QT RTSP client doesn't display when direct3d acceleration is enabled

Hi ,
I am using Quicktime7.6.5 on WinXP (Core 2 Duo 2.33Ghz and 1GB RAM)as an RTSP client to playback HD streams sent over IP networks by a streaming server.
If direct3d checkbox(edit->preferences->quicktime->advanced) is enabled(by default it is enabled),actual video streamed is not being displayed,but large quicktime icon is displayed .
If direct3d acceleration is disabled actual video is played out, but with lot of jerks because of performance issues as acceleration is disabled.
Instead of RTSP,if the SDP file is directly opened in quicktime to playback same video stream with direct3d enabled, QT plays out without any issues.
Any ideas on enabling smooth playback of HD streams in quicktime(as RTSP client) ?
Thanks and regards
Anil

Flash often crashes here too, since I’ve installed a GeForce card with the nvidia blob. I think it’s pretty common.
For youtube and some other video sites you can use the GreaseMonkey script ViewTube in order not to use Flash.

Similar Messages

  • Outlook Web Access doesn't display when in a Page

    Hi guys,
    I have set up an IView to access Outlook Webmail, as per the normal help documents, and the IView works perfectly - displays my Inbox and everything. If I add the IView into a workset, users are able to view their Inbox too.
    However, If I create a Page and put the IView on that page, the Inbox no longer displays - it just has a blank window where the Inbox should appear. Right-clicking on the blank page and going to Properties, I can see that its going to the correct web address.
    My question is, why doesn't the Inbox display when the IView is in a Page?
    Thanks,
    Michael.
    PS, Here's something unusual... In Content Administration --> Portal Content, when I right-click on the Page and choose "preview" it displays the Inbox properly. However, it doesn't display when its accessed from a Workset.

    Yes, I have added the Page to the Workset, and also the IView to the Page.
    If I set up a temporary workset, And assign the 2 objects to it (the IView and the Page), they appear as links at the top of my Portal. When I click the link assigned to the IView, the Inbox is shown. When I click the link assigned to the Page, it only shows a blank window instead of the Inbox.
    Michael.

  • Table style doesn't display when viewed or when project is published

    I'm running RH8 (with RH8 Server).  The table style no longer displays when viewed or when published.  I checked the table style of the same project (but older version) and the styles to me looked the same.  It displayed fine last week (famous last words), but this week something changed. Can anyone help?
    The tablegradient.jpg can be seen in the project (image A), but when I view (eyeglasses), or if I open a published project, it doesn’t (image B).
    Image A
    Image B

    I really do not know what has caused this but in your situation I would be looking at the CSS for the table now and when it worked.
    After that I would probably create a new project and create the same setup afresh. That can often identify the cause of problems like this.
    Sorry I don't have anything more constructive.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • CC desktop client doesn't display available updates

    After a rocky start I was finally able to download the desktop client. It was fine at first and allowed me to install CC trials, update trials, sync settings, etc.
    I'm still able to sync settings and use my software, but CC doesn't display all the new updates that came out recently. It's been like this for a couple days that I know of, and I was able to download all of those updates on Monday from my work machine which is also running trials off the same account.
    Mac OS X 10.8.4
    Creative Cloud 1.0.0.183

    Wow, Adobe customer support is the worst I've ever used. Not these boards, these have helped me a lot in the past, but everything else.
    Support has done nothing but vehemently try to convince me that I don't have a problem. "If CC desktop says 'up-to-date' then it's up-to-date." This has been their mantra. I plead with them, "No, my version of Premiere Pro is at 7.0.0 and the current release is 7.0.1." Then they just read the same line from their script, "If it says 'up-to-date' …"
    One support guy even said to me, after I explained and re-explained my issue many times, "I don't understand, so why is your other computer getting updates and this one is not?" Gee, I don't know, THAT'S WHY I'M CALLING YOU!
    I'm told to try the same basic things I've tried time and time again. I keep getting passed off to other people who quickly give up and tell me there's nothing they can do except pass me off to someone else.
    It's been over a month that I've had this problem, ever since I installed Creative Cloud. I have encountered lots of bugs in the software, there are certain things I cannot do in my apps and I really need to get this resolved.
    Sorry to rant and rave on a forum meant for utility, but this is the worst customer support experience I've ever endured, and I guess i'm trying to illustrate that THIS FORUM IS MY ONLY HOPE.
    Please, any tips, advice, suggestions, any help from you knowledgable forum members is really appreciated. I really like the CC suite in theory, but I can't continue to be a creative cloud member if I am resigned to only using buggy release software for the foreseeable future on my primary computer.
    I am not going to pay $50 a month for something so broken that I am not getting any support on.
    Thanks,
    Evan

  • Mac doesn't display when powering on

    Everytime I power on my Mac mini, my monitor doesn't display the Apple logo, it is black. Then after a while, It shows the desktop. Can there be something wrong with my system?
    My monitor is connected with a mini display port to a VGA adapter on a VGA monitor? The monitor is a dell 1704FPT

    Try resetting the SMC. Info here:
    http://docs.info.apple.com/article.html?artnum=303446
    Be sure to perform the proper procedure for your specific Mac.

  • Custom ContextMenu doesn't display when using hand cursor

    I have created a custom ContextMenu, which displays when
    right-clicking on the Canvas. If I am showing the hand/pointer
    cursor using the code below, and then right-click, the custom
    ContextMenu is not displayed. Is this a known issue in Flex 3 or is
    there a workaround/fix? Any help is always much appreciated.

    "Guddie" <[email protected]> wrote in
    message
    news:gmcq28$eb$[email protected]..
    > Setting buttonMode = false or mouseChildren = true does
    not fix the issue,
    > and I do need useHandCursor = true.
    Make sure you haven't inadvertently set mouseEvents to false.

  • Outlook 2013 archiving doesn't work when cached mode is enabled

    Hi All,
    I have a problem in Outlook 2013 which I've been able to replicate on two separate PCs, operating against two separate Exchange servers.  In both cases, archiving of old items does not work in Outlook 2013 when cached mode is enabled.  It works
    fine if cached mode is switched off so I don't believe the problem is related to the archiving settings.
    Has anyone else come across this?
    Thanks,
    Matt
    Systems Engineer
    BOM Group LTD

    Based on my knowledge, Outlook auto archieve setting is stored in registry and only affects on local host.
    If the AutoArchive doesn't work anymore, please refer to the follow article to troubleshoot the issue
    http://www.howto-outlook.com/faq/archivenotworking.htm
    If we are talking about Microsoft Exchange Online Archiving, I think it would run fine when you in Exchange online mode as your expected.
    Tony Chen
    TechNet Community Support

  • Wifi doesn't work when blue tooth is enabled

    home wifi doesn't work on macbook pro when blue tooth is enabled
    Message was edited by: maggie11

    Based on my knowledge, Outlook auto archieve setting is stored in registry and only affects on local host.
    If the AutoArchive doesn't work anymore, please refer to the follow article to troubleshoot the issue
    http://www.howto-outlook.com/faq/archivenotworking.htm
    If we are talking about Microsoft Exchange Online Archiving, I think it would run fine when you in Exchange online mode as your expected.
    Tony Chen
    TechNet Community Support

  • ARD Client Doesn't Show When Using Scanner and Network Range

    All-
    When I use the Scanner in ARD3 to scan a remote Network Range over the internet, the ARD client that I KNOW EXISTS in that same IP range DOES NOT show up (other ARD clients that I'm not interested in do show up, but not the specific ARD client I need to observe/control).
    If I then call the user at the remote ARD client on the telephone, and have them give me their IP address (using www.whatismyip.com, for example), I can use the Scanner in ARD3 to "find" the ARD client and add it to my All Computers list. Process: change the popup box to read "Network Address" instead of "Network Range" and set the IP address field to the address provided by the user.
    Why doesn't the remote ARD client show up when I scan for it using a Network Range in ARD3? Obviously, I don't want to have to call up each user every time I need to perform maintenance/control a client to get their (dynamic) IP address.
    I could use dynamic DNS, but that's overkill. If I know (from experience) that my ARD clients are in IP ranges X, Y, and Z, then I SHOULD be able to simply scan for them (or so I thought).
    Any help appreceated.

    Updated to ARD3.1 (admin and clients), but that did not solve the issue.
    Let me try to restate the problem:
    The ARD client is out of state/across the country (i.e., different sub-net) using a dynamically assigned IP adddress. I can (for now) connect to that ARD client successfully, and perform all ARD functions (that I've tried so far) becasue I know (for now) that client's IP address (I called and spoke with the user who used www.whatismyip.com to give me their IP address). So what's the problem, you ask?
    Some time in the future, that same ARD client will have a new, dynamically assigned IP address. I'd like to be able to connect to that client without having to call on the telephone and ask the user what IP address they have been assigned now.
    My thinking was that I could make a pretty good guess at their IP address (based on their old IP address, and the way Cable and Telco ISPs allocate/lease IP addresses). For example, if their current dynamic IP address is 999.888.777.45, I could guess that a subsequent dynamically assigned IP address would be in the range 999.888.777.2 to 999.888.777.255. With ARD, I could simply scan that range of network addresses using the Scanner and quickly find the ARD client I want.
    I tried to do just that, and the ARD scanner did not find my client when I scanned the network range that the ARD client was actually in. It showed other ARD clients (that I do not administer, own, or want to hack into), but not the one I do want to observe/control/maintain (and have a legal right to). Somewhat paradoxically, when I used the Scanner to find the same ARD client by specific IP address, there was no problem.
    Why doesn't the ARD Scanner "see" the ARD client when scanning the network range?

  • UCM Routing Client doesn't appear when configuring a Dialed Number in Configuration manager

    Dear all,
    I am implementing a UCCE system version 9.0
    When I am trying to configure a Dialed Number in Configuration Manager, the Routing Client field is empty, it doesn't show the UCM option.
    Kindly can someone help me on this issue, what should I check? is there something missing in the configuration?...
    Any help would be greatly appreciated.
    Thank you in advance.
    Lara

    ICM Config Manager > Tools > Explorer Tools > PG Explorer
    Do you see a PG and PG Peripheral for UCM? If so, select the Peripheral and go to the Routing Client tab. I've attached a picture of what a healthy functioning PG and PG Peripheral would look like from the Routing Client perspective. 

  • Virtual Center 1.3.1 client doesn't display

    Hello all,
    I've been having a rather perplexing issue on and off over the past 6 months or so.  Randomly, when you load the 1.3.1 client it will not display.  You can see it running in processes, however it will never display the login prompt.  You are not able to end the process (no error, it just won't end).  You are forced to reboot the computer to clear the process.  It will never load again on its own though.
    One method of resolution I noticed that works 25% or so of the time is to uninstall the PCI bus driver, then power off the machine.  Power it back on and let it re-detect everything again.  I have no idea why this would work.  The only thing that I can think of is that it is removing a video profile or some hidden setting for virtual center that I can't otherwise find (I've painstakingly gone through the registry with no luck).
    There are no errors in the windows application or system logs pertaining to this.  I can only imagine that windows thinks the application is opening and closing successfully when its not.
    This only seems to happen on the newer Lenovo desktops we have been receiving.  They come with a standard VGA port and two display ports.  I've had this happen on any combination of the three.  All desktops have two monitors attached and all have at least one 22" Lenovo LCD monitor.
    PC specs:
    Lenovo M93p
    i5 quad core processor with Intel onboard video (4600)
    8GB of ram
    500GB hard drive
    Windows 7 x64 Enterprise
    At this point, I am speculating that specific bios version levels coupled with specific driver versions are causing the issue.
    Anyone have any ideas on what I can do to try to narrow this down?  Or maybe there's a 3rd party client?  I'm at a loss and its extremely frustrating.

    Wow, Adobe customer support is the worst I've ever used. Not these boards, these have helped me a lot in the past, but everything else.
    Support has done nothing but vehemently try to convince me that I don't have a problem. "If CC desktop says 'up-to-date' then it's up-to-date." This has been their mantra. I plead with them, "No, my version of Premiere Pro is at 7.0.0 and the current release is 7.0.1." Then they just read the same line from their script, "If it says 'up-to-date' …"
    One support guy even said to me, after I explained and re-explained my issue many times, "I don't understand, so why is your other computer getting updates and this one is not?" Gee, I don't know, THAT'S WHY I'M CALLING YOU!
    I'm told to try the same basic things I've tried time and time again. I keep getting passed off to other people who quickly give up and tell me there's nothing they can do except pass me off to someone else.
    It's been over a month that I've had this problem, ever since I installed Creative Cloud. I have encountered lots of bugs in the software, there are certain things I cannot do in my apps and I really need to get this resolved.
    Sorry to rant and rave on a forum meant for utility, but this is the worst customer support experience I've ever endured, and I guess i'm trying to illustrate that THIS FORUM IS MY ONLY HOPE.
    Please, any tips, advice, suggestions, any help from you knowledgable forum members is really appreciated. I really like the CC suite in theory, but I can't continue to be a creative cloud member if I am resigned to only using buggy release software for the foreseeable future on my primary computer.
    I am not going to pay $50 a month for something so broken that I am not getting any support on.
    Thanks,
    Evan

  • Running total in group header doesn't display when it's at page bottom

    Post Author: Charles Denight
    CA Forum: Formula
    Hi, Using v.9 of Crystal Reports I've created some running totals using a cross-tab workaround to get the running totals into the group headers, but when the group header falls at the bottom of the page then the running total doesn't show up.Would appreciate knowing why and how to fix this.

    Replacing an item that is malfunctioning because of a manufacturing error is the bare minimum I would expect from customer service for any electronics item.
    The thing Apple does extremely well is their flat fee policy for repairs on their computers.
    I managed to break my MacBook pretty seriously (logic board needed to be replaced) and I'm sure it cost them more to repair the unit than the $328 they charged me.
    I probably would have been angry if it was something minor, but I'm guessing that most repairs to screens/motherboards/etc cost more than their flat fees.

  • Printer Software doesn't display when installing in Win 8

    Hello
    I have a very frustrating issue which means I can not install the printer software for my HP Plus B209a Printer.
    When I try and run the installer for the full package installation it extracts the files as normal to a temp location.
    Then the HP Installer (32bit) runs but in the background and does not display anything on screen. I just uses 15% CPU in task manager but no installation windows?
    To give some background to this issue
    (The first time I ran the installer software it did load but hanged on the detecting printer stage 1. So I restarted the laptop and tried to run again but this happened.)
    I have updated windows to 8.1 and all updates are installed. I have tried disabling all startup programs etc.. to no avail.
    Please could someone help with this issue as I can not scan with the printer until I can get this installed.
    Kind Regards

    Personnel Message sent about Scrubber
    JonW
    I work for HP

  • IPod art doesn't display when phone is off with 4.2.1

    I have a 3G iPhone, running iOS 4.2.1.
    In the previous iOS, when I had the ipod playing something with cover art, and the phone was off, you could click the home button which would show you the track title etc with the cover art as the background image.
    Now, with 4.2.1, I get the info but no artwork, just the wallpaper.
    Is anyone else having this issue with the 3G? (I know it works as it should with iPhone 4.)

    I had this same issue. Restart your iPhone. This should fix it, though if you add more music you'll need to restart again in order to have the album art display on the lock screen.

  • Time doesn't display when I close phone, record album does.

    When I close my Style, I used to get a thirty second image of the time on the external screen.  Now I get a picture of a record album.  I don't have the music player running, and the clock's options don't lend any clues. 
    Thanks in advance for any help.

    Hi kapntoad,
    Does the same occur if you reinsert your battery and try again?
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

Maybe you are looking for