing Client Access servers
    and to the non-Internet-facing Client Access servers in the proxy site simultaneously. For other Exchange 2007 configurations, we recommend that you
    apply the update rollup package to the Client Access servers before
    you apply it to servers that are running other Exchange 2007 server roles, such as the Mailbox server role, the Hub Transport server role, and the Edge Transport server role.
    Note:
    Applying service packs and update rollups to clustered Mailbox servers requires specific planning and application steps. For more information about how to apply service packs to Exchange 2007 clustered Mailbox servers, see
    Upgrading Clustered Mailbox Servers to Exchange 2007 SP1 or later. For more information about how to apply update rollups to Exchange 2007 clustered Mailbox servers, see
    Applying Exchange 2007 Update Rollups to Clustered Mailbox Servers.
    For Patching and compatibility between versions:
    Determine the service pack level of Exchange. 
    Update rollups are service pack dependent. For example, an Update Rollup 5 package is available for Exchange 2007 and for Exchange 2007 Service Pack 1. To determine the service pack level of Exchange, examine the
    ExchangeVersion property. For more information about how to view the
    ExchangeVersion property and about the build number that is associated with each Exchange version, see
    Exchange Server 2007: Platforms, Editions, and Versions.
    References:
    How to Install the Latest Service Pack or Update Rollup for Exchange 2007
    Exchange Server Updates: build numbers and release dates
    We are looking at doing the roll-up to SP3
    Coexistence of Exchange2007 SP1 and Exchange 2007 SP3
    Regards,
    Satyajit
    Please “Vote As Helpful”
    if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Error in Planning layout since Excel 2007 Service Pack 2

    Hi,
    since I updated Excel 2007 from Service Pack 1 to 2 I have a problem with the planning layouts in upspm.
    When I open a planning folder with an input layout with excel inplace, a second instance of excel is opening without a sheet.
    When I close this excel I can work with the layout.
    This bug is definite since SP2 in Excel 2007.
    Is there a solution for this?
    I'm using SAP GUI 7.10 Patch 5

    Hello Tobias,
    in fact, with SP2 Microsoft has changed when security checks are performed. More details can be found here:
    http://support.microsoft.com/?kbid=2009802
    There is also a SAP note 1425448 (that contains a link to the MSDN-Knowledge-Base). Technically in SAP Desktop Office Integration the SAPGUI is a container for Excel (inplace activation). You will get the same effect when you embed e.g. an Excel file with macros as an object in a word file. It is even worse in the latter case:
    - I get two VBA 'stop' pop ups with no information
    - Then I get the security warning pop-up (activate or deactivate the macros) -> activated
    - Then Excel opens, but deactivated, no document is disypled: Excel main window visible
    - Then one get a pop-up below the Excel window that claims that there is no Excel installed (?)
    - It is impossible to close Excel, the Excel process has to be deleted via task manager ...
    I hope that this MSDN article is not the final word about this issue.
    Regards,
    Gregor

  • OfficeJet 4315 no longer works after Win 7 and Office 2010 service packs applied

    I've used OfficeJet 4315 on a Toshiba Satellite with WinXP (SP3) and Office 2003 and been delighted with the printer.  I recently migrated to a brand-new Acer Aspire with Win 7 and Office 2010 (home & student ed.)  At first, the 4315 worked well--in fact, all I had to do was plug in the USB connection and the in-OS drivers installed automatically.  However, something has now caused the printer too be essentially useless!  I think it happened after I applied SP1 to Win 7 and/or the service pack to Office 2010.  I can no longer print Word files (.doc or .docx), Excel spread sheets (.xls or .xlsx), PDFs, Web pages, or even e-mails,  The only things I can print are .txt files or equivalent and .jpg files or equivalent.  I've tried deleting and reinstalling the printer (including deleting the drivers and reloading them from Windows Update).  I don't believe I should have to replace a perfectly good printer just to support Windows 7 and Office 2010.  I NEED HELP URGENTLY with this problem!  If anyone has any knowledge or ideas, I'd be forever in your debt.  (HP, I'd even pay to get the help I need on this one!!)  TIA.

    Hi,
    Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
    Did this issue occur with Office files?
    I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
    And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Is there a way to sync Pre-MS Exchange Server 2007 (Service Pack 1) Calendar?

    Hello all,
    I think my company must be using Pre-Microsoft Exchange Server 2007 with Service Pack 1 for our exchange server, because
    I can only set up company Exchange account on MS Entourage, not the new Outlook
    I can only set up the same exchange account only on iPad and iPhone (able to view in Mail, Calendar, Contacts & Reminders)
    But
    I am unable to use Lion's Mail, iCal and Address Book to see my Exchange account
    For the moment, I am not really concern about mail and addresses,
    but can I see my Exchange calendar on my desktop iCal? How do I set it up?
    I guess the most obvious and straight forward way, for now, is to view on my iPad :-)  But it is really funny that the iDevices are backward compatible but yet Lion OS cannot...
    Thanks and cheers.

    Hi,
    Yes it will work, it says enterprise because it works there as well.
    Thanks
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Mail Merge using HTML Office 2010 Service Pack 2 doesn't send

    I have a user who sends out mailings several times a week using a Microsoft Word Mailmerge.
    He recently had his physical PC upgraded and we gave him a computer with a fresh install of the same programs he had before.
    When the mail merge is accessed everything seems to work fine (selecting the excel list of addresses to send to, specifying the recipient list, and going to send the mail merge we select the e-mail address column as the To list and the format as HTML and
    select Send)
    Once the send button is pressed it shows the working mouse pointer icon temporarily and then nothing.
    I check outlook to see if the E-mails sent and there are none listed.
    This same process works on another user's computer just fine and will send out the e-mails.
    I have attempted the below troubleshooting steps:
    I verified that all updates/service packs are installed.
    I verified that the AV is listed as "Valid".
    I disabled the AV during a test send and it still did not work.
    I verified all the settings on both workstations to see if there are any differences and I was unable to find any.
    I rebuilt the Outlook Profile.
    I uninstalled and re-installed MS Outlook.
    I checked to ensure Outlook was the default e-mail program in Default Programs.
    I checked to see  that Word is the default HTML program in internet option settings.
    I checked to see if there was a 64 bit registry key in place that could cause problems and there has never been any 64 bit MS Office applications installed and so I did not find any.
    Plain Text mailmerge works with one caveat.
    I get an Outlook pop-up stating "A program is tryign to access e-mail address information stored in outlook. If this is unexpected, click Deny and verify your antivirus software is up-to-date. For more information about e-mail safety and how you might
    be able to avoid getting this warning click Help" (this pop-up happens for each message that is being sent so a 50 person mailmerge asks 50 times)
    And it shows a box where I can select Allow access for a specific time frame (10 minutes or less) and then 3 buttins "Allow" "Deny" and "Help"
    Clicking help bring me to MS Office help menu that didn't explain anything close to the problem I was having and did not "HELP"
    This is beginning to frustrate the user and I am running out of ideas to fix the problem. My next step was going to be attempt to re-install the OS at this point.
    Anyone have any ideas?
    Thanks,
    Whyitsme84

    The Mail Merge was created using a different computer/user.
    I have not attempted to create another mail merge from his account; I will try this and get back.
    I have compared the options/settings from that and another user as I stated above.
    Which registry keys would I import? I don't want to go importing keys and have it break something else.
    They are not any add-ins on either PC that are different from each other; and as I stated above I have tried starting it in safe mode.
    Anti-Virus is up to date; Also I even disabled the Anti-Virus to see if that changed anything, and it did not.
    I will try creating a new mail-merge to see if somehow it creates a settings somewhere that will allow it.

  • Office 2013 Service Pack 1 installation causes shim error in Windows 8.1 Enterprise

    On a clean install of Windows 8.1 Enterprise and Office 2013 I installed RSAT and everything works fine initially.  When I install the Office 2013 Server Pack 1 update (categorized as an "Important" update) I then get the following
    errors when attempting to open Server Manager:
    (I attempted to include an image of the error and a link to the KB article but it wouldn't allow that saying my account must be verified although there appears to be no way to actually verify my account.  The "Verify Your Account 13" thread
    doesn't help by the way.)
    ServerManager.exe - This application could not be started.  Do you want to view information about the issue?
    Which if I click Yes it takes me to the page for this KB article:
    KB2715633
    The KB page refers to three different SHIM errors.  The second two don’t apply to this scenario but the first seems to.  Unfortunately the info on this one is:
    “The app is not configured in a way that makes it possible to determine the appropriate version of the .NET Framework runtime.
    You can't fix the configuration problem yourself. Contact the app vendor to resolve the issue.”
    I've re-installed Windows twice and have been able to replicate the problem each time (Clean Win 8.1 install, Office 2013 install, RSAT, everything works, install Office 2013 SP1).
    It says in the KB to "Contact the app vendor".  In this case that would be Microsoft. 

    1. What is you install W 8.1 ENT + all important updates -> Office 2013 > Office 2013 SP1 > RSAT ?
    2. Make sure that .NET 3.51 and 4.51 are installed.
    3. Make sure that there is no coincidence with issues
    http://support.microsoft.com/kb/2817430
    4. Try to sesolve problem with Process Explorer and Process Monitor
    HTH
    Milos

  • Outlook web login screen not displaying correctly on Exchange 2007 service pack install

    Hello everyone,
    I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly.  The page looks white with some black X's (I think that's where the
    pictures/background images used to be).  We tried to restart the ISS service with no luck.  I would appreciate any help you guys can provide.
    Thanks,
    Brian Kourdou

    Hi,
    I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
    Please try the following steps to solve this issue.
    Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
    Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
    Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
    Remove it with this command
    Remove-OwaVirtualDirectory “owa (Default Web Site)”
    Now create it again with the following command
    New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
    Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • Exchange server 2007 Service Pack problems SBS 2008

    I am Running Exchange server 2007 on Small Business server 2008 (SBS 2008). I tried to install SP2 but it fails both windows update and manually. Can anyone first advise me what version I'm currently running?
    Help / about form Exchange Management Console displays:
    Version 08.01.0436.000
    And running repair on Exchange server from programs and features displays 2007 SP1 setup. So I believe SP2 to be next I have also ran SP3 but this fails.
    Here is the end lines from a log:
    [03/05/2014 08:54:13] [0] Setup will run the task 'uninstall-msipackage'
    [03/05/2014 08:54:13] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '24b2c164-de66-44fe-b468-a46d9d5e6b31' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''  
    [03/05/2014 08:54:13] [1] Beginning processing.
    [03/05/2014 08:54:13] [1] Property 'PackageName' is 'EXCHANGESERVER.msi'.
    [03/05/2014 08:54:13] [1] Removing MSI package with code '24b2c164-de66-44fe-b468-a46d9d5e6b31'.
    [03/05/2014 09:09:01] [1] [ERROR] Unexpected Error
    [03/05/2014 09:09:01] [1] [ERROR] Unable to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. Fatal error during installation. Error code is 1603. Last error reported by the .msi package is 'Could not open key: UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613.  
    Verify that you have sufficient access to that key, or contact your support personnel. '.
    [03/05/2014 09:09:01] [1] [ERROR] Fatal error during installation
    [03/05/2014 09:09:01] [1] Ending processing.
    [07/05/2014 19:45:17] [0] End of Setup
    There is a registry key to match this and The administrator account used for setup has access to it i believe??? What does this log mean?

    Hi,
    This error indicated that your account missed registry permissions on: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\ 7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613
    Please check whether you have permission. You can also check whether the key have permissions inherited from the Parent Key or not.
    After changing the permission, please run the setup again.
    Best Regards.

Maybe you are looking for