Qosmio x505 q880, Crashing
I highly doubt I have a virus in my pc. It used to overheat to the point where the plastic henge thats connected to the screen on the laptop has deformed a little. now it comes on, but it crashed. My guess is that all that heat from before, must've melted something vital and it moved out of place. because the pc crashes at lower temperatures now. mainly when I'm like 5 minutes into a game. any advise would be appreciated.
Call Toshiba @ 800-457-7777 and let them know your laptop is overheating and crashing as such. I assume that you're under warranty, and if not they may still be able or willing to assist due to the issue, overheating being oft times pretty serious.
www.google.com
Similar Messages
-
Replacing SSD with hard disk drive on Qosmio X505-Q880
Is it possible to replace the SSD drive in a Qosmio X505-Q880 with a hard disk drive? If so what type will work?
Thanks,
EdYes. I just replaced my 60 gig with a Kingston 240gig from Amazon. Re installed Windows 7 Ultimate. I DID NOT use the recovery disk from Toshiba because there were many programs that did not suit my needs, excellent though they were. It runs very fast about 4 times as fast as my old drive.
-
this is a new laptop, approximately 2 months old. dust, broken fans, etc have been ruled out.
the original OS was replaced with windows 7 pro 64bit.
the issue is that anything that stresses the CPUs will heal the laptop up to the point where i get artifacts in 3d rengering, etc. you can see this in games or autocad, etc.
CPUs are idling at 46-52c, for me this seems high. (my desktop idles at 39-42, and is in the same room)
the CPUs hit 80c with simple animated 3d open. this seems way too high.
my assumption is that the replacement of windows home premium with the new OS, that i missed some toshiba specific driver that controlls the CPU fans.
anyone have an idea which it might be?Hello
On which Toshiba page you are searching? I assume you mean drivers and other downloads that you want
Therefore check the Toshiba US page where your notebook is listed:
http://www.csd.toshiba.com > Download > Laptops > Qosmio > X505-Q880 -
Windows XP SP3 on Qosmio X505 Q880, Conexant Sound [WORKS!]
I've gotten everything but sound to work. The problem seems to be that it doesn't show up AT ALL. Meaning if there was some "unknown device" to force a driver through, it would work! So I'm wondering if there is something obsolete about UAA 1.0a conpared to Windows 7's UAA. Or maybe its outside of 32bit address space?
Its frustrating, because everything else works PERFECTLY! (after a lot of trial and error)
I'll share what I've done so far, and I'll be working tirelessly to get the sound working for the forseeable future, since I've spent so much time on it already. This should be the exact same for any X505 series, since the chipsets are all the same.
*You need free space on your drive for a new partition. Many options here...partition magic, etc. Personally, the tiny SDD got annoying fast, so I threw it out replaced it with a 640GB. Ahh, 10 times the space. Sweet relief.
*You need the WinXP OEM/Retail XP disk files. An unzipped or mounted ISO will do. (You will also need a blank CD-R for the finished product)
*Download nLite, http://www.nliteos.com/download.html. Feed it where your windows files are.
*Since Win XP install crashes due to missing SATA drivers so we use nLite to "slipstream" them in:
Windows Installer text mode SATA drivers: (I had nLite put in every line item from this pkg) http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18860&lang=eng
Regular Windows SATA drivers, so it actually boots once installed: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18180
Oh, if you want network access (YES YOU DO!)...slip in the wireless drivers: http://wikidrivers.com/wiki/Realtek_RTL8191SE/RTL8192SE
Be careful with the rest of the nLite settings, removing features might save a little space, but break stuff. Although the sizable language packs are a huge sitting duck, worth removing
*Install. When you format, do quick mode. The text mode drivers are SLOWWW and it will take an hour to finish.
*Open IE, go to nvidia.com, download drivers (yes the screen difficult to navigate because nVidia fails at life), 300*M* Series chip set, 360M (MAKE SURE THE M's are there!).
*Run windows update from IE. Select custom, and select all the hardware updates. You'll now have everything but bluetooth, touchpad scrolling, and sound.
*If you want bluetooth, download the "Bluetooth Stack" from Toshiba Support Downloads.
*If you want touchpad scrolling/gestures, temporarily unplug any USB mice, and install this:
http://drivers.synaptics.com/Synaptics_v14_0_3_C_XP32_Vista32_Win7-32_Signed_default.exe
*LAST FREAKING STEP...Installing sound:.....not there yet.....hlep!
Solved!
Go to Solution.YES!! It works!! Countless hours of pounding has paid off!
(The attachment says SOUND.TXT ....but if you rename it to SOUND.ZIP, things will make much more sense
Two major steps...the first one is the same no matter what your sound chip is, conexant, realtek, etc. The second one gets more specific.
Step 1: Patch Unified Audio Architecture (UAA), so it recognises sound card
Step 2: Install Driver for card
Sounds easy? Eh...kinda long and frought with problems, but persistance pays off.
The only problem is that you won't have sound until after you log in.
Use the files I attached and this should work straight off.
0. Make sure all your hardware updates are run, because all that crap gets in the way, especially the NVIDIA HDMI sound devices, which can cause confusion.
1. Download my attachment. (Just google for the files if it is gone)
EDIT: attachment didn't work...see my 3rd post below to recreate the files
Assuming you have XP SP3....we need to fake the Windows version so that it looks like SP2, so the new UAA wil install.
2. Open and install SP2.reg. ALTERNATIVELY: If you don't like opening reg files, use regedit to change
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows -> CSDVersion to "200" (hexadecimal)
3. Run the UAA update, usually kb888111.exe
http://cid-3f10d7c1771f7efe.skydrive.live.com/self.aspx/Public/MS-UAA%20for%20XP.zip
4. Now we restore it back to SP3. Run XP3.reg, or regedit CSDVersion back to 300 hex.
5. Reboot.
At this point there should be some new high def audio device begging for drivers. But,just our luck, there isn't. For some reason UAA will crash at boot, and its pretty good at that. So, we need to restart UAA.
6. Get devcon and copy it into your root directory C:\ . (its from MS, resembles linux's lspci command).
This will do the legwork of starting UAA.
7. Run UAAstart.bat. UAA should work now, and it should find your sound and ask for a driver. If not, edit the bat file, and correct the DEV_ number. You can get this number from Control Panel -> System -> Hardware (tab) -> Device Manager -> System devices -> "Microsoft UAA Bus Driver for High Definition Audio" (there should be two of them, pick the bottom one) -> Details (Tab) -> Device Instance Id
(If you can't get the attachment, "devcon restart ..." where ... is the device ID)
EDIT: go down to my 3rd post for a more thorough treatment of devcon
9. It should NOW be asking you a driver. (YES!)
This is where it gets more specific. The drivers here will work for X505 and several other models.
http://cid-10d0e6e125be32c7.skydrive.live.com/self.aspx/.Public/6ha113ww%5E_mod.zip
You will need to edit the INF file to change it to have the same DEV_ and SUBSYS_ numbers as your "Unknown Device", get these from Device Manager -> Unknown High Definition Audio Device ->Details -> Device Instance Id. If the DEV_ numbers are off by more than afew, you might have the wrong driver.
For examlple, in the above zip, the TPShin5a.inf file has the following line:
%HdAudioFunctionDriver.Pebble5071.DeviceDesc% = HdAudModel,HDAUDIO\FUNC_01&VEN_14F1&DEV_5067&SUBSYS_103C360A
In my case, I changed one of the lines to read
%HdAudioFunctionDriver.Pebble5071.DeviceDesc% = HdAudModel,HDAUDIO\FUNC_01&VEN_14F1&DEV_5067&SUBSYS_1179FFD5
You'll notice more than one of those. You don't have to change them all, its just a list of chip IDs that tells Windows this driver will work.
10. Point driver update to that directory.
11. You should have sound! If you don't, make sure you have conexant chipset, if you don't use other drivers.
OK Problem, I'm sure you'll notice that you'll lose sound every time you reboot. Well,
12. Copy that UAAstart.bat to the Start->Program Files-> Startup
That way it will force the sound to start when you log in. -
QOSMIO X505-Q887 - System Recovery
The disk drive on my Qosmio x505-q865 crashed. Orderd and receiived a new drive and recovery disks. Installation and recovery went smoothly, but some of the drivers are different than the equipment installed on my computer. There were severral error messages as recovery progressed and I am left with no sound but most importantly no internet at all. I can't load new drivers without internet. How do I solve this problem? I was disappointed that after providing my model number that the restore disks didn't have a choice of drivers to address these issues. The computer otherwise works but is of no use to me without wifi or cable internet - I can even get along without sound. Can someone help.
Qosmio X505-Q865
Downloads here.
That's unfortunately what happens when you restore to a disk having advanced-format technology. See this message from three years ago. Nearly all drives now have AFT. So we've had lots of experience with this.
The fix is to install a new storage driver as early in the process as possible.
Intel Rapid Storage Technology
If you have messed around with the drivers, you will probably need to repeat the restore.
-Jerry -
Qosmio: X505-Q890 Black Screen BUT Computer has not crashed
I have a Qosmio: X505-Q890, my screen goes black after a few minutes. But if you look at it on an angle you can see screen and mouse moving around. I am assuming that the backlights are going out on screen. What is the fix. I am capabale of dissasembling laptop and repairing. What parts do I need to fix?
Thanks
GregIt could be either the inverter or the backlight, but it's hard to know for sure. It could also be a loose cable, but that seems less likely to me (although it might be easier to check).
- Peter -
Qosmio X505 Hardware Lockups: 3 for 3
Hello, Toshibers--
I bought a Qosmio X505-Q870 from Fry's last Saturday. After about 12 hours of use, it locks up. Hard lock up: No mouse, no keyboard, nothing. After the second lockup in a few hours, I took it back.
I got the replacement Sunday night, and it started locking up, too, after just a few hours. Any sane person would have given up on the Qosmio at this point, but I love the screen. It's just so easy on the eyes.
Besides, hey, with Fry's who knows. So I order the Qosmio X505-Q875 from NewEgg.com. And, sure enough, the package from NewEgg has a genuine Toshiba Factory Seal on it, where the Fry's machines didn't.
Tragically, after a few hours, the new machine locks up. Well, hell.
At least, at this point, I don't think it's a fluke hardware issue. I suspect drivers. I'm downloading the Windows updates while I write this—this is the second time I'm writing this because the machine locked up during the download/update—but the updates don't look that promising.
I had put up GodMode on the first two machines before they froze, so I thought that might be it, but no dice. The third one crashed with no GodMode. They've frozen twice with the webcam on. But they freeze with nothing in particular going on, too.
The three installs have certain things in common. My feeling is that in no way should any of these steps be cause for hard lockups. I've not even gotten to installing my development software, and the machines don't seem to be running hot, and the fans seem okay, when they lock up.
But here are the things I do, in the order that I've done them, for all three machines.
Start IE, install Chrome. All subsequent browsing is done with Chrome.
Install Flash for Chrome.
Install Pidgin.
Install Opera, set up mail.
Install Sun VirtualBox. I haven't actually run this on two of the three machines, but it's been installed.
On the first two machines I installed OpenOffice.org. The third one locked up before I had a chance to.
This is my tale of woe. I do love the machine, but if it hard locks every few hours, it has obviously limited utility.
I've updated windows and killed the webcam app. If that doesn't cure it, I'll kill everything and see if that helps.
Unless anyone has a lead.
===Blake==Eh. It's good enough for me. I definitely looked at some log that was supposed to say what had happened and it gave no information except to say there had been an improper shutdown. (I guess that would have to be the Event Log, but MS changes the locations of all these things enough with every version that I can't be sure.)
While MS's track record is abysmal, I haven't seen a genuine hardware lockup—that wasn't actually due to a hardware problem (RAM, MoBo, HD being most common three)—since Windows 2000. I did skip Vista however.
Search: "windows 7 crashing flash". I doubt that is hardware related, no need to RMA before exhausting the software side.
Of course, I did that extensively with laptop two and three, since the odds of dual hardware failures in exact the same way seemed improbable. What I saw then and what I see now is that these search results talk about Windows 7 with Flash causing Firefox/Chrome crashing but not hardware lockups.
Well, wait, I do see one now. All during overt Flash activity. The weird thing is that this machine locks up even if Flash isn't apparently being used. (But I think there are some resident Flash programs that aren't always visible.)
Anyway, unfortunately for Toshiba, the onus falls upon them to give me a working machine. That's the cost of doing business with MS. And they're probably going to end up with two returns (unless Fry's just re-boxes them). If Windows 7 is unstable, they should ship the machines with XP until 7 is ready.
Figures, though: Only MS would take a stable OS and replace it with an unstable one. -
Qosmio X505 - System Recovery CD + webcam and graphics card driver
I need some answers from anyone regarding my Toshiba Qosmio X505 notebook.
I bought this notebook back in July of this year and I am having problems with it already.
Number one, my most important concern is a system recovery disk. $1,500+ dollars I spent on this computer with a warranty it didn't come with any system recovery CD.
Once a year on all my computers I like to reinstall Windows as it makes the computer brand new again (I constantly work and even go to school on my laptop so I can't help if scrap piles up on it and it slows down after a while). What am I to do about this?
I think I read on this forums a while back that the computer came with something to create a backup disc.
I found the program "Toshiba Recovery Media Creator" that appears to create a "System Recovery."
Would this be what I am looking for to create a backup of the computers OS and preinstalled software? I want to keep all my Toshiba utilities as well as the required software to play Blu Ray movies.
Number two, the web cam. This ain't a big deal as I hardly use it but sometimes when I start the computer I get an error message saying the web camera failed to initalize and then it doesn't work at all.
What gives? This should automatically work!
Number three, my graphics card/driver has been having some problems. Particurarily when I watch videos or run something like Windows Movie Maker. My screen will completely go black and and come back on and I get an error saying something like "NVidia has crashed and Recovered", I can't remember the exact error message, I archived it in Windows Error messages and it didn't save it for some reason. How do I fix this?
I got the latest graphics card drivers from NVidia that were appropriate for this computer and for some reason it crashes alot.
Any answers to these problems is appreciated.
I love this laptop but at the same time for the price of it compared to a cheap $300 other laptop I don't expect to have any problems with the web camera or editing videos. This computer should have rock solid drivers.> I found the program "Toshiba Recovery Media Creator" that appears to create a "System Recovery."
> Would this be what I am looking for to create a backup of the computers OS and preinstalled software?
Yes, this is the tool which creates the Recovery Disk. The recovery disk allows you t set the notebook back to the factory settings.
> Number two, the web cam. This ain't a big deal as I hardly use it but sometimes when I start the computer > I get an error message saying the web camera failed to initialize and then it doesn't work at all.
> What gives? This should automatically work
The webcam is controlled by Chicony webcam software. This software needs to be started in order to use the webcam. But also the 3rd party tools like MS messenger or Skype has an access to webcam and sometimes such tools can affect the webcam functionality.
Its hard to say why this happens but mostly everything works properly. But from time to time its needed to reinstall the webcam software.
> Particurarily when I watch videos or run something like Windows Movie Maker. My screen will completely go black and and come back on and I get an error saying something like "NVidia has crashed and Recovered", I can't remember the exact error message, I archived it in Windows Error messages and it didn't save it for some reason. How do I fix this?
This means that graphic card driver has crashed and has been started again.
Usually the graphic card driver should sort out such issues. -
X505 Q880 Black screen auto-restarts in Game
Hi everyone! I got this laptop X505 Q880 a couple of months ago and it was all wonderfully working fine until a week ago where it randomly restarts during a game. No warnings.. Nothing.. Just goes to a black screen and restarts with the unexpected shut down error after the restart. I have looked everywhere on the forums and I see a lot of "similar" problems with different "solutions" posted. Even though I haven't found anything on this particular model (the X505 Q880) I have tried many ways of fixing it but to no avail. I have guessed it's a big problem for many and it seems that even different models have this problem.
It restarts by it self without any warnings. Like some posts it doesn't have any error messages... I don't need to press the power button (as it turns back on) It restarts in 5 mins in to all the games I play. It only restarts when it's plugged in the AC. When I play on battery power it will run perfectly fine until it drains the battery power. I hear it's a problem with the graphics card, or it's the motherboard, or it's a driver problem, or something to do with the AC adaptor.
But which one is the real the problem??!?! And is there anyway I can fix it myself? Because I have just moved across the sea to a whole new country where I can't contact the Toshiba Customer Services.. And this cost me more than my plane tickets.... And I can't afford to buy another one...
Someone please advise me, and hopefully there is a solution out there somewhere... That actually works...
Kind regards,
Luimarceloaziz wrote:
http://laptopforums.toshiba.com/t5/Qosmio-Laptops/Another-overheating-Qosmio-X505-880-problem-need-h...
Take a look at this topic
There is more people having same problem.
Aziz
Yeah I see, it's good to know I'm not the only one.... Muahahaha...
Nah, it's not funny. What a waste of money....At least money can be replaced...
But what f***** waste of precious time...
I've arranged to repair it tomorrow at a repair service place here in London recommended by the Toshiba guys here. Even though I bought it in the States it has a Limited International Warranty so should be good. Will post up after the repair and hopefully find a solution for others IF they can fix it that is. Fingers crossed.
Otherwise any new breaking news? Solutions? Or anything? Anyone?
Is there actually someone who has X505 Q880 that still works fine? I wonder....
- Lui -
[Solved] Random freezes on a Toshiba Qosmio X505-Q888
Hi guys,
My laptop has been freezing randomly, about once per day, during the last 2 or 3 weeks. The system freezes completely, i.e. the display freezes, I cannot move the mouse, I cannot use the keyboard, the CAPS LOCK light starts blinking, and if there is any music playing, it enters an infinite loop of 2-3 seconds. I cannot use any keyboard combination such as Ctrl+Alt+F1 to switch into a terminal. Then I have no choice but to press and hold the power button.
The freezes seem to happen in a completely random fashion, independently from what programs/applications I am running, for how long the computer has been on, how much memory I am using, CPU temperature, etc. Also, I cannot find any clue in the log files. Everything seems to be OK just before the freeze (except for some random, annoying, but apparently unrelated messages such as "[system] Failed to activate service 'org.freedesktop.Avahi': timed out"). The only clue is that the CAPS LOCK key is blinking during the freeze, which means... kernel panic?
I am running 64-bit Arch Linux on a Toshiba Qosmio X505-Q888. My current kernel is 3.4.2-2, but this has been happening since at least 3.3.7-1. I know another person with exactly the same laptop model as me, who is having the same issues. I am lost here. Any ideas?
Thanks in advance!
lspci output:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GT215 [GeForce GTS 360M] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
07:00.0 FireWire (IEEE 1394): O2 Micro, Inc. 1394 OHCI Compliant Host Controller (rev 01)
07:00.1 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
07:00.2 Mass storage controller: O2 Micro, Inc. Integrated MS/MSPRO/xD Controller (rev 01)
0a:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
0b:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
lsmod output:
Module Size Used by
fuse 68768 2
uvcvideo 69437 0
videobuf2_vmalloc 2468 1 uvcvideo
videobuf2_memops 2246 1 videobuf2_vmalloc
snd_hda_codec_hdmi 23672 4
videobuf2_core 20415 1 uvcvideo
videodev 93086 1 uvcvideo
media 10213 2 uvcvideo,videodev
joydev 9991 0
snd_hda_codec_conexant 46154 1
snd_hda_intel 24053 6
snd_hda_codec 94273 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
arc4 1410 2
snd_hwdep 6300 1 snd_hda_codec
rtl8192se 60798 0
snd_pcm 74958 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
sdhci_pci 10833 0
rtlwifi 61929 1 rtl8192se
nvidia 10832296 52
sdhci 23854 1 sdhci_pci
toshiba_acpi 12820 0
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
sparse_keymap 3056 1 toshiba_acpi
acpi_cpufreq 5933 1
snd_timer 18966 1 snd_pcm
mac80211 395232 2 rtlwifi,rtl8192se
snd 58997 18 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
mmc_core 82070 2 sdhci,sdhci_pci
mperf 1267 1 acpi_cpufreq
serio_raw 4653 0
soundcore 5410 1 snd
i2c_i801 8180 0
wmi 8475 1 toshiba_acpi
psmouse 70792 0
processor 26567 1 acpi_cpufreq
video 11307 0
thermal 7959 0
battery 6517 0
ac 2376 0
pcspkr 1899 0
cfg80211 169978 2 mac80211,rtlwifi
microcode 12185 0
coretemp 5654 0
iTCO_wdt 12813 0
rfkill 15604 3 cfg80211,toshiba_acpi
iTCO_vendor_support 1929 1 iTCO_wdt
i7core_edac 17509 0
edac_core 36656 1 i7core_edac
crc32c_intel 1987 0
firewire_ohci 31677 0
firewire_core 51552 1 firewire_ohci
atl1c 33030 0
crc_itu_t 1363 1 firewire_core
button 4502 0
toshiba_bluetooth 2066 0
i2c_core 20369 3 i2c_i801,nvidia,videodev
evdev 9754 11
vboxdrv 1792262 0
loop 18160 0
ext4 424175 4
crc16 1359 1 ext4
jbd2 73919 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
sd_mod 29239 6
cdrom 35648 1 sr_mod
usbhid 36430 0
hid 85285 1 usbhid
ahci 20549 5
libahci 20023 1 ahci
libata 167515 2 ahci,libahci
ehci_hcd 41154 0
scsi_mod 132942 3 libata,sd_mod,sr_mod
usbcore 147533 5 uvcvideo,rtlwifi,ehci_hcd,usbhid
usb_common 954 1 usbcore
/var/log/dmesg.log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.2-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 11 22:27:17 CEST 2012
[ 0.000000] Command line: root=/dev/sda6 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf3ec000 (usable)
[ 0.000000] BIOS-e820: 00000000bf3ec000 - 00000000bf40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf470000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf470000 - 00000000bf4f1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf4f1000 - 00000000bf70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf718000 (usable)
[ 0.000000] BIOS-e820: 00000000bf718000 - 00000000bf71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf782000 (usable)
[ 0.000000] BIOS-e820: 00000000bf782000 - 00000000bf79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7cc000 (usable)
[ 0.000000] BIOS-e820: 00000000bf7cc000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: TOSHIBA Qosmio X505/Qosmio X505, BIOS V2.60 06/11/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ bf7c6000-bf7cc000
[ 0.000000] RAMDISK: 37d21000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6230 00024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 00000000bf7eef64 00064 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf7ce000 000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 00000000bf7cf000 0FBD2 (v02 TOSQCI CALPELLA 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000bf79bfc0 00040
[ 0.000000] ACPI: HPET 00000000bf7fed32 00038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 00000000bf7fed6a 0003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: APIC 00000000bf7feda6 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf7fee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bf7fee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: DMAR 00000000bf7df000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bf7cd000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffc000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000bf27c
[ 0.000000] 0: 0x000bf282 -> 0x000bf3ec
[ 0.000000] 0: 0x000bf40f -> 0x000bf46f
[ 0.000000] 0: 0x000bf70f -> 0x000bf718
[ 0.000000] 0: 0x000bf71f -> 0x000bf782
[ 0.000000] 0: 0x000bf79f -> 0x000bf7cc
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1045612
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 763168 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
[ 0.000000] PM: Registered nosave memory: 00000000bf3ec000 - 00000000bf40f000
[ 0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf470000
[ 0.000000] PM: Registered nosave memory: 00000000bf470000 - 00000000bf4f1000
[ 0.000000] PM: Registered nosave memory: 00000000bf4f1000 - 00000000bf70f000
[ 0.000000] PM: Registered nosave memory: 00000000bf718000 - 00000000bf71f000
[ 0.000000] PM: Registered nosave memory: 00000000bf782000 - 00000000bf79f000
[ 0.000000] PM: Registered nosave memory: 00000000bf7cc000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
[ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82880 r8192 d23616 u262144
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025127
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda6 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4035888k/5242880k available (4537k kernel code, 1060432k absent, 146560k reserved, 4308k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1729.162 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3459.42 BogoMIPS (lpj=5763873)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000037] Security Framework initialized
[ 0.000042] AppArmor: AppArmor disabled by boot time parameter
[ 0.000393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001416] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001859] Mount-cache hash table entries: 256
[ 0.002086] Initializing cgroup subsys cpuacct
[ 0.002089] Initializing cgroup subsys memory
[ 0.002097] Initializing cgroup subsys devices
[ 0.002099] Initializing cgroup subsys freezer
[ 0.002101] Initializing cgroup subsys net_cls
[ 0.002103] Initializing cgroup subsys blkio
[ 0.002131] CPU: Physical Processor ID: 0
[ 0.002133] CPU: Processor Core ID: 0
[ 0.002139] mce: CPU supports 9 MCE banks
[ 0.002149] CPU0: Thermal monitoring handled by SMI
[ 0.002156] using mwait in idle threads.
[ 0.003399] ACPI: Core revision 20120320
[ 0.078006] ftrace: allocating 17820 entries in 70 pages
[ 0.090499] DMAR: Host address width 36
[ 0.090501] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.090510] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2
[ 0.090513] DMAR: RMRR base: 0x000000bf6e9000 end: 0x000000bf6fefff
[ 0.091060] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.124054] CPU0: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz stepping 05
[ 0.229382] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.229388] CPU erratum AAJ80 worked around
[ 0.229390] CPUID marked event: 'bus cycles' unavailable
[ 0.229393] ... version: 3
[ 0.229394] ... bit width: 48
[ 0.229395] ... generic registers: 4
[ 0.229397] ... value mask: 0000ffffffffffff
[ 0.229399] ... max period: 000000007fffffff
[ 0.229400] ... fixed-purpose events: 3
[ 0.229402] ... event mask: 000000070000000f
[ 0.249516] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.269397] Booting Node 0, Processors #1
[ 0.280536] CPU1: Thermal monitoring handled by SMI
[ 0.282640] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.292741] #2
[ 0.303877] CPU2: Thermal monitoring handled by SMI
[ 0.305984] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.319396] #3
[ 0.330532] CPU3: Thermal monitoring handled by SMI
[ 0.332638] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.342719] #4
[ 0.353852] CPU4: Thermal monitoring handled by SMI
[ 0.355956] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.366056] #5
[ 0.377192] CPU5: Thermal monitoring handled by SMI
[ 0.379301] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.392710] #6
[ 0.403843] CPU6: Thermal monitoring handled by SMI
[ 0.405953] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.416041] #7 Ok.
[ 0.427172] CPU7: Thermal monitoring handled by SMI
[ 0.429279] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.429317] Brought up 8 CPUs
[ 0.429319] Total of 8 processors activated (27677.36 BogoMIPS).
[ 0.435425] devtmpfs: initialized
[ 0.436874] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff] (528384 bytes)
[ 0.436887] PM: Registering ACPI NVS region [mem 0xbf782000-0xbf79efff] (118784 bytes)
[ 0.437790] NET: Registered protocol family 16
[ 0.437904] ACPI: bus type pci registered
[ 0.437991] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.437995] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.511154] PCI: Using configuration type 1 for base access
[ 0.511883] bio: create slab <bio-0> at 0
[ 0.511944] ACPI: Added _OSI(Module Device)
[ 0.511947] ACPI: Added _OSI(Processor Device)
[ 0.511949] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.511951] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.514367] ACPI: EC: Look up EC in DSDT
[ 0.516773] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.522616] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.523068] ACPI: SSDT 00000000bf71aa98 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.523663] ACPI: Dynamic OEM Table Load:
[ 0.523667] ACPI: SSDT (null) 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.523844] ACPI: SSDT 00000000bf719018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.524426] ACPI: Dynamic OEM Table Load:
[ 0.524429] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.524795] ACPI: SSDT 00000000bf71a718 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.525430] ACPI: Dynamic OEM Table Load:
[ 0.525433] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.525614] ACPI: SSDT 00000000bf718d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.526223] ACPI: Dynamic OEM Table Load:
[ 0.526226] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.592282] ACPI: Interpreter enabled
[ 0.592285] ACPI: (supports S0 S3 S4 S5)
[ 0.592311] ACPI: Using IOAPIC for interrupt routing
[ 0.598233] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.598514] ACPI: No dock devices found.
[ 0.598518] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.598955] \_SB_.PCI0:_OSC invalid UUID
[ 0.598957] _OSC request data:1 8 1f
[ 0.598961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.599649] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.599652] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.599655] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.599658] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.599660] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.599663] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.599666] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.599705] PCI host bridge to bus 0000:00
[ 0.599708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.599710] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.599713] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.599715] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.599717] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.599720] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.599722] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.599734] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
[ 0.599797] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.599854] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.599882] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.599947] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.600011] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.600073] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.600134] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.600183] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.600275] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.600302] pci 0000:00:1a.0: reg 10: [mem 0xf0906000-0xf09063ff]
[ 0.600404] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.600445] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.600466] pci 0000:00:1b.0: reg 10: [mem 0xf0900000-0xf0903fff 64bit]
[ 0.600545] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.600582] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.600664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.600704] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.600786] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.600823] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.600906] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.600940] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.601022] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.601061] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.601088] pci 0000:00:1d.0: reg 10: [mem 0xf0907000-0xf09073ff]
[ 0.601190] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.601230] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.601314] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
[ 0.601463] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.601488] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
[ 0.601501] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
[ 0.601514] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
[ 0.601527] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
[ 0.601541] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
[ 0.601554] pci 0000:00:1f.2: reg 24: [mem 0xf0908000-0xf09087ff]
[ 0.601612] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.601644] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.601665] pci 0000:00:1f.3: reg 10: [mem 0xf0909000-0xf09090ff 64bit]
[ 0.601692] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.601781] pci 0000:01:00.0: [10de:0cb1] type 00 class 0x030000
[ 0.601793] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
[ 0.601805] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.601818] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.601827] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.601836] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.601895] pci 0000:01:00.1: [10de:0be4] type 00 class 0x040300
[ 0.601907] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
[ 0.602005] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.602009] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.602013] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.602018] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.602068] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
[ 0.602077] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.602086] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.602097] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
[ 0.602174] pci 0000:07:00.0: [1217:10f7] type 00 class 0x0c0010
[ 0.602196] pci 0000:07:00.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.602327] pci 0000:07:00.0: supports D1 D2
[ 0.602329] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.602380] pci 0000:07:00.1: [1217:8120] type 00 class 0x080501
[ 0.602402] pci 0000:07:00.1: reg 10: [mem 0xf0501000-0xf05010ff]
[ 0.602533] pci 0000:07:00.1: supports D1 D2
[ 0.602535] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.602597] pci 0000:07:00.2: [1217:8130] type 00 class 0x018000
[ 0.602619] pci 0000:07:00.2: reg 10: [mem 0xf0503000-0xf0503fff]
[ 0.602647] pci 0000:07:00.2: reg 18: [mem 0xf0502000-0xf05027ff]
[ 0.602758] pci 0000:07:00.2: supports D1 D2
[ 0.602760] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.612633] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[ 0.612644] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.612728] pci 0000:0a:00.0: [10ec:8172] type 00 class 0x028000
[ 0.612750] pci 0000:0a:00.0: reg 10: [io 0x4000-0x40ff]
[ 0.612767] pci 0000:0a:00.0: reg 14: [mem 0xf0600000-0xf0603fff]
[ 0.612884] pci 0000:0a:00.0: supports D1 D2
[ 0.612887] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.622602] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
[ 0.622621] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.622630] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.622707] pci 0000:0b:00.0: [1969:1063] type 00 class 0x020000
[ 0.622736] pci 0000:0b:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
[ 0.622753] pci 0000:0b:00.0: reg 18: [io 0x5000-0x507f]
[ 0.622870] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.632604] pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
[ 0.632622] pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
[ 0.632631] pci 0000:00:1c.6: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.632711] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[ 0.632725] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.632728] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.632731] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.632733] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.632736] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.632739] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.632742] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.632778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.632953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.633024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.633153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.633220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.633284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.633347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[ 0.633449] \_SB_.PCI0:_OSC invalid UUID
[ 0.633451] _OSC request data:1 1f 1f
[ 0.633455] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.633495] \_SB_.PCI0:_OSC invalid UUID
[ 0.633497] _OSC request data:1 0 1d
[ 0.633501] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.633503] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.639419] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.639461] PCI host bridge to bus 0000:ff
[ 0.639468] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
[ 0.639491] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
[ 0.639516] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
[ 0.639537] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
[ 0.639560] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
[ 0.639582] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
[ 0.639605] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.639628] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.639649] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.639670] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.639691] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.639714] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.639735] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.639757] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
[ 0.639779] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
[ 0.639820] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.639823] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.639825] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.640363] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.640427] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.640488] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.640549] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.640609] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.640673] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.640735] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.640799] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.640906] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.640915] vgaarb: loaded
[ 0.640916] vgaarb: bridge control possible 0000:01:00.0
[ 0.640960] PCI: Using ACPI for IRQ routing
[ 0.647549] PCI: pci_cache_line_size set to 64 bytes
[ 0.647793] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[ 0.647795] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
[ 0.647800] reserve RAM buffer: 00000000bf3ec000 - 00000000bfffffff
[ 0.647804] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
[ 0.647807] reserve RAM buffer: 00000000bf718000 - 00000000bfffffff
[ 0.647810] reserve RAM buffer: 00000000bf782000 - 00000000bfffffff
[ 0.647813] reserve RAM buffer: 00000000bf7cc000 - 00000000bfffffff
[ 0.647816] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 0.647914] NetLabel: Initializing
[ 0.647916] NetLabel: domain hash size = 128
[ 0.647917] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.647930] NetLabel: unlabeled traffic allowed by default
[ 0.647984] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.647994] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.648001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.652683] hpet: hpet2 irq 40 for MSI
[ 0.655983] hpet: hpet3 irq 41 for MSI
[ 0.659437] hpet: hpet4 irq 42 for MSI
[ 0.662806] hpet: hpet5 irq 43 for MSI
[ 0.666188] hpet: hpet6 irq 44 for MSI
[ 0.679597] Switching to clocksource hpet
[ 0.685694] pnp: PnP ACPI init
[ 0.685711] ACPI: bus type pnp registered
[ 0.686108] pnp 00:00: [bus 00-fe]
[ 0.686111] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.686113] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.686115] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.686118] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.686120] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.686123] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.686125] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.686127] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.686129] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.686132] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.686134] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.686136] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.686138] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.686140] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.686143] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.686145] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.686147] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.686149] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.686152] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.686215] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.686395] pnp 00:01: [io 0x0000-0x001f]
[ 0.686423] pnp 00:01: [io 0x0081-0x0091]
[ 0.686425] pnp 00:01: [io 0x0093-0x009f]
[ 0.686426] pnp 00:01: [io 0x00c0-0x00df]
[ 0.686429] pnp 00:01: [dma 4]
[ 0.686461] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.686568] pnp 00:02: [irq 0 disabled]
[ 0.686578] pnp 00:02: [irq 8]
[ 0.686580] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.686614] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.686626] pnp 00:03: [io 0x00f0]
[ 0.686635] pnp 00:03: [irq 13]
[ 0.686664] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.686677] pnp 00:04: [io 0x002e-0x002f]
[ 0.686679] pnp 00:04: [io 0x004e-0x004f]
[ 0.686681] pnp 00:04: [io 0x0061]
[ 0.686683] pnp 00:04: [io 0x0063]
[ 0.686684] pnp 00:04: [io 0x0065]
[ 0.686686] pnp 00:04: [io 0x0067]
[ 0.686688] pnp 00:04: [io 0x0068]
[ 0.686692] pnp 00:04: [io 0x006c]
[ 0.686693] pnp 00:04: [io 0x0070]
[ 0.686695] pnp 00:04: [io 0x0080]
[ 0.686697] pnp 00:04: [io 0x0092]
[ 0.686699] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.686701] pnp 00:04: [io 0x03e0-0x03e1]
[ 0.686703] pnp 00:04: [io 0x0680-0x069f]
[ 0.686704] pnp 00:04: [io 0x0500-0x050f]
[ 0.686706] pnp 00:04: [io 0x0600-0x0603]
[ 0.686708] pnp 00:04: [io 0xffff]
[ 0.686710] pnp 00:04: [io 0x0400-0x047f]
[ 0.686712] pnp 00:04: [io 0x1180-0x11ff]
[ 0.686714] pnp 00:04: [io 0x164e-0x164f]
[ 0.686716] pnp 00:04: [io 0xfe00]
[ 0.686787] system 00:04: [io 0x03e0-0x03e1] has been reserved
[ 0.686790] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.686792] system 00:04: [io 0x0500-0x050f] has been reserved
[ 0.686795] system 00:04: [io 0x0600-0x0603] has been reserved
[ 0.686798] system 00:04: [io 0xffff] has been reserved
[ 0.686801] system 00:04: [io 0x0400-0x047f] has been reserved
[ 0.686803] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.686806] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.686808] system 00:04: [io 0xfe00] has been reserved
[ 0.686812] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.686855] pnp 00:05: [io 0x0070-0x0077]
[ 0.686887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.687090] pnp 00:06: [io 0x0060]
[ 0.687092] pnp 00:06: [io 0x0064]
[ 0.687102] pnp 00:06: [irq 1]
[ 0.687136] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.687159] pnp 00:07: [irq 12]
[ 0.687192] pnp 00:07: Plug and Play ACPI device, IDs SYN102f SYN1000 SYN0002 PNP0f13 (active)
[ 0.687294] pnp 00:08: [mem 0xf0501100-0xf05013ff]
[ 0.687304] pnp 00:08: disabling [mem 0xf0501100-0xf05013ff] because it overlaps 0000:00:1c.3 BAR 14 [mem 0xf0500000-0xf05fffff]
[ 0.687363] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.687680] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.687682] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.687685] pnp 00:09: [mem 0xfed1b000-0xfed1bfff]
[ 0.687687] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.687689] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.687692] pnp 00:09: [mem 0xf090a000-0xf090afff]
[ 0.687694] pnp 00:09: [mem 0xc0000000-0xc0000fff]
[ 0.687696] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.687698] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[ 0.687700] pnp 00:09: [mem 0xfed40000-0xfed44fff]
[ 0.687702] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.687704] pnp 00:09: [mem 0xff808000-0xff8080ff]
[ 0.687706] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.687708] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.687789] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.687792] system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.687795] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.687798] system 00:09: [mem 0xf090a000-0xf090afff] has been reserved
[ 0.687801] system 00:09: [mem 0xc0000000-0xc0000fff] has been reserved
[ 0.687804] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.687807] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.687809] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.687812] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.687815] system 00:09: [mem 0xff808000-0xff8080ff] has been reserved
[ 0.687818] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.687821] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.687825] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.687979] pnp 00:0a: [bus ff]
[ 0.688027] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.688111] pnp: PnP ACPI: found 11 devices
[ 0.688112] ACPI: ACPI bus type pnp unregistered
[ 0.695455] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 07-07] add_size 1000
[ 0.695460] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-07] add_size 200000
[ 0.695474] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a-0a] add_size 200000
[ 0.695489] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0b] add_size 200000
[ 0.695507] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.695511] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.695514] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.695517] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.695523] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.695528] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0300000-0xc04fffff 64bit pref]
[ 0.695532] pci 0000:00:1c.6: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
[ 0.695536] pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.695540] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
[ 0.695544] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.695547] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.695552] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.695556] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.695561] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
[ 0.695566] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.695576] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.695585] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
[ 0.695597] pci 0000:07:00.0: BAR 0: assigned [mem 0xf0500000-0xf0500fff]
[ 0.695606] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[ 0.695614] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.695623] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.695632] pci 0000:00:1c.3: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.695643] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
[ 0.695651] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.695661] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.695670] pci 0000:00:1c.4: bridge window [mem 0xc0300000-0xc04fffff 64bit pref]
[ 0.695681] pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
[ 0.695689] pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
[ 0.695699] pci 0000:00:1c.6: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.695708] pci 0000:00:1c.6: bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
[ 0.695719] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[ 0.695810] pci 0000:00:1e.0: setting latency timer to 64
[ 0.695819] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.695822] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.695824] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.695827] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.695829] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.695832] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.695834] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.695837] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.695839] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
[ 0.695842] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.695844] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.695847] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.695849] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
[ 0.695852] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
[ 0.695854] pci_bus 0000:07: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.695857] pci_bus 0000:07: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.695860] pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
[ 0.695862] pci_bus 0000:0a: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.695865] pci_bus 0000:0a: resource 2 [mem 0xc0300000-0xc04fffff 64bit pref]
[ 0.695867] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
[ 0.695870] pci_bus 0000:0b: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.695872] pci_bus 0000:0b: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
[ 0.695875] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
[ 0.695877] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
[ 0.695880] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.695882] pci_bus 0000:0c: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.695885] pci_bus 0000:0c: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.695887] pci_bus 0000:0c: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.695889] pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.695937] NET: Registered protocol family 2
[ 0.696062] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.696834] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.700123] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.700521] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.700523] TCP: reno registered
[ 0.700532] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.700576] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.700689] NET: Registered protocol family 1
[ 0.700925] pci 0000:01:00.0: Boot video device
[ 0.700998] PCI: CLS 64 bytes, default 64
[ 0.701042] Unpacking initramfs...
[ 0.770927] Freeing initrd memory: 2876k freed
[ 0.771345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.771348] Placing 64MB software IO TLB between ffff8800bb27c000 - ffff8800bf27c000
[ 0.771350] software IO TLB at phys 0xbb27c000 - 0xbf27c000
[ 0.771376] Simple Boot Flag at 0x36 set to 0x1
[ 0.772092] audit: initializing netlink socket (disabled)
[ 0.772103] type=2000 audit(1340054803.739:1): initialized
[ 0.772500] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.774515] VFS: Disk quotas dquot_6.5.2
[ 0.774565] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.774667] msgmni has been set to 7888
[ 0.774904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.774945] io scheduler noop registered
[ 0.774947] io scheduler deadline registered
[ 0.775005] io scheduler cfq registered (default)
[ 0.775409] intel_idle: MWAIT substates: 0x1120
[ 0.775425] intel_idle: v0.4 model 0x1E
[ 0.775426] intel_idle: lapic_timer_reliable_states 0x2
[ 0.775522] GHES: HEST is not enabled!
[ 0.775587] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.776198] Linux agpgart interface v0.103
[ 0.776298] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.778912] i8042: Detected active multiplexing controller, rev 1.1
[ 0.780103] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.780135] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.780159] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.780182] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.780206] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.780325] mousedev: PS/2 mouse device common for all mice
[ 0.780386] rtc_cmos 00:05: RTC can wake from S4
[ 0.780540] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.780579] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.780731] cpuidle: using governor ladder
[ 0.780936] cpuidle: using governor menu
[ 0.781081] TCP: cubic registered
[ 0.781191] NET: Registered protocol family 10
[ 0.781396] NET: Registered protocol family 17
[ 0.781401] Registering the dns_resolver key type
[ 0.781617] PM: Hibernation image not present or could not be loaded.
[ 0.781628] registered taskstats version 1
[ 0.782385] rtc_cmos 00:05: setting system clock to 2012-06-18 21:26:43 UTC (1340054803)
[ 0.782538] Initializing network drop monitor service
[ 0.787227] Freeing unused kernel memory: 740k freed
[ 0.787390] Write protecting the kernel read-only data: 8192k
[ 0.798480] Freeing unused kernel memory: 1588k freed
[ 0.803291] Freeing unused kernel memory: 640k freed
[ 0.809999] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.820218] udevd[71]: starting version 185
[ 0.862439] usbcore: registered new interface driver usbfs
[ 0.862464] usbcore: registered new interface driver hub
[ 0.862584] usbcore: registered new device driver usb
[ 0.864859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.864926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.864935] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.864962] SCSI subsystem initialized
[ 0.864965] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.865005] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.869004] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.869030] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0906000
[ 0.871261] libata version 3.00 loaded.
[ 0.876370] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.876586] hub 1-0:1.0: USB hub found
[ 0.876591] hub 1-0:1.0: 3 ports detected
[ 0.876821] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.876830] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.876839] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.876872] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.880874] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.880892] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0907000
[ 0.889704] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.890152] hub 2-0:1.0: USB hub found
[ 0.890161] hub 2-0:1.0: 3 ports detected
[ 0.890447] ahci 0000:00:1f.2: version 3.0
[ 0.890546] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.890615] ahci: SSS flag set, parallel bus scan disabled
[ 0.890674] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x39 impl SATA mode
[ 0.890686] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 0.890697] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.911919] scsi0 : ahci
[ 0.912284] scsi1 : ahci
[ 0.912722] scsi2 : ahci
[ 0.913201] scsi3 : ahci
[ 0.913668] scsi4 : ahci
[ 0.914080] scsi5 : ahci
[ 0.914267] ata1: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908100 irq 45
[ 0.914274] ata2: DUMMY
[ 0.914277] ata3: DUMMY
[ 0.914288] ata4: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908280 irq 45
[ 0.914297] ata5: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908300 irq 45
[ 0.914305] ata6: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908380 irq 45
[ 1.183077] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.233004] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.234228] ata1.00: ATA-8: Hitachi HTS725050A9A360, PC4OC71E, max UDMA/133
[ 1.234236] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.235728] ata1.00: configured for UDMA/133
[ 1.236338] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
[ 1.307636] hub 1-1:1.0: USB hub found
[ 1.307879] hub 1-1:1.0: 6 ports detected
[ 1.416267] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.540814] hub 2-1:1.0: USB hub found
[ 1.540943] hub 2-1:1.0: 8 ports detected
[ 1.556222] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.609698] usb 1-1.6: new high-speed USB device number 3 using ehci_hcd
[ 1.696049] hub 1-1.6:1.0: USB hub found
[ 1.696420] hub 1-1.6:1.0: 4 ports detected
[ 1.772758] Refined TSC clocksource calibration: 1728.999 MHz.
[ 1.772767] Switching to clocksource tsc
[ 1.806556] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[ 1.876031] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.877305] ata5.00: ATAPI: MATSHITABD-CMB UJ141EL, 1.00, max UDMA/100
[ 1.879554] ata5.00: configured for UDMA/100
[ 1.885075] scsi 4:0:0:0: CD-ROM MATSHITA BD-CMB UJ141EL 1.00 PQ: 0 ANSI: 5
[ 1.963102] usb 1-1.6.3: new low-speed USB device number 4 using ehci_hcd
[ 2.081481] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.0/input/input1
[ 2.081639] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6.3/input0
[ 2.087742] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.1/input/input2
[ 2.087898] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6.3/input1
[ 2.087938] usbcore: registered new interface driver usbhid
[ 2.087942] usbhid: USB HID core driver
[ 2.122996] usb 1-1.6.4: new full-speed USB device number 5 using ehci_hcd
[ 2.202563] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.212058] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.212151] sd 0:0:0:0: [sda] Write Protect is off
[ 2.212155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.212192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.212943] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.4/1-1.6.4:1.0/input/input3
[ 2.213029] generic-usb 0003:1532:0016.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1a.0-1.6.4/input0
[ 2.216135] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.216142] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.216400] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.289258] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 2.292307] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.310870] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.444092] udevd[177]: starting version 185
[ 5.002214] loop: module loaded
[ 5.065477] vboxdrv: Found 8 processor cores.
[ 5.066064] VBoxDrv: dbg - g_abExecMemory=ffffffffa01d0080
[ 5.068417] vboxdrv: fAsync=0 offMin=0x19f offMax=0x349c9
[ 5.068586] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.068591] vboxdrv: Successfully loaded version 4.1.16_OSE (interface 0x00190000).
[ 5.281919] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 5.291812] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 5.291980] ACPI: Power Button [PWRB]
[ 5.292078] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 5.293167] ACPI: Lid Switch [LID]
[ 5.293233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.293269] ACPI: Power Button [PWRF]
[ 5.337928] firewire_ohci 0000:07:00.0: enabling device (0104 -> 0106)
[ 5.391330] firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[ 5.392558] EDAC MC: Ver: 2.1.0
[ 5.393911] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
[ 5.403663] iTCO_vendor_support: vendor-support=0
[ 5.414889] atl1c 0000:0b:00.0: version 1.0.1.0-NAPI
[ 5.420966] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.421163] iTCO_wdt: Found a PM55 TCO device (Version=2, TCOBASE=0x0460)
[ 5.421406] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.486165] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
[ 5.489677] cfg80211: Calling CRDA to update world regulatory domain
[ 5.493598] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
[ 5.494085] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
[ 5.494588] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
[ 5.494973] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
[ 5.495403] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
[ 5.495752] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
[ 5.496144] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
[ 5.496599] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.505428] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.522793] ACPI: AC Adapter [ACAD] (on-line)
[ 5.523752] acpi device:02: registered as cooling_device0
[ 5.523855] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 5.523909] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.526016] ACPI: Requesting acpi_cpufreq
[ 5.536953] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 5.536961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.626562] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.626568] ACPI: Thermal Zone [THRM] (58 C)
[ 5.891343] firewire_core 0000:07:00.0: created device fw0: GUID 01cf13fe00000700, S400
[ 5.971026] ACPI: Battery Slot [BAT1] (battery present)
[ 5.972094] wmi: Mapper loaded
[ 6.108672] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 6.113558] input: Toshiba input device as /devices/virtual/input/input9
[ 6.124400] sdhci: Secure Digital Host Controller Interface driver
[ 6.124402] sdhci: Copyright(c) Pierre Ossman
[ 6.172992] nvidia: module license 'NVIDIA' taints kernel.
[ 6.172995] Disabling lock debugging due to kernel taint
[ 6.181396] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 6.181403] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 6.181419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.181624] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012
[ 6.186591] Registered led device: toshiba::illumination
[ 6.190693] sdhci-pci 0000:07:00.1: SDHCI controller found [1217:8120] (rev 1)
[ 6.190943] Registered led device: mmc0::
[ 6.192014] mmc0: SDHCI controller on PCI [0000:07:00.1] using ADMA
[ 6.228634] rtl8192se: FW Power Save off (module option)
[ 6.228664] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[ 6.228665] Loading firmware rtlwifi/rtl8192sefw.bin
[ 6.251712] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 6.262400] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 6.317500] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 6.320857] hda_intel: Disabling MSI
[ 6.427141] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1e0b1, caps: 0xd04733/0xa40000/0xa0000
[ 6.469682] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 6.717972] Linux media interface: v0.10
[ 6.729300] Linux video capture interface: v2.00
[ 6.997745] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130)
[ 7.020114] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input12
[ 7.020201] usbcore: registered new interface driver uvcvideo
[ 7.020204] USB Video Class driver (1.1.1)
[ 7.153982] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
[ 7.154292] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
[ 7.154446] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
[ 7.154578] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
[ 13.241349] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 13.273608] EXT4-fs (sda5): mounted finTia89 wrote:try to downgrade the kernel with a working version
Thanks for your reply! Actually, yesterday I upgraded to the new kernel (version 3.4.3-1) and my laptop has not freezed since then. So, maybe I will wait for a couple of days and hopefully mark this as solved. -
Qosmio X505-Q875 - Can't install my work software package
I have to say I'm extremely disappointed in Toshiba. I'm a small business owner and use some pretty advanced software for which I pretty much need a gaming style laptop for. After looking at many different companies, including custom high end builders, I settled on a x505-q875 that I purchased from Newegg.
First of all, I couldn't even install my primary work software package. This software uses a USB hasp for anti-piracy. The HASP wouldn't install, no matter what I did. After exhausting my options, I opted for a clean install of Windows. I have a full Windows 7 license which allows for laptop installation. So I wiped the laptop clean and started with a clean slate. I go onto the Toshiba website to get the component drivers and ...whoa!...they aren't there! Luckily for me, and a couple of hours into the process, I did manage to find a driver for the Nvidia GTS 360m. Fortunately, some guy had posted online a workable driver that supports the 360M. That one could have sunk me. This laptop had to be operational for a business trip I am going on tomorrow.
I hope Toshiba reps at least browse this forum and if so, these are the points I would like to make.
1) If you have released units to resellers of any product, there HAS to be driver support online. I never make backup discs as I've never had to. Every time I ever needed a driver, it was on the support site. There is no excuse for this. This product doesn't have a "release date". As a consumer, when I purchase something, I expect the support to be available when the product hits the shelves.
2) In your "detailed" product specs, how about mentioning who supplied the wi-fi cards? Simply saying "Wi Fi Card" really isn't going to help anyone fishing for a driver. Thankfully, you guys haven't changed and it was still the RealTek wireless card.
3) It is important that Windows be left as vanilla as possible, for people like myself who use these things for business. A lot of business productivity software does not like being installed on OEM modded versions of an operating system. I don't know if it were the mods or the 50 tons of bloatware on the machine but when I can't get a USB device to install, thats a serious issue. As for the bloatware, how about making most of it downloadable content? Most people have no need for most of the stuff you cram into the machine.
So in closing, a disappointing experience so far. I hope the machine is problem free from this point on because I invested 7 hours in diagnosing, searching, pulling my hair out, reinstalling operating systems, etc. Now that the slate is clean, the thing works like a champ with my software.> 1) If you have released units to resellers of any product, there HAS to be driver support online. I never make backup discs as I've never had to. Every time I ever needed a driver, it was on the support site. There is no excuse for this. This product doesn't have a "release date". As a consumer, when I purchase something, I expect the support to be available when the product hits the shelves.
Qosmio X505-Q875 belongs to Toshiba US series and the drivers should be downloaded from the Toshiba US page.
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
There you can find everything regarding the Qosmio X505-Q875.
> 2) In your "detailed" product specs, how about mentioning who supplied the wi-fi cards? Simply saying "Wi Fi Card" really isn't going to help anyone fishing for a driver. Thankfully, you guys haven't changed and it was still the RealTek wireless card.
Qosmio X505-Q875 and other notebook series are equipped with different WLan cardsIntel, Atheros or Realtek. At the bottom of the unit you can find a label which contains a info what WLan card has been installed or go to device manger and check VendorID to get details about WLan chip manufacturer. ;)
> 3) It is important that Windows be left as vanilla as possible, for people like myself who use these things for business. A lot of business productivity software does not like being installed on OEM modded versions of an operating system. I don't know if it were the mods or the 50 tons of bloatware on the machine but when I can't get a USB device to install, thats a serious issue. As for the bloatware, how about making most of it downloadable content? Most people have no need for most of the stuff you cram into the machine.
Dont understand what you want to say and what you mean by bloatware but the point is that new generation notebooks supports a lot of different features which need to be controlled by software
Of course you can remove everything what you want but you should not wonder if some feutures like FN buttons, multimedia buttons, face reorganization, power saving eco mode etc will not functions
If you are not able to install the 3rd USB device then you should get in contact with this USB device manufacture. Maybe there are some Win 7 compatibility issues
I installed Win 7 on my Toshiba notebook and everything is running like a dream all devices are recognized. I have managed to collect the Win 7 drivers at my own hand but this is not really a problem for common notebook user like me who know how to use google and search in internet
Greets -
Toshiba Qosmio X505 plugged in, not charging message
I have a Toshiba Qosmio X505 that is almost 4 years old and have some power issues. The battery is drained to about 6% and the battery icon in the tool bar has the plug symbol for a second then it goes away then comes back and goes away.... it keeps flashing like this. When I move the mouse over the battery icon it says plugged in, not charging. I have tried every solution I have found on line with no luck. I have removed the battery and ac charger and then held the power button for 30 seconds, I have cleaned the connections, I have re-installed the battery about 10 times, I have rebooted all to no avail.
When I remove the ac adapter the power light is off and the battery light is orange. When I remove the battery and plug in the ac adapter the power light is steady red. As soon as I put the battery in the ac power light begins to blink on and off. The computer does not power on with the battery removed and the ac adapter plugged in (but I'm not sure if it's supposed to). I will also add that in the last week or so when I power on I would get a black screen saying an NTFS file is bad and the machine wants to do a disk check. The disk check never runs, even when I try to do it manually.
I have read this could be a motherboard issue, an ac adapter issue, or a battery issue. I am hopoing a replacement battery fixes the problem. Before buying a battery I was hoping someone had some info to share. ThanksI bought a battery hoping that takes care of the problem. If that doesn't work I will try a new adapter and if that doesn't work I will probably just remove the hard drive and use it as an external on a new machine. Seems there really isn't a whole lot of info out there about this problem other than the start button solution.
-
Toshiba Qosmio X505-Q870 power button unresponsive but laptop powers up using media control button
Well this is perplexing, I could really use some help.
My power button on my Qosmio X505-Q870 is completely unresponsive. I've tried holding it for 30 seconds, but to no avail. I removed the battery & replaced the battery, testing the power button by pressing it for 30 seconds or rapidly pressing it - makes no difference whatsoever. But then, I noticed if I touch the media touch button, the computer powers up! (And opens up Windows Media Player) Very stealthy...
Now when the laptop is already powered up, pressing the media button does not turn it off. It only opens Windows Media Player.
Here is some background info that may or may not be helpful:
1 1/2 years ago:
RAM was upgraded to 8 MB
I replaced the HDD with a SSD, and then installed the HDD into the 2nd bay.
Computer has been running fine since these changes, aside from running hot when gaming.
2 days ago:
I upgraded the SSD to a larger drive.
Then, I disassembled the laptop with the intent to apply some thermal compound and clean the fans to address the temperature issues. I could not complete this task because 2 screws were stripped and I couldn't get the cover off, afterall.
I did not swap any connections, but did notice one seemed a bit loose after carefully lifting up the keyboard so I gently eased it back in to place.
I put the laptop back together, and that is when the power button and media center button issue began. So it must be a result of either opening the case or upgrading the SSD.
Any thoughts on what could be causing this to happen?
And if anyone has a trick to remove stripped screws without taking a drill to my laptop - I'd love to hear your ideas. Thanks!!nTia89 wrote:try to downgrade the kernel with a working version
Thanks for your reply! Actually, yesterday I upgraded to the new kernel (version 3.4.3-1) and my laptop has not freezed since then. So, maybe I will wait for a couple of days and hopefully mark this as solved. -
Toshiba Qosmio x505-q870 Issues
Hi, i'm a proud owner of this laptop and its served me very well for the past 3 years.
Recently i'm having some heat issues where i think the computer is starting to hang/freeze around 75c. I've checked some other forums and folks say thermal shutdown is MUCH higher than that so i'm kinda curious at why its happening. Naturally i've cleaned out all the vents, got a laptop cooler, got rid of as much bloatware, and minimized my HDD usage for as much efficiency as i can squeeze out of the machine. Not too sure what the next step would be to try to minimize the heat. At rest with the cooler fan i'm looking at 50c while during intense gaming 65-75c, which is where the freezing, BSOD, and other bad things occur.
I've also ugraded my RAM. i bought 2 sticks of 4 gig Patriot PC3-12800 1600 MHz CL11 1.35v RAM, which are technically compatible as they are the same speed and size as the ram also sold via the Toshiba website. My first game with the new RAM showed massive improvement in FPS. However shortly into the next round it froze up where i needed to do a cold shutdown. Thinking nothing of it, I restarted and began another game and the same thing happened again where it froze. After that point i stopped to reassess my options. Heat was also extremely high, but that was nothing out of the norm for my current situation.
After some quick research on what i shoud do, i ran Memtest86 which came back clean after 20 passes, updated my BIOs from v2.3 to v2.9, and tried to get into the BIOs to try to change the voltage being sent into the RAM. My old ram had 1.5v while the new ones were at 1.35v. I ran the program cpu-z to see what voltage it was being run at, and it was set at 1.28v so apparently there's something going on. Unfortunately in the BIOs i couldnt find how to change the voltage settings, so i'm currently at a loss what to do. Some more reading has brought to my attention that the fans might not also be working at full capacity. I also tried to see how i can adjust my fan speeds in the BIOs and again came to a loss.
What do i do to try to minimize my heat burden and try to get my RAM integrated smoothly?Qosmio X505-Q870 Specifications
Qosmio X505-Q870 Downloads
Event ID: 9 Source: iaStor
Let's try to reinstall your core chipset & HDD driver set. Download these files to your desktop and double click to install them in this order:
Intel Chipset SW Installation Utility
Intel Rapid Storage Technology Driver
See if this improves the situation at all. Please let us know what happens. Good luck.
Mike -
I had my laptop for about two years now and it has worked great with the exception of it overheating. Now I am starting to have a number of issues:
1. Blue screen memory dump while playing games. It said something about Kendal hardware. I did research and it said that this is an idication of hardware damage.
2. Computer freezing while playing games
3. Computer freezing just being on desk top.
4. Blue screen memory dump while on desk top
5. Screen going black while playing games.
6. screen going black while on desk top
7. Windows freezing while computer is starting up.
8. I was playing a game and my computer started making a random noise then shut down.
9. was doing a memory diagnostic and it completed but when windows was starting up again my computer froze so I was not able to see the report.
I did scan disk, did a computer restore point, defragment and some other stuff. I think it may be hardware damage because the computer over heated. And all of these problems just started happening all at once.. it did not snow ball or anything. Any advice would be great. Thank you.I agree with GordOfTheJungle, it is probably due to the overheating issue. If it is under warranty, definitely take advantage of the factory service. If it isn't, and you are not a "do it yourself" type person, then a repair center is the way to go. If you work on your own systems, the X505 is a little more complex to service than most of the laptops I have worked on, but not by much.
I would highly recommend cleaning the vents at least once a year, and applying fresh Artic Silver thermal compound to the processor. Even running an extreme processor in my X505, I have not experienced any cooling issues.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)
Maybe you are looking for
-
Javascript error while selecting select option...
Hi developers, I am new to javascript. Now i am developing Application form. In my form when i am selecting country in sleect box then automatically load states in states select box. This is my code... <%@ page contentType="text/html; charset=iso-885
-
Technical systems in SLD are deleted
Hello Experts, I have a problem with my new NW PI 7.01 System. I have installed it some days ago and it was running until yesterday. I created two technical and business systems. But now they are away. In the SLD I cant find them anymore. I wanted to
-
MacBook Pro Overheating under bootcamp
Hey all. I have been having a massive overheating problem with my MBP when trying to play games under bootcamp and windows XP. - I have called Apple Support - they were not much help save to tell me not to place the computer on my lap. - I do not hav
-
I accidently deleted my Photoshop CC and can't redownload.
I was having quite a bit of issues with my Photoshop CC and after asking a coworker realized i was the only one having those issues. So i decided to uninstall it and then reinstall. Now in previous versions of Mac OS you can uninstall programs by del
-
Why My Screen Painter Only can Edit Specific Attributes
In my Screen Painter, i only can edit the item's specific Attr,like Caption,but I can't edit the uniqueID,Type..... The specific Attr has a EditTxt dialog that i can enter my value,but for the items, it seems disapear. I only see the Attr Name and sc