QFS mount options not getting noticed.

Hi I have a small issue it seems that none of my QFS directives are getting noticed im not sure if this is true or not but this is what I have tried and i am unable to verify that these mount options are actually taking effect..
This is QFS Version 4 revision 4.0.26FA
in my /etc/opt/SUNWsamfs/samfs.cmd I have the following options
fs = qfs1
nosuid
sync_meta = 0
qwrite
readahead = 4096
writebehind = 1024
after mounting my file system why are these options not listed in mnttab
qfs1 /qfs1 samfs dev=1d80036 1048280993
using dd/time to write data to this file system im getting the exact same performance no matter what options I set. another reason why I think these options are being ignored is the following
if I set for example fs = qfs1 and high = 70 low = 30 when I check samu [m] option I dont see those values reflected in the m output so what im asking is there anyway to verifty that my mount options are being set occordinly ?
Yes I did use mount -o nosuid,qwrite,etc.. /qfs1 still no difference and even placing the options in vfstab seems to not make any difference.
last but not lease if i do a samtrace -V while mounting my /qfs1 filesystem I see the following
00100000 readahead (1048576) <<--- still seems to use the default values 1024
00080000 writebehind (524288) <<-- 512 look @ my samfs.cmd file this should but not the value.
Any assistance would be nice.

Hi There! Sorry, it took so long to get back to you. This should help:
The samu N display shows all the mount options. You can also use the samfsinfo command to see file system build information. If the samfs.cmd options are not being picked up, make sure the file is formatted correctly (no odd characters) and is in the proper location, /etc/opt/SUNWsamfs/samfs.cmd . Then "pkill -HUP sam-fsd" to assure the daemon has picked up the file's contents, and then mount the file system.

Similar Messages

Fstab nfs mount options not used

I mount an nfs4 share from fstab with this;
192.168.1.250:/ /mnt/SERVER_NYTT nfs rw,hard,async,intr,rsize=49152,wsize=49152,proto=tcp 0 0
What I get is this;( $ mount:)
192.168.1.250:/ on /mnt/SERVER_NYTT type nfs4 (rw,relatime,vers=4,rsize=32768,wsize=32768,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,clientaddr=192.168.1.251,minorversion=0,local_lock=none,addr=192.168.1.250)
As you see rsize and wsize isn't correct. Mounting manually with
mount -t nfs4 -o rw,hard,async,intr,rsize=49152,wsize=49152,proto=tcp 192.168.0.250:/ /mnt/SERVER_NYTT
does give the correct result. Amongst other things I tested my gigabit network for nice rsize and wsize as shown in the manual command above, but they're not used from fstab it seems. 32768 is the default for nfs4.
I see nothing in the logs and export from the server can't change these options, as far as I understand 'man export'. Nothing in the arch wiki about this either.

Above note does not apply to backup location. Just it should be able to write and read from backup location. I/O speed should be good otherwise it becomes nightmare.
regards
Pravin Takpire

Validity option not getting displayed in Bank Information ESS

Hi Experts,
Can you please advise how to enable the validity option in the screen for bank bank information. Currently ESS->Personal Profile->Bank Information->Add other bank there is no option to specify the date range eg : create a bank record for a future dated record ( screen shot attached). My understanding is this option is part of the standard and should come towards the bottom of the screen.
I have checked the FPM_FORM_UIBB->HRESS_CC_PER_DTL_BANK_AU and it seems all okie. Can you please advise.Your help is highly appreciated.
Cheers,
Shyam

Hi All,
Got the solution. The view V_T7XSSPERSUBTY was not maintained correctly. Thanks.
Cheers,
Shyam

Video option not getting enabled in itunes

hi, in my itunes properties, when i go to the video tab...i have a problem, i cannot enable it, it wont let me do it, it is not highlighted, so i am unable to upload videos to my ipod, what shud i do. thanks.

Just to check, are any of the videos labeled as TV Shows?
Videos Labeled TV Shows Don't Appear on iPod
Also, is all of the software up to date?
iTunes
iPod Updater
Updating iPod's Software
btabz

TS3276 OSX Mavericks Mail : I configured Yahoo! id in OSX mail, I noticed that sent mails are stored on Mac and not getting stored on Yahoo! sent (server) although I gave the option to store on server in preferences, is there any solution?

I configured Yahoo! id in OSX mail, I noticed that sent mails are stored on Mac and not getting stored on Yahoo! sent (server) although I gave the option to store on server in preferences, is there any solution?

Found solution of forum...

Why do I not get the checkout option when clicking on the document link in the SharePoint workflow task?

We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.

No the person who can check out using the link in the email has the same permissions as me. We have looked at all kinds of settings, profile etc and nothing evident can be determined to explain the reason. However, one difference we did notice is that this person does not have a default web browser set and thus when clicking on items to open, it always pops up a dialog box asking which program to use to open it with. This person chooses Adobe Reader and it opens on the Sharepoint server as it should and she gets the checkout option in a dialog box just like clicking on the document in the library. My theory is that this step of choosing the program to open with is interrupting the typical way a pdf file is handled when clicking on URL links to the document, which is…. it is opened as temporary internet file rather than on the Sharepoint server. Hopefully someone can figure this out ☺

Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please help me.

Hi - Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please suggest how to over come this problem.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Did you make sure that your security software isn't blocking the pop-ups?
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

Adobe creative Cloud photshop cs 6 register user iam not getting COPY CSS options please help

iam adobe creative cloud photshop cs 6 register user iam not getting COPY CSS options even i have updated photoshop several times
still not getting this options please help
Thanks
Koushik

13.0.1 is the last version of Photoshop to run on Windows XP but it does not include the Copy CSS feature.
The Copy CSS feature was first introduced in Photoshop 13.1 (Cloud only) and higher.
http://blogs.adobe.com/jkost/2013/02/copy-css-attributes-in-photoshop-13-1.html
Photoshop 13.1 does not run on Windows XP. So your operating system is preventing you from upgrading Photoshop to 13.1+.
http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
If you plan to remain a Cloud member then you will have to upgrade to Windows 7 or Windows 8 (or get a new computer) very soon in order to run Photoshop CC to be released on June 17, 2013.

Not getting the option to install creative cloud. Only trial version or choose new plan

Hi,
I'm trying to install Photoshop on a second computer. Problem is I can't find the installer for Creative Cloud. When I log in at adobe.com and go to products, all i get is the option to get a trial version or sign up for a new plan. It's like it thinks I'm not already on a plan.
Explicitly going to menu -> pc apps -> clicking the creative cloud icon takes me to the general creative cloud promotional page. I can't see any option to just install the creative cloud app.
Am I missing something? Seached the forums and all the replies just tell me to go to adobe.com/products and install.

Oh, it was that simple?
Tried it and it worked just like you said. It's downloading now. Thank you so much!
Got to say that's a bit of baffling gui design. One would think a link to install Creative Cloud would be one of the main things needed for the account page on the website. Not only did I have to do something I didn't want to do (get the trial), but after installing the manager, it immediately started downloading and installing photoshop. I really hope it's not installing the trial version. I guess I'll have to wait and see.
Regardless, that solves this question. Again, thanks for the quick help. Have a nice day!
/Alex

Pricing: New condition type not getting listed in options in product master

Hi,
I have created a new pricing procedure and also created a new condition type for it. I am trying to create a condition record in the product master for this condition type but the condition is not there in the list of conditions. How can I inlcude it in the condition list?
Even the new condition type I have created by copying 0PR0 is not getting listed in the options, whereas 0PR0 is getting listed.
Regards,
Meenakshi
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:27 AM
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:29 AM

Hi Meenakshi,
you need to enhance the condition maintenance group in the customizing, which is assigned to the product master. Please check: IMG: Customer Relationship Management -> Master Data -> Products -> Special Settings for Sales Operations -> Assign Condition Group to Application CRM and IMG: Customer Relationship Management -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Maintenance Group.
Best Regards,
Michael

The html select box option is not getting displayed properly in IE11

The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some error

Hi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke

Select-option value is not getting captured in at selection-screen on value

In Selection screen , we have Select-option and a parameter.
Based on the values given in Select-option, the values of Parameter should get populate.
To achieve this functionality,
I used At selection u2013screen on value request for <parameter> EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
But the Select-option values are not getting captured in this event,unless u press Enter key.
Is there any other way to achieve this functionality.
Please Guide me.

When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
Jonathan
data:
    l_repid             type syrepid.
l_repid = sy-repid.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      dynpprog         = l_repid
      dynpnr           = '1000'
      dynprofield      = 'S_FIELD-LOW' "Select options - low value
* etc

I used the wrong password for my belkin wifi. Now that I know the correct password I can not get pass the unable to connect or join message. I have turned off all the options such as wifi and join and also put my touch to sleep.. but nothing seems to work

I used the wrong password to join my new belkin wifi. Now that I have the correct password, I can not get the to the join screen with the space to type in the password. I continue to get the unable to join message. I have put the touch to sleep and I have turned on and off the wifi and join options on the Network screen page. Does anyone know how to get pass this block of the wrong password to a new page that will allow me to type in the correct password. I see there is a option that asks if I want to reset the network settings.. is that what I should do? and what does it erase when I do that? Thanks for any input anyone has.

Yes. Reset network settings. Head to Settings -> General -> Reset and tap Reset Network Settings.
B-rock

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

Rich text box used in Infopath Form not displaying option to get images from Computer

Hello,
We have used "Rich text box" in Infopath Form which is not displaying option to get images from Computer.
Options available are : From Address, From SharePoint
But if we Rich text box in list, then it works fine with "From Computer" option.
can you please help me out to get this option.
Thanks in advance.
REgards,
Jayashri

Hi,
From your description, there is no “From Computer” option to get images with rich text box in InfoPath form.
Per my knowledge, by design there are “From Address” and “From SharePoint” options without “From Computer” option in rich text box in InfoPath form. As a workaround, you can develop a custom InfoPath Rich Text box to do it.
About developing a custom InfoPath control, I suggest you create a new thread on the forum “Visual Studio Tools for Office”, more experts will assist you with InfoPath development.
Visual Studio Tools for Office:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
Thanks,
Dean Wang

QFS mount options not getting noticed.

Similar Messages

Maybe you are looking for