QoS Setup for Whatsapp and VOIP application

Hello guys,
I own a WAG320N modem. I wasnted to setup QoS priority for 2 applications "Whatsapp" and a VOIP application which allows me to call from a computer to a mobile phone. I use torrent applications and they take all the bandwidth. Hence i was looking to configure QoS for these two applications.
I went to the QoS page and they are asking about the application details such as port range etc. I don't know what value to be filled. I have posted a screenshot below of what its asking. Can anyone help me fill these details for both applications.
Thank you in advance
Image: http://i40.tinypic.com/2qi02z5.jpg
Solved!
Go to Solution.

You can basically add Viber on the QoS. Under Applications and Gaming, click on QoS then enable the Internet Access Priority. On the Catergory, look for Applications>Add a New Application. Then you can enter the name of the Application. You may now add the port numbers. And since it's a specific port and not range, you do it this way;
   5242 - 5242 TCP (for the protocol)
   4244 - 4244 TCP
   5243 - 5243 UDP
   9785 - 9785 UDP
Hope this helps.

Similar Messages

Technical: QoS setup for STB when NOT using Actiontec DHCP

This is way over the heads of the phone support people so I thought I would post here and see how it goes.
I run a Server 2003 domain at home. When I had FIOS TV installed we were not able to get the STBs working properly without reseting the Actiontec to defaults and using it for the DHCP server. This caused many problems with my domain member PCs and I ended up having to statically address them. Unfortunalty, the DHCP server in the Actiontec is terrible and Ive had to reboot the unit several times when my PS3, PSP, Wii, and other non-domain/non-static devices connect, (It also affects the STBs at times and both the router and the STBs end up needing reboots.)
After a bit of looking and a bit of experimenting I was able to disable the DHCP on the Actiontec and go back to DHCP on the Windows Server. My domain is working great again. The STBs are working great (although you HAVE to create reservations that give them IPs starting with 100 or the will NOT work). All the other devices get IPs quickly and work everytime. Yeah!
Now for my question. When the Actiontec was assigning the IP, the STBs seemed to automagically get a QoS setup in the Actiontec router. When the Windows Server assigns the IP there is no QoS setup to be found. While I understand why this occurs, I really don't know if there will be an adverse side affect. On demand seems to be working fine, but I don't use it much and don't know if I'll have issues when the "network" is experiencing congestion. If the QoS setup is important, can anyone give me the details on how to implement the setting manually in the router?
Thank you...
-ak

tsk,
Yup....that explains how it know to address them with 100-110, but also explains why I saw a QoS setup for them when using the AT for DHCP. This weekend Im going to switch back to AT DHCP and make note of what I see. I know Im not crazy, there was something there, I just didn't think to write it down before I made the changes.
I am also in agreement that these change most likely will NOT affect VOD unless something else has gone wrong.
-Andy

Public Webinar: OPA for Licensing and Permitting Applications in Public Sector

All,
You may be interested in the following public webinar, to be held on January 29.
Best,
Peter Still
Executive Director, Policy Management and Strategic Decisioning, Oracle
1/29 Introducing an Oracle e-License and e-Permit Wizard
Making it easy to do business with government
Wednesday, January 29 | 11:00 am PT / 2:00 pm ET
REGISTER NOW
Due to complex local government license and permit rules, citizens often find it difficult to start a business or to build or extend a property. Meanwhile, cities and counties are more reliant than ever on license and permit revenue to fund their operations. They also need to ensure public health and safety in areas that include food preparation, use of hazardous materials, and other areas of professional regulation.
To combat these challenges, cities and counties are focusing on ways to better advise citizens and drive new economic development.
Oracle’s e-Licensing and e-Permitting Citizen Service Solution:
Reduces citizens’ and businesses’ confusion about the licenses and permits they are required to hold
Alleviates governments’ concerns about lost revenue and public safety risks due to non-compliance
Creates a cross-channel approach to promote business and professional license/permit programs
Enables a “one stop” portal where citizens can seek personalized, real-time, automated advice, about the licenses/permits they require, with personalized fee calculations
Provides an easy-to-use interface that can link to existing back-end license/permit application processes
Join us on Wednesday, January 29th at 11am PT/2pm ET for a webinar which will showcase the interactive and highly personalized citizen service approach that Oracle offers for licensing and permitting applications, focusing on the dynamic advice capabilities of Oracle Policy Automation.
The webinar will discuss real-world licensing and permitting scenarios and will include a government case study.
REGISTER NOW
Copyright © 2013, Oracle. All rights reserved.
Contact Us | Legal Notices and Terms of Use | Privacy Statement
Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States
Your privacy is important to us. You can login to your account to update your e-mail subscriptions or you can opt-out of all Oracle Marketing e-mails at any time.
Please note that opting-out of Marketing communications does not affect your receipt of important business communications related to your current relationship with Oracle such as Security Updates, Event Registration notices, Account Management and Support/Service communications.

Hi All,
I have looked at the Packaged Applications.
I declined to use them because they would require quite a bit of modification to meet my needs.
I find it faster and more reliable to code small utility applications from scratch so that my clients get exactly what they need; no more and no less.
APEX is awesome at pumping out these utility applications quickly and cheaply with acceptable quality.
Hope this helps.
Cheers
Patrick Cimolini

Directory Setup for RAC and Oracle Restart

I have three database installations that I'd like some insight on the initial directory structure and permissions. The three installations are:
1) Prod RAC - OEL 5U2, 11.2.0.2 Grid Infrastructure, 11.2.0.2 DB EE with RAC option
2) Test RAC - OEL 5U2, 11.2.0.2 Grid Infrastructure, 11.2.0.2 DB EE with RAC option
3) Single Instance - OEL 5U2, 11.2.0.2 Grid Infrastructure Standalone (Oracle Restart), 11.2.0.2 DB EE
The they all have two users GRID (for Grid Infrastructure Software Owner) and ORACLE (for Oracle Database Software Owner).
We had a consultant install the databases. It's very weird since we have an inconsistency in directories and permission. I want to understand the inconsistency between RAC installations as well as Oracle Restart Install.
SEE BELOW: The two RAC servers have different owners for /u01/app/11.2.0.2 directory. The Oracle Restart Installation - Single Instance has the same owner as Prod RAC but different than Test RAC. What the consultant said was that ORACLE_BASE would be /u01/app/oracle for both Grid Infrastructure and Database installations. This was to apply to TEST/PROD RAC (3 node, 3 instances, 1 instance/node) and Oracle Restart installation. The GRID_HOME would be /u01/app/11.2.0.2/grid and ORACLE_HOME would be /u01/app/11.2.0.2/db_1. It seems like the owners aren't setup correctly. Why? I don't want problems with patching or upgrading. If this setup is technically incorrect what is the best way to setup so there's no owner/permission issues. Is it necessary to have two separate ORACLE_BASE's like /u01/app/grid?
PRODUCTION REAL APPLICATION CLUSTER (Displaying only one Node details)
$ cd app
drwxr-xr-x 6 root oinstall 4096 Feb 26 2011 .
drwxr-xr-x 3 root oinstall 4096 Apr 21 2009 ..
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 11.2.0.2
drwxrwxr-x 2 emagent oinstall 4096 Feb 26 2011 emagent
drwxrwxr-x 9 oracle oinstall 4096 May 16 2011 oracle
drwxrwx--- 7 grid oinstall 4096 Feb 26 2011 oraInventory
$ cd 11.2.0.2
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 .
drwxr-xr-x 6 root oinstall 4096 Feb 26 2011 ..
drwxr-xr-x 79 oracle oinstall 4096 Mar 29 2011 db_1
drwxr-xr-x 69 root oinstall 4096 Feb 26 2011 grid
$ cd ..
$ cd oracle
9 oracle oinstall 4096 May 16 2011 .
drwxr-xr-x 6 root oinstall 4096 Feb 26 2011 ..
drwxr-xr-x 4 oracle oinstall 4096 Feb 26 2011 admin
drwxr-xr-x 3 oracle oinstall 4096 Feb 26 2011 cfgtoollogs
drwxrwxr-x 2 grid oinstall 4096 Feb 26 2011 Clusterware
drwxrwxr-x 11 grid oinstall 4096 Feb 26 2011 diag
drwxrwxr-x 3 grid oinstall 4096 Feb 26 2011 hqrac03
drwxr----- 3 oracle oinstall 4096 May 16 2011 oradiag_oracle
drwxr-xr-x 3 root root 4096 Mar 13 2011 oradiag_root
TEST REAL APPLICATION CLUSTER (Displaying only one Node details)
$ cd app
drwxr-xr-x 6 root oinstall 4096 Jan 26 2011 ./
drwxr-xr-x 3 root oinstall 4096 Jan 26 2009 ../
drwxrwxr-x 4 root oinstall 4096 Jan 26 2011 11.2.0.2/
drwxrwxr-x 2 emagent oinstall 4096 Mar 1 2011 emagent/
drwxrwxr-x 10 grid oinstall 4096 May 16 2011 oracle/
drwxrwx--- 7 grid oinstall 4096 Jan 27 2011 oraInventory/
$ cd 11.2.0.2
drwxrwxr-x 4 root oinstall 4096 Jan 26 2011 ./
drwxr-xr-x 6 root oinstall 4096 Jan 26 2011 ../
drwxr-xr-x 80 oracle oinstall 4096 Mar 17 2011 db_1/
drwxr-xr-x 70 root oinstall 4096 Jan 27 2011 grid/
$ cd ..
$ cd oracle
drwxrwxr-x 10 grid oinstall 4096 May 16 2011 ./
drwxr-xr-x 6 root oinstall 4096 Jan 26 2011 ../
drwxr-xr-x 4 oracle oinstall 4096 Feb 2 2011 admin/
drwxr-xr-x 4 oracle oinstall 4096 Feb 2 2011 cfgtoollogs/
drwxr-xr-x 2 grid oinstall 4096 Jan 26 2011 Clusterware/
drwxrwxr-x 11 grid oinstall 4096 Jan 26 2011 diag/
drwxr-xr-x 3 grid oinstall 4096 Jan 26 2011 hqract03/
drwxr-xr-x 3 grid oinstall 4096 Mar 23 2011 oradiag_grid/
drwxr----- 3 oracle oinstall 4096 May 16 2011 oradiag_oracle/
drwxr-xr-x 3 root root 4096 Jan 27 2011 oradiag_root/
SINGLE INSTANCE DATABASE (ORACLE RESTART)
$ cd app
drwxrwxr-x 6 503 oinstall 4096 Feb 26 2011 .
drwxr-xr-x 3 root root 4096 Apr 16 2009 ..
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 11.2.0.2
drwxrwxr-x 8 grid oinstall 4096 Feb 26 2011 oracle
drwxrwx--- 6 grid oinstall 4096 Feb 26 2011 oraInventory
$ cd 11.2.0.2
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 .
drwxrwxr-x 6 503 oinstall 4096 Feb 26 2011 ..
drwxr-xr-x 76 oracle oinstall 4096 Apr 6 2011 db_1
drwxr-x--- 69 root oinstall 4096 Feb 26 2011 grid
$ cd ..
$ cd oracle
drwxrwxr-x 8 grid oinstall 4096 Feb 26 2011 .
drwxrwxr-x 6 503 oinstall 4096 Feb 26 2011 ..
drwxrwxr-x 5 grid oinstall 4096 Feb 26 2011 admin
drwxrwxr-x 7 grid oinstall 4096 Feb 26 2011 cfgtoollogs
drwxrwxr-x 2 grid oinstall 4096 Feb 26 2011 checkpoints
drwxrwxr-x 2 grid oinstall 4096 Feb 26 2011 Clusterware
drwxrwxr-x 11 grid oinstall 4096 Feb 26 2011 diag
drwxrwxr-x 3 grid oinstall 4096 Feb 26 2011 hqods01
Thanks so much.

Hello
I did only check prod, as that is the important one.
i am afraid that setup is not clean. I won't use the work is wrong, but need to be normalized.
grid oracle base need to be separate from oracle oracle base, and the grid oracle home, MUST be outside of oracle base/oracle home of the oracle user.
In a multi user setup, the structure should be as follow.
grid user, group oinstall, asm* groups
oracle user, group oinstall, dba and db* groups
The GRID install, have, grid home and oracle base
the oracle base for grid should be, /u01/app/grid
the grid home should be, /u01/app/11.2.0.3/grid
the Oracle user have several homes, and oracle base
the oracle base for oracle should be, /u01/oracle
so, for permissions, when I create this, i do as root
mkdir -p /u01/app/11.2.0.3/grid
mkdir -p /u01/app/grid
mkdir -p /u01/app/oracle
mkdir -p /u01/app/oraInventory
chown -R grid:oinstall /u01
chown -R oracle:oinstall /u01/app/oracle
then, you install grid .. you have so say oracle home is /u01/app/grid and oracle home is /u01/app/11.2.0.3/grid
at the end, the root.sh as part of the install will take care of the permissions for oraInventory, and the rest for grid.
when grid is installed, you can move to the oracle db install you use oracle base as /u01/app/oracle and oracle home as /u01/app/oracle/product/11.2.0.3/dbhome_1
that will give you
2 4 drwxr-xr-x 6 root oinstall 4096 Sep 21 03:20 /u01
5996545 4 drwxr-xr-x 6 root oinstall 4096 Sep 18 22:58 /u01/app
5996546 4 drwxr-xr-x 8 grid oinstall 4096 Sep 18 22:50 /u01/app/grid
5996547 4 drwxr-xr-x 3 root oinstall 4096 Sep 18 22:30 /u01/app/11.2.0.3
5996548 4 drwxr-xr-x 69 root oinstall 4096 Sep 21 10:52 /u01/app/11.2.0.3/grid
5996549 4 drwxrwx--- 5 grid oinstall 4096 Oct 30 22:08 /u01/app/oraInventory
7406840 4 drwxr-xr-x 7 oracle oinstall 4096 Oct 30 22:09 /u01/app/oracle
7406841 4 drwxr-xr-x 3 oracle oinstall 4096 Sep 18 22:58 /u01/app/oracle/product
7406842 4 drwxr-xr-x 6 oracle oinstall 4096 Oct 30 22:04 /u01/app/oracle/product/11.2.0.3
7766052 4 drwxr-xr-x 77 oracle oinstall 4096 Nov 2 01:20 /u01/app/oracle/product/11.2.0.3/dbhome_1
Each user have to use his own oracle_base, as each oracle_base will store files and folders created for logs, admin, diagnostic with different permissions and different usages, for a reason you have role separation.
example of the content of each oracle base
$ find /u01/app/oracle/ -maxdepth 1 -ls
7406840 4 drwxr-xr-x 7 oracle oinstall 4096 Oct 30 22:09 /u01/app/oracle/
7406841 4 drwxr-xr-x 3 oracle oinstall 4096 Sep 18 22:58 /u01/app/oracle/product
8749076 4 drwxrwxr-x 3 oracle asmadmin 4096 Sep 18 23:03 /u01/app/oracle/diag
8749064 4 drwxr-x--- 6 oracle oinstall 4096 Oct 30 22:09 /u01/app/oracle/admin
8716289 4 drwxr-xr-x 2 oracle oinstall 4096 Oct 30 22:18 /u01/app/oracle/checkpoints
8749061 4 drwxr-x--- 5 oracle oinstall 4096 Sep 18 23:12 /u01/app/oracle/cfgtoollogs
$ find /u01/app/grid/ -maxdepth 1 -ls
5996546 4 drwxr-xr-x 8 grid oinstall 4096 Sep 18 22:50 /u01/app/grid/
7307540 4 drwxrwxr-x 4 grid oinstall 4096 Sep 18 22:49 /u01/app/grid/diag
7307474 4 drwxr-xr-x 2 grid oinstall 4096 Sep 18 22:33 /u01/app/grid/Clusterware
7307265 4 drwxr-xr-x 2 grid oinstall 4096 Sep 18 22:33 /u01/app/grid/checkpoints
7307532 4 drwxr-x--- 4 grid oinstall 4096 Sep 18 22:49 /u01/app/grid/cfgtoollogs
7406796 4 drwxr-xr-x 3 root root 4096 Sep 18 22:50 /u01/app/grid/oradiag_root
Take care,
Alvaro.

Statistics setup for 2LIS_11 and no storage space available internal table

Hi, I am running statistical setup for 2LIS_11_VAITM. It ran for 10 hours and failed with an ABAP run time error. The error is "no storage space available for extending an internal table". For 11 application, the selection options is sales org, company code and sales document. We have tried twice, and already drilled down to the level of sales org and company code, but still with error.
The only option is sales documents.
The volume of the data is 16 million records around in VBAP table which needs to be in the setup table.
What is the criteria to categorize the sales document.
Can we use order types? We have 200 values in the order types. And I am not sure the document ranges in each order type is clearly defined and not overlapping each other, so that we could load those in the setup table.
Please advise!! Or if you have other suggestions!
Thanks!

Hi
It could be because of main memory problem... so Restrict your selections and do the statistical setup
by the way how many comp codes you have? restrict with comp codes or doc ranges
Thanks,

Financial report for essbase and planning application

Hi,
Can any one please explain me what is the difference between creating financial report for essbase application and planning application.
Considering we will have Essbase cube for the planning application
Thanks in advance

Correct, the data that is stored in Essbase will be the same regardless of which connection type you use.
Data that is only stored in Planning can only be retrieved using a Planning connection. This includes Supporting Detail and SmartLists as these are stored in the Planning relational database.
As a general rule I always use an Essbase connection unless i specifically want to get supporting detail or smartlists but that is just me.
Hope this helps
Stuart

How to set up VLAN for DATA and VOIP on SRW248G4P switch?

Hi guys,
I am totally new and was given this task to complete. I really really need help.
We are using one network 192.168.1.0
Shared with data and voip.
CISCO C870, 5 switches LINKSYS SRW248G4P .
The email wrote:-
On the Linksys switch;
- create two different VLANs one for voice and one for data.
- put a firewall between the two VLANs (between voice and data) and only enable certain ports to flow to voice network (inbound tcp 8443 and ssh )
What should i do guys? I really need a dumb guide now.
I know its simple for you guys but i am not a smart IT fella. Whats the step by step?

If the switch is new or you have support on this, then you might try calling the support center. Here is a link:
https://www.myciscocommunity.com/community/smallbizsupport
On the right hand side you can find links to the support center.
Here is a link to the guide:
http://www.cisco.com/en/US/products/ps9967/prod_maintenance_guides_list.html
@ the bottom of this link you can find your switch model, you want the larger of the two. In this guide it shows you how to create a second vlan.
Will your router be the firewall between the two?
Kindest regards,
Andrew Lissitz

Exchange certificates and services setup for internal and external clients access on separate domains.

I have the following on my local network.
Server DomainA -> Small Business server 2003/Exchange 2003
Server DomainB -> Windows 2008 R2/Exchange 2013
Clients Domain A -> Windows XP/Outlook 2003
Clients Domain B -> Windows 7/Outlook 2007/2010
Problem: I want clients from DomainA to log into Exchange on DomainB on the same local network.
I need to know how to setup the DNS on both domains and the certificates on the DomainB Exchange server
to accept the connection from the PC on domainA. All connections from clients on domainB to server on domainB
work correctly but when adding accounts to Outlook 2003/2007 on domainA clients I am getting certificate errors.
I have purchased certificates for mail.domainb.com and autodiscover.domainb.com but I dont know how to get
the clients on domainA to recognize those external URL's of the exchange server (with the certificates bound to them) from the internal network. Hence I get domain errors.
I am getting issues when a client on DomainA tries to add an Outlook mail profile to connect to the Exchange on DomainB
Any suggestions on how to set this up?
thanks

Domain A & Domain B are two separate AD Forests?
Users in Domain A either need mailbox-enabled user accounts that are in DomainB or a linked mailbox in Domain B to utilise the Exchange Server in DomainB. In either case with the help of the autodiscover service user can use the services in ExchangeB.
If the client machines are member of domainA and you are trying to access ExchangeB you will then need to leverage a custom XML file for autodiscover and force the Outlook client to use this file.
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<Account>
<AccountType>email</AccountType>
<Action>redirectUrl</Action>
<RedirectUrl>https://autodiscover.domain.com/autodiscover/autodiscover.xml</RedirectUrl>
</Account>
</Response>
</Autodiscover>
Then you need to configure the client machine to query that XML file by adding the following registry key:
Refer to XML file
for Outlook 2007:
HKCU\Software\Microsoft\Office\12.0\Outlook\Autodiscover
for Outlook 2010:
HKCU\Software\Microsoft\Office\14.0\Outlook\Autodiscover
STRING_value <your_namespace> = path to XML file
you can find more information in the following link.
Controlling Outlook Autodiscover behavior
http://blogs.technet.com/b/kristinw/archive/2013/04/19/controlling-outlook-autodiscover-behavior.aspx
CK

Printer Setup for Aperture and Epson R1800

After installing the upgrade to 1.5, something went wrong with my printer setup for both my R1800 and my PictureMate Deluxe.
I've done the following:
Reset the printer system.
Reinstalled the Drivers
Attempted to Print from Aperture using about 30 + combinations of settings.
I'm still getting colors that are off and overall dark photos.
Best Setting appears to be
Printer Settings
Print Settings
Media Type: Premium Glossy Photo Paper
Color: Color
Mode: Advanced (Photo, High Speed, Finest Detail, Off)
Color Management
Off (No Color Adjustment)
ColorSync Profile: SPR1800 PrmGlsy Photo.icc
Black Point Compensation = Checked
Gamma 1.10
The resulting pictures appear to be about 1 f-stop or so underexposed and the colors are off (I'm color blind, so I can't say exactly how). I know that it is the setup of the printer settings. If I print the same pictures from Nikon Capture on my Windows computer, the print is perfect. I prefer to use Aperture for my photo work.
Epson doesn't have Aperture and doesn't understand all of the settings. The Apple Care support tech stated that he is not qualified to answer and said to call back when the Aperture team is working. I've got a ton of Christmas gifts to print out!
Assistance would be greatly appreciated.
Thanks,
-William

william:
you don't state in your original posting whether or not you've calibrated your monitors, especially to a 2.2 Gamma. in order to get the most accurate screen->print matching you have to hardware calibrate your monitors. this is by far the single most significant improvement i've made in my workflow. prior to calibration my monitors were set to a gamma of 1.8 which is much brighter than 2.2 and this causes you to NOT correct your images with the additional exposure required for proper printing. my prints were always too dark prior to calibration.
the spyder 2 from color vision is an excellent choice.
scott
PowerMac G5 2.5GHz Mac OS X (10.4.8) MacBook Pro 2.0GHz

Need advice on best setup for Extreme and Express w/ (n only) network

I'd like to get some advice on the best setup for my situation. I've read a number of posts on WDS, Extending a Network, etc. and, unfortunately, I'm now more confused than ever.
We have an Airport Extreme 802.11n using WPA2 Personal, 2.4Ghz (n only connection) which I've found to give us the best range/connection speeds for the following devices (all computers running 10.5.5, Apple TV's using most current update):
(2) MacBooks
iMac
(2) AppleTVs
The good news we have a large house, the bad news we have a large house. Meaning of course that I don't get the range in parts of the house I'd like to. I also have an older Mini (G4) connected to the AEBS thru ethernet (the Mini acts as the iTunes server for the ATVs).
I just bought a new Airport Express with the desire to place it on the other side of the house to both enhance the range of the wireless network and to provide another wired to wireless connection to the network.
I initially merely chose to "Extend a wireless network" but that seems to have a MAJOR adverse impact on the speeds of the wireless network. dropping the streaming to one of the ATV by like 90%. I would like to maintain the security settings I have as well as the 2.4Ghz (n only) since these provide the best speed/connection range on the AEBS.
My question then is what is the best way to use the AX (WDS? Bridge?).

The best way to use it is the option you chose "Extend a wireless network".
WDS forces you to the much slower 802.11g and even cuts that bandwidth in half.
Operating as a bridge has nothing to do with wirelessly extending a network. Changing this option won't have any effect on wireless bandwidth.

Required study material for enhancements and cross applications

Hi Experts,
Can any one send me study material of enhancements and cross applications.
My mail id: [email protected]
Thanks in advance........
Bye...

Hi,
Please try the link given below for enhancements
http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
ALE
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
Workflow
Workflow automates the steps and activities in a business process according to predefined procedures and rules.
Workflow presents information and documents to the appropriate knowledge worker or agent (another entity such as a program) to make a decision or perform an activity.
Workflow tracks each and every step in the process flow and maintains an ongoing status.
Workflow also collects and reports all of the metrics associated with the execution and completion of the process.
Check the below links u will get lot of info..
http://www.sap-press.com/product.cfm?account=&product=H950
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Go through the following links on FORK :
http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/25f1e7454311d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://www.insightcp.com/res_23.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
For more reference on workflow: http://****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/9277a346f311d189470000e829fbbd/frameset.htm
Check these links.
http://www.sapgenie.com/workflow/index.htm
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440
Workflow tutorials with step-by-step and with screenshots are available at
http://www.****************/Tutorials/Workflow/Workflow.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://www.sapbrain.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
reward points if useful
regards,
Anji

Resizeable Presentation Setup for Video and 3D

I want to be able to have a slide show that integrates still images, text, video and 3D. I use InDesign but it is pretty constraining. PowePoint and the like have similar constraints.
I can assemble a simple presentation in Flash with video integrated, etc. but it is usually impossible to predict the resolution of the projector I will be using. Hence my question:
How can I build a Flash presentation template that I shall be able to conveniently reuse and that will be resizeable?
Option 1. Is it possible to make Flash to scale the stage and all content proportionately, like PowerPoint or Acrobat can do (with black areas if the screen ratios are different)?
Option 2. What is the reasonable path for making resizeable/edjustable content? I looked at this (starling + feathers)
http://www.adobe.com/devnet/flash/articles/designing-multidevice-multiresolution.edu.html
I like the use of Stage 3D but these frameworks do not seem like a good match. It is slow to modify the content (I need to be making new presentation reguraly) and I shall not be using most of the functionality. It could work if I build several types of pages and reuse them maybe but I suspect a simpler way should exist.
Thank you for pointers and advice,
Maya

This function will get you far:
function goScaledFullScreen()
    var screenRectangle:Rectangle = new Rectangle(0,0,stage.stageWidth,stage.stageHeight);
    stage.fullScreenSourceRect = screenRectangle;
    stage.displayState = StageDisplayState.FULL_SCREEN;
    stage.quality = StageQuality.BEST;
Independent of your actual monitor resoulution it will scale up any content you might load via loader to the full screen resolution.
It has its limits though: On a Mobile device it won`t reorganize the content if you rotate the device from Landscape to Portrait. Also if you have content that is off-stage you might have to employ masks if the Monitors aspect ratio differs from your presentation one`s.
You can use the Capabilities class to get the actual ResolutionX/ResolutionY of the device that runs your presentation.
You might want to somehow inform your presentation if the resolution gets changed via the Resize Event
If size is not an issue you might prepare your presentation in the best Quality possible (for example HD) because downsizing works in general much better (qualitywise) than upsizing.

AE Setup for printer and Airtunes ONLY?

If I set up a wireless network on my AE for printing and Airtunes, but my laptop accesses the internet via ethernet, does the AE allow access to that connection backwards through the laptop? (I don't want it to).

dasharst, Welcome to the discussion area!
Yes that is possible.
If your Linksys is a wireless router, simply configure the AirPort Express (AX) to join the wireless network created by the Linksys.
If your Linksys isn't wireless, simply connect the AX via Ethernet to one of the Linksys LAN ports. Configure the AX to act as a bridge (not sharing a single IP address).

Need help getting new printer hp deskjet 3520 setup for eprint and wireless

need help getting new printer hp deskjet 23520 stup for eprint and wireless

Hi Pastorlee7,
I see that you're having problems setting up your printer. I would take a look at the document below.
Hp deskjet 3520
Let me know how it goes.

Optimal Hard Drive Setup for 3D and CS6 Motion Graphics?

Hello, I'm trying to figure out the best way to separate the following into different hard drives for best performance...
- OS (probably Windows 7 or 8 64bit)
- OS page swap disk
- Programs (Cinema4D and Adobe CS6)
- Adobe Media/Disk Cache
- Project files
- Source/Import Data Files
- Render/Output Data Files
So far, I'm thinking of...
- One Internal SATA3 SSD for OS, OS swap, Programs, Adobe Media Cache
- One Internal SATA2 HDD for Project and Source/Import Data Files
- One External USB3 HDD for Render/Output Files
I'm wondering if separating the files in a different way would be more optimal, and/or if adding more SDD hard drives for the Page Swap file and Media Disk Cache would we worth the money. Particularly, should the OS, OS swap file, Programs, and Media Cache be separated into different drives?

1. Why separate Project and Media(I'm assuming you mean footage/photoshop/ect.) files? Aren't project files very small?
Premiere Pro and After Effects project files aren't that large, but on this drive I also include any audio and stills used in the project, as well as the Encore project. Essentially anything you would need to rebuild the project down the line would go here, except the media. That goes on it's own dedicated drive.
Depending on the complexity, a project folder can easily get into multi-gigabyte range.
2. If I have one SATA3 SSD with OS(plus page file) and programs on it, would it be better to put the Cache/Scratch/Previews there as well, vs. on a separate slower SATA2 HDD disk?
I'd go separate. Don't put anything on the System drive but the OS and Windows.

QoS Setup for Whatsapp and VOIP application

Similar Messages

Maybe you are looking for