PXE Errors - new install of CUCM on UCS C series servers

Hi All
I'm in a middle of production install of CUCM , CUWL and IM and Presence on Cisco UCS Servers C220 and C240.
Until last friday I borught the CUCM cluster along with CUWL server online and lastly just completed the install of IM and Presence PUB left home.
Then tried logging on Sunday from home via vSphere client unable to connect to these boxes and the webURL's either of apps didn't work.
I presumed something and then tried to gain access via CIMC port and after launching KVM console I see the attached PXE errors.?
I'm not sure why this happend all of a sudden nothing changed in the boot order nor in the network.
Please send me into right direction....this structure I had up and running from last one week and phones registered too.
Thanks
Mohammed

Never mind I figured it out myself and you'll surpised how fragile the UCS C series servers are as I was running them on single power supply and the inside hardware was acting weird for this purpose and once I connected the second power supply and rebooted the server the vmware loads and everything is back online.
How strange this issue was ...
Thanks
Mohammed

Similar Messages

  • LXDE xsession errors - new install

    Today I tried LXDE for the first time.
    Every logout from the desktop puts nine entries into .xsession-errors:
    ** (lxsession-logout:1069): WARNING **: dbus-interface.c:116: DBUS: The name org.freedesktop.ConsoleKit was not provided by any
    .service files
    ** (lxsession-logout:1069): WARNING **: dbus-interface.c:116: DBUS: The name org.freedesktop.ConsoleKit was not provided by any
    .service files
    ** (lxsession-logout:1069): WARNING **: dbus-interface.c:116: DBUS: The name org.freedesktop.UPower was not provided by any .service files
    ** (lxsession-logout:1069): WARNING **: dbus-interface.c:116: DBUS: The name org.freedesktop.UPower was not provided by any .service files
    ** (lxsession-logout:1069): WARNING **: dbus-interface.c:116: DBUS: The name org.freedesktop.Hal was not provided by any .service files
    ** (lxsession-logout:1069): WARNING **: dbus-interface.c:116: DBUS: The name org.freedesktop.Hal was not provided by any .service files
    ** (lxsession-logout:1069): WARNING **: dbus-interface.c:116: DBUS: The name org.freedesktop.Hal was not provided by any .service files
    ** (lxsession-logout:1069): WARNING **: dbus-interface.c:116: DBUS: The name org.freedesktop.Hal was not provided by any .service files
    (pcmanfm:753): Gtk-CRITICAL **: _gtk_accel_group_detach: assertion `g_slist_find (accel_group->acceleratables, object) != NULL'
    failed
    ie two relating to ConsoleKit, two to UPower, four to Hal, and the last one - which would appear to be the most serious - I have no understanding of.
    I can make both UPower entries and two of the Hal entries disappear by simply installing the "upower" package.
    Can anyone tell me what may be causing the ConsoleKit, Gtk, and remaining Hal entries?
    I should say I'm using LXDM and don't have xorg-init package installed. I can see nothing in the LXDE documents to suggest xinitscripts are necessary. Is this ok?
    Thanks for any advice.
    Last edited by bananabrain (2013-02-06 20:05:53)

    Never mind I figured it out myself and you'll surpised how fragile the UCS C series servers are as I was running them on single power supply and the inside hardware was acting weird for this purpose and once I connected the second power supply and rebooted the server the vmware loads and everything is back online.
    How strange this issue was ...
    Thanks
    Mohammed

  • Does the UCS C-Series Servers supports PCI/e card digium T1/E1

    Hello,
    Does the UCS C-Series Servers supports/compatible with PCI/e card digium  TE407P/TE420 T1/E1.?
    The server will be used as Asterisk server.
    Thanks
    Philip

    Hi Philip,
    Compatibility will depend on the server model that you have and whether the digium card is a full length, low profile, or half length pcie card.  Take a look at http://www.cisco.com/en/US/products/ps10493/prod_models_comparison.html#~tab-a for details.  If there are any issues with the card itself once it is installed it will have to go through the 3rd party manufacturer.

  • Error Compilation MIBs Supported for Cisco UCS C-series software release 1.4(3) and later releases on IBM Director 6.3.2

    Hi,
    I have an IBM director 6.3.2 on a Windows Server 2008R2
    I try to install the MIB for manage Cisco UCS C-460 server.
    I downloaded the mib on the cisco ftp.
    the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
    But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
    Ho can I fix this issue...

    Hi,
    I have an IBM director 6.3.2 on a Windows Server 2008R2
    I try to install the MIB for manage Cisco UCS C-460 server.
    I downloaded the mib on the cisco ftp.
    the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
    But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
    Ho can I fix this issue...

  • Migration of CUCM on UCS C series to UCS B series.

    Planning a move from UCS rack servers to newer blades. I was wondering what the Cisco recommended method would be. I see allot of people saying that you should vMotion things over but also that there are allot of caveats with it. I have also heard some people recommend Cisco Prime Collaboration Deployment but I can't quite figure out how that would work. So I thought I would ask the community for it's opinion on the subject. 
    CUCM is on version 10.5, nothing will be patched or upgraded in the move just the guest OS will be moved over. Also, these platforms do not share storage, the C series have the guest stored local and the B series will have a SAN. 

    Yup, there it is in black and white, thanks.
    By chance you wouldn't have a link to the proper method for moving a cluster do you? I know you move the pub first then the subs but I can't find a page that details the process.

  • UCS B-Series servers

    Can B-series sever ping each other within the UCS chassis without ethernet uplink? Please advice.
    Thanks

    Hi Kaivon,
    1) The chassis has to be connected to a FI,
    2) In the service profile you will have to make sure the traffic is send to the same fabric / FI
    3) In the default behaviour it won't, however you can change the Network Control policy to make this work.
    LAN Tab -> Network Control policy -> Create a new policy -> Action on uplink fail -> change it to Warning -> in the service profile on the vnic specify this new policy.
    However for a production environment we recommen not to change the link policy to warning and leave it at link down to avoid any failover issues etc.
    ./abhinav

  • Nexus 5548 to UCS-C series network connectivity.

    Hi There,
    I am new to nexus world, mainly telecom side. I have a situation where a vendor like to deploy two Cisco UCS-C series servers for voice deployment.
    Each UCS C240 M3 server has 4 NICs, 2 nics bonded 802.1q will connect to primary nexus 5k switch and other two bonded will connect to secondary nexus switch. we have a vPC domain and no FEXes so we have to connect these two servers directly to Nexus 5ks.
    My question is it possible with teamed nics to coonect to 2 different nexus switches?
    Can anyone guide me how can I achieve this design? see attached.
    Thanks Much

    It will also depend on the Server network settings such as OS, software switch flavor and NIC teaming option on the server.
    x- if you run ESXi, then you may check out the following KB article. 
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004088
    x- if you use N1Kv, then you can use LACP or static port-channeling, but be sure to make it consistent on the upstream switches.
    hope it helps.
    Michael

  • CUCM 9.1.1 Critical Error on Install

    Hi All,
    I'm trying to install CUCM 9.1.1 on UCS Blade (UCS B200 M2, PID: N20-B6625-1).
    I keep getting Critical Error as soon as the install startes the Database installation. It is a new install and i'm using OVA template from Cisco website
    Your help will be much appreciated.
    Thanks
    Mohammed

    Hi Mohammed,
    that's a common problem of CUCM 9.1.1.20000-5 setup on Vmware: it doesn't seem to be related to some hardware incompatibility (I tried the installation on three different infrastructures, with the same error), but just a problem of this release.
    The only solution I found was to install 9.1.1.10000-11 (or a previous version) and then apply the 9.1.1.20000 patch during the setup: probably you will still get a critical error, but the installation process seems to complete correctly...at least in my case.
    I'm still waiting for an official answer from Cisco TAC.
    Gianmaria

  • Team Foundation Server 2013 update 4 New Install - Error 503 Service Unavailable for Sharepoint Central Admin

    Hello,
    I ran a new install of Team Foundation Server and let it install the built in SharePoint pieces on a single server setup. After the install i'm able to access the
    http://teamfoundation:8080/tfs/ address without issue but am unable to create a project. When I attempt to create a project I get the following error:
    TF30172: You do not have permission to create a new team project (when checking security i'm a member of the project collection administrators and Team Foundation Administrators)
    This led me to look at the sharepoint central administration site where I receive the following error:
    Error 503 Service Unavailable
    I've gone through and validated the identity is set correctly in IIS for the following services:
    SharePoint Central Admin v4
    SharePoint15AppPool
    The SharePoint Web Services Root is set as LocalService instead of the domain user.
    The identity domain user is setup as local administrator on the Team Foundation Server. They are all set to use .net v4.0.30319 with integrated Pipeline mode.
    Any help would be great!
    Thanks!
    Eric

    Hi Eric,      
    Thanks for your post.
    Please share your detailed team project creation log here.
    In your TFS Admin Console>>Extensions for SharePoint Products tab, ensure SharePoint Web Application shows correctly in the right panel. And go to TFS Admin Console>>Application Tier>>SharePoint Web Applications tab, ensure your SharePoint
    web application displays in the right panel, then select your SharePoint web application and click Repair Connection, ensure can repair successfully.
    In your IIS Manager, select your SharePoint Central Administration V4 site and click Browser:17012(http) in the right panel, check if your SharePoint Central site can be opened successfully or not. If your SharePoint Central site cannot be accessed, I think
    this issue relate to your SharePoint site, you should contact SharePoint experts to resolve this issue first. After you resolved this issue and your SharePoint Central Admin site can be accessed correctly, then try to create your team project(within SharePoint
    site) again, if there still has issue when creating team project, please share the detailed error message here, we will try to resolve it.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • New install of Crystal 2013 Server; getting errors

    New install of Crystal 2013 Server on Windows 2012R2 Server
    In the Connectivity Services; the ConnectionServer32 shows a state of Initalizing, and Disabled
    In the Crystal Report Services; the CrystalReports2013ProcessingServer shows a state of Running with errors and Disabled
    In the Crystal Report Services; the CrystalReports2013ReportApplicationServer shows a state of Stopped and Enabled
    Hovering over Stopped I get "The Executable could not be launched. Possible reasons are insufficient RAM or disk space, or an invalid filepath or working directory. Actual reason: CreateProcess error + 14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log."
    Application Event Log Entry:
    Log Name:      Application
    Source:        BusinessObjects_cms
    Date:          4/21/2014 11:43:12 AM
    Event ID:      33017
    Task Category: General
    Level:        Warning
    Keywords:      Classic
    User:          N/A
    Computer:      DBH-TCRYSTAL01.sbcounty.gov
    Description:
    Unable to contact server DBHTCRYSTAL01.ConnectionServer32 on machine DBH-TCRYSTAL01.sbcounty.gov to perform status notification. Please check the server's system log for errors.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="BusinessObjects_cms" />
        <EventID Qualifiers="0">33017</EventID>
        <Level>3</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-04-21T18:43:12.000000000Z" />
        <EventRecordID>32081</EventRecordID>
        <Channel>Application</Channel>
        <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
        <Security />
      </System>
      <EventData>
        <Data>DBHTCRYSTAL01.ConnectionServer32</Data>
        <Data>DBH-TCRYSTAL01.sbcounty.gov</Data>
      </EventData>
    </Event>
    System Event Log Entry:
    Log Name:      System
    Source:        Microsoft-Windows-DistributedCOM
    Date:          4/21/2014 7:49:07 AM
    Event ID:      10016
    Task Category: None
    Level:        Error
    Keywords:      Classic
    User:          SYSTEM
    Computer:      DBH-TCRYSTAL01.sbcounty.gov
    Description:
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {05D1D5D8-18D1-4B83-85ED-A0F99D53C885}
    and APPID
    {AD65A69D-3831-40D7-9629-9B0B50A93843}
    to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
        <EventID Qualifiers="0">10016</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-04-21T14:49:07.818690400Z" />
        <EventRecordID>8228</EventRecordID>
        <Correlation />
        <Execution ProcessID="668" ThreadID="804" />
        <Channel>System</Channel>
        <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="param1">application-specific</Data>
        <Data Name="param2">Local</Data>
        <Data Name="param3">Launch</Data>
        <Data Name="param4">{05D1D5D8-18D1-4B83-85ED-A0F99D53C885}</Data>
        <Data Name="param5">{AD65A69D-3831-40D7-9629-9B0B50A93843}</Data>
        <Data Name="param6">NT AUTHORITY</Data>
        <Data Name="param7">SYSTEM</Data>
        <Data Name="param8">S-1-5-18</Data>
        <Data Name="param9">LocalHost (Using LRPC)</Data>
        <Data Name="param10">Unavailable</Data>
        <Data Name="param11">Unavailable</Data>
      </EventData>
    </Event>
    I also have second Windows 2012R2 Server / Crystal 2013 Server install that is working just fine and the only difference is it is not a member of the Domain.
    Barry Streets
    [email protected]
    510-238-2727 ext 2780

    In addition to checklists provided by Josh; I would suggest you to perform a repository scan of the system to identify whether any objects were not installed properly and there might be a possible corruption. Use the link mentioned below to perform repository scanning.
    How to use Repository Diagnostic Tool - Business Intelligence (BusinessObjects) - SCN Wiki
    You can try to repair the install. Also as this is a new install you can directly go for re-installing the software.
    PS: Try to re-download the software from the service market place rather than copying the installer from existing one.

  • New Install Error on Windows Vista

    On a new install I am getting this error when I try to request license.
    I am trying to install it locally on a new Windows Vista machine.
    Server Error in '/B1WebTools' Application.
    Object reference not set to an instance of an object.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [NullReferenceException: Object reference not set to an instance of an object.]
       netpoint.LicenseRequest.Page_Load(Object sender, EventArgs e) +266
       System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
       System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
       System.Web.UI.Control.OnLoad(EventArgs e) +99
       System.Web.UI.Control.LoadRecursive() +50
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
    Version Information: Microsoft .NET Framework Version:2.0.50727.3074; ASP.NET Version:2.0.50727.3074
    Has anyone seen this before?
    Edited by: Brett Flake on May 28, 2009 9:31 PM

    And how can I uninstall it from a Creative Suite ??
    And how can I install then the next full version "directly"??
    And I don't really understand.
    Adobe Updater cannot install this update, and tries it again after a month, it is downloading this update once in a month, and when it fails, closes itself,  and says sorry, see you later in november? And when it fails, I cannot say, please stop bugging me with this.
    Almost the same problem with the Adobe Media Player, which cannot play even the files advertised in its own browser, : adobe trainings from adobe related sites, and cannot update itself. It's almost brutal. How does this happen?

  • An error occurred while attempting to change modules while starting up LR 4.1. New install on a new

    An error occurred while attempting to change modules while starting up LR 4.1. New install on a new MBP first time trying to start up

    Just a guess, but since everything is new, perhaps you have some sort of permissions problem.
    Make sure your user has write access to all the locations mentioned in this link:
    http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html
    Hal

  • New Install Win 2000 Server ORA-12560 : TNS : Protocol Adapter Error

    I am trying to learn Oracle.
    I get the following when logging into SQL*Plus.
    ORA-12560 : TNS : Protocol Adapter Error
    I have just installed New Install Win 2000 Server and then Oracle 8i for Win2k
    null

    Step 1 - from a command line on the database machine, enter 'lsnrctl status' and report the output
    Step 2 - display the contents of the %ORACLE_HOME%\network\admin\tnsnames.ora file on the machine running sqlplus.
    These are the first two stepo, whether on the database machine or in a traditional client-server configuration.

  • [Solved] Grub Error 15 at boot on new install.

    So I was trying to avoid asking for help, but I honestly can't see what's wrong with my new install of arch.  I followed the beginner's guide all the way up to the part where you reboot and remove the liveCD.  It all went swimmingly until I rebooted and got:
    GRUB Loading stage1.5.
    GRUB Loading, please wait...
    Error 15
    I don't know what's going on.  Error 15 is supposedly "file not found," but I don't know what file it's looking for since I have a grub.cfg that I created from the steps posted on the guide.  Any help is greatly appreciated.
    --Wes
    EDIT:
    Just to be clear I followed the BIOS motherboard steps for GRUB.
    Last edited by Wesman26 (2012-11-09 01:25:38)

    Xacky wrote:Which instructions did you follow? This would normaly do it when chrooted (during install).
    Wat your disk en partition lay-out?
    -One or more harddisks?
    -Partitions? Everything on / or separate /home /boot (/var)?
    I'm following the beginner's guide instructions for a BIOS install.  After chroot I used the following:
    # pacman -S grub-bios
    # grub-install --target=i386-pc --recheck --force --debug /dev/sdb
    # cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
    # grub-mkconfig -o /boot/grub/grub.cfg
    Aside from the warnings (that I think most people ignored) of a few files not existing during the installation of grub-bios, it all went fine.  The harddrive is definitely sdb (fdisk -l shows sda as my windows drive, not to mention I just formatted and partitioned sdb).  My partitions are laid out exactly as the guide tells me to (/ on /dev/sdb1 and /home on /dev/sdb2).  They are the only partitions on sdb.
    DSpider wrote:Lol... a full reinstall wasn't needed. This mentality is typical to a Windows user.
    I don't appreciate your condescension.  These forums have (up to this point) always been really helpful and friendly to me; just because I'm posting in the newbie corner doesn't mean I'm not familiar with linux, and even if I were unfamiliar with linux I would hope that you could show more respect and compassion for someone who needs help than to ostracize them and laugh about their problem.  I posted here because I figured I didn't need to waste the time of the mods and users who offer help in the installation subforum with something that I assumed would be a trivial fix.  I expected courteous, thoughtful responses.  I was apparently wrong to assume.
    I reinstalled because I didn't know what else to do, and figured that there might have been a chance that I made a mistake.  Since your previous advice was literally getting me nowhere I figured the 10 minutes of my time reinstalling took up would be worth the potential of fixing my problem. 
    To answer your questions that are actually helpful:
    I don't have grub installed on another drive and my drive and partition layout is detailed above.  As for boot priority, it hasn't changed since I first installed linux in 2006 and it's worked ever since; I'm performing this operation to clear what was once a drive cluttered with a few other distros that I've abandoned since 2007 when I found Arch (yes I am actually that lazy).
    Is it possible that my old installation of grub might have stayed on the drive even after I rid it of the old partitions (since it's stored in MBR)?  If so does the installation of grub2 I'm performing not get rid of it?
    Hope this helps,
    --Wes
    Last edited by Wesman26 (2012-11-08 20:53:27)

  • New install I&M Presence

    I just want to clarify one thing. I am having issues with the presence install,  I have added the presence server to CUCM 10.5 Presence is 10.5,
    The book is a little confusing but really at the end of the day the versions must match and all you need to do to get CUPS installed is add it to CUCM as a CUCM I&M Presence server under the server tab on CUCM.  I have been trying to get this installed for hours now. Network is fine  I get the error message that says {You must add this to the CUCM Database"
    Am I missing something?

    Hello.
    I am installing a new cucm server and a new imp server. I have installed the cucm but when I try to install the imp I always get the same error (see the attached image).  I have added the new IMP server in the CUCM configuration (system -> server). I have tried using the fqdn, the hostname and the ip address of the new IMP server with the same result.
    And I have checked that dns resolution of the fqdn of the imp and the cucm is working.
    Both of the servers are in the same lan segment.
    CUCM version: 10.5.2.11900-3
    IMP version: 10.5.2.20000-1
    Any idea of why it does not work? The error I am getting is not very helpfull...

Maybe you are looking for