When does incompleteness of foreign trade matters for accounting document?

Hi,
When creating billing from an SO without delivery, the accounting document is created even though foreign trade data is incomplete.
While when creating billing from a delivery, the accounting document is not created since foreign trade data is incomplete.
My question is, When does incompleteness of foreign trade matters for accounting document?
Please advice.
Thanks!

Hi,
I donu2019t have an exact answer but I take a guess that, when creating billing from a delivery, the accounting document is not created since foreign trade data is incomplete - it might be because the necessary information for delivery is not maintained, for instance mode of transport for Foreign Trade, Domestic mode of transport (you can see them in billing doc u2013 header u2013 foreign trade/customs) most of the data maintained in material master.
Whereas for order related billing, these data might not be necessary as it has no delivery.
Note: This is just a guess.
Also take a look at the below link. It might be useful for you.
Re: foreign data incomplete appearing after deactivating
Good luck
Sats.

Similar Messages

When does 11.1 itunes come out for windows.

when does 11.1 itunes come out for windows.?

ReallyAustin wrote:
Ummm.... Acctually I'm on windows aswell and it's not out for me either? It's been 12 hours since IOS7 came out and yet no Itunes 11.1 for the stuffs? Great!
Yes, it is out.
Millions have downloaded it.
(direct download links)
-> iTunes 11.1 for Windows XP, Vista or Windows 7
-> iTunes 11.1 for Windows (64-bit)

Foreign Trade data in Billing document

Dear All,
I have configured Foreign trade. For Header level Incomplete analysis triggered configured fields perfectly. But at Item level Incomplete analysis configured the below said fields with Field control as - 2 - Field ready for input - Incompletion check active .
Configured Item level these fields
Business Transaction Type for Foreign Trade - EXART
Export/Import Procedure for Foreign Trade - EXPRF
Statistical value for foreign trade - GRWRT
Country of origin of the material - HERKL
Region of origin of material (non-preferential origin) - HERKR
Commodity Code/Import Code Number for Foreign Trade - STAWN
It is triggering only below said fields only.
Export/Import Procedure for Foreign Trade- EXPRF
Country of origin of the material - HERKL
Commodity Code/Import Code Number for Foreign Trade- STAWN
Why remaining fields not triggered in Billing document Item level. What are the notes I need to apply / Check. As per this configuration Accounting document not generated, but I am not getting error message, which I have configured.
Please suggest what to do.
Regards
Kumar

Hi Mr.Lakshmipathi,
Thank you very much for your solution.
When I entered only Foreign trade Header Data, then Accounting document generated. After generation of Accounting document when I tried to enter Foreign trade Item level all the fields are in disabled mode. Is it possible to make it enabled mode by this user can enter required data.
How , I will come to know cross check required notes before starting any scenario.
Regards
Kumar

When trying to update apps it asks for account password but it doesn't show my account. Help!

When trying to update apps it asks for account password but it doesn't show my account ID, it shows my dad's. How can I fix this so I can sign in?

It sounds like the apps were purchased using your dads account, so they will have to be updated using that account.

BADI/EXIT for MIGO for accounting document posting

Hi
I am using MIGO where SAP post Mat Document and Accountying document.
This Uses FM 'MB_POST_GOODS_MOVEMENT < Include LMIGOKG1>, once this FM executed both MKPF and BKPF data gets filled . I can see tha data for MKPF in debug but I am not able to see data for Accounting Document.Even I cant see the Acc. document no assigned by SAP
I need to change some fieds for Acc. Document <BSEG-VBUND>
Can any one help me to find in which structure or table I can get data for Accounting document

am using the method POST_DOCUMENT,
am writing the code like..
sample code..
DATA: wa_mseg type mseg,
wa_mch1 type mch1,
wa_ausp type ausp.
loop at it_mseg into wa_mseg.
*select single * from mch1 into wa_mch1 where matnr = wa_mseg-matnr*
and charg = wa_mseg-charg.
if sy-subrc is initial.
*select * from ausp into wa_ausp where objek = wa_mch1-cuonj_bm*
and klart = '023'.
if sy-subrc is initial.
if wa_ausp-atwrt EQ 'ACCEPTED'.
continue.
else.
if wa_ausp-atwrt EQ 'REJECTED'.
call function 'popup_to_display_text'.
endif.
endif.
endif.
endif.
endloop.
when i debug ,i find no data in the mch1 table ..
any help..
thanx

Exit/Badi for Accounting Document

Dear Friends
Is there any user exit/BADI for accounting document. My requirement is quite simple which you would also faced in many implimentation. Client wants number ranges business area/plantwise. I was just thinking as plant/business area is a line item field it may be little difficult to have different number range controll at that level, so I thought we could use user id as the import parameter. But these is possible once I get any user exit/badi for number range change. We dont want to create so many document type also.
Thanks and Regards
Pankaj Gupta

Hi Marta,
Check these notes
SAP Note 1259505 - FAQ: New cancellation procedure in SD,
SAP Note 400000 - FAQ: Transaction VF11: Cancellation of SD billing documents
See with attention note 1259505 question 4. It says
Most of the userexits in the SD-FI interface (see note 301077) will not be
performed.
So, try to do it with BTE's
Sorry, try with USEREXIT_PRICING_COPY in program RV61AFZA.
I hope this helps you
Regards
Eduardo
Edited by: E_Hinojosa on Nov 21, 2011 9:15 AM

Change profit center for accounting document on item line

HI
I need to change profit center for accounting document on item line, for that purpose I have used user-exit EXIT_SAPLV60B_004, but my new profit center gets latly overwritten in FM CO_DOCUMENT_CHECK (which is called from FM AC_DOCUMENT_CREATE). It gets overwritten from COBL. Is there any way to solve this?

HI,
possible reasons are :
In GR document profit center pulled from PO Material :
If you have ordered with material code, must check profit center assigned into material by mm03/Plant Data2
If you have ordered without material code, than check cost center assigned Profit center by 1KE4

BAPI for Accounting Document Posting

What is the name of BAPI for Accounting Document Posting and how can I run it?

Hi ,
Can you send me the code how to use the BAPI_ACC_DOCUMENT_POST.
Regards,
L Srikanthan.

Table for Accounting Document of Invoice Document

Dear All,
We have accounting doc. table of material document as BKPF(HEADER) & BSEG(ITEM).
In the same way, can any one share, whats the accounting doc table for Invoice/MIRO??
Regards
Mahesh
Re

Hi Dear
actually what table you have mentioned in your thread that table is for Accounting document, it doesn't matter whether the accounting document is created during good receipt or Invoice receipt
hence BKPF and BSEG is accounting table for invoice as well
Thanks

No. range for accounting document

Hi Friends,
I want to assign a new no. range for the accounting document. Can you tell how can I do this.
Regards,
Wasim.

Dear Check below transaction for accounting document types and defining number ranges as per document type and period.
OMBA-Document types
OBF4-Change document types
FBN1-define number ranges
SNRO - Object type number ranges
Cheers
KK

Incomplete Foreign Trade Data in Billing document....

Experts,
I am using a scenario which is order related billing and the item cat is TAP....while processing(Saving) the billing document I am getting an error nessage saying foreign trade data is incomplete.....I got couple of question regarding this...
1)Since its a domestic sales where end customer belongs to the same country of the Company code why is it foreign trade data is required?
2)Where the incompletion procedure is maintained?.....I have gone through VI29 & VI49 there are no entries exists.....
3)what kind of solution is available for this scenario?.......
Thanks in advance......

Hi Kumar S,
1)Since its a domestic sales where end customer belongs to the same country of the Company code why is it foreign trade data is required?
system will not check for the company code country instead it will check for the customer country & plant country. if it differs then only export data determination will come into the picture. as you said its order related billing. check the copy control settings from order - billing.
Determine export data.
Note: check the address maintained in Plant. Plant data may not changed when copying from other plant.
2)Where the incompletion procedure is maintained?.....I have gone through VI29 & VI49 there are no entries exists.....
this incompletion procedure generally assigned to country. as you are not dispatching . this doesnt have any impact.
3)what kind of solution is available for this scenario?.......
check for the default settings to determine export data, in case of export sales only . Tx:VI95.
Hope it helps.
Regards,
Reazuddin MD

Foreign trade data for MMR&CMR

Hi All,
Is it manditory to create the MMR with Foreign Trade/Export dara tab for Export Materials, if we select this for what are all settings we have to do.
I am getting an error while doing the billing "DOCUMENT XXXXX HAS BEEN SAVED (FOREIGEN TRADE DATA INCOMPLETE"
bcz while creating the MMR I have selected the Foreign Treade/Export data tab.
And similarly while creating the CMR for Exports is there any tab/field I need to take, if so plz inform me.
Thanx&Regards,
Ramu

Hi Ramu,
While creating Entries if you try to attach Procedure which is not defined for the Country SA then system will give you this error.
Do as Follows:
IMG - SD - Foriegn Trade - Basic Data for FT - Define Procedure & Default values.
First Define Procedure for teh Country.
Then add new entry in Procedure Default. While adding note that in case of Default value for procedure, system gives you option to select from allowed procedure.
These procedures are the one you maintained earlier.
If the procedures are not linked then it will give error
"Entry SA 02 does not exist in T616 (check entry)"
Hope this help you.
Regards,
Dnyandeo H. Ainarkar

Problem when creating contract with foreign trade / customs

Hi,
I encountered a problem when creating contract / outline agreement.
I used ME31K to create a contract with a vendor outside of our country. I suppose that I should be able to see "Foreign Trade / Customs" in "Header" menu, but this entry is gray, I cannot enter it.
I tried to create a scheduling agreement using ME31L with the same vendor and material, I can see "Foreign Trade / Customs" information. I suppose these two process are similar, aren't they?
Btw., I checked the master data according to this thread:
http://help.sap.com/saphelp_46c/helpdata/en/ed/3b6cc697e711d1b4e20000e82d81b0/content.htm
Can anyone give me some hint?
Thanks!
Charlie

These two processes are different:
The Contract agreement or the Outline Agreement is that create the centrally contract (cross-plant) where it can maintain different pricing conditions for each and every plant. It creates the Release Order with reference to Outline Agreement. No detailed delivery schedule can be made in the Release Order. No Release documentation is created. Only time-dependent conditions can be created, Some Item Category 'M' and 'W' can be used.
Whereas the Scheduling Agreement is the Plant Location what must be entered in the Scheduling Agreement. Its no need to create any other purchasing document except for delivery schedule line via Transaction ME38 or MRP running (with the appropriate setting of Source List). Delivery Schedule line items are created subject to your specific requirement. It can create both Scheduling Agreement with or without release of Documentation (subject to the Document Type LP or LPA) with the selection of either FRC or JIT delivery schedule. Either time-dependent or time-independent conditions can be created subject to the customizing in the Document Type of the Scheduling Agreement. Item Category 'M' and 'W' can not be used.

HT4623 Does apple offer any "trade-in" for Ipad 1....are we stuck forever at OS 5.1?

Does Apple offer any trade-in value for those of us early-adopters who bought the first version of ipad??? Are we forever stuck at OS 5.1 as OS 6 is not supported on the original Ipad?

Your only option is to sell the iPad and buy a new one.
How to Sell Your Old iPad http://tinyurl.com/85d69lk
Other sources to sell.
eBay Instant Sell http://instantsale.ebay.com/?search=ipad
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
 Cheers, Tom

Turn off foreign trade in SD billing documents

Is there a way to turn off foreign trade for the SD billing documents.

Hello,
I believe there is a way to turn off foreign trade based on item category.
SPRO --> Sales and Distribution --> Basic Functions --> foreign trade. I believe in this you have some setting to deactiate foreign trade based on item category.
Prase

When does incompleteness of foreign trade matters for accounting document?

Similar Messages

Maybe you are looking for