Put File of a large file through FTP not working correctly

I put a lot of large files to my web server through Dreamweaver, and when I get files larger than about 45 meg, the file is put fine to the server. But then Dreamweaver waits for a server responce to make sure it got the file. and after about 30 seconds or so, it says server timed out, and it starts over with the FTP, and the first thing it does on the start over is to delete the file.
The only wai I have been able to put my large files to the server, is to sit and wait for it to finish, and then cancel the check for if the file is there or not.
I have my FVT server timeout set to 300 seconds, but that does not help eihter. it still times out after about 30 seconds.
Is there a fix for this so I don't have to sit and watch my files being transfered to the server?

I changed it to passive PTF, but that did not help, sending a 90 Meg file did the same thing. What the problem is, is that the Dreamweaver FTP wants to verify that the file got there. and when you send that large of a file, the server wants to make sure it is a clean file, so it takes a while to put it to the correct location. And while the server is doing this, Dreamweaver says that there is no responce from the server, and causes a reconnect. and on the reconnect it starts over, and the first thing it does is to make sure the file is deleted. What it should do it verify that the file is there and the same date as the one you sent up there. That would eliminate this problem. I was hoping there was a setting in Dreamweaver that I could tell the FTP not to verify the send.
Are there any Dreamweaver developers that visit this forum. that could tell me how to bypas the verify on put. It seams silly to have a tool that costs this much that can not do a task that a free pice of software can do.

Similar Messages

Ftp not working correctly

For some reason my site is trying to completely reload every time I do an FTP upload. Since my site has about 1,000 static images that are used for research only the FTP process can take up to two hours when it should take only minutes. It is as if the Muse does not compare images to see if they have changed and need uploading.

1) When there's an update of Muse the code generation changes (for new features, bug fixes, workarounds for bugs in browser updates, performance improvements, etc.). The files of a website are interrelated, therefore most of the files will be regenerated and re-uploaded, since most will have been changed due to the code generation changes.
2) For the 2014.3 update the image compression was improved (esp. for PNG images). Therefore the images of your site are likely to have changed (to now be smaller files and thus faster page load times for site visitors) as a result of the update. Thus they're all being uploaded.
Once you've uploaded with a specific version of Muse and saved your .muse file following that upload, subsequent uploads should only be for the set of files impacted by whatever changes have been made since the previous upload.

My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

So now that you have repeated the same thing three times that doesn't make things any clearer at all.
You are copying files from where to where?
How are you attempting to copy files, software or click and drag?
Any other detail would be helpful.
Allan

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

1) Apple ID: All about Apple ID security questions
Torrifromny wrote:
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file ?
2) See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
3) Or Email Here > Apple Support iTunes Store Contact

How do I remove or delete files within a document folder? I have tried dragging the files to the trash and it does not work

How do I remove or delete files and image files within a document foler? I have tried dragging the files to the trash, but that is not working.

Right-click (or ctrl-click) on a file. If the "move to Trash" option is greyed out, select "get info" and read the permissions at the bottom of the info window.
Wat are they?
Do the same for the enclosing folder - what permissions does that have?

Canon file RAW CR2 and mac book pro not working ...?

Canon file RAW CR2 and mac book pro not working ...?
I'm using Digital photo professional software
and i'm using canon camer 5D mark2 and mac book pro 13inch last version
i'm trying to shooting directly by Digital photo professional, Remote shooting but the RAW file con't open by the software or mac preview but with photoshop Cs5 can open
is any one have the same issu ? and how fix it please
What i did :
- update camera RAW
- Update Mac software
- update Digital photo professional
Regards,,
Bandar

Dear all
is there any solution for that ?

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

Yes, any version of PSE qualifies for upgrade pricing, but if you're in the US you might want to consider running the trial for now and waiting for the black friday specials, when the full version will be a lot less than the adobe upgrade price.

HT1212 Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold hom

Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold home button to reset please help.

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

FTP connections through Finder not reporting correct file size

Hi,
I have a NAS that running as an FTP server. When I connect to it through Finder it reports the incorrect file size of 2.7GB (the real file size is 61GB)
Its an DMG image file so it obviously fails when I try to image a new IMAC.
FTP through windows reports the correct file size so rules out any problem on the NAS.
Any ideas anybody?
Many thanks.

Hi,
I have a NAS that running as an FTP server. When I connect to it through Finder it reports the incorrect file size of 2.7GB (the real file size is 61GB)
Its an DMG image file so it obviously fails when I try to image a new IMAC.
FTP through windows reports the correct file size so rules out any problem on the NAS.
Any ideas anybody?
Many thanks.

File Splitting for Large File processing in XI using EOIO QoS.

Hi
I am currently working on a scenario to split a large file (700MB) using sender file adapter "Recordset Structure" property (eg; Row, 5000). As the files are split and mapped, they are, appended to a destination file. In an example scenario a file of 700MB comes in (say with 20000 records) the destination file should have 20000 records.
To ensure no records are missed during the process through XI, EOIO, QoS is used. A trigger record is appended to the incoming file (trigger record structure is the same as the main payload recordset) using UNIX shellscript before it is read by the Sender file adapter.
XPATH conditions are evaluated in the receiver determination to eighther append the record to the main destination file or create a trigger file with only the trigger record in it.
Problem that we are faced is that the "Recordset Structure" (eg; Row, 5000) splits in the chunks of 5000 and when the remaining records of the main payload are less than 5000 (say 1300) those remaining 1300 lines get grouped up with the trigger record and written to the trigger file instead of the actual destination file.
For the sake of this forum I have a listed a sample scenario xml file representing the inbound file with the last record wih duns = "9999" as the trigger record that will be used to mark the end of the file after splitting and appending.
<?xml version="1.0" encoding="utf-8"?>
<ns:File xmlns:ns="somenamespace">
<Data>
     <Row>
          <Duns>"001001924"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001925"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001926"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001927"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001928"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001929"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"9999"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
</Data>
</ns:File>
In the sender file adapter I have for test purpose changed the "Recordset structure" set as "Row,5" for this sample xml inbound file above.
I have two XPATH expressions in the receiver determination to take the last record set with the Duns = "9999" and send it to the receiver (coominication channel) to create the trigger file.
In my test case the first 5 records get appended to the correct destination file. But the last two records (6th and 7th record get sent to the receiver channel that is only supposed to take the trigger record (last record with Duns = "9999").
Destination file: (This is were all the records with "Duns NE "9999") are supposed to get appended)
<?xml version="1.0" encoding="UTF-8"?>
<R3File>
     <R3Row>
          <Duns>"001001924"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</Extract_Code>
     </R3Row>
     <R3Row>
          <Duns>"001001925"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</Extract_Code>
     </R3Row>
     <R3Row>
          <Duns>"001001926"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</xtract_Code>
     </R3Row>
          <R3Row>
          <Duns>"001001927"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</Extract_Code>
     </R3Row>
          <R3Row>
          <Duns>"001001928"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</Extract_Code>
     </R3Row>
</R3File>
Trigger File:
<?xml version="1.0" encoding="UTF-8"?>
<R3File>
          <R3Row>
          <Duns>"001001929"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Ccr_Extract_Code>"A"</Ccr_Extract_Code>
     </R3Row>
          <R3Row>
          <Duns>"9999"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Ccr_Extract_Code>"A"</Ccr_Extract_Code>
     </R3Row>
</R3File>
I ve tested the XPATH condition in XML Spy and that works fine. My doubts are on the property "Recordset structure" set as "Row,5".
Any suggestions on this will be very helpful.
Thanks,
Mujtaba

Hi Debnilay,
We do have 64 bit architecture and still we have the file processing problem. Currently we are splitting the file into smaller chuncks and processsing. But we want to process as a whole file.
Thanks
Steve

File copy of large file fails.

I am trying to copy a large file, say "file.txt", from an external drive to my hard drive. The size of the file is 140 GB. I have tried twice, and both times the copy operation has stopped (after a couple of hours and 135 GB) with the message: "Operation cannot be completed. File already exists." The only file named file.txt that exists at that time is the partial one that was copied.
What's going on and how can I perform the file copy?
Thanks!

Can you tell me if the external drive (for any of the respondents) was NOT formatted with a Mac partition? Instead something like NTFS or FAT?
The file transfer failure issue is a recurrent frustration to a lot of users for many iterations of the Finder. Either through singular large file transfers or through multiple files (thousands) that in total are large in size.
I am speculating that the issue arises from files being transferred between storage locations of differing formats or in the case of internet based storage varying file translations. In part this speculation exists because I do not seem to experience this issue if the drives are all Mac OS Extended (Journaled).
Just looking to confirm your configuration.

Web Service to transmit a file (a very large file)

Greetings,
Is is possible to use a web service to transmit a file, sometimes a very large file? If so, what are the security implications of doing such a thing?
Thanks,
Charles

Quick answer: It depends... Did you try using Google to look-up examples of doing this? Here is a url to try: http://www.google.com/#sclient=psy&hl=en&source=hp&q=web+service+transfer+file&pbx=1&oq=web+service+transfer+file&aq=f&aqi=g1g-j3g-b1&aql=&gs_sm=e&gs_upl=1984731l1997518l0l1997874l25l19l0l1l1l0l304l3879l0.7.10.1l18l0&bav=on.2,or.r_gc.r_pw.&fp=7caaed5eb0414d97&biw=1280&bih=871
Thank you,
Tony Miller
Webster, TX
Never Surrender Dreams!
JMS
If this question is answered, please mark the thread as closed and assign points where earned..

File upload script not getting the file name for larger files

Hi
I have the following code (see extract below) and find that
when the size of the file to upload is larger than about 300kb the
code does not grab the file name. Consequently the upload fails.
The code works fine when the file size is smaller.
The code in the form page is:
<form
action="UploadAttachment.asp?SubjectName=<%=Request.QueryString("SubjectName")%>&VersionN umber=<%=Request.QueryString("VersionNumber")%>&QualificationName=<%=Request.QueryString(" QualificationName")%>"
method="post" enctype="multipart/form-data" name="form1">
<input name="file" type="file" size="100">
<input name="Upload" type="submit" id="Upload"
value="Upload">
</form>
The code in the UploadAttachment.asp page is:
<%
'Grab the file name
Dim objUpload, strPath, SQLString
Set objUpload = New clsUpload
'there is a problem that this next line doesn't grab the file
name if file is too large.
strFileName = objUpload.Fields("file").FileName
etc.
%>
If you have any idea how to resolve this I'd be grateful.
Neil

Hi
I have the following code (see extract below) and find that
when the size of the file to upload is larger than about 300kb the
code does not grab the file name. Consequently the upload fails.
The code works fine when the file size is smaller.
The code in the form page is:
<form
action="UploadAttachment.asp?SubjectName=<%=Request.QueryString("SubjectName")%>&VersionN umber=<%=Request.QueryString("VersionNumber")%>&QualificationName=<%=Request.QueryString(" QualificationName")%>"
method="post" enctype="multipart/form-data" name="form1">
<input name="file" type="file" size="100">
<input name="Upload" type="submit" id="Upload"
value="Upload">
</form>
The code in the UploadAttachment.asp page is:
<%
'Grab the file name
Dim objUpload, strPath, SQLString
Set objUpload = New clsUpload
'there is a problem that this next line doesn't grab the file
name if file is too large.
strFileName = objUpload.Fields("file").FileName
etc.
%>
If you have any idea how to resolve this I'd be grateful.
Neil

Bapi_document_create2 does not work correctly with attached file.

Hi all.
I hava a problem with bapi. I programmed below.
        ls_docdata-documenttype = 'BBS'.
        ls_docdata-description = 'JJW test'.
        ls_file-documenttype = 'BBS'.
        ls_file-ORIGINALTYPE = 1.
        ls_file-storagecategory = 'ZSTW_KPRO'.
        ls_file-wsapplication = 'TXT'.
        ls_file-docfile = entity_filename.
        append ls_file to lt_files.
        CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
          EXPORTING
            documentdata       = ls_docdata
            PF_FTP_DEST = 'SAPFTP'
            PF_HTTP_DEST = 'SAPHTTP'
          IMPORTING
            documenttype               =      lv_documenttype
            documentnumber           =     lv_documentnumber
            documentpart                =     lv_documentpart
            documentversion           =     lv_documentversion
            return                           =     ls_return
          tables
            documentfiles     = lt_files.
        call function 'BAPI_TRANSACTION_COMMIT'.
If I don't attach the file, DIR is created but if attach some files, it does not work. What should I do??
regards.

Hi,
You can use the below to attach the file from BSP to SAP. But it doesnt use the BAPI - 'BAPI_DOCUMENT_CREATE2'. It works perfectly for me. Let me know if you have any questions.
Note: This code put the file into SAP Directory "/userapps/master_data/" as well as it upload the file into Transaction WTY since i am using Business object:BUS2222. You may need to modify the Business object if you ahve the one, otherwise you can just put it into SAP DIR.
FUNCTION ZATTACH_CREATE.
*"*"Update function module:
*"*"Local interface:
*" IMPORTING
*"     VALUE(FILE) TYPE SAPB-SAPFILES
*"     VALUE(STR_FILE_CONTENT) TYPE XSTRING
*"     VALUE(OBJECT_KEY) TYPE BAPIBDS01-OBJKEY
DATA: LOGICAL_SYSTEM TYPE BAPIBDS01-LOG_SYSTEM,
        CLASSNAME TYPE BAPIBDS01-CLASSNAME,
        CLASSTYPE TYPE BAPIBDS01-CLASSTYPE.
DATA: IT_FILES TYPE TABLE OF BAPIFILES,
        IT_SIGNATURE TYPE TABLE OF BAPISIGNAT,
   FILES TYPE BAPIFILES,
SIGNATURE TYPE   BAPISIGNAT.
DATA: I_TOADD TYPE TOADD,
        FILENAME_ALL TYPE SAPB-SAPFILES,
        FILE_PATH TYPE SAPB-SAPFILES,
        FILE_PATH_MEMORY(250) TYPE C, " path für SAP memory
        FILE_PATH_LENGTH TYPE I,       " length of the file_path
       FILE_CONTENT_LENGTH TYPE I,       " length of the file_CONTENT
       FILE_NAME TYPE SAPB-SAPFILES,
        FILE_EXTENSION TYPE TOADD-DOC_TYPE.     " file-extension.
DATA: I_FILE_CONTENT TYPE TABLE OF BAPICONTEN.
DATA: WA_FILE_CONTENT TYPE BAPICONTEN,
   STRING_CONTENT TYPE STRING,
   STRING_CONTENT1 TYPE STRING.
DATA:
   I_FILES TYPE TABLE OF BAPIFILES ,
        I_SIGNATURE TYPE TABLE OF BAPISIGNAT ,
        I_COMPONENTS TYPE TABLE OF BAPICOMPON ,
       COMPONENTS TYPE BAPICOMPON ,
        I_PROPERTIES TYPE TABLE OF SDOKPROPTY ,
        I_PROPERTIES2 TYPE TABLE OF BAPIPROPER ,
        I_PROPERTIES_DEL TYPE TABLE OF BAPIDPROPT ,
       MIMETYPE TYPE TOADD-MIMETYPE,
COMPID TYPE BAPICOMPON-COMP_ID, " compid for popup
        COMPID_FLAG(1) TYPE C,           " compid can't be changed
        MODIFY_FLAG(1) TYPE C,           " document is modified
        ATTRI_FLAG(1) TYPE C,            " attri can't be changed
        TITLE_FLAG(1) TYPE C,            " titel of the popup
        CANCEL_FLAG(1) TYPE C,           " cancel button Yes/No
        BUTTON_TEXT(10) TYPE C,
        INFO_TEXT(100) TYPE C,
VERSION_NR TYPE BDN_CON-DOC_VER_NO,     " version_nr for popup
        VERSION_LANGU2 TYPE T002T-SPTXT, " language field in POPUP
        VERSION_LANGU TYPE BDN_CON-LANGU," SPRAS language field
        TITLE_TEXT(100) TYPE C,          " title of the popup
        DESCRIPTION TYPE BDN_CON-DESCRIPT.      " descr. for popup
*FILENAME_ALL = fileUpload_event->file_name.
* Transfering into SAP File server.
FILE_CONTENT_LENGTH = XSTRLEN( STR_FILE_CONTENT ).
FILENAME_ALL = FILE .
STRING_CONTENT = STR_FILE_CONTENT.
DATA: OUT_LINES TYPE TABLE OF XSTRING.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER                = STR_FILE_CONTENT
*   APPEND_TO_TABLE       = ' '
* IMPORTING
*   OUTPUT_LENGTH         =
    TABLES
      BINARY_TAB            = I_FILE_CONTENT.
DELETE DATASET '/userapps/master_data/claim1.txt'.
OPEN DATASET '/userapps/master_data/claim1.txt' FOR APPENDING
    IN TEXT MODE ENCODING DEFAULT.
* LOOP AT I_FILE_CONTENT INTO WA_FILE_CONTENT.
*    TRANSFER STR_FILE_CONTENT TO '/userapps/master_data/claim1.txt'.
TRANSFER STRING_CONTENT TO '/userapps/master_data/claim1.txt'.
* ENDLOOP.
CLOSE DATASET '/userapps/master_data/claim1.txt'.
OPEN DATASET '/userapps/master_data/claim1.txt' FOR INPUT
       IN TEXT MODE ENCODING DEFAULT.
READ DATASET '/userapps/master_data/claim1.txt' into STRING_CONTENT1.
* -- split filename                                                 -- *
    DATA: LENGTH TYPE I.
DATA: PATH2(1200). " LIKE sapb-sapfiles.
DATA: L_FILE(1200),
        L_DIR(1200),
        L_DELIMITER        TYPE C,
        L_OFFSET           TYPE I,
        L_BYTES            TYPE I,
        L_DELIMITER_OFFSET TYPE I,
        L_DELIMITER_BYTES TYPE I,
        L_CHAR             TYPE C,
        L_PREVIOUS_CHAR    TYPE C,
        L_LAST_CHAR        TYPE C.
PATH2 = FILENAME_ALL.
LENGTH = STRLEN( PATH2 ).
L_OFFSET = 0.
WHILE L_OFFSET < LENGTH.
    L_LAST_CHAR = L_CHAR. "remember last character
    L_BYTES = CHARLEN( PATH2+L_OFFSET ).
    L_CHAR = PATH2+L_OFFSET(L_BYTES). "get current character
    IF L_CHAR = '/' OR L_CHAR = '' OR L_CHAR = ':'.
      IF L_DELIMITER IS INITIAL OR L_DELIMITER = ':'.
        "Typically we deal with absolute paths, so the first
        "delimiter is best. This allows for UNIX paths with
        "'' in the directory or file name
        L_DELIMITER = L_CHAR.
      ENDIF.
      IF L_CHAR = L_DELIMITER.
        L_DELIMITER_OFFSET = L_OFFSET.
        L_DELIMITER_BYTES = L_BYTES.
        "remember character in front of delimiter:
        L_PREVIOUS_CHAR = L_LAST_CHAR.
      ENDIF.
    ENDIF.
    L_OFFSET = L_OFFSET + L_BYTES.
ENDWHILE.
IF NOT L_DELIMITER IS INITIAL.
    L_OFFSET = L_DELIMITER_OFFSET + L_DELIMITER_BYTES.
    L_FILE = PATH2+L_OFFSET.
    IF L_PREVIOUS_CHAR = ':' OR L_DELIMITER = ':'.
      "path ends with or after drive identifer, include the delimiter
      L_DIR = PATH2(L_OFFSET).
    ELSEIF NOT L_DELIMITER_OFFSET IS INITIAL.
      "do not include a trailing delimiter for compatibility reasons
      L_DIR = PATH2(L_DELIMITER_OFFSET).
    ELSE.
      CLEAR L_DIR.
    ENDIF.
ELSE.
    L_DIR = SPACE.
    L_FILE = PATH2.
ENDIF.
FILE_PATH = L_DIR.
FILE_NAME = L_FILE.
* -- set new file_path to SAP memory                                -- *
FILE_PATH_LENGTH = STRLEN( FILE_PATH ).
IF FILE_PATH <> SPACE AND FILE_PATH_LENGTH < 250.
    FILE_PATH_MEMORY = FILE_PATH.
    SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
ELSE.
    FILE_PATH_MEMORY = SPACE.
    SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
ENDIF.
* -- data declaration ------------------------------------------------ *
DATA:
        SINGLE_C TYPE C.
CLEAR: SINGLE_C.
LENGTH = STRLEN( FILE_NAME ).
IF LENGTH > 0.
    WHILE LENGTH > 0.
      SINGLE_C = FILE_NAME+LENGTH(1).
      IF SINGLE_C CO '.'.
        LENGTH = LENGTH + 1.
        EXIT.
      ELSE.
        LENGTH = LENGTH - 1.
      ENDIF.
    ENDWHILE.
    IF LENGTH > 0.
      FILE_EXTENSION = FILE_NAME+LENGTH.
    ELSE.
      FILE_EXTENSION = SPACE.
    ENDIF.
ELSE.
    FILE_EXTENSION = SPACE.
ENDIF.
IF FILE_EXTENSION <> SPACE.
    SET LOCALE LANGUAGE SY-LANGU.
    TRANSLATE FILE_EXTENSION TO UPPER CASE.              "#EC TRANSLANG
    SET LOCALE LANGUAGE SPACE.
ENDIF.
* TR001++
DATA: I_TOADV TYPE TABLE OF TOADV.
DATA: WA_TOADV TYPE TOADV.
DATA: OBJECT TYPE SAEOBJART.
SELECT * FROM TOADV INTO CORRESPONDING FIELDS OF TABLE
          I_TOADV WHERE STANDARD = 'X'.
DELETE I_TOADV WHERE AR_OBJECT CS 'BDS' OR AR_OBJECT CS 'ZSEST'.
READ TABLE I_TOADV INTO WA_TOADV WITH KEY DOC_TYPE = FILE_EXTENSION.
* -- get name and description for the document                      -- *
CLEAR: COMPID,
         DESCRIPTION,
         VERSION_NR,
         MODIFY_FLAG,
         COMPID_FLAG,
         ATTRI_FLAG,
         TITLE_FLAG.
COMPID_FLAG    = ' '.              " -> compid can't be changed
MODIFY_FLAG    = 'S'.              " -> popup in save modus
ATTRI_FLAG     = 'X'.              " -> attri's can be changed
COMPID         = FILE_NAME.
VERSION_NR     = '00000001'.
VERSION_LANGU2 = SY-LANGU.
TITLE_FLAG     = '1'.              " -> BDN
* -- get the mimetype of the docuclass                              -- *
*PERFORM MIMETYPE_GET(OAALL) USING FILE_EXTENSION
*                            CHANGING I_TOADD.
DATA: I_DOCUMENTCLASS TYPE TOADD-DOC_TYPE.
MOVE FILE_EXTENSION TO I_DOCUMENTCLASS.
SET LOCALE LANGUAGE SY-LANGU.
TRANSLATE I_DOCUMENTCLASS TO UPPER CASE.               "#EC TRANSLANG
SET LOCALE LANGUAGE SPACE.
SELECT SINGLE * FROM TOADD INTO I_TOADD WHERE
                             DOC_TYPE EQ I_DOCUMENTCLASS.
IF SY-SUBRC NE 0.                    " nothing found -> default!
    I_TOADD-DOC_TYPE = I_DOCUMENTCLASS.
    I_TOADD-MIMETYPE = 'application/x-docType'.             "#EC NOTEXT
ENDIF.
MOVE I_TOADD-MIMETYPE TO MIMETYPE.
* -- fill file and signature structure                              -- *
CLEAR: I_FILES, I_SIGNATURE.
REFRESH : I_FILES, I_SIGNATURE.
DESCRIPTION = FILE_NAME.
FILES-DOC_COUNT = 1.
FILES-DIRECTORY = FILE_PATH.
FILES-FILENAME = FILE_NAME.
FILES-MIMETYPE = MIMETYPE.
APPEND FILES TO I_FILES.
* -- fill components and signature structure                        -- *
COMPONENTS-DOC_COUNT = 1.
COMPONENTS-COMP_COUNT = 1.
COMPONENTS-MIMETYPE   = MIMETYPE.
COMPONENTS-COMP_ID         = FILE_NAME.
APPEND COMPONENTS TO I_COMPONENTS.
SIGNATURE-DOC_COUNT = 1.
SIGNATURE-PROP_NAME = 'BDS_DOCUMENTCLASS'.
SIGNATURE-PROP_VALUE = FILE_EXTENSION.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'BDS_CONTREP'.
*IF BDS_DOCTYPE_LIST-CONTREP = SPACE.
SIGNATURE-PROP_VALUE = ' '.                               "#EC NOTEXT
*ELSE.
* I_SIGNATURE-PROP_VALUE = BDS_DOCTYPE_LIST-CONTREP.
*ENDIF.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'BDS_DOCUMENTTYPE'.
SIGNATURE-PROP_VALUE = WA_TOADV-AR_OBJECT. "'ZSRVCXLS'."TR001+
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'DESCRIPTION'.
SIGNATURE-PROP_VALUE = DESCRIPTION.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'LANGUAGE'.
SIGNATURE-PROP_VALUE = VERSION_LANGU.
APPEND SIGNATURE TO I_SIGNATURE.
CALL FUNCTION 'BDS_BUSINESSDOCUMENT_CREA_TAB'
    EXPORTING
*   LOGICAL_SYSTEM        =
      CLASSNAME             = 'BUS2222' "classname_select
      CLASSTYPE             = 'BO'" classtype_select
    CLIENT                = SY-MANDT
      OBJECT_KEY            = OBJECT_KEY
    BINARY_FLAG           = 'X'
* IMPORTING
*   OBJECT_KEY            =
    TABLES
      SIGNATURE             = I_SIGNATURE
      COMPONENTS            = I_COMPONENTS
    CONTENT               = I_FILE_CONTENT
*   ASCII_CONTENT         =
* EXCEPTIONS
*   NOTHING_FOUND         = 1
*   PARAMETER_ERROR       = 2
*   NOT_ALLOWED           = 3
*   ERROR_KPRO            = 4
*   INTERNAL_ERROR        = 5
*   NOT_AUTHORIZED        = 6
*   OTHERS                = 7
COMMIT WORK AND WAIT.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFUNCTION.
Message was edited by:
        Raja T

Problems with compressing files with right hand click. it does not work.

Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

Thanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though!

Put File of a large file through FTP not working correctly

Similar Messages

Maybe you are looking for