QT Broadcaster messed PhotoBooth settings up!!!!

Just to try it out, I installed QT Broadcaster (an Apple product). I played around with it for a while; changed compression settings on both video and audio etc. When I found the software was not intresting for me, I deleted all the files (3 of them) that has anything to do with the software.
Today, I tried to record in PhotoBooth - just as usual. I was really surprised when I found the recorded material to be really, really "choppy", with skipped frames and a lot of other strange things happening to the material.
What has happened? I tried to delete the PhotoBooth plist, but I did not help. The videos still looks jerky and choppy. But they seems OK while recorded in the PhotoBooth previewwindow.
I'm eager to get th is fixed as soon as possible!!
THANK YOU! =)

Boot up from your Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
Once this process has been completed restart your computer.

Similar Messages

  • HT4864 Thank you! This may sound lame but are these instructions for the blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there.

    Thank you! This may sound lame but are these instructions for my blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there. Thanks again!

    You don't need to start a new thread to continue a conversation, you can just tack onto the original one. The settings I referred you to are for the Blackberry, since that's the device which is not receiving mail: anything which is working can be left alone.

  • Cannot broadcast video- cam settings panel unresponsive- OSX 10.4.11

    Aloha,
    I have a Mac G4, DP 1Gb Power PC computer running OSX 10.4.11. About a week ago I tried to connect to a video chat room, which I had visited many times before and used successfully for the past couple of years. When the site asked for access to my cam - to accept or deny access - the camera settings dialogue box was unresponsive. I tried a couple of other sites as well and the same thing happened: the camera settings box appeared, but didn't work.
    At that time I was running a slightly older version of Flash, so I decided to uninstall it and install the latest version: MAC 10,1,102,64. I did that, and tried again to broadcast and the same thing happens. TheTroubleshoot Flash Player | Mac OS page confirms that it is installed properly and detects the new version,
    When i go to http://www.testwebcam.com/ the Adobe Flash Player Settings box shows up at the top of the page. If I click "Allow" or "Deny" nothing happens.
    I spent hours looking around the support area and have found no answers, nor was live support helpful except for  suggesting that I go to this forum. Can anyone please help me?

    Hi, Since I don't use cameras nor chat rooms, the only thing I have on this would be the following. This was posted by another user with a PC as far as I know.
    Well, I finally got my problem fixed.  My camera is now working in chat rooms.
    Thanks for all input!
    Seems as if all camera settings are stored on Adobe's Flash web site:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/se ttings_manager.html
    Here you must set your camera settings - especially Website Privacy Settings panel
    and Peer-Assisted Networking Panel
    One must visit:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/se ttings_manager.html
    For each and every browser they use.
    Hope that is helpful, if not, then perhaps someone will post that has more information for you.
    eidnolb

  • Broadcasting PDF format settings

    Hi all,
    I have to send query views in PDF format by broadcasting, but the report is bigger than one page. When the user opens it in PDF cannot modify the margins, and can not modify any printer settings, the report will be very-very small in the middle of the page. Does anyone know, who can i modify the PDF settings before send the broadcasting out?
    thanks in advance
    Adrienn

    Hi,
    You can make settings in the Broadcaster Wizard.

  • Advice me how to add PERSONS (2) broadcast report SDT_PP_MM_01& settings

    Hi Expertts,
    How to add perrsons name (newly) in Automatic Broad casting report which is already running.
    But one of my friend adviced me to do settings for" To make these changes, you must maintain the Setting SDT_PP_MM_01_S01 in the web report BRD_PP_mm_01. These changes should be made directly on PE8".
    Please advice me , it's urgent for client requirement.
    I will difinietely assingn points for this.
    Thanks in Advance,
    Thanks,
    Kumar.

    Hi SG,
    BUT WHEN I ENTER THE NAME OF THE WEB REPORT BRD_MM_01 AFTER OPENING THE REPORT , I WAS CLICKING ON PUBLISH---> AS BEX BROAD CASTER AND NEW SCREEN  COMES WITH LOGON DETAILS
    AFTER ENTERING THE LOGON DETAILS IT IS SHOWING ME THE SETTINGS FOR NEW USERS LIKE CREATE SETTINGS.
    I WAS NOT ABLE TO ADD THE NEW USERS IN THAT BECUASE AFTER ENTERING THE USERNAEM AND MAIL ID'S IT'S GIVING ME THE MESSAGE LIKE THESE USERS ARE NOT VALID BW USERS.
    BUT FOR AUTOMATIC BROADCAST OF THIS REPORT NO NEED OR BW USER I.E. I CAN BROAD CAST THIS REPORT TO ANY USER (RIGHT OR NOT)
    AND ALSO IT IS ASKING ME THE ROLE OF THE USER ALSO.
    PLEASE ADVICE ME .
    THANKS IN ADVANCE,
    REGARDS,
    KUMAR.

  • Broadcast safe filter settings

    Hello,
    I applied the broadcast safe filter to a PNG file (logo) that has excessive whites. However, when I switch - what I believed were presets (130 / 120 / 115 / etc.) nothing changes and nothing happens at all actually!
    The only thing that seems to do anything is when I dial the Max RGB Output level switch...

    Max_Iqueu wrote:
    Yes. I am looking at the scopes and "nothing" is happening.
    Then the question rises:
    What are the maximum values in the scope? If none of the levels is exceeding the 100 you don't have a problem.
    Also the values (numbers in the filter) don't switch.
    The values will not swith. The top button 'Luma Chroma Mode' swithes between
    • 'CUSTOM - User Control Below' Which will let YOU control the sliders
    • one of the presets (Conservative, Extremely conservative, etc) Then the plugin will use PRESET settings. It won't have a look at the sliders (iow, you cannot tweak a preset). Nor will it update the value of the sliders.
    The language the plugin is written in (FxScript), just doesn't provide feedback to the sliders.
    So it's either using one of the presets OR select CUSTOM and play with the sliders
    I was wondering if it was due to the PNG file type? ...
    No. .mov or .png it's all the same to the filter

  • Broadcast safe effect settings for PAL on MPEG source

    Hello,
    I've been delivered a clip (shot on iphone ((29.97)), edited on Prem CC, exported as a 1920 x 1080 MPEG.
    When applying broadcast safe filters I apply two to an adjustment layer. One set to reduce luminance at 99 (IRE), another to reduce saturation at 99 (IRE). When this is applied I get some quite heavy artifacts on high luma sections of the video. In this instance an LED illuminated train timetable, making the destinations/times unreadable.
    I've not had this problem before, so I'm guessing it may be due to the clip I received being a 29.97 MPEG? Is there any way to resolve this?

    Hi Paulie_LL,
    Thanks for posting on Adobe forums,
    Please provide following information :
    What is the OS and version ?
    What is the Graphics Card installed on the system ?
    How much Ram do you have ?
    Do you use any external Hard Drive ?
    Are you using security software e.g. Norton, etc?
    Regards,
    Sandeep

  • Just installed 10.6.8, and now iTunes won't recognize my iPad2 when I plug it in.  Did I mess up some settings?

    After moving up to OS10.6.8, iTunes no longer reognizes my iPad2 when I connect them.  Is it the new system, or did I mess up settings on the Pad?  I want to install iOS5 on the iPad.

    See this thread: iTunes 12.1 Not Finding iPhone

  • Best export settings? Post your tips!

    I have been using iMovie for a long time. I have messed with settings quite a bit but the files always come out huge. I have seen other people's QT movies with great image quality for small file size. I have no idea how they do it.
    My best experience in iMovie is to use the CD-ROM setting for export. This gives it the window size that I want, with a small file size, while maintaining pretty good image quality.
    I'm talking about custom settings here. I need something other than the pre-made settings. There are so many custom options, but they're all way over my head. My goal is to use something other than h264, but keep the CD-ROM quality and size.
    Does anyone have any good custom settings they recommend for getting a good balance of dimensions, image quality, and file size?
    If so, post your tips! Let us know your favorite export settings!
    --Timothy

    The export settings are determined by the way the file is to be viewed.
    "Local" files (those on CD's or fast networks) can be much larger in file size because bandwidth isn't much of an issue. Sent to iDVD and they make great videos that can only play in DVD players or software.
    "Web" based files are a new can of worms because each persons opinion of "good" and also "small" file size differ so much.
    Best advice anyone can give you is for you to make your own sample export "tests":
    Take a minute sample (a part that has high action and motion) and choose the "Expert Settings" to send the file to QuickTime.
    Try various video codecs and adjust the data and frame rate to raise or reduce file size.
    Try AAC audio (very popular audio format) but set the frequency to "half" of CD quality (22050 Hz). This will be half as large in file size.
    If your camera didn't record in stereo (most don't) set the file to mono and you reduce the file size in half again.
    Compression is nearly an art form and the options in the expert settings can be a bit confusing.

  • Urgent:information Broadcasting

    Hello Gurus,
       i am sending workbook to emails which contains budget vs actual comparsion
    the following error is coming:
       -Precalculation failed: E Object variable or With block variable not set.
       -Cannot precalculate workbook Daily Production Variance Report.
       -Error occurred during processing of framework class   CL_RSRD_PRODUCER_EXCEL, type PROD 
       waiting for experts reply
    with Reguards,
    Seth M

    Hi,
    This oss note also refers the thirs error specified 926866
    Symptom
    When the user executes(broadcasts) a workbook settings he gets the following error.
    Activex component cannot create object.
    or
    ( RSRPREC 509 ) Precalculation failed E
    ( RSRD    107 ) Error occurred during processing of framework class
                    CL_RSRD_PRODUCER_EXCEL, type PROD
    or
    Object variable not set to an instance of the object
    Reason and Prerequisites
    User logged on to the PC where precalculation service is running cannot launch Excel via automation.
    Solution
    Logon to the computer where the precalculation service is installed.
    Goto the windows\system32 folder.
    Launch the "services.msc". (This can be launched via the Control Panel->Administrative Tools->Services.)
    Stop the "SAP BW Precalculation Service".
    Right click on the service and goto "Properties".
    In the Log On tab, select "This Account" radio button.
    Type in the name of the user who would be logged on to the system when precalculation will happen. The username can be browsed in the domain also.
    Example - If the user belongs to sap_all domain the username would be sap_all\ixyz1 where ixyz1 is the user name
    Type in the password and press ok.
    Start the service

  • BEx broadcaster error  NF_ADR

    Dear community,
    does anyone have an idea what is wrong when i get the following error when i execute BEx broadcaster to send me a report via email:
    "Error of type NF_ADR occurred sending document DUMMY.mht  "
    The steps i took to get to this error:
    ran Bex broadcaster from query designer, used the wizzard to setup broadcasting, save the settings, and hit execute, then i get this in a separate window.
    Juraj.

    Hi,
    Most likely the email addresses that are maintained in the settings are incorrect. They do not exist or the is a spelling mistake or the convention is wrong i.e missing '@' symbol or has ',' instead of '.'
    This is particularly common in bursting where it is not immediately obvious that the email address is wrong so in this case check the email addresses maintained in the master data of the characteristic.
    I hope this helps.
    regards,
    Michael

  • How can we use the Information Broadcasting?

    Hi,
    Can any one tell me about Information Broadcasting and its uses in BI 7

    Information broadcasting
    Note 760775 - Settings for Information Broadcasting
    Functions of Bex broadcaster
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/220c40ac368f5ce10000000a155106/frameset.htm
    0QUERY_TEMPLATE_BROADCAST_PDF
    Faq
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0bfcac90-0201-0010-52a3-d5b270b86ef3
    Information broadcasting process chain-
    Information Broadcasting Through Process Chains
    Hope it Helps
    Chetan
    @CP..

  • Broadcaster event data change process step in process chain goes on HOLD

    Hi,
    We have a process step of event data change in process chain for a cube. the broadcaster has some settings built on this to send email whenever data updates happent to that cube.
    It was working fine till last week; suddenly the process started going on sleep or hold mode. i ahve tried deleting old process variant and added new one ...still  the job hangs.
    Also in SOST i can see that the email based on broadcaster setting were sent. Though users havent recieved any. the job logs in SM37 say:
    Job started
    Step 001 started (program RSPROCESS, variant &0000000518457, user ID BIWREMOTE)
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCAST4E9S51L2EFE7AXG4IFUKNJW3W with ID 01462600
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCAST4E9S51L2EFE7AXG4IFUKNJW3W with ID 01462601
    Submit report for report RSBATCH_EXECUTE_PROZESS failed; see long text
    Submit report for report RSBATCH_EXECUTE_PROZESS failed; see long text
    Submit report for report RSBATCH_EXECUTE_PROZESS failed; see long text
    but when i see the job mentioned in this failed step:
    Job started
    Step 001 started (program RSBATCH_EXECUTE_PROZESS, variant &0000001419141, user ID KRANTUL1)
    Precalculation: initialization started
    Precalculation: processing started
    Precalculate data (fill DataStore)
    Processing data provider DP, query CP_NORDIC_IAN023
    Processing data provider GR4Broadcaster, query
    Calculate documents (build documents)
    Start Precalculation Web Templates with Precalculated Data
    Implementing settings finished
    Precalculation: initialization started
    Precalculation: processing started
    Precalculate data (fill DataStore)
    Processing data provider DP, query CP_NORDIC_IAN017
    Processing data provider GR4Broadcaster, query
    Calculate documents (build documents)
    Start Precalculation Web Templates with Precalculated Data
    Implementing settings finished
    Job finished
    So the users should have recieved the email . we have separately tested sending out emails and it works fine. just that process in process chain doesnt get completed at all.
    the slg1 logs are all successful.
    any pointers what could be wrong ?

    Use process the INTERRUPT if the last precalculation and alert messaging are succesful. Guess it is looping with first precalucatation

  • Isight/photobooth no response.

    this is my first mac, a 2GHz macbook pro which arrived this morning.
    the camera worked because it took my photo at the beginning when i was setting up my user account and stuff.
    but everytime i try and open photo booth, i get no response. the toolbar at the very top changes to display the photobooth settings, but there is nothing in the centre appearing.
    i've also tried using isight in imovie, but i get no response either. infact i can't even click anything in imovie, except quit!
    i haven't tried using my isight in ichat yet, as i don't have an AIM or .mac account.
    any help would be much appreciated. thanks.

     Hello, joanna. Congratulations on your new MacBook Pro! I do not have one, but the following may help you get going.
    You should apply the new Mac OS X 10.4.6 Combo for Intel. It offers many improvements for your Mac OS. I suggest an update technique like that explained in How I Update My Mac OS X. Be certain to use the links relevant to the iNtel Macs.
    Does your iSight work with your Apple software now?
    If your problem continues, and if you have external devices connected to your new Mac, shut down, disconnect the external devices, restart your MacBook Pro and try again. You can add devices back one at a time after you get your MacBook Pro working again. Check after every item is attached to determine whether one of your external devices is causing a Possible hardware or software conflicts.
    If your iSight difficulty continues even with nothing connected and after a restart, try any relevant suggestions from the "Troubleshooting" section of your MacBook Pro's User's Guide. If nothing helps, contact the retailer who sold you your MacBook. It is possible that our built-in iSight is defective.
    If you have ANY other problems with your MacBook Pro in addition to those with your iSight, and if you do not get better suggestions from MacBook Pro users here, search for specialized help or post your problem in the dedicated MacBook Pro Discussions area.
    Please let us know how you get your new Mac working properly.
    Cheers,
    Jim

  • BI Broadcasting - Change the sender email address

    Hi All,
    I am using the BI broadcasting to create settings to publish reports.
    When the reports are emailed from the server the users receive them from the user that set up the Broadcasting setting( me).
    I need to somehow change this so that it comes from another user in the SAP system even though they are not the user who created the broadcasting setting.
    Is this possible?
    Thanks

    I did try that but it didnt work.
    Also is it possible to transport the Broadcast schedules? I have successfully transported the Broadcast settings however the schedules are not transporting with the settings.?

Maybe you are looking for