QNX 6 driver for GPIB-PXI

I'm using NI-488DDK package to port a GPIB-PXI driver
on a QNX 6 system (x86). Only the Digital Unix driver
seems to be usable for me but there is a lot of difference between Unix and Qnx low level programming.
Is there a way to ease my development ?
Thank you

Good idea, I'm not sure of the result, but... Here is the zip file (aviable here).
(oups, you were faster ^^)
Message Edité par Mathieu R. le 12-08-2006 05:19 PM
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.  
  CTD - Certified TestStand Developer / Développeur TestStand Certifié  
  CLAD - Certified LabVIEW Associate Developer  
Attachments:
npmm4000.zip ‏419 KB

Similar Messages

  • I need a win2000 video driver for a PXI - 8170

    Where do I find a video driver for a PXI-8170 embedded controller running Windows 2000 Professional?

    Hi,
    The drivers for PXI and VXI embedded controllers can be found at http://www.ni.com/support/vxi/vxi_perph.htm. Simply select the link for PXI-8170 or scroll down to the PXI-8170 section.
    Regards,
    David Shatila
    Applications Engineer
    National Instruments

  • Is there a driver for the PXI-8310 that works with Windows 7?

    The only one I can seem to find is for XP.

    Hello LouisTI,
    Unfortunately there is not a Windows 7 driver for the PXI-Cardbus8310, as this is a legacy device which is currently going EOL (End of Life). The XP driver for the 8310 (which you may already have found) can be downloaded here:
    http://joule.ni.com/nidu/cds/view/p/id/370/lang/en
    If using Win 7 is critical, we recommend the PXI-ExpressCard 8360 as a replacement for the 8310:
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/202294
    Hope that helps!
    James M.  |  Applications Engineer  |  National Instruments
    James M. | Applications Engineer | National Instruments

  • How should i modify the hp54600a instrument driver for GPIB so i can use it for RS232 interface ?

    I try to modify the hp54600a instrument driver for GPIB, so i can use it with RS232. But somehow it didnt work. When i try to run the initilize it, the prgoram show VISA read error (time is up before the process is finish). How should I modify the VI so I can use it with RS232 interface ?

    First, check the instrument's user manual to see if the GPIB and serial command sets are the same. Also check to see what EOS(End of String) characters the instrument requires. Then, do a loopback test to test communication in LabVIEW.
    Search Results: Serial Loopback Test
    Ray K
    NI Applications EngineerMessage Edited by Molly K on 02-18-2005 10:57 PM

  • Is NI-FGEN 14.0 the latest driver for the PXI-5402?

    I have just had LabVIEW 2014 installed on my PC and then I reinstalled NI-FGEN 14.0 but I believe it said there was either a patch/service pack or newer version available. Is this correct or is 14.0 the latest FGEN driver?
    Solved!
    Go to Solution.

    Hi Dave,
    As of today, this is the latest version: http://www.ni.com/download/ni-fgen-14.0/4824/en/
    If you aren't sure if you have installed the patched version of 14.0 you can try to install the one above. Also you can use the NI Update Service to determine if you need to instsall the latest version or not.
    Regards,
    Jason L.
    Product Support Engineer
    National Instruments

  • IVI-C driver for PXI-2532

    Hi,
    Does anyone know where I can find the IVI-C driver for the PXI-2532 card?
    Thanks,
    Isadore

    Hi Isadore,
    I'm providing another link to the latest NI-Switch driver version (NI-Switch 3.8) as of 9/12/08:
    http://joule.ni.com/nidu/cds/view/p/id/1118/lang/en
    Hope this helps!
    Chad Erickson
    Switches Product Support Engineer
    NI - USA

  • Nigpib-linux-0.6 GPIB software driver for Linux and PXI GPIB board

    My I use nigpib-linux-0.6 GPIB software driver for Linux in a Compact PCI system running linux and equipped with your PXI GPIB board ?
    Thanks.
    Paolo Santinelli.
    [email protected]

    If you alter the device ID of the device from c801 to c821 within the driver module, you should be able to use the driver with the PXI board.

  • Where can I find GPIB drive for Stanford SR830 lockin amplifier for labview 6?

    Hi I am trying to work with the lockin amplifier (Model: Stanford Research SR830). Unfortunately, my computer only has labview 6 installed. Could you please let me know where I can download a SR830 driver of GPIB version for labview 6? I have checked the NI website. Only drivers for LabVIEW 8.0 and up are available here. http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=240C113D3165071BE0440003BA7CCD...
    Please let me know. If any one could upload one, that would be so great. Thank you.

    Hi Wayne,
    I am assuming you obtained the drivers from ni.com/drivers webpage? You can ask someone to convert it for you on the version conversion board and you should be good to go. If you create a new thread there please post the link to it over here so we can continue assisting you. Thank you and good luck!
    Regards,
    Basil
    Applications Engineering
    National Instruments

  • I have found a person who has a driver software to connect Labview with PCI card. But he says that i need to download a freeware software to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ??

    I have found a person who has a driver software to connect Labview with a general PCI card. But he says that i need to download a freeware software from NI website to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ?? Is there any other way out ??

    I would ask the person who told you about the freeware software to help you find exactly where it is. I am not aware of any freeware software for configuring motion PCI cards but maybe the person you know might be able to help you locate it.

  • What file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

    what file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

    Hi,
    Multiple files are required for the proer fnctioning of any of our GPIB products. Unfortunatly the installation is not as simple as copying a single file over. If you wish to make the installer silent, i believe this is entirely possible in a fashion similar to the details given at http://digital.ni.com/public.nsf/websearch/0730A66245E6808086256CA8006E2183?OpenDocument.
    Hope this helps out!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • GPIB driver for NEC omniace RA1100

    Hello,
    I want to control a NEC datalogger omniace II RA1100 via GPIB. Does anybody know where I can get the LabView driver for this instrument?
    I didn't find them neither on ni.com nor at the NEC website.
    Many thanks in advance,
                                 Magnus

    Hallo Jens,
    kann es sein, dass die Schnittstellenparameter nicht gesetzt sind? Die Parameter für die Schnittstellen werden in der Datei GfSUDI.UDI im DIAdem Programmverzeichnis verwaltet. Falls die Datei nicht existiert, kann die im Attachment vorhandene UDI-Datei in das Diadem Programmverzeichnis kopiert werden. Die Adresse und der Kartentyp müssen mit der Karteneinstellung übereinstimmen.
    Ich hoffe das hilft weiter.
    Gruß
    Walter
    Attachments:
    GfSUDI.zip ‏1 KB

  • Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

    I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

    Hi,
    There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
    Multi-Environment Certified IVI Instrument Driver
    Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
    The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
    Try LabVIEW 7.1 FREE Online
    If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
    -John M

  • Where can I find the driver for PCI-GPIB drivers for Windows XP

    We have PCI-GPIB cards work well under Win2k Pro and WinME, but when we try to mount the card to a WinXP machine and install the same driver as used under Win2k, and whenever I try scan instruments in Measurement & Automation, the system crashes and dumps the memory.
    Is there a specific driver for PCI-GPIB working under Windows XP? Thanks

    Hello,
    I don't know what GPIB driver version you have but you can go to the following webpage in order to get the latest GPIB driver (version 2.0) available.
    http://www.ni.com/support/gpib/versions.htm

  • Where can I download labview GPIB driver for Electroglas 2001 wafer prober?

    Need a copy of Labview GPIB driver for Electroglas 2001 prober. Please let me know where I can download it.
    Thanks.

    Hi,
    All the Instrument Drivers NI has can be found at the Instrument Driver network:
    www.ni.com/idnet.
    I searched for the instrument you are using and I couldn't find anything on it.
    In this case, you can contact the device manufacturer to see if they have a library. If not, you'll need the command set of the instrument. With the command set you can then use the VISA VIs to sent these commands and receive any data from the instrument.
    DiegoF
    National Instruments.

  • Where can i find driver for ethernet device for PXI-8175 for windows 2000?

    Ethernet driver for PXI-8175

    Hi
    Usually you can find the driver in the "image" folder on the controller, but you can it download from this site too (NI 8175 Series):http://www.ni.com/support/vxi/vxi_perph.htm#pxi8171
    Luca P.
    Regards,
    Luca

Maybe you are looking for

  • SWAP COLUMNS AND ROW IN AN INTERNAL TABLE to display in ALV

    Hi , I want to swap all the rows in an internal table with the column of the internal table to display it horizontally in ALV grid. e.g 1     2   3  (field names) A    P   X B    Q   Y C    R    Z should look like : D       A   B     C E      P   Q  

  • Cannot remove awful album

    Hi, I have one time bought an album for someone else. And so the album was on my Itunes library. Bus since I don't particulary like the album myself I have tried to delete it from my iTunes Library. But it keeps coming back, also on my Iphone. I hate

  • How to check the progress of a BPM process I started ?

    Hi, I used to build workflow with Guided Procedure, and there is a GP Runtime Workcenter where a user can find the processes he/she started, or being as an admin/overseer/owner. For GP, it is much more powerful than UWL. Now I'm testing BPM with the

  • URGENT!! Strings - Please help

    Hi I am urgently requiring help here. Any help would be greatly appreciated. I have a string: <clip clipID="{F46F8F95-DB46-4ECE-A44E-5906C7CC60EE}" originalFileName="009033d.rm" I need to find the string inside that starts with the first { and ends w

  • Oracle Determinations Engine Data Source Connector for Batch Processing?

    I have been trying to find +"Oracle Determinations Engine Data Source Connector"+. I have OPA 10.2 installed. Where can I find this in the installation directory? or Does it not come as a part of the standard installation?