Q&A 1 When does PrepareModel() exactly execute

Hi
What is the default functionality of PrepareModel() and when is it executed in practical sense .. Every time the page is refreshed ? Can anybody name one single most appropriate usage to override this method
Regards
ammar

Ammar,
please try this
http://www.oracle.com/technology/products/jdev/collateral/papers/10g/ADFBindingPrimer/index.html
Frank

Similar Messages

Error in pricing when doing sourcing in EBP 4.0

Hello,
We're experiencing random errors when doing sourcing in EBP 4.0. The shopping carts don't seem to have any similarities that could launch the error. There has been few cases when the same error has occured when user is creating a shopping cart.
The problem occures when doing sourcing and the shopping cart is either being held or a PO is created. The error creates dump in ST22, "UNCAUGHT_EXCEPTION". This is somehow related to pricing and we have checked note 673372 and ran report BBP_CND_CUSTOMIZING_CHECK, all OK. IPC is running the same SP level as SRM, SP level 10.
We have already created an OSS about this, but as this is completely random we haven't been able to reproduce the error and no solution has been found.
Here's some data from ST22:
Transaction......... "BBPSOCO01 "
Program............. "SAPLBBP_PDH"
Screen.............. "SAPLBBP_SOCO_UI_ITS 2000"
The termination occurred in the ABAP program "SAPLBBP_PDH" in "BBP_PD_ABORT"
The main program was "SAPLBBP_SOCO_UI_ITS ".
The termination occurred in line 69 of the source code of the (Include)
program "LBBP_PDHU08"
of the source code of program "LBBP_PDHU08" (when calling the editor 690).
000600   * get the messages from the application log
000610     TRY.
000620         CALL FUNCTION 'BBP_PD_LOG_GET_MESSAGES'
000630           TABLES
000640             E_MESSAGES = LT_MESSAGES.
000650       CATCH CX_BBP_PD_ABORT.
000660         REFRESH LT_MESSAGES.
000670     ENDTRY.
000680
>     RAISE EXCEPTION TYPE CX_BBP_PD_ABORT EXPORTING
Thanks already in advance!
-Jussi

Hi
Please refer to following SAP Notes:
Note 860935 - pricing customizing exits are missing
Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
Also try to implement the latest IPC patches following the instructions from note 880749, then restart the VMC. It worked for us, after trying many things with no luck.
Alternatively, try this as well. There must be some problem with VMC. Most probably java connection problem. Please execute program RSVMCRT_HEALTH_CHECK in SE38 transaction. You should see green for all 4 messages in the result. Please contact your basis consultant and refer notes 854170 (and 844817)
<u>Other related OSS notes.</u>
Note 1024374 - Unexpected pricing error for pricing irrelevant item
Note 992259 - NullPointerException in Command GetFilteredCsticsAndValues
Note 860935 - pricing customizing exits are missing
Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
Note 854170 - Activating the component "VM Container"
Note 593109 - Short dumps UNCAUGHT_EXCEPTION in SRM 2.0 (EBP 3.5)
Note 880749 - Patching of VMC based AP 7.00 engines
Note 854170 - Activating the component "VM Container"
Note 844816 - Information for Upgrade from IPC 4.0 to SAP AP 7.00
Hope this will help.
Please award points if helpful.
Regards,
-Atul

Error when doing importing with impdp

Hi,
I tried to do export then import the schema from and to same schema. However, when doing export with expdp everything was okay.
Problem begins when I tried to do importing by using impdp. I also tried to drop the current schema and created the new one but it still doesn't work.
If I didn't drop the current schema, it logs looks like this
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
ORA-31684: Object type SEQUENCE:"HSS"."LCM-MIGRATION_ID-SEQ" already exists
ORA-31684: Object type SEQUENCE:"HSS"."WKS_IDENTITY_SEQ" already exists
ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_RESOURCE_SEQ" already exists
ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_LEASE_OWNER_SEQ" already exists
Processing object type SCHEMA_EXPORT/TABLE/TABLE
ORA-39151: Table "HSS"."HSS_COMPONENT" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."HSS_COMPONENT_LINKS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."HSS_COMPONENT_PROPERTY_VALUES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."HSS_COMPONENT_TIERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."ESS_CLUSTER_SERVER_MAPPING" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."HSS_COMPONENT_TYPES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."CSS_IDENTITY" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."CSS_GROUP_MEMBERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
ORA-39151: Table "HSS"."CSS_USERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
Job "HSS"."SYS_IMPORT_FULL_01" completed with 95 error(s) at 08:47:21
And then this is the log when doing importing, I only highlighted the necessary part which I think related with my problem
Starting "HYPSS"."SYS_IMPORT_FULL_01": HYPSS/******** TRANSFORM=oid:n:type directory=test_dir logfile=imptest.log dumpfile=HYPSS.dmp
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"HYPSS" already exists
. . imported "HYPSS"."CSS_ROLE_LOCALES" 1.630 MB 6358 rows
. . imported "HYPSS"."HSS_COMPONENT_FILES" 601.5 KB 33 rows
. . imported "HYPSS"."HSS_COMPONENT_PROPERTY_VALUES" 130.7 KB 1657 rows
. . imported "HYPSS"."CES_APPS" 10.54 KB 1 rows
etc....
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
ORA-39083: Object type INDEX_STATISTICS failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
DECLARE I_N VARCHAR2(60); I_O VARCHAR2(60); c DBMS_METADATA.T_VAR_COLL; df varchar2(21) := 'YYYY-MM-DD:HH24:MI:SS'; BEGIN DELETE FROM "SYS"."IMPDP_STATS"; c(1) := 'TRIGGER_NAME'; c(2) := 'TRIGGER_GROUP'; DBMS_METADATA.GET_STAT_INDNAME('HYPSS','QRTZ_TRIGGERS',c,2,i_o,i_n); INSERT INTO "SYS"."IMPDP_STATS" (type,version,flags,c1,c2,c3,c5,n1,n2,n3,n4,n5,n6,n7,n8,n
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
The source schema is on USERS tablespace (default). The destination schema I tried to put on the same tablespace but it doesn't work. However when I changed the destination tablespace, it also doesn't work.
Anybody got the idea why this occurs? Thanks.

got error like this
ORA-39152: Table "HSS"."CSS_GROUP_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_USERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_ROLES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_DELEGATED_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_ROLE_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_ROLE_LOCALES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-39152: Table "HSS"."CSS_GROUPS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-00001: unique constraint (HSS.COMPONENT_LINKS_PK_IND) violated
ORA-31693: Table data object "HSS"."HSS_COMPONENT_TYPES" failed to load/unload and is being skipped due to error:
ORA-00001: unique constraint (HSS.COMPONENT_TYPES_PK_IND) violated
ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists

Duplicates. I use iTunes match. When I run exact duplicates, I get duplicates that say uploaded for one and uploaded with a cloud for the other. Which one do I delete?

Duplicates. I use iTunes match. Two questions:
When I run exact duplicates on the library on my Mac Air, I get duplicates that say uploaded for one and uploaded with a cloud for the other. Which one do I delete?
Some of the duplicates say matched and matched with a cloud. Same question - which one should I delete?

I'm not sure I understand the question.
First I would update your iTunes match. iTunes match will tell you what is duplicates and then you can just delete them from the library.
Second, the course in a situation like this is to delete ONE duplicate and see what happens. Make sure you have that song backed up somewhere just incase it deletes it completely. But usually I'd delete one and then see if it deletes both or just the one you pressed.
Thirdly, update iTunes match. It usually does a good job of locating actual duplicates.

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?

Hey whl6868,
According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS. If Resman is returning valid values for it, then it must be actually reading the lines. Else, I would only expect it to return valid values when you actually call the function yourself.
Regards,
David R
Applications Engineer
National Instruments

Why or When should we use Execute Immediate in PLSQL??

Hi Frnds,
Long Ago i have received a interview question that ...
How can U create a table in the PLSQL object(Function or procedure)?
But the thing y should we use execute immediate?
In which scenario we should we should use????????????
Why or When should we use Execute Immediate in PLSQL????

OR
http://stackoverflow.com/questions/18375990/oracle-what-does-execute-immediate-means
For DML you'd use it when running statements that you don't have available at compile time, e.g. if the column list is based on a selection from the user.
In your case it's being used because DDL cannot be run as static SQL from within PL/SQL. Only certain query, DML and TCL commands are valid. Anything else has to be treated as dynamic.
I'd say it's rare to need to use DDL from a PL/SQL block. TRUNCATE might be reasonable; if you find anything creating or dropping objects on the fly then that might be more of a concern as it can suggest a suboptimal data model.
EXECUTE IMMEDIATE itself does not automatically commit; but if you execute DDL then that will behave the same as if you ran it outside PL/SQL, so it will commit in your case, yes.
Incidentally, I'm not sure why your code is using an intermediate variable to hold the statement; that's useful if you want to display what it's going to run maybe, but you don't seem to be doing that. What you have could be done as:
EXECUTE IMMEDIATE 'TRUNCATE TABLE BD_BIDS_EXT_DET';
Thank you

When does a value help in Java webdynpro 2004s get created automatically

HI All
when does drop down value help get created automatically (without coding) in java webdynpro NW 2004s application for a view field mapped to a abap dictionary like currency(Domain:waers) having a value table TCURC but has to be created for a field like UOM(Domain:meins) having a value table T006
the only differnce I can see in the 2 domains in my current set up is, meins has a conversion routine & wears doesnt
this is a question that applies to both java webdynpro & abap so please dont ask me to post it in another forum.
Im sure some one has asked this question before. please guide me!!
Thanks
Prasad

Question:
If I start a java thread from the �main� thread of
execution and that thread I just created finish�s
executing its �run� method is that threads resources
automatically clean up? Or do we have to do this
clean up ourselves?Depends which resources you mean. There's nothing special about threads in that respect.
Memory is automatically reclaimed when it is no longer reachable, so unless the run method set some member variables in some object that remains reachable after it completes, no worries there.
Files, sockets, etc. remain open unless you close them.

Spool is Missing When a Report is Executed through a JOB

Hi,
I had a task in which I have to Pick the Session Log from SM35 and print it when a Report is executed .In the Report I Created a Session using the SUBMIT.I used Perfrom statemet from RSBDC_ANALYSE programe and picked the Log.I got the Exact result when I executed the Report in Foreground but when i tried to Execute in background I could not Get the SPOOL.
Report Is executed as a JOB and in that Report a Session will be Created and then it is Executed as a job I picked the Log from this Session.
Can any one please kindly help me out with this issue.
Thanks & Regard,
Prasad.

WAIT UP TO 3 SECONDS.
DATA: Begin of PR_NEW,
         POSITIONSINFO(60),
         FEHLERTEXT(130),
        end of PR_NEW.
DATA: wa_bseg TYPE BSEG,
        wa_knb1 TYPE KNB1,
        wa_kna1 TYPE KNA1,
        wa_bkpf TYPE BKPF,
        wa_xblnr(20) TYPE c.
SELECT * FROM APQI INTO CORRESPONDING FIELDS OF TABLE it_apqi
                          WHERE groupid = GROUP
                          AND   credate = sy-datum.
READ TABLE it_apqi INDEX 1.
SELECT * FROM APQL INTO TABLE logtab_temse
                        WHERE qid = it_apqi-qid.
LOOP AT logtab_temse.
    clear bdcld.
    bdcld-temseid = logtab_temse-temseid.
    bdcld-lmand   = logtab_temse-mandant.
    bdcld-edate   = logtab_temse-credate.
    bdcld-etime   = logtab_temse-cretime.
    bdcld-luser   = logtab_temse-creator.
    bdcld-grpn    = logtab_temse-groupid.
    bdcld-quid    = logtab_temse-qid.
    bdcld-local_host = logtab_temse-destsys(8).
    APPEND bdcld.
ENDLOOP.
READ TABLE bdclm index 1.
perform read_bdc_log_plain IN PROGRAM RSBDC_ANALYSE
   tables logtable
   using bdcld-temseid bdcld-lmand.
LOOP AT logtable.
    clear bdclm.
    bdclm-indate = logtable-enterdate.
    bdclm-intime = logtable-entertime.
    bdclm+14(352) = logtable-logmessage.
    if bdclm-mcnt > 0.
      bdclm-mcnt = bdclm-mcnt - 1.
    endif.
    if bdclm-mnr = '312'.
      append bdclm.
    endif.
ENDLOOP.
LOOP AT bdclm.
    CLEAR wa_bseg.
    CLEAR wa_knb1.
    CLEAR wa_kna1.
    CLEAR wa_bkpf.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = bdclm-mpar+02(09)
      IMPORTING
        OUTPUT = wa_belnr.
    SELECT SINGLE * FROM BSEG INTO wa_bseg
                              WHERE belnr = wa_belnr
                               AND   bukrs = bdclm-mpar+13(04)
                               AND   buzei = '001'
                               AND   gjahr = sy-datum+0(4).
    SELECT SINGLE * FROM BKPF INTO wa_bkpf
                              WHERE belnr = wa_belnr
                               AND bukrs = bdclm-mpar+13(04)
                               AND gjahr = sy-datum+0(4).
    SELECT SINGLE * FROM KNB1 INTO wa_knb1
                              WHERE kunnr = wa_bseg-kunnr
                              AND   bukrs = wa_bseg-bukrs.
    SELECT SINGLE * FROM KNA1 INTO wa_kna1
                              WHERE kunnr = wa_bseg-kunnr.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
      EXPORTING
        INPUT = wa_bseg-kunnr
      IMPORTING
        OUTPUT = wa_bseg-kunnr.
    CONCATENATE 'Ref.doc.' wa_bkpf-xblnr INTO wa_xblnr SEPARATED BY space.
    PR_NEW-POSITIONSINFO+000(010) = wa_bseg-belnr.
    PR_NEW-POSITIONSINFO+011(19) = wa_xblnr.
    PR_NEW-POSITIONSINFO+031(004) = wa_bseg-bukrs.
    PR_NEW-POSITIONSINFO+036(006) = wa_bseg-kunnr.
    PR_NEW-POSITIONSINFO+043(004) = wa_bseg-zterm.
    PR_NEW-POSITIONSINFO+048(004) = wa_knb1-zterm.
    IF wa_bseg-zterm NE wa_knb1-zterm.
      CONCATENATE 'Terms of payment of Customer' wa_bseg-kunnr wa_kna1-mcod1
                   'was changed from' wa_knb1-zterm 'to' wa_bseg-zterm
                   INTO PR_NEW-FEHLERTEXT SEPARATED BY space.
      WRITE: / PR_NEW-FEHLERTEXT.
      WRITE: / PR_NEW-POSITIONSINFO.
      WRITE: /.
    ENDIF.
ENDLOOP.

WebDAV error when doing a client push ConfigMgr 2012 R2

Hi everyone, I am getting an error message when doing a client push, only on some DPs.
Here is the setup:
ConfigMgr 2012 R2 on Server 2012 R2.
DP are on Server 2008 R2 (for the most part).
DP are installed using the exact same way, adding the Primary Site Server to the local Admins group, then using the console to install the role, selecting BranchCache and Configure IIS.
No PXE.
Boundary groups are configured as appropriate.
When initiating a client push the following errors are displayed in the CCMSetup.log:
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
Failed to check url http://DPServerName.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005
Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
GET 'HTTP://MPServerName.com/CCM_Client/ccmsetup.cab'
The installation is done but yet again, no local DP are used.
The same scenario is actually working on other DP that was configured using the same exact way.
Servers where not new installation and where used for other things:
MDT Deployment Share with PXE.
Other share.
As far as I can tell, IIS is well configured as I am able to deploy any other software on clients and they are using the local DP. Only the client installation is causing problem.
Anyone have any idea?
There is a lot of post about a similar problem on ConfigMgr 2007 but all solution are to configure WebDAV, which is not configured in ConfigMgr 2012.
Thank you guys for any tip and/or help!
Mathieu

You are right about the log, here is a longer snippet of it:
==========[ ccmsetup started in process 5980 ]========== ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Running on platform X86 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Launch from folder C:\Windows\ccmsetup\ ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
CcmSetup version: 5.0.7958.1501 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
In ServiceMain ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Running on 'Microsoft Windows 7 Professionnel ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
SslState value: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPPORT: 80 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSPORT: 443 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSSTATE: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSCERTNAME: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
FSP: ServerSCCMPSS.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMFIRSTCERT: 1 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Retry time: 10 minute(s) ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI properties: INSTALL="ALL" SMSSITECODE="S01" FSP="ServerSCCMPSS.Test.com" SMSCACHEFLAGS="PERCENTFREEDISKSPACE" SMSCACHESIZE="20" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Source List: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmmp.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmpss.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\dcsspsccmmpdff.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMMP.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMPSS.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\DCSSPSCCMMPDFF.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MPs: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmmp.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmpss.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
dcsspsccmmpdff.test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
No version of the client is currently detected. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Updated security on object C:\Windows\ccmsetup\. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Sending Fallback Status Point message to 'ServerSCCMPSS.Test.com', STATEID='100'. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Failed to get client version for sending messages to FSP. Error 0x8004100e ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Params to send FSP message '5.0.7958.1501 Deployment ' ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
State message with TopicType 800 and TopicId {40FD8A62-3E9A-41FB-8698-E9A6658A4A91} has been sent to the FSP FSPStateMessage 2015-03-25 23:12:12 4536 (0x11B8)
Running as user "Système" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Detected 206206 MB free disk space on system drive. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Checking Write Filter Status. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
This is not a supported write filter device. We are not in a write filter maintenance mode. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=S01))' ccmsetup 2015-03-25 23:12:13 4536 (0x11B8)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>S01</RootSiteCode><CCM> <CommandLine>SMSSITECODE=S01 FSP=Serversccmpss.Test.com SMSCACHEFLAGS=PERCENTFREEDISKSPACE SMSCACHESIZE=20</CommandLine> </CCM><FSP> <FSPServer>Serversccmpss.Test.com</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="Test.com" /><Forest Value="Test.com" /></ClientOperationalSettings>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmpss.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmpss.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmmp.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmmp.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'dcsspsccmmpdff.test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'dcsspsccmmpdff.test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrieved 3 MP records from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrived site version '5.00.7958.1000' from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteCode: S01 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteVersion: 5.00.7958.1000 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for a valid online MP... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Checking the URL 'HTTP://Serversccmpss.Test.com:80/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'HTTP://Serversccmpss.Test.com:80/CCM_Client' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found a valid online MP 'Serversccmpss.Test.com'. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for DP locations from MP(s)... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Current AD site of machine is CDL LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Local Machine is joined to an AD domain LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Current AD forest name is Test.com, domain name is Test.com LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Begin checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Finished checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Adapter {72FC011A-9993-4CBD-B7B2-D1D56FD38711} is DHCP enabled. Checking quarantine status. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="S01"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="CDL"/>
<Forest Name="Test.com"/>
<Domain Name="Test.com"/>
<IPAddresses>
<IPAddress SubnetAddress="172.16.64.0" Address="172.16.65.9"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Sending message header '<Msg SchemaVersion="1.1"><ID>{B9F091E1-649D-47C4-A0AD-19508435F962}</ID><SourceHost>C006235</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:C006235:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>Serversccmpss.Test.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="1080"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
CCM_POST 'HTTP://Serversccmpss.Test.com/ccm_system/request' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received header '<Msg SchemaVersion="1.1">
<ID>{336667CB-2AF5-4B7D-9B1B-3B9A39777034}</ID>
<SourceID>GUID:8BB44537-8D62-4751-9114-1F5527EE800F</SourceID>
<SourceHost>ServerSCCMPSS</SourceHost>
<TargetAddress>direct:C006235:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<ReplyCapabilities><AllowRegistrationReset>direct:ServerSCCMPSS:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>C006235</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="2574"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">ServerSCCMPSS;Serversccmpss.Test.com;</Property><Property Name="MPSiteCode">S01</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003" Signature="http://CDLGHOST.Test.com/SMS_DP_SMSSIG$/S0100003"/><ADSite Name="CDL"/><IPSubnets><IPSubnet Address="172.16.64.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>CDLGHOST.Test.com</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL"/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="S0100003" FullPackageVersion="7" FullPackageHash="CE8C259380667F5687A01FA5365B2D2D1236BA9FC1AD4696A54D914B919D294D" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30416572;2153570688" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found local location 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Discovered 1 local DP locations. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Got 401 challenge Retrying with Windows Auth... ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to check url http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005 ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
GET 'HTTP://Serversccmpss.Test.com/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully loaded ccmsetup manifest file. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1501' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vcredist_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vcredist_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vc50727_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vc50727_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item
I did double checked with a friend about my configuration and everything, just to make sure, and everything seems to be right.
As for the use of account used to get the client, a domain join computer will not need to us the network access account if the DP is in the same domain and the same exact config on other servers is working like a charm deploying the client, same
security and configuration.
All default IIS security and share permission.
Thank you guys for your suggestion and help.
Mat

When does java deallocate memory for objects;

um i'm working on a midp application that is very memory consuming. i would like to optimise it and make it just the oposite of what it is. now i would like to know when does java dellocate memory for an object, is it when it can find no more references to that object? or some other time, well i know its not when it can find no more references to that object because i've already tried that.
or to make things simpler is there any explicit way to make java deallocate memory for a specific object, like if i have a thread, which is executing a while loop, and i want java to end the thread and free its memory. is there any way to do this?

I happen to have quite some J2ME experience and it's not overly wise to count on extensive garbage collection. The garbage collector in limited device VMs isnt as advanced as it's big brothers. Try to avoid excessive object allocation and reuse instances whenever possible.
As for garbage collection, objects will be garbage collected if they can no longer be reached by any of the active application threads and if the garbage collectors deems it necessary to collect garbage, which will probably be when free heap memory becomes sparse or when there's some idle time in your application.

Error Message when doing a Stock transffer using Mvt Type 309 using MIGO

Hi Team,
I am getting an error message M7-441 "Selection by multiple account assignment was not restricted", when doing a stock transfer.
I am not able to understand the exact issue here, any help is appreciated.
Regards
Raj

M7441 seems to be a new error message which came with EHP4
I can only see that it is used in MB51 report (do you search for material documents in MIGO when you get this error?)
according to the coding in my system this is just a warning message, not an error message, hence you could continue by cklicking the okay icon.

Can I purchase the Photoshop CS6 student version in this educational stage? When does it expire?

Hi! I'm from Spain. I'm in a educational stage that would be more or less equivalent to what you call high school. This stage here is called "bachillerato". Does anyone know if at this stage I have rights to buy and use legally the Photoshop CS6 Extended student version for learning and earning money with commercial projects like games with some elements made with that version of Photoshop? Please only answer if you really know the answer, please don't simply say "yes" because in other countries you can get the version because of beeing in high school, because this is not exactly the same as high school.
And, if I can get the license and use it legally that way: when does it expire in this to cases?
A) I don't go to University. Would it expire when I finish "bachillerato". Or when?
B) I go to University but I don't study anything related with Photoshop.
I know that if I study something related with Photoshop in University I can use the student version then.

I would contact Adobe España Customer support, as they should know the full qualifications for "educational" accreditations there.
As for the university qualification, one does not normally need to be pursuing a degree, that would use Photoshop, to qualify for the "educational" discount - just full student, or teacher, accreditation - but that might differ in Spain?
Also, for many years now, Adobe has removed the restriction on doing commercial work (for pay) with the educational version, and that should be universal, and not just limited to certain countries, but it might pay to ask that question of Customer Support.
Good luck,
Hunt

When i run my executable it gives error 7

when i run my executable it gives error 7
and this is the error messege:
Error 7 occurred at Invoke Node in PRC_Deploy.vi->Deploy Library.vi->Deploy SV2.vi->WSfrontpanel.vi
and can any one tell me how to deploy the shared variable libraries on my executable file
m.shair
Mahmoud Alshair
Intelligent Systems Integrator ( ISI )
System Developer
Solved!
Go to Solution.

Hi Mahmoud,
What are you doing at the Invoke Node? Are you calling a vi? If you are check this KnowledgeBase.
For deploying shared variables from your executable, check this KnowledgeBase.
Regards,
Hillary E
National Instruments

When does incompleteness of foreign trade matters for accounting document?

Hi,
When creating billing from an SO without delivery, the accounting document is created even though foreign trade data is incomplete.
While when creating billing from a delivery, the accounting document is not created since foreign trade data is incomplete.
My question is, When does incompleteness of foreign trade matters for accounting document?
Please advice.
Thanks!

Hi,
I donu2019t have an exact answer but I take a guess that, when creating billing from a delivery, the accounting document is not created since foreign trade data is incomplete - it might be because the necessary information for delivery is not maintained, for instance mode of transport for Foreign Trade, Domestic mode of transport (you can see them in billing doc u2013 header u2013 foreign trade/customs) most of the data maintained in material master.
Whereas for order related billing, these data might not be necessary as it has no delivery.
Note: This is just a guess.
Also take a look at the below link. It might be useful for you.
Re: foreign data incomplete appearing after deactivating
Good luck
Sats.

Error when doing GR

Hi,
when doing GR i am getting the error "Posting only possible in periods 2011/04 and 2011/03 in company code vksk"
i need your suggestion to rectify this

Hi,
It means the MM Posting period is not current, we define periods of posting, during which it is possible to do material movements.
If the date of the material movement does not fall into the period, this error will come up.
Please go to table MARV, Provide your Co Code and execute, you will find the current period of that Co Code, then you need to go to T code MMPV, Provide your Co Code and enter the next period say in MARV the period was 06, so now you need to open posting for 07, then please put period as 07 and years as 2011 and execute.
If there is a difference of more than one periods between the current actual period and the period in marv for the co code, then you would need to open periods one by one.
For example co code has period has3, and actual period is 7, then you would need to put period as 4 and execute, next time 5 and so on, lastly you will have to execute with7.
Hope this clarifies all your doubts, similarly, you will have to ask FI to open the FI posting periods as well.
Please let me know of any issues, would be happy to help
Regards
Shailesh

Q&A 1 When does PrepareModel() exactly execute

Similar Messages

Maybe you are looking for