PXE-E32 tftp error

Im getting the "PXE-32 error when i pxe boot a workstation. I am running
dhcp on a netware server, but zen pxe on linux box. I think it is not
seeing the tftp response file. I have option 60, 66, 67 specified
60 = PXEClient
66=10.205.0.22 (zen server)
67=/srv/tftp/boot/settings.txt
The settings file looks like the right one. Any help would be appreciated.
Thanks

If you have a separate DHCP and PDHCP (pxe) server you shouldn't use the
option 60
Ron
<[email protected]> wrote in message
news:QvqJf.1372$[email protected]..
> Im getting the "PXE-32 error when i pxe boot a workstation. I am running
> dhcp on a netware server, but zen pxe on linux box. I think it is not
> seeing the tftp response file. I have option 60, 66, 67 specified
> 60 = PXEClient
> 66=10.205.0.22 (zen server)
> 67=/srv/tftp/boot/settings.txt
> The settings file looks like the right one. Any help would be
> appreciated. Thanks
>

Similar Messages

PXE error = PXE-E32: TFTP open timeout

Hi Everyone,
I have a switched network using CISCO switches and also CISCO CNR(Cisco Network Register 6.1) acting as DHCP on my network. I modified the policies for the scope where my clients are connected using PXE to obtain the SCCM and WDS images and i'm having the following error
"PXE error = PXE-E32: TFTP open timeout"
The networking guy told me that the clients using DHCP never tries to connect to the TFTP server on my SCCM and WDS server that are running on a different box than the CNR 6.1.
Also i set the following parameters on my scope policy at the CNR 6.1 to the network segment where the clients are connected:
[011] resource-location-server                        <ip address of my WDS & SCCM server>
[067] boot-file                                                     <name of my .WIM image>
[066] tftp-server                                                  <FDQN of my WDS & SCCM server>
If there's more options to set in order to achieve the download of the images from the WDS & SCCM server?
Could someone help?
I'll appreciate your comments,
Cordially,
Oscar.

Hello,
I just accidentally dropped in, searching for the name of the bootfile, that was explained here as SMSBoot\x86\wdsnbp.com. What is important with PXE and tftp is to understand the process, which is actually quite simple. You pass the name of the bootserver and the boot filename bye one of two methods. It is either done through Proxy DHCP, which is implemented on your SCCM server. For this towork, you do not need any changes to your DHCP scope, but you have to add a DHCP helper (also called DHCP relay or BOOTP relay) to the router that you use for the CLIENT segment. The DHCP helper has to point to the WDS/SCCM server. Do not remove any DHCP helpers that are already in the TCP segment.
If this is not an option, you have to go the way that you currently are, and specify options 66 and 67, which point to the server and the bootloader (not the WIM-file) on your SCCM server. This has to be specified relative to the root path of the tftp service on your machine, so the value Kenneth suggested, SMSBoot\x86\wdsnbp.com seems correct. (I don't really know SCCM, but I really do know PXE :-) )
To test tftp:
1. From the client to the server: Download a tftp client (if you run Vista, it can be installed as a feature) and try to download the file. the command should be *similar* to "tftp get SMSBoot\x86\wdsnbp.com"
2. From the server to the client: Disable Microsoft's tftp server and install a freeware/shareware tftpserver that implements logging. Configure the tftp server to use the same directory that Microsoft's tftp server uses. Start tftp server and check the real-time log to see what is going on
Using these methods, you should normally find out quite explicitly what is wrong with your setup :-)
Regards,
Ole Kristian

SCCM 2012 - PXE-E32: TFTP Open timeout

Hi
When I trying deploy through PXE in the vmware workstation 10.0, I'm getting the error below
Error: PXE-E32: TFTP Open timeout
          TFTP....
The machine got the IP addresss and I'm stop in below error
Client MAc ADDR: 00 0C 29 6C 3F   GUID: xxxxxxxxxxxxxxx
Client IP : 192.168.100.15    MASK: 255.255.255.0   DHCP IP : 192.168.100.254
GATEWAY IP: 192.168.100.1     192.168.100.2
PXE-E32: TFTP Open timeout
TFTP....
Robert

Hi
I'm getting this error in the SMS PXE logs   " device is not in the database" and "device is in the database" . Even the device in the database I'm getting the same error
step that I did:
a. Manually Adding the Device the MAC
b. Manually Adding the Device the MAC and the GUID
c. Advertise in the "Uknown Computer" and Advsertise in the "TEST Collection" where I added the MAC address and gUID
Please find below the error
<![LOG[Begin validation of Certificate [Thumbprint 9733001C4F488EE84A86A2DC81479F7D3262A9C3] issued to '8d4012f3-7252-4e85-891a-b4ff4421a1e4']LOG]!><time="07:48:03.370-240" date="10-28-2013" component="SMSPXE" context=""
type="1" thread="5608" file="ccmcert.cpp:1245">
<![LOG[Completed validation of Certificate [Thumbprint 9733001C4F488EE84A86A2DC81479F7D3262A9C3] issued to '8d4012f3-7252-4e85-891a-b4ff4421a1e4']LOG]!><time="07:48:03.370-240" date="10-28-2013" component="SMSPXE" context=""
type="1" thread="5608" file="ccmcert.cpp:1386">
<![LOG[Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
]LOG]!><time="08:11:12.534-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100" file="libsmsmessaging.cpp:6363">
<![LOG[00:0C:29:6C:3F:1D, 08544D56-DCF7-D4D5-D1CC-409FCF6C3F1D: device is not in the database.]LOG]!><time="08:11:12.534-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100"
file="database.cpp:483">
<![LOG[Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777335" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
]LOG]!><time="08:20:49.266-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100" file="libsmsmessaging.cpp:6363">
<![LOG[00:15:B7:D2:86:F0, 80222D0B-0F4C-DC11-8052-B05987052608: device is in the database.]LOG]!><time="08:20:49.266-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100"
file="database.cpp:483">
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777335" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
]LOG]!><time="08:20:49.438-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100" file="libsmsmessaging.cpp:6561">
<![LOG[00:15:B7:D2:86:F0, 80222D0B-0F4C-DC11-8052-B05987052608: no advertisements found]LOG]!><time="08:20:49.438-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100"
file="database.cpp:483">
<![LOG[Begin validation of Certificate [Thumbprint 9733001C4F488EE84A86A2DC81479F7D3262A9C3] issued to '8d4012f3-7252-4e85-891a-b4ff4421a1e4']LOG]!><time="08:48:03.366-240" date="10-28-2013" component="SMSPXE" context=""
type="1" thread="7916" file="ccmcert.cpp:1245">
<![LOG[Completed validation of Certificate [Thumbprint 9733001C4F488EE84A86A2DC81479F7D3262A9C3] issued to '8d4012f3-7252-4e85-891a-b4ff4421a1e4']LOG]!><time="08:48:03.366-240" date="10-28-2013" component="SMSPXE" context=""
type="1" thread="7916" file="ccmcert.cpp:1386">
<![LOG[Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="16782654" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
]LOG]!><time="09:04:30.956-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100" file="libsmsmessaging.cpp:6363">
<![LOG[00:0C:29:6C:3F:1D, 08544D56-DCF7-D4D5-D1CC-409FCF6C3F1D: device is in the database.]LOG]!><time="09:04:30.956-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100"
file="database.cpp:483">
<![LOG[Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
]LOG]!><time="09:11:12.094-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100" file="libsmsmessaging.cpp:6363">
<![LOG[00:0C:29:06:F4:5C, 06494D56-AB1D-1748-BEC0-E4A5B906F45C: device is not in the database.]LOG]!><time="09:11:12.094-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100"
file="database.cpp:483">
<![LOG[Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="16782654" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
]LOG]!><time="09:11:23.420-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100" file="libsmsmessaging.cpp:6363">
<![LOG[00:0C:29:6C:3F:1D, 08544D56-DCF7-D4D5-D1CC-409FCF6C3F1D: device is in the database.]LOG]!><time="09:11:23.435-240" date="10-28-2013" component="SMSPXE" context="" type="1" thread="4100"
file="database.cpp:483">
Robert

PXE T01 file not found PXE E3B TFTP Error file not found error

Hi,
I was trying to deploy OS through SCCM . i have made DHCP server and SCCM PC one PCst when i am trying to boot from client to DHCP by f12 i am getting following error. so that i have been completed following steps
TFTP
PXE-T01: File not found
PXE:E3B: TFTP Error- File not found
1)Removed WDS service and reconfigured
2)PXE role removed and re assigned
3)renamed temp folder
4)DP updated
suppose if i am trying to access the port throgh telnet
i am getting
C:\Documents and Settings\Administrator>telnet 192.168.1.65 60
Connecting To 192.168.1.65...Could not open connection to the host, on port 60:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 67
Connecting To 192.168.1.65...Could not open connection to the host, on port 67:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 66
Connecting To 192.168.1.65...Could not open connection to the host, on port 66:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 65
Connecting To 192.168.1.65...Could not open connection to the host, on port 65:
Connect failed
SCCM PXEsetup.log
====================================================================
<05-17-2011 22:02:14> SMSPXE Setup Started....
<05-17-2011 22:02:14> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 22:02:14> Installing Pre Reqs for SMSPXE
<05-17-2011 22:02:14>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 22:02:14> Pre Req MSXML60 found.
<05-17-2011 22:02:14> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 22:02:14> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 22:02:14> Pre Req Wimgapi found.
<05-17-2011 22:02:14> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 22:02:14> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 22:02:14>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Installing the SMSPXE
<05-17-2011 22:02:14> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 22:02:14> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:02:35> ====================================================================
<05-17-2011 23:02:35> SMSPXE Setup Started....
<05-17-2011 23:02:35> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:02:35> Installing Pre Reqs for SMSPXE
<05-17-2011 23:02:35>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:02:35> Pre Req MSXML60 found.
<05-17-2011 23:02:35> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:02:35> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:02:35> Pre Req Wimgapi found.
<05-17-2011 23:02:35> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:02:35> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:02:35>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Installing the SMSPXE
<05-17-2011 23:02:35> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:02:35> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:38:26> ====================================================================
<05-17-2011 23:38:26> SMSPXE Setup Started....
<05-17-2011 23:38:26> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:38:26> Installing Pre Reqs for SMSPXE
<05-17-2011 23:38:26>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:38:26> Pre Req MSXML60 found.
<05-17-2011 23:38:26> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:38:26> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:38:26> Pre Req Wimgapi found.
<05-17-2011 23:38:26> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:38:26> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:38:26>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Installing the SMSPXE
<05-17-2011 23:38:26> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:38:26> WDS Service is installed.
<05-17-2011 23:38:26> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-17-2011 23:38:26> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-17-2011 23:38:26> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-17-2011 23:39:47> pxe.msi exited with return code: 0
<05-17-2011 23:39:47> Installation was successful.
<05-18-2011 22:20:04> ====================================================================
<05-18-2011 22:20:04> SMSPXE Setup Started....
<05-18-2011 22:20:04> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:20:04> Deinstalling the SMSPXE
<05-18-2011 22:20:04> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:20:04> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 22:20:15> SMSPXE deinstall exited with return code: 0
<05-18-2011 22:20:15> Deinstallation was successful.
<05-18-2011 22:20:15> Removing PXE Registry.
<05-18-2011 22:23:18> ====================================================================
<05-18-2011 22:23:18> SMSPXE Setup Started....
<05-18-2011 22:23:18> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:23:18> Installing Pre Reqs for SMSPXE
<05-18-2011 22:23:18>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:23:18> Pre Req MSXML60 found.
<05-18-2011 22:23:18> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:23:18> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:23:18> Pre Req Wimgapi found.
<05-18-2011 22:23:18> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:23:18> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:23:18>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Installing the SMSPXE
<05-18-2011 22:23:18> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:23:18> WDS Service is installed.
<05-18-2011 22:23:18> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-18-2011 22:23:18> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:23:18> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:24:11> pxe.msi exited with return code: 0
<05-18-2011 22:24:11> Installation was successful.
<05-18-2011 22:31:06> ====================================================================
<05-18-2011 22:31:06> SMSPXE Setup Started....
<05-18-2011 22:31:06> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:31:06> Installing Pre Reqs for SMSPXE
<05-18-2011 22:31:06>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:31:06> Pre Req MSXML60 found.
<05-18-2011 22:31:06> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:31:06> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:31:06> Pre Req Wimgapi found.
<05-18-2011 22:31:06> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:31:06> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:31:06>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Installing the SMSPXE
<05-18-2011 22:31:06> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:31:06> WDS Service is installed.
<05-18-2011 22:31:06> SMSPXE already installed (Product Code: {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}). Upgrading/Reinstalling SMSPXE
<05-18-2011 22:31:06> New SMSPXE is the same product code. This is a minor upgrade.
<05-18-2011 22:31:06> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:31:06> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:35:43> pxe.msi exited with return code: 0
<05-18-2011 22:35:43> Installation was successful.
<05-18-2011 23:41:19> ====================================================================
<05-18-2011 23:41:19> SMSPXE Setup Started....
<05-18-2011 23:41:19> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 23:41:19> Deinstalling the SMSPXE
<05-18-2011 23:41:19> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 23:41:19> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 23:41:33> SMSPXE deinstall exited with return code: 0
<05-18-2011 23:41:33> Deinstallation was successful.
<05-18-2011 23:41:33> Removing PXE Registry.
<05-19-2011 00:38:50> ====================================================================
<05-19-2011 00:38:50> SMSPXE Setup Started....
<05-19-2011 00:38:50> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-19-2011 00:38:50> Installing Pre Reqs for SMSPXE
<05-19-2011 00:38:50>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Found 2 Pre Reqs for Role SMSPXE
<05-19-2011 00:38:50> Pre Req MSXML60 found.
<05-19-2011 00:38:50> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-19-2011 00:38:50> Pre Req MSXML60 is already installed. Skipping it.
<05-19-2011 00:38:50> Pre Req Wimgapi found.
<05-19-2011 00:38:50> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-19-2011 00:38:50> Pre Req Wimgapi is already installed. Skipping it.
<05-19-2011 00:38:50>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Installing the SMSPXE
<05-19-2011 00:38:50> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-19-2011 00:38:50> WDS Service is installed.
<05-19-2011 00:38:50> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-19-2011 00:38:50> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-19-2011 00:38:50> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-19-2011 00:39:15> pxe.msi exited with return code: 0
<05-19-2011 00:39:15> Installation was successful.

I have similar issue same above error but this error i am getting intermittent keeping trying 2 or 3 times i get F12 option to boot the network services
TFTP
PXE-T01 The specified file not found
PXE-E3B TFTP Error : File not found
Our environment have DHCP configured In Inflobox and the Primary site server and PXE DP server located in Same Subnet and configured 2008 R2 sp1 and configured SCCM2012 in VM environment
I tried all the Options uninstall and re-install no luck and i have tried to increase Tramsmiit and recive Buffer size in lan card but the issue is not resolved.
Capture smspxe log when it found boot image the pxe working ,when it not found getting TFTP error.
SMSPxe log says no errors but getting client Pxe TFTP error file not found (Since its not looking Image throw out TFTP error)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://XXX.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
Set media certificate in transport
Set authenticator in transport
SMSPxe log says no errors t i can able to do pxe Log found Boot image
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://xxx.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
PXE::CBootImageManager::FindBootImage: SGP00004
Looking for bootImage SGP00004
PXE::CBootImageCache::FindImage
PXE::CBootImageInfo::UpdateAccessTime
Appreciate if you could provide some solution
Ksrini

SCCM 2012R2 osd pxe-e32 tftp open timeout

I have SCCM 2012 R2 standalone primary site on windows server 2012 and i have Cisco dhcp server i configured the distribution point for pxe boot to
work with osd i added boot images and configured them and the network guy configured the next server option to point to sccm server on the dhcp and the pxe boot fails we tried option 66 it fails also then we tried option 67 and it fails again we always get
the same error message pxe-32 : tftp open timeout.
option 67 SMSBoot\x86\wdsnbp.com,
and the 66 the ip of the sccm server

================= PXE Provider loaded. =====================
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Machine is running Windows Longhorn. (NTVersion=0X602, ServicePack=0)
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
MAC Ignore List Filename in registry is empty
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Begin validation of Certificate [Thumbprint FA4174562457D153C43E3D98299DDEB1CFEC59DC] issued to '0a73979c-2e12-4111-b880-1eee6cf2ef91'
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Completed validation of Certificate [Thumbprint FA4174562457D153C43E3D98299DDEB1CFEC59DC] issued to '0a73979c-2e12-4111-b880-1eee6cf2ef91'
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Initializing PXEPerfObject. SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
HTTP is selected for Client. The current state is 0.
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
Adding PR100002.4 SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
Adding PR100005.5 SMSPXE
3/17/2015 1:01:31 PM 6448 (0x1930)
Adding PR100022.7 SMSPXE
3/17/2015 1:01:35 PM 6448 (0x1930)
Adding PR100023.6 SMSPXE
3/17/2015 1:01:42 PM 6448 (0x1930)
Adding PR100028.3 SMSPXE
3/17/2015 1:01:49 PM 6448 (0x1930)
Found new image PR100002 SMSPXE
3/17/2015 1:01:53 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:53 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
SMSPXE 3/17/2015 1:01:53 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
PackageID: PR100002
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:53 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
SMSPXE 3/17/2015 1:01:53 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Failed adding image C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.53.01.{CC5749B0-CB0F-42A8-989E-A22A66E5E783}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.53.01.{CC5749B0-CB0F-42A8-989E-A22A66E5E783}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Found new image PR100005 SMSPXE
3/17/2015 1:01:54 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
PackageID: PR100005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:54 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.54.02.{BA52147D-AED6-476C-AA0B-576C47A3D075}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.54.02.{BA52147D-AED6-476C-AA0B-576C47A3D075}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Found new image PR100022 SMSPXE
3/17/2015 1:01:55 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
PackageID: PR100022
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:55 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Failed adding image C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.55.03.{8256887E-013C-4D4A-9644-68C821493E75}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.55.03.{8256887E-013C-4D4A-9644-68C821493E75}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Found new image PR100023 SMSPXE
3/17/2015 1:01:55 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
PackageID: PR100023
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:55 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Failed adding image C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.55.04.{886544D5-02B4-4B65-9753-534946E3C3AD}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.55.04.{886544D5-02B4-4B65-9753-534946E3C3AD}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Found new image PR100028 SMSPXE
3/17/2015 1:01:56 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim
PackageID: PR100028
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:56 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
Failed adding image C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.56.05.{9F037EC7-2A5E-4662-B7E9-94C993D11251}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.56.05.{9F037EC7-2A5E-4662-B7E9-94C993D11251}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
Found new image PR100002 SMSPXE
3/17/2015 1:01:57 PM 5960 (0x1748)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Opening image file C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Found Image file: C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
PackageID: PR100002
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:57 PM 5960 (0x1748)
Closing image file C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Begin validation of Certificate [Thumbprint FA4174562457D153C43E3D98299DDEB1CFEC59DC] issued to '0a73979c-2e12-4111-b880-1eee6cf2ef91'
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
Completed validation of Certificate [Thumbprint FA4174562457D153C43E3D98299DDEB1CFEC59DC] issued to '0a73979c-2e12-4111-b880-1eee6cf2ef91'
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
PXE Provider finished loading. SMSPXE
3/17/2015 1:01:57 PM 6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Failed adding image C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.57.06.{9BB909FC-0E10-456D-95C7-C81FA46A3806}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.57.06.{9BB909FC-0E10-456D-95C7-C81FA46A3806}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Found new image PR100005 SMSPXE
3/17/2015 1:01:57 PM 5960 (0x1748)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Opening image file C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Found Image file: C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
PackageID: PR100005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:57 PM 5960 (0x1748)
Closing image file C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Failed adding image C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.57.07.{326D786F-BB78-4BED-9557-9A3CA5BAEA9F}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.57.07.{326D786F-BB78-4BED-9557-9A3CA5BAEA9F}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Found new image PR100022 SMSPXE
3/17/2015 1:01:58 PM 5960 (0x1748)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Opening image file C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Found Image file: C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
PackageID: PR100022
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:58 PM 5960 (0x1748)
Closing image file C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\pxeboot.com' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\pxeboot.n12' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\bootmgr.exe' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\wdsnbp.com' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\abortpxe.com' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\abortpxe.com' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\wdsmgfw.efi' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\EFI\bootmgfw.efi' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\Fonts\segmono_boot.ttf' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\Fonts\segoe_slboot.ttf' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\Fonts\segoen_slboot.ttf' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\Fonts\wgl4_boot.ttf' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Found new image PR100023 SMSPXE
3/17/2015 1:01:59 PM 5960 (0x1748)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Opening image file C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Found Image file: C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
PackageID: PR100023
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:59 PM 5960 (0x1748)
Closing image file C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SM
AYehia

Distribution point, a TFTP error message

Hello,
I have a problem when I tried to migrate
a computer via PXE Network in an Annex or
there is a distribution point, a TFTP
error message appears as follows:
PXE-E32: TFTP
open timeout.
TFTP.
knowing that this problem does not arise
at the main site.
please help me and thank you in advance.
cdt.
Rayo_Muchacho

As Torsten mentionned, review the requirements for PXE boot.
http://prajwaldesai.com/boot-images-distribution-point-configuration-osd-sccm-2012-r2/
http://gerryhampsoncm.blogspot.ca/2013/02/sccm-2012-sp1-step-by-step-guide-part_9487.html
Benoit Lecours | Blog: System Center Dudes

Solaris 10 x86 Jumpstart TFTP error not defined!!!!

I have a solaris 10 jumpstart sparc that does all x86 installs. Until now it has been working fine. I now have to jumpstart two new clients a sun X4200 and an X2100. However I cannot get past the loading of the miniroot. It finds the menu.lst.MACRONAME ok, I see the Solaris 10 jumpstart title and then all I see is a number of dots appearing on the client screen and then nothing.
From the snoop I only get TFTP Error: Not Defined. I have logged a call with Sun but no luck there as yet! Does anyone have any ideas?
Many thanks in advance
Sofia
Message was edited by:
sofiahaaken

Yes, the current x86 miniroot from sol 10 06/06 does not contain all the necessary drivers for the X2100 which is an amd64. So it is either unpacking the miniroot and repacking it with the appropriate drivers that are contained in the SUNWnge package or do the manual install and then add them from the supplementary cd that contains these specific drivers. SUN has recorded the incident and they will fix it with the next releases I have been told.

TFTP:Error:not defined

I have a sol10 jumpstart server for x86 sol10 clients. It has been working find until now. I now have two clients an X4200 and an X2100 to jumpstart but I get the following main error after it reads the menu.lst and before it loads the miniroot:
dhcpclient01 -> jstartx86 TFTP Error: not defined^
Any ideas?
Many thanks in advance
Sofia
The snoop output follows
jstartx86 -> lntrs237 TELNET R port=52667 dhcpclient01 -> jsta^M
lntrs237 -> jstartx86 TELNET C port=52667 ^M
jstartx86 -> dhcpclient01 TFTP Data block 78 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 78^M
jstartx86 -> dhcpclient01 TFTP Data block 79 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 79^M
jstartx86 -> dhcpclient01 TFTP Data block 80 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 80^M
jstartx86 -> dhcpclient01 TFTP Data block 81 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 81^M
jstartx86 -> dhcpclient01 TFTP Data block 82 (1376 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 82^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2072 S=38112 LEN=20^M
dhcpclient01 -> jstartx86 TFTP Error: not defined^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2073 S=38113 LEN=23^M
dhcpclient01 -> jstartx86 TFTP Ack block 0^M
jstartx86 -> dhcpclient01 TFTP Data block 1 (412 bytes) (last block)^M
dhcpclient01 -> jstartx86 TFTP Ack block 1^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2074 S=38114 LEN=20^M
dhcpclient01 -> jstartx86 TFTP Error: not defined^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2075 S=38115 LEN=23^M
dhcpclient01 -> jstartx86 TFTP Ack block 0^M
jstartx86 -> dhcpclient01 TFTP Data block 1 (412 bytes) (last block)^M

Yes, the current x86 miniroot from sol 10 06/06 does not contain all the necessary drivers for the X2100 which is an amd64. So it is either unpacking the miniroot and repacking it with the appropriate drivers that are contained in the SUNWnge package or do the manual install and then add them from the supplementary cd that contains these specific drivers. SUN has recorded the incident and they will fix it with the next releases I have been told.

What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)

Wds pxe boot - tftp download loop - 4 times F12

Hi
I just set up a new wds server 2012
When trying to pxe boot a client, it loops like this:
Downloaded WDSNBP from...
WDSNBP started using DHCP referral.
Contacting server...
Architecture...
Contacting server...
TFTP download: boot\x86\wdsnbp.com
Downloaded WDSNBP from ...
Architecture...
Contacting Server...
TFTP download: boot\x86\wdsnbp.com
Then it goes on 4 times in a row:
"TFTP Download: Boot\x86\wdsnbp.com"
With Option "Require the user to press the F12 key..." enabled,
I have to press F12 4 times, which is 3 times too many.After the x-th download of wdsnbp.com the client continues the boot process
normally and the rest works fine.
Any help is greatly appreciated.
Michael

We are experiencing the same thing.
This started after enabling scope option 67 to solve this error: PXE-E53: No Boot filename received.
This only occurs on selected machines. We do employ IP Helpers and are thinking this could be an issue.

Can't boot HDD. "PXE-M0F: Exiting Intel PXE ROM." Error

Hello, and thank you in advance for your help.
My Toshiba Satellite U840 is receiving the following error at startup:
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
I had a Hitachi HTS545050B9A300 (S1) Hard drive which no longer worked (DIsk was making a click, and S.M.A.R.T. said it was bad)
So far I have gotten into setup by holding f2 at startup. The boot tab reads:
1. HDD/SSD (Seagate) ST500LT012-9WS142 (S1) (It's a brand new disk I bought)
2. USB
3. LAN Atheros Boot Agent
I have also tried disconnecting the battery and harddrive and then reconnecting them, it doesn't work. I've tried connecting to the internet directly with a cable and it gives me a DHCP error. At the beginnning, the HDD appeared on the list of hard drives to install Windows 7. It gave a "hardware error" at the end and it didn't let me install it. Then, it asked me to place a RAID 1 disk pressing Ctrl+I with a 30 GB hard drive, and now all I can see is that 30 GB hard drive but I can't even install it there.
I've tried with Hiren's disk. The mini Windows XP doesn't show the HDD. The linux distro does, but when I want to see the partitions, it gives an error on Linux on the whole screen with a bunch of words and it just stays there.

What is the full model and operating system?
What are the Bios settings?
Are you using recovery media or a stand alone install of windows 7 ?
If you are changeing to windows 7 from windows 8 there are Bios changes that need to be done before it will let you boot and it will give you this error.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

ASA firmware upgrade from console - tftp error

Have an asa 5510, trying to upgrade the firmware via console.
I have a tftp program installed on my PC but get an error running the command, any idea what I'm doing wrong?
asa# copy tftp flash
Address or name of remote host [142.xx.xx.xx]? ------------> IP of my PC
Source filename [asa912-k8.bin]?
Destination filename [asa912-k8.bin]?
Accessing tftp://142.xx.xx.xx/asa912-k8.bin...
%Error opening tftp://142.xx.xx.xx/asa912-k8.bin (No such device)

Hi,
You really cant upload files through the Console connection. Its not a network connection.
Your PC might have an IP address configured but that would be configured in its network interface card which has nothing to do with the console cable connection.
So you will have to configure one of the ASAs network interfaces with IP address and other basic settings. Then you need to configure the PCs network interface cards settings to match the IP address/subnet configured on the ASA. Then you will have an connection between the ASA and the PC and should be able to load the software to ASA.
For example
interface Management0/0
nameif management
security-level 100
ip address 10.10.10.1 255.255.255.0
no shutdown
and the configure the PC with IP address 10.10.10.100 and mask 255.255.255.0 for example and then load the software from the PCs IP address of 10.10.10.100.
- Jouni

TFTP error code 6

Hi
We are getting this bizzar error messages accross the board 30 plus routers and message time stamp is the same for all the routers meaning we get this error message around 17:55 in the evening. Cant seems to find any answer please help.
FYI..we are not trying to connect to TFTP at all. Here is the error message from one of the router.
TFTP: erroe code 6 received - 18025
Thanks

Thanks for the reply. Sorry since I am new to cisco discission I may have made a mistake posting as a OnePlus. The answer to your question is NO onePlus is not showing this message. We are do some monitoring tools we use here and this error message has been reported by all these devices and I have double checked in router to see the log and it shows the same message. If you can point me to right direction I would really appreciate.
Thanks

A question on Solaris 10 PXE boot, add_install_client error

Hello,
I am learning how to do network boot for x86 systems. I follow the Solaris 10 8/07 Installation Guide: Network Based Installation.
I would like to start from a simpler system, ie. client and install server are on the same subnet, thus, I don't need to configure a DHCP server. I follow the Example7-3 of the book, x86 Install Over the Same Subnet (with DVD media). However, I got stuck in adding client to the install server.
# ./add_install_client -e 00:14:5e:18:c5:b3 -i 172.17.139.165 net_test_6 i86pc
Adding Ethernet number for net_test_6 to /etc/ethers
enabling tftp in /etc/inetd.conf
Converting /etc/inetd.conf
enabling network/tftp/udp6 service
enabling network/rarp service
enabling network/rpc/bootparams service
enabling network/nfs/server service
updating /etc/bootparams
copying boot file to /tftpboot/pxegrub.I86PC.Solaris_10-1
ln: cannot create /tftpboot//pxegrub.I86PC.Solaris_10-1: File exists
Create a grub floppy and edit GRUB menu to contain
the following entry:
title Solaris netinstall
rarp
kernel /I86PC.Solaris_10-1/multiboot kernel/unix -B install_media=172.17.139.2
16:/export/home/sol10-x86-807
module /I86PC.Solaris_10-1/x86.miniroot
I don't know what does "Create a grub floppy" mean, can somebody tell me why I got such an error?
Thanks!
Tom

I ran into the same problem when I tried to activate the alternate boot environment. I deleted the file "packages_to_be_added" from the original boot environment. The file is in /var/sadm/system/data. Once the file is deleted try luactive again.

Copy startup-config tftp + %Error opening tftp://192.168.0.12/router-confg (Socket error)

Please advise me on the below error;; I am using tftpd for tft
Router#copy startup-config tftp
Address or name of remote host []? 192.168.0.12
Destination filename [router-confg]?
%Error opening tftp://192.168.0.12/router-confg (Socket error)

This was the right answer.. Solved
https://learningnetwork.cisco.com/thread/56041
im surprised you can ping without attaching a crossover cable.
because if your only using your console port to connect your pc...then you dont have ip connectivity
i think the cable your using to connect your pc to your router fa port is a straight through ethernet cable....
you see it attaches to a switch port in the back of your home router(not cisco router)
not a router port.
so you need a different cable depending on how you want to connect to your router.
you can check to see if it is a crossover cable
just peer down the end of the cable you can see the colours...
if they are in the same order on each end...then it is a straight through cable
if they have a different order...then it is a crossover cable
if your connecting to your pc via your home router.
then yes.....you need to plug a straight through cable into your cisco router from your home router
and it will work
if your connecting your pc directly to your router
then you need to use a crossover cable from the back of your pc...to your cisco router.
and it will work

PXE-E32 tftp error

Similar Messages

Maybe you are looking for