Wds pxe boot - tftp download loop - 4 times F12
Hi
I just set up a new wds server 2012
When trying to pxe boot a client, it loops like this:
Downloaded WDSNBP from...
WDSNBP started using DHCP referral.
Contacting server...
Architecture...
Contacting server...
TFTP download: boot\x86\wdsnbp.com
Downloaded WDSNBP from ...
Architecture...
Contacting Server...
TFTP download: boot\x86\wdsnbp.com
Then it goes on 4 times in a row:
"TFTP Download: Boot\x86\wdsnbp.com"
With Option "Require the user to press the F12 key..." enabled,
I have to press F12 4 times, which is 3 times too many.After the x-th download of wdsnbp.com the client continues the boot process
normally and the rest works fine.
Any help is greatly appreciated.
Michael
We are experiencing the same thing.
This started after enabling scope option 67 to solve this error: PXE-E53: No Boot filename received.
This only occurs on selected machines. We do employ IP Helpers and are thinking this could be an issue.
Similar Messages
-
WDS PXE Boot "Downloading NBP File..."
Have been able to boot and install from WDS VM. Had this happen once before as well but no idea how it resolved, just started working again.
I haven't touched the server since I last used it successfully.
Today when I attempted to boot a new VM from PXE I have been stuck at "Downloading NBP file..." during the PXE boot process. After about 5 minutes it comes to a "Contacting Server (192.168.4.108)" screen where again has sat so far for
around 5 minutes.
Normal behaviour is it just boots, downloads this file in seconds and is at the Windows Setup within a few more seconds.
I've restarted the WDS services on it's server and rebooted the client multiple times, no change. Checked Logs on the WDS (Application, System) and nothing, no clue where to check specific to WDS...
What am I missing here? This is completely vanilla WDS, installed, added files from 2012 R2 disk and that's it. As said worked fine in the past, now magically not working and not the first time it's done this.Enabled all logging available.
Again, fuck MS not making copy and paste work within Hyper V console.
Have this listed followed by errors:
[WDSServer/WDSTFTP] TftpSession[0x00000026BA967730:192.168.4.101:1301] - Error: Received error from client. Code=8.
I can't find what Code=8 is meant to mean. Where is the Technet article or whatever listing the WDS TFTP error codes and their meaning? Why provide error codes if no such reference exists?
This is followed by:
[WDSServer/WDSTFTP] [base\eco\wds\transport\server\tftp\tfptsession.cpp:1636] Expression: , Win32 Error=0x4d3
[WDSServer/WDSTFTP] [base\eco\wds\transport\server\tftp\tfptsession.cpp:1636] Expression: , Win32 Error=0x4d3
[WDSServer/WDSTFTP] [base\eco\wds\transport\server\tftp\tfptserver.cpp:1211] Expression: , Win32 Error=0x4d3
and eventually after some more informational entries another informational "Max retries done, killing session".
I've enabled Verbose logging but really doubt that will help and really can't be assed typing out what is entered in text on another screen on the same PC but MS can't give a way to copy and paste from.
The whole idea with WDS was just a simple way to spin up new VMs when required, without using a ISO which can cause issues if not removed with Clustered Hyper V we've found. Can't believe something that should be so simple is leaving me scratching my head
for hours. Time to look at other products that don't do this to people I think. -
SCCM WDS PXE Boot Authentication
Hi All,
The ability to do domain authentication for a PXE boot in RIS could be achieved by modifying the security directly on the image folder on the RIS server - however, I can't seem to implement the same access control in SCCM 2007 SP1 using WDS.
I have set up the capability to build bare metal machines using the OS Deployment feature in SCCM. The image process is advertised to “All Unknown Computers” and starts with the “builder” hitting F12 on the workstation. The boot image is loaded from the DP share and then the process begins.
My question is: How can I protect the PXE boot process by having the system request a domain Username and Password in order to begin the PXE boot process and also limit who can see the advertisements for the avialable images.
Thanks,
philHi,
You can specify a password for computers that boot to PXE.
For more info :
http://technet.microsoft.com/en-us/library/bb680668.aspx
http://blogs.technet.com/configurationmgr/archive/2009/07/27/a-step-by-step-for-using-osd-through-system-center-configuration-manager-2007.aspx
http://technet.microsoft.com/en-us/library/bb632767.aspx
Regards.
Bechir Gharbi. MCSA, MCSE M+S, MCITP Server/Enterprise Administrator, MCT, MCTS Configuration Manager/Forefront -
I tried to deploy remote os installation from wds on intel D915GAV board which has no builtin NIC, so first i install TP-Link Nic on one of PCI slot and add this NIC driver to Boot.wim on wds but still no booting from wds ............ pls help me anyone
thanksyes already checked that firmware upgrade and PXE has enabled.............. i also try TP Link NIC in Intel DG41RQ board but same no booting from wds and error appear for media failure check cable etc. while on DG41RQ builtin NIC it boot from same wds
-
PXE boot stuck at "downloading config file cmds\z_maint.cmd
Hi.
Since I applied NW6.5sp8 to our ZDM7SP1_HP2 server (January Driver Updates were in
place before), the PXE boot gets stuck at
downloading config file cmds\z_maint.cmd
I had this very same issue before, there I missed to drop the correct version of
sys:\tftp\boot\settings.txt, after doing so, PXE boot was working fine again.
I doublechecked, that the right copies of the files initrd, linux and root are to be
found in sys:tftp and ./boot.
I *CAN* sucessfully download the z_maint.cmd file through
tftp -i 10.27.1.8 get cmds/z_maint.cmd
There is a very similar thread:
news://forums.novell.com/dlee.3shxji...ums.novell.com
The server in that thread is running on W2k3, not NW, as we use. So I suspect, that
it might be a simple "wrong files issue", even though I really checked initrd, ...
several times.
What's my mistake?
Regards, Rudi.Hi.
I just want to add this information:
*ALL* the different client PCs we run get stuck at the very same point of th PXE
boot process.
downloading config file cmds\z_maint.cmd
the cursor is blinking next line and doesn't take any keystrokes.
Regards, Rudi. -
Hi there
I'm trying to deploy a windows 7 image through Windows deployment services via PXE boot from a 2012 R2 server.
Issue: PXE boot is extremely slow, it takes up to more than 60 minutes for the device to download download the PXE boot
Things I already tried to get this up and running:
I've tried to change the TFTP block size via command prompt and via regedit
I've changed the settings on the tab of the WDS role (go to WDS role -> properties on server -> Tab "tftp")
Both actions resulted in PXE boot being even slower than it already was.
To make sure this is not because of our environment I’ve set up the same configuration on a windows server 2008 R2, here PXE boot image is downloaded to the machine within 3 minutes.
Both servers are set up through Hyper-V this is the configuration:
2008 R2:
Memory: 4096 MB
1 Virtual processor
IDE controller 2 hard drives
Network adapter
2012 R2:
Memory: 4096 MB
32 virtual processors
SCSI controller 2 hard drives
Network adapter
I can’t imagine that PXE boot is not working because of the differences of the Hard drives controllers or because of the amount of the virtual processors.
Windows server 2012 R2 seems to handle PXE boot TFTP differently in comparison to 2008 R2.
Do you guys know what I can do/try to get this working?Hi Jacques Rodrigues,
You can run Windows Deployment Services on Hyper-V virtual machines,
that the performance will often be degraded, particularly during the Trivial File Transfer Protocol (TFTP) download phase. This phase is very resource-intensive and may
fail if insufficient resources are available on your server running Hyper-V.
If you are using multicast, Check if IGMP Snooping is enabled i.e. Routers that support multicasting. In particular, Internet Group Membership Protocol (IGMP) snooping should
be enabled on all devices. This will cause your network hardware to forward multicast packets only to those devices that are requesting data. If IGMP snooping is turned off, multicast packets are treated as broadcast packets, and will be sent to every device
in the subnet.
The related KB:
Windows Deployment Services Overview
http://technet.microsoft.com/en-us/library/hh831764.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
OSD to Surface fails to PXE Boot and returns PXEGetPXEData Failed with 0x80004005
Scenario: When trying to Image Windows 8.1 to a Surface Pro, Surface Pro 2 and Surface Pro 3 I have downloaded the latest Surface Firmware and Drivers (August 18th 2014 I believe), the NIC's are in the x64 PXE Boot Image. I have verified that no DHCP Option
67 is set, and that SpanningTree PortFast is enabled. All other Images function correctly, Windows 7 Sp1 works. We use the Microsoft USB NIC, and we PXE boot and download the PXE Image fine, then it comes into windows and goes to detect the NIC, at which point
it fails and reboots.
The Surface has had Firmware update on it to the latest.
It appears the NIC just stops working, which makes me think that the latest Driver pack for Surface does not contain the PXE boot versions for their NIC.
Trying the Docking Station (which utilizes NIC ASIX AX888772) exhibits the same problem.
The NIC stays active until the OSD Screen comes up, it fails trying to load the Surface NIC though (or the NICs in the Driver pack they just released do not include a PXE Boot Driver...the Drivers once imported do not show any as being Boot Critical...which
make me think this is the case even more so.
Doing a USB PXE Boot also fails to load the NIC.
Going to F8 and doing IPCONFIG /RENEW verifies the NIC is not active.
I see tons of postings on the Surface being a nightmare to image.
Errors:
Failed to Download pxe variable file. Code (0x0000001)
PXEGetPXEData Failed with 0x80004005
Anybody having any other experiences out there, or have anything else they could think to try?
David Baur(or the NICs in the Driver pack they just released do not include a PXE Boot Driver...the Drivers once imported do not show any as being Boot Critical...which make me think this is the case even more so.
There are no "PXE boot versions" of drivers at all. What you described just indicates that there is no driver in winpe that matches the hardware. WinPe is based on the respective version of the full os so you have to add Win8.x drivers to the boot image.
The architecture also has to match. Have you added NIC drivers to the boot image at all?
NIC drivers are never boot critical if I am not mistaken.
Torsten Meringer | http://www.mssccmfaq.de -
Hello All,
Please I need help! I have not seen the above error without relationship to two of the known causes for sometime during a Windows 7 osd in an SCCM 2012 R2 environment with a remote DP/PXE server. I understand this error: to occur when the boot images
does not have "Network drivers in the past Winpe version ( i.e. 3.0, 4.0), not Winpe 5.0 which has all the Network and storage drivers for Windows 7" or when Port fast is not enabled on the switch port the pxe device is plugged into. These two causes
stated here have been verified and confirmed not to be the cause in this case within the environment. The PXE boot device has ip-address (verified using ip-config, diskpart as well reveals the disk is online) and can ping the wds/pxe server and the sccm server.
Port fast is enabled on the switch port the device is plugged into. I am stuck on this one; as I could not ascertain the cause on this occasion.
Please see details below and I welcome any help any body can offer, thanks in advance guys!
Client – Winpe x64
Server - Windows Server 2008 R2 configured as a PXE / WDS / SCCM DP
Network - both devices on the same subnet
Problem: Client performs PXE boot, downloads Winpe without problems. Client then tries to download .var file. This is not successful and TFTP timeout is received. Error code in
smsts.log states:
<![LOG[Executing: X:\sms\bin\x64\smstftp.exe -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.285+480"
date="07-01-2014" component="TSPxe" context="" type="0" thread="376" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="14:13:57.332+480" date="07-01-2014" component="TSPxe" context="" type="0"
thread="376" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\x64\smstftp.exe" -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.332+480"
date="07-01-2014" component="TSPxe" context="" type="0" thread="376" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\x64\smstftp.exe" -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.332+480"
date="07-01-2014" component="TSPxe" context="" type="1" thread="376" file="commandline.cpp:827">
<![LOG[Process completed with exit code 1]LOG]!><time="14:14:45.379+480" date="07-01-2014" component="TSPxe" context="" type="1" thread="376"
file="commandline.cpp:1123">
Network trace is detailed below:
324994 11:47:35 04/07/2014 166.7634594
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
325069 11:47:36 04/07/2014 167.7554047 svchost.exe Client Server
TFTP TFTP: Read Request - File: \SMSTemp\2014.07.03.15.45.31.0001.{549002A3-C9C9-4189-8AFE-9F8B272BECC1}.boot.var, Transfer Mode: octet
{UDP:321, IPv4:72}
325070 11:47:36 04/07/2014 167.7556504
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
325071 11:47:36 04/07/2014 167.7598345
Server Client TFTP TFTP: Data - Block Number: 1 {UDP:322, IPv4:72}
325072 11:47:36 04/07/2014 167.7607151
Client Server TFTP TFTP: Acknowledgement - Block Number: 1 {UDP:322, IPv4:72}
325073 11:47:36 04/07/2014 167.7608240
Server Client TFTP TFTP: Data - Block Number: 2 {UDP:322, IPv4:72}
325074 11:47:36 04/07/2014 167.7615948
Client Server TFTP TFTP: Acknowledgement - Block Number: 2 {UDP:322, IPv4:72}
325075 11:47:36 04/07/2014 167.7616991
Server Client TFTP TFTP: Data - Block Number: 3 {UDP:322, IPv4:72}
325076 11:47:36 04/07/2014 167.7624602
Client Server TFTP TFTP: Acknowledgement - Block Number: 3 {UDP:322, IPv4:72}
325077 11:47:36 04/07/2014 167.7625635
Server Client TFTP TFTP: Data - Block Number: 4 {UDP:322, IPv4:72}
325078 11:47:36 04/07/2014 167.7629426
Client Server TFTP TFTP: Acknowledgement - Block Number: 4 {UDP:322, IPv4:72}
325079 11:47:36 04/07/2014 167.7630452
Server Client TFTP TFTP: Data - Block Number: 5 {UDP:322, IPv4:72}
325080 11:47:36 04/07/2014 167.7637927
Client Server TFTP TFTP: Acknowledgement - Block Number: 5 {UDP:322, IPv4:72}
325081 11:47:36 04/07/2014 167.7638947
Server Client TFTP TFTP: Data - Block Number: 6 {UDP:322, IPv4:72}
325082 11:47:36 04/07/2014 167.7643324
Client Server TFTP TFTP: Acknowledgement - Block Number: 6 {UDP:322, IPv4:72}
325083 11:47:36 04/07/2014 167.7644367
Server Client TFTP TFTP: Data - Block Number: 7 {UDP:322, IPv4:72}
325084 11:47:36 04/07/2014 167.7652140
Client Server TFTP TFTP: Acknowledgement - Block Number: 7 {UDP:322, IPv4:72}
325085 11:47:36 04/07/2014 167.7653183
Server Client TFTP TFTP: Data - Block Number: 8 {UDP:322, IPv4:72}
325086 11:47:36 04/07/2014 167.7660907
Client Server TFTP TFTP: Acknowledgement - Block Number: 8 {UDP:322, IPv4:72}
325087 11:47:36 04/07/2014 167.7661940
Server Client TFTP TFTP: Data - Block Number: 9 {UDP:322, IPv4:72}
325088 11:47:36 04/07/2014 167.7669372
Client Server TFTP TFTP: Acknowledgement - Block Number: 9 {UDP:322, IPv4:72}
325089 11:47:36 04/07/2014 167.7670323
Server Client TFTP TFTP: Data - Block Number: 10 {UDP:322, IPv4:72}
325090 11:47:36 04/07/2014 167.7674067
Client Server TFTP TFTP: Acknowledgement - Block Number: 10 {UDP:322, IPv4:72}
325091 11:47:36 04/07/2014 167.7674809
Server Client TFTP TFTP: Data - Block Number: 11 {UDP:322, IPv4:72}
325092 11:47:36 04/07/2014 167.7681308
Client Server TFTP TFTP: Acknowledgement - Block Number: 11 {UDP:322, IPv4:72}
325093 11:47:36 04/07/2014 167.7682056
Server Client TFTP TFTP: Data - Block Number: 12 {UDP:322, IPv4:72}
325094 11:47:36 04/07/2014 167.7685383
Client Server TFTP TFTP: Acknowledgement - Block Number: 12 {UDP:322, IPv4:72}
325095 11:47:36 04/07/2014 167.7686108
Server Client TFTP TFTP: Data - Block Number: 13 {UDP:322, IPv4:72}
325096 11:47:36 04/07/2014 167.7692475
Client Server TFTP TFTP: Acknowledgement - Block Number: 13 {UDP:322, IPv4:72}
325097 11:47:36 04/07/2014 167.7693216
Server Client TFTP TFTP: Data - Block Number: 14 {UDP:322, IPv4:72}
325098 11:47:36 04/07/2014 167.7696477
Client Server TFTP TFTP: Acknowledgement - Block Number: 14 {UDP:322, IPv4:72}
325099 11:47:36 04/07/2014 167.7697202
Server Client TFTP TFTP: Data - Block Number: 15 {UDP:322, IPv4:72}
325100 11:47:36 04/07/2014 167.7703651
Client Server TFTP TFTP: Acknowledgement - Block Number: 15 {UDP:322, IPv4:72}
325101 11:47:36 04/07/2014 167.7704386
Server Client TFTP TFTP: Data - Block Number: 16 {UDP:322, IPv4:72}
325102 11:47:36 04/07/2014 167.7707479
Client Server TFTP TFTP: Acknowledgement - Block Number: 16 {UDP:322, IPv4:72}
325103 11:47:36 04/07/2014 167.7708214
Server Client TFTP TFTP: Data - Block Number: 17 {UDP:322, IPv4:72}
325104 11:47:36 04/07/2014 167.7714862
Client Server TFTP TFTP: Acknowledgement - Block Number: 17 {UDP:322, IPv4:72}
325105 11:47:36 04/07/2014 167.7715603
Server Client TFTP TFTP: Data - Block Number: 18 {UDP:322, IPv4:72}
325106 11:47:36 04/07/2014 167.7718715
Client Server TFTP TFTP: Acknowledgement - Block Number: 18 {UDP:322, IPv4:72}
325107 11:47:36 04/07/2014 167.7719450
Server Client TFTP TFTP: Data - Block Number: 19 {UDP:322, IPv4:72}
325108 11:47:36 04/07/2014 167.7726029
Client Server TFTP TFTP: Acknowledgement - Block Number: 19 {UDP:322, IPv4:72}
325109 11:47:36 04/07/2014 167.7726800
Server Client TFTP TFTP: Data - Block Number: 20 {UDP:322, IPv4:72}
325110 11:47:36 04/07/2014 167.7733471
Client Server TFTP TFTP: Acknowledgement - Block Number: 20 {UDP:322, IPv4:72}
325111 11:47:36 04/07/2014 167.7734203
Server Client TFTP TFTP: Data - Block Number: 21 {UDP:322, IPv4:72}
325112 11:47:36 04/07/2014 167.7737411
Client Server TFTP TFTP: Acknowledgement - Block Number: 21 {UDP:322, IPv4:72}
325113 11:47:36 04/07/2014 167.7738142
Server Client TFTP TFTP: Data - Block Number: 22 {UDP:322, IPv4:72}
325114 11:47:36 04/07/2014 167.7744648
Client Server TFTP TFTP: Acknowledgement - Block Number: 22 {UDP:322, IPv4:72}
325115 11:47:36 04/07/2014 167.7745386
Server Client TFTP TFTP: Data - Block Number: 23 {UDP:322, IPv4:72}
325116 11:47:36 04/07/2014 167.7748657
Client Server TFTP TFTP: Acknowledgement - Block Number: 23 {UDP:322, IPv4:72}
325117 11:47:36 04/07/2014 167.7749395
Server Client TFTP TFTP: Data - Block Number: 24 {UDP:322, IPv4:72}
325118 11:47:36 04/07/2014 167.7755914
Client Server TFTP TFTP: Acknowledgement - Block Number: 24 {UDP:322, IPv4:72}
325119 11:47:36 04/07/2014 167.7756649
Server Client TFTP TFTP: Data - Block Number: 25 {UDP:322, IPv4:72}
325120 11:47:36 04/07/2014 167.7760109
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
325277 11:47:37 04/07/2014 168.7554246
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
325278 11:47:37 04/07/2014 168.7709396
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
325397 11:47:39 04/07/2014 170.7708892
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
326185 11:47:40 04/07/2014 171.7552905
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
327030 11:47:43 04/07/2014 174.7588879
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
327031 11:47:43 04/07/2014 174.7707730
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
327178 11:47:44 04/07/2014 175.7552028
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
327510 11:47:45 04/07/2014 176.7551962
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328598 11:47:48 04/07/2014 179.7552497
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328630 11:47:51 04/07/2014 182.7551309
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328631 11:47:51 04/07/2014 182.7707620
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
328658 11:47:54 04/07/2014 185.7550375
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328669 11:47:57 04/07/2014 188.7709719
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328677 11:47:59 04/07/2014 190.7862445
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
328690 11:48:00 04/07/2014 191.7708666
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328717 11:48:03 04/07/2014 194.7706918
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328730 11:48:06 04/07/2014 197.7704623
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328736 11:48:07 04/07/2014 198.7861669
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
329217 11:48:09 04/07/2014 200.7705229
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
329420 11:48:12 04/07/2014 203.7704633
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
329795 11:48:15 04/07/2014 206.7704298
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
329796 11:48:15 04/07/2014 206.7858646
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
329990 11:48:18 04/07/2014 209.7704360
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
330005 11:48:21 04/07/2014 212.7703291
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
330014 11:48:23 04/07/2014 214.7862410
Client Server TFTP TFTP: Error - ErrorCode: 0, ErrorMessage: timeout on receive {UDP:322, IPv4:72}Hi,
According to the logs, this issue still should be related to network driver. It failed after network driver initialized. Please try to use another network driver.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
WDS PXE Problems on 1 model of PC only - The following Client failed TFTP Download - Error Code 1460
Hey all,
I am experiencing a problem with my WDS PXE Environment, with 1 specific model of PC's only. This is a Dell XPS machine with an Intel e1000 nic in it.
The problem is that when you PXE Boot, it starts off fine, and I reach a menu that has all of my boot images listed, but as soon as you pick one it hangs on a black screen.
From the event viewer on the server I can see the following entry:
The Following Client failed TFTP Download:
IP: 10.130.148.211
Filename: \Boot\Boot.SDI
ErrorCode: 1460
I've done some google searching and found some topics that could be related, but none of the fixes mentioned helped me. This is the one I tried:
http://social.technet.microsoft.com/Forums/en-US/winserversetup/thread/a1246f62-6a8a-482b-9323-7e02dfeab196/#52aaf6fb-9494-4327-bbc3-8afe3e78905c
The problem I had was that the link they gave to the Hotfix, doesnt actually have anyway to download the hotfix!!
http://support.microsoft.com/kb/975710
Although
I am not convinced that packet size is the problem here, more likely some network or disk controller driver issues??
No
idea at all where to go from here. It is only this one model of PC that fails, and all others work fine. If someone can point me in the right direction it would be very greatly appreciated.
I
would be happy to provide you with any additional details you may require.
Thanks,
-BenYou need to contact CSS to get this fix.
Hotfix Information
A supported hotfix is now available from Microsoft. However, it is intended to correct only the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore,
if you are not severely affected by this problem, we recommend that you wait for the next Windows Server 2008 service pack that contains this hotfix.
To resolve this problem immediately, contact Microsoft Customer Support Services to obtain the hotfix. For a complete list of Microsoft Customer Support Services telephone numbers
and information about support costs, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)
John | Program Manager | System Center Configuration Manager -
WDS 2012 R2 - Cannot PXE multiple clients at the same time
Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine. -
TFTP Timeout Error on PXE Boot
Ok this is what happened. I tried to patch a image with windows updates - It filled up my hard drive. So I canceled the process and attempted to remove the folder it created on my hard drive. I went to try pxe boot a machine and I got the
blue screen:
After this I removed the check next to pxe to uninstall WDS and I waited for it to uninstall and reboot. After that I clicked the check box next pxe so it would install everything again. I redistributed the x86 and x64 boot images but now when
I try to pxe boot a machine I get the following in event viewer:
The Following Client failed TFTP Download:
IP *.*.*.*
Filename: SMSBoot\x64\wdsnbp.com
ErrorCode: 1460
I even made added the entry in the registry to change the TFTP block size. I have no idea what to do at this point. I am running Windows Server 2008 R2 and SCCM 2012 SP1. On the client machine I am getting TFTP timeout.1460 (0x5B4) =ERROR_TIMEOUT
This operation returned because the timeout period expired.
Have you seen this KB?
Operating system deployment over a network by using WDS fails in Windows Server 2008 and in Windows Server 2008 R2
http://support.microsoft.com/kb/975710
For more information, see the following TechNet articles:
WDS TFTP Server:
http://technet.microsoft.com/en-us/library/cc753134(WS.10).aspx
(http://technet.microsoft.com/en-us/library/cc726631(WS.10).aspx)
Network Boot Programs (NBP):
http://technet.microsoft.com/en-us/library/cc753134(WS.10).aspx
(http://technet.microsoft.com/en-us/library/cc753134(WS.10).aspx)
How to Modify the BCD Store Using Bcdedit: http://technet.microsoft.com/en-us/library/cc731245(WS.10).aspx#BKMK_41
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Slow PXE boot. TFTP windowing issue
Hi
we have just set up SCCM 2012 and have configured OSD. It works well apart form the length of time it takes to download the boot.wim on a PXE boot.
We took some network traces and noticed that TFTP was behaving as if the Windowing was set to 1 so every block was being ACK'ed before another was sent.
I checked the Windowing size on the bcd file of the boot image and the setting was
ramdisktftpwindowsize 4
Any ideas why TFTP doesn;t seem to be picking this up?The Microsoft article would suggest that the Window Size options should be available in the latest implementations of PXE
http://technet.microsoft.com/en-us/library/hh974416.aspx
TFTP enhancements
What value does this change add?
Trivial File Transfer Protocol (TFTP) enhancements result in improved performance.
What works differently?
TFTP (Trivial File Transfer Protocol) has been enhanced and delivers improved results in performance.
You use the Windows Deployment Services Trivial File Transfer Protocol (TFTP) server to download the files
that are needed to do a network boot using the Pre-Boot Execution Environment (PXE). PXE technology is a standard created by Intel that establishes a common and consistent set of pre-boot services within the boot firmware. The end goal is to enable a client
to do a network boot and receive a network boot program (NBP) from a network boot server.
TFTP enhancements include:
Scalable buffer management Provides
support for a shared client buffer; allows buffering an entire file instead of a fixed size buffer for each client. Scalable TFTP buffer feature allows maintaining a single buffer per file in the server. When the server is buffering a file in shared mode,
different sessions can read from the same shared buffer.
Scalable port management Ability
to use a dynamic or a fixed range of UDP ports to service clients with shared UDP port allocation. Sharing the same server port among different TFTP sessions improves scalability because there are sufficient ports when more clients are actively using the server.
Variable-size transmission window Allows
the client and server to determine the largest workable window size, resulting in improved TFTP performance. Provides the ability to dynamically determine the optimal window size.
Maximum TFTP block size Previously implemented
as a registry setting, this is now exposed to users through WDSUTIL and the WDS MMC snap-in. -
PXE Boot with UEFI. WDS not sending WinPE wim
I am trying to test PXE booting on devices that only have UEFI and no CSM support.
We are running Windows Server 2008 R2 in our environment.
On the DHCP server, we have option 66 and 67 set. If I change option 67 to SMSBoot\x86\wdsnbp.com and boot a traditional BIOS system (non UEFI) the SCCM server responds and gives me the option to hit F12 and PXE boot. This works without issue and can deploy
images.
I then change option 67 to SMSBoot\x64\wdsmgfw.efi and use a machine that is pure UEFI (meaning UEFI without any legacy support / CSM). The system appears to successfully download the wdsmgfw.efi and font file via TFTP as shown in the WDS logs. However, it
then goes to the next sreen where it is trying to contact the WDS server. AFter retrying for a while it will error out with error 0x102 which I believe translates to ERROR_TIMEOUT
The SMSPXE.log repeats the following:
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName="" ServerRemoteName=""><Machine><ClientID>8908f9c4-c345-49ba-b137-af7b0b983584</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="GAS20043" OfferIDTime="7/24/2013 3:12:00 PM" PkgID="GAS00037" PackageVersion="" PackagePath="<a href="http:///SMS_DP_SMSPKG$/GAS00038">http://<IVE
REMOVED THIS>/SMS_DP_SMSPKG$/GAS00038" BootImageID="GAS00038" Mandatory="0"/></ClientIDReply>
SMSPXE 7/24/2013 7:14:58 PM 7724 (0x1E2C)
00:50:56:01:00:82, DF6A0C42-F909-B518-7B44-3150B662200B: found optional advertisement GAS20043 SMSPXE 7/24/2013 7:14:58 PM 7724 (0x1E2C)
Looking for bootImage GAS00038 SMSPXE 7/24/2013 7:14:58 PM 7724 (0x1E2C)
Any idea what may be going on?Hey,
I am having the following situation:
DP1 = Windows Server 2008 R2 SP1 (Standalone Primary Site Server SCCM 2012 SP1 CU2)
DP2 = Windows Server 2012
UEFI Client: Microsoft Surface Pro (with Microsoft Surface Network Adapter)
BIOS Client: HyperV Virtual machine with Legacy network adapert
DP1; DP2 and DHCPServer all in Subnet1.
(IP Helper is set for DHCPServer for DHCP and for DP1 & DP2 for DHCP and BootP - I checked serveral times if everything is right here)
UEFI Client and BIOS Client in Subnet2.
Situation1 -- Using no DHCP Options and both DPs(DP1 and DP2) WDS running:
UEFI Client - Boots perfectly (contacting Server DP2)
BIOS Client - Boots perfectly (contacting Server DP2)
Situaion2 -- Using no DHCP Options and WDS just running on DP1:
UEFI Client - Does not boot (no error information is provided)
BIOS Client - Does not boot (no Bootfilename recieved)
Situation3 -- Using DHCP Options(Option 66="IP of DP1" Option 67="SMSBoot\x86\wdsnbp.com") and WDS just running on DP1:
UEFI Client - Does not boot (no error information is provided)
BIOS Client - Boots perfectly (contacting Server DP1)
Situation4 -- Using DHCP Options(Option 60="PXEClient" Option 66="IP of DP1" Option 67="SMSBoot\x86\wdsnbp.com") and WDS just running on DP1:
UEFI Client - Boots perfectly (contacting Server DP1)
BIOS Client - Does not boot (taking hours to recieve dhcp options..)
My problem is i am having a lot of location with 2008 R2 SP1 server only (this is why situation 1 is not enough for me :-( ).
Based on this article:
http://ccmexec.com/2013/05/configmgr-2012-uefi-and-pxe-boot-support/
x64 UEFI Devices should work with Server 2008 R2 SP1 (not only Server 2012).
Interesting is I am having ALL files on Server 2008 R2 SP1 like they are on Server 2012 (in SMSBoot\x86 folder, too!)??
Some more ideas?
Thank you for help -
WDS PXE Uefi not working in AD integrated mode, TFTP to slow
Dear all
1 Physical host: W2k12R2, 1 Hyper-V virtual switch.
1 Hyper-V VM with W2k12R2 DC with DNS, DHCP, WDS.
1 Empty Hyper-V VM Generation 2 UEFI booting from network.
Problem: Error "PXE-E16: No offer received" on the empty Hyper-V VM when trying to Uefi boot from WDS in AD integrated mode.
I verified that it works when WDS is set-up to standalone mode. See also:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/ceca6149-bedd-4860-8a7f-a1c83bf99aa4/wds-efi-bios-wont-pxe-boot-into-efi-mode
PS: Switch to standalone mode: On the WDS server: wdsutil /verbose /uninitialize-server /server:<servername>; wdsutil /verbose /progress /initialize-server /server:<servername>
/reminst:C:\RmInst
Cause (found by Netmon IP traffic monitoring):
The Client asks for the TFTP Server on UDP port 4011.
The TFTP Server takes more than 8 seconds to reply on port 4011.
This seems to be due to NbtNs (Netbios name search) broadcast queries searching for 1C Domain Controllers.
Solution: ???????
Any help is much appreciated.
Dominique, Zürich, Switzerland.Hi Dominique, Zürich, Switzerland.,
You can also create a virtual machine to act as a client machine when building and testing your deployment images. This is especially useful for building your custom images.
Note, however, that the performance will often be degraded, particularly during the Trivial File Transfer Protocol (TFTP) download phase. This phase is very resource-intensive and may fail if insufficient resources are available on your server running Hyper-V,
could you use the physical computer then configure the same settings then monitor this issue again.
The related KB:
Windows Deployment Services Overview
https://technet.microsoft.com/en-us/library/hh831764.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
This morning came in to find clients were not getting there bootfiles through PXE. I checked the logs to find the following events related to WDS.
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Has anyone seen this or have a link to a resolution?
tconnersHotfix loaded but didn't help.
Found a few articles referring to rebuilding the perf counter library. I ran "lodctr /R" failed first time then worked the second time. I believe the errors:
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Are gone but PXE boot still fails.
Do you think I might have to uninstall WDS and reinstall? "Using SCCM console to just remove PXE"
tconners
Maybe you are looking for
-
How to delete file from other system(LAN)
Hello folks, Cud u plz help me out in finding code for deleting a file from other system i.e in LAN,assuming that the connection is already established to that system.
-
New error with upgrade jboss/tomcat: "Connection handle has been closed and is unusable"
Hi, This error suddenly appeared when we upgraded from jboss3/tomcat5.0 to jboss4.2/tomcat5.5. here's the usecase: 1) User clicks on report link 2) Crystal reports web componnent displays screen to fill in report parameters. 3) user enters parameters
-
hello, what does VARIANT mean?How can I use it in VC++? Who can give me some details about VARIANT? thanks. 帖子被nicolasdai在09-26-2006 04:10 AM时编辑过了
-
HT1212 wont let me restore shows code 3194
I have tried to restore my daughter's ipod touch as she has forgotten her passcode and it keeps showing error 3194 an anyone help?
-
Deploying JSR-168 portlets error in Weblogic Portal 9.2MP2
Hello, We're using WebLogic 9.2MP2 and ALBPM 5.7 SP2 enterprise server standalone. We want display in our portal the In-Box to the user as a JSR-168 portlet. We are following the steps in the following guide: http://edocs.bea.com/albsi/docs57/admingu