Qosmio F30 : New Bios 3.70 Released

Hello Friends:-
This is the new Bios For F30 Users
BIOS Version 3.70 Bios Date : 10/23/2007
Download From Here:-
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp

Thx, my friend updated the Firmware and the network connection has gained some performance.
Nice weekend

Similar Messages

Qosmio F30: New BIOS update 3.20 t0 3.40 was released

new updated bios released on 08/03/07
v3.40

Dear Reaver I appreciate your participation on this forum and I have noticed your permanent helpfulness here on this support forum. Respect!!!
I would like to give you 10 reward points now but unfortunately it is not possible. ;)

Qosmio X500 - NEW BIOS update - 1.90

Found a new BIOS update 1.9 on the Australian Toshiba Website. This morning it was showing version 1.40, but now it says version 1.90. I will try it on my X500 when I get home tonight, see if it fixes the Sleep-wake up issue.
http://www.mytoshiba.com.au/support/notebooks/qosmio/x500/pqx33a-00x00j/download?os=25
Aaron

Hey danied...thanks for sharing this....yes I have a Qosmio x500-110 (win7 64 bit) and its been giving the Bluetooth disconnection/ finger print sensor/and webcam not initialised problem since the start.
Dont know what is causing this problem. I have tired installing all the drivers with no use. All the three get disconnected together. Also there was sum problem with my Bluetooth stack so I downloaded the latest on e from Toshiba website and the software works fine now but once it gets disconnected with the webcam u need to restart.
This problem is still there...

Qosmio F - New BIOS settings can't be saved

When I enter BIOS and when I do some changes and want to save them I can not. It seems I have to restart. I have the latest BIOS update. Come on Toshiba.
Who do I have to contact to report problems such as this or the fact that my function buttons still don't work even that I have reinstalled VAP software.

My Qosmio is an F10-124. It was running a fully updated version of XP MCE and had not been much trouble apart from a completely new motherboard etc under warranty! It also has 2gig memory and a 160gig HDD which for some reason now is only showing 127gig.
I purchased an upgrade WIN7 package a few weeks ago and installed it, and it runs fine, better I think than XP. Drivers took a while to update but it was plain sailing really.
However I had a niggling feeling that there might be a better BIOS by now. Toshiba's site told me the latest version for this machine is 1.40 whereas it already has version 2.0. I think the site just has no support for these re-boarded machines which have R at the end of the part number. This trips up Tempro until the R is removed. I have tried the only W7 32 BIOS I can find so far, version 2.20, but installation fails, so maybe it's best left alone for now.
Don't know if this is any more than academic but at least I have succeeded running W7. Now, Qosmio Player, that's another story.

Qosmio F30: New nVidia display driver v156.72 VISTA fixes major errors

http://www.laptopvideo2go.com/forum/index.php?showtopic=15580
This driver fixes major errors in some of the new games Released recently
Works on F30,G30 With nVidia Geforce Go 7600
Download from
Here

Thanks for this notification.
This website is already known to me and I have noticed this new graphic driver version.
Its really an option to the original nVidia GPU drivers which are usually designed only for the desktop PC graphic cards.
But the drivers from the www.laptopvideo2go.com site run on the notebooks too.

Qosmio X500 - NEW BIOS UPDATE 2.20

Anyone downloaded the new 2.20 BIOS yet ? I wonder what problems it is trying to fix ?

I did a search and found this
*Version 2.20 - 2010-02-23*
Modified the LID function.
Updated the verb table.
Added a solution for USB port 6/7 sightings issues.
Added a solution for the Synchronous Interrupt Ordering sightings issue.
Changed reboot to warm boot, and also fixed an issue where resuming from S3 caused reboots.
Updated the EC to version 0.28.
Set a CPU reset command after Multi-core setting changes.
*Version 1.90 - 2009-12-31*
TLC mode supports Computrace.
Disabled ASPM of the WLAN.
Removed the "for Evaluation only" string from POST.
Restored the Thermal base address after S3 Resume.
Program HDMI while S3 Resume.
Fixed: "F12 string" issue.
Changed the EC to TZ1H_26.bin.
Disabled HDMI by GPIO in the _PS0 method.
Fixed "S4 Resume fails after loading defaults."
Message was edited by: Aaron Richards

New Bios coming? Release?

HI. I recieved a bios beta from MSI which got my realtek sound card to be recognized along with my other pci sound card but there still seems to be a little bit of problems here there like another pci card I have isn't getting recognized......it's beta after all. I wanted to know when is the next official beta release past the current 1.2 bios?

I installed the bios 1.3b3 which is available on the japanese site. Its sayz its supposed to fix hybernation.
As far as I can tell hybernation still dosen't work, and all the other problems this buggy board has are still there. Audigy problems/memory compatibility/etc.

Qosmio F30 - installing new hard drive

Hi,
I have just installed a new hard drive on my Qosmio F30 - It originally only came with one 60 GB hard drive.
The second drive is identical to the first in every way, i.e. 60 GB Toshiba drive.
I have initialised the new drive and it is showing as online and unallocated. I want to use the drive to basically increase my capacity, not as a mirror, and therefore selected this option using the RAID utility.
However when I expelore the C drive, it still only shows the total capacity of the drives as 60 GB. I assume that both drives should be showing as one drive, as 120 GB.
Is the drive working properly?
Thanks

Hi!
Chad is right, you should check the BIOS if the second HDD is recognized properly. Then you can set the RAID that you want. As I understand you right you want RAID 0.
If you dont have the user manual you can download it on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download User Manual
Bye

Qosmio F30-112 - How to reset the BIOS password

Hello
I get broken laptop Qosmio F30 -112 with broken lcd.
Now I get new lcd monitor and fix it but I can not access to bios password.
I found out how to recover passwords for other tips of toshiba laptops but I can not find for this.
What I looking is name of "jumper" that will reset my bios password.
I was carrying a laptop in a local service but they did not know to remove the problem.
Please help !!!
Best regards,
Antonio

Hello
Please visit http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/ and there you will find authorized service providers for your country. Make a call and check what can be done about that.

Bios Supervisor Password on Qosmio F30?

Hi All,
I want to set the password only for the bios (Supervisor)! How can I do that in Qosmio F30 (bios ACPI version 1.70)?
Regards

Hi
Usually you could set the password in the BIOS. Simply access to the BIOS and go through the single pages. I think the password option should be placed on the first page.
But be careful! If you forget the password you will be not able to remove it without any help from the authorized service partner!!!

When is going to be released official new bios for k9a platinum

Hi,
as I write in topic, when is going to be released new bios for k9a platinum?
thanks

That is a Kuma CPU and as such it is not and probably will not be supprted on your older MB.
Here is a list of MBs that support 7550 Kuma, 7750 it appears like is too new to be on any MSI MB CPU support list yet however it it should be supported on them as well.
K9A2 CF, K9AGM3-F, K9A2 Neo-F
K9N2GM-F V2, K9N2 SLI Platinum / K9N2 Zilent, K9N2G Neo
K9A2GM V3, KA790GX, KA780G-M
KA790GX-M, KA780GM-M, KA780GM
K9A Platinum >> CPU support << list

When new BIOS and drivers for Satellite A100-906 will be released?

Why releases of new versions of Bios have stopped?
Model very crude, it is necessary to improve it!
New versions of drivers and bios!

I didn't notice any problems with the drivers and the BIOS on thin notebook.
But who knows maybe new updates will be released some day we will see
regards

When will a new BIOS for K7N2G-LISR be released

Anyone have any idea when a new BIOS for the K7N2G-LISR will be released or if a new beta bios is available :D

I have a BIOS bug for MSI.
I can't disable the tv-out function. Therefore I can't watch any DVD's. I have to take out my G3 to enable me to adjust the onboard GFX settings and there is no option to disable tv-out as described in the manual.
I have emailed MSI and their tech support are either extremely busy or completely useless like their software.
This is completely driving me up the fecking wall!!!
I love MSI hardware but I have to avoid any MSI software like the plague... unfortunately the BIOS is unavoidable.
MSI, please sort this or I will be forced to return my hardware and look for another brand. I'm considering ABIT so be warned.
Could we draw up a list of bugs to give to MSI so we can try and get them sorted?
Sorry for the ranting, but theres not much I can do. :(
L8rz

Qosmio F30-140 - How to use Flash USB boot option?

Dears,
After I update my laptop BIOS, when I start my laptop I find new boot method, it is from Flash USB ?:| How can I use it and what type of file must be in it? I mean .iso or what?
Thanks

Hi
I dont have Qosmio F30 so I cant test it for you but I think this options means that you can boot from an USB stick for example. Have you checked this?
You cant boot from an iso file because you must create a bootable media. For example a Windows start disc or a Linux version that you can boot from USB stick.

Re: NTLDR and Qosmio f30-140

Hello fellows
My Toshiba is Qosmio f30-140 ,it came with xp windows, but I installed on it windows 7 and it was working very well for almost 2 years until i got problem with the display card started as little green dots till blank screen and these were over one year so I wanted to instal new windows 7.
So i remove my main HDD and connected it to other PC and format the C partition ,and copied windows source in the C partition and made the HDD in bois as primary boot and restart BUT i got NTLDR is missing press ctrl+alt+del to restart
*Notes*
1 - I have problem in the display card since i installed windows 7. i got the yellow triangle on it at device manager window.
2 - my screen doesn't work, it just appear the qosmio screen for one second and disappear when i start it. So i am using external LCD screen.
3 - I installed extra HDD (it has the space for extra HDD).
*I got Questions for you :*
1- How can i enable the laptop to boot from usb flash memory with windows 7 source
2- How can i instal windows 7 NOOWW ????
Thanks and appreciate any helps
Canadian shark

NTLDR error means the Windows boot system is corrupted or there are missing files.
Try holding down the Zero (0) key during power up to initiate the Recovery Partition. If it works, you can install Windows via the original factory Windows (XP/Vista).
You can install Windows from a USB Flash Drive (I guess you need at least 8GB or 16GB), but you need to make it bootable first, then prepare Windows files.
Press F12 during power up to view the boot menu, then select USB.
If it won't boot, then the USB drive was not prepared properly, or USB emulation needs to be set to "HDD" in the BIOS.

Qosmio F30 : New Bios 3.70 Released

Similar Messages

Maybe you are looking for