Quality Management Material

Hi Friends,
I Request you to please provide me links for websites how to get Material for Quality Management.
Thanks & Regards,
Ashok Kumar G

Dear activate relevant inspection type based on your business requirement in particular material master QM view and in SPRO in plant level settings in inspection lot creation tab in field for "InspTypeForInspStock" make sure you've maintained same inspection type too.
Check below links for more information.
Inspection Lot Creation:
http://help.sap.com/printdocu/core/print46c/en/data/pdf/QMIMIL/QMIMIL.pdf
Key Quality Management Configuration for Integration:
http://wiki.sdn.sap.com/wiki/display/PLM/KeyQualityManagementConfigurationfor+Integration
Quality Management:
http://www.sap-topjobs.com/SpecialPP/QmSample.pdf
Cheers
KK

Similar Messages

  • Create Quality Management view for a Material in background mode

    I want to know if there is a way to create a Quality Management View (Quality Management tab) on Material Master (material already extended to plant ) in background mode.
    The requirement is to add inspection setup data for a material extended to a particular plant in background. I tried using 'BAPI_MATINSPCTRL_SAVEREPLICA' to add the data and it works perfect as required. Now the problem is this BAPI is creating the inspection setup data only for the material which has QM tab in MM02 for e.g. I manually created the inspection setup for a Material from MM01 and then deleted it , now the BAPI works fine for this material because when I created an inspection setup from MM01 it created the QM tab and after i deleted the entry the tab was still there with no entry in inspection setup.
    I want to create inspection setup for a material which does not have QM tab.
    I have to create everything is background mode. BDC is one option which I am list interested in.
    Thank you for helping in advance.

    Thank you for looking into my issue. I have to do the inspection setup in background without using any front end transaction.

  • Inspection setup in view quality management update in material master

    Hi all,
    We are using BAPI_MATERIAL_SAVEDATA for our material master updation.
    Here one  of the change in the program is to update the inspection setup in the view quality management.
    Can anybody tell in which stucture of the bapi BAPI_MATERIAL_SAVEDATA  i can pass the values of the inspection set up fields.If not is there any other bapi through which can be done?
    Thanks in advance.
    regards
    Nazmul

    Hi,
    To deactivate the Inspection Types for materials, you can use transaction QA08.
    Here use tab "Deactivate insp. type" and specify the inspection type which you want to dactivate.

  • MATMAS05 IDOC adding Quality Management view to Material when posted

    Matmas05 IDoc when posted is appending Quality Management(QM) view to material.
    Initially Material doesnt have a QM view . However whil e postion matmas05 , MAra-VPSTA & PSTAT fields are getting updated with the letter Q(which is QM). I'm not passing any fields relevant to quality management. I donot want any views to be added.
    Thanks
    Sunil R

    I can see the IDOC data passing in through WE02 and can control which data I can pass in to MATMAS05 IDOC. However need to know why the idoc is appending a view to the material. I tried to Debug the IDOC_Input_MAtmas01 Function module which is used to process this incoming IDOC to SAP, coudnt get too far on that.
    Where can i see the actual updating of tables like mara &marc in the above Function module at debug time?
    Thnaks
    SUnil R

  • Can we mandatory Quality Management Field at time of Material Creation

    Hi Gurus,
    I need to Control Material Creation for every item, if we create materials in some case our user forget for tick the Quality Management .
    Is it any T-code or any customisation for control the same.
    thanks in advance.
    Ajit

    Hi Ajit,
    In MM01..After entering industry sector and material type,,,when you click on enter...A window for Views will popup...
    Now You select your all views including your quality view...Now you check the check box for "view selection only on request"...Now you click on default values....
    Now when ever user will create material automatically Quality view will be selected.....and it wont show the views popup again..
    Cheers!!!
    Utsav

  • Book(material) number/name  for Quality Management

    Hi experts,
       Can u tell me what is the exact material number for quality management configuration for SAP R/3 as well as for all the material related to quality management provided by SAP.(like for abap objects - BC404)
    Expecting your reply.
    Regards,
    Arun.

    Hi prashant,
        I do have those materials, but it didn't helped me in studying QM.
    For webdynpro, sap as given a material named NET310, likewise for every study material they have given some material number.
    Likewise what is the material number for QM configuration?
    Hope u can help me in this regard.
    Waiting for your reply.
    Regards,
    Arun.

  • Book(material) Number/name for Quality Managment

    Hi experts,
    Can u tell me what is the exact material number for quality management configuration for SAP R/3 as well as for all the material related to quality management provided by SAP.(like for abap objects - BC404)
    Expecting your reply.
    Regards,
    Arun.

    solved

  • Quality Management During Goods Receipt (Inspection Lot)

    Hi all,
    >>>>>>>>>>>>
    REQUIREMENT
    <<<<<<<<<<<<
    I have a requirement that i need to write an interface program which will receive a file from external agency (manufacturer) and process goods receipt until inspection results. The following steps need to be taken care of;
    1) Create a equipment (Utilities - It is an unique identifier for each unit of the material).
    2) Do Goods Receipt for the PO with the equipment numbers created.
    3) Create Inspection Lot for the material document created during the GR for each equipment number.
    4) Execute Inspection Result.
    >>>>>>>>>>>>
    INFO NOW
    <<<<<<<<<<<<
    Inspection lot can be created from MIGO directly by SPRO config and MM master data maintenance.
    >>>>>>>>>>>>
    DONE
    <<<<<<<<<<<<
    Called BAPI to create Equipment.
    Called BAPI to create Goods Receipt.
    Inspection Lot Settings to create lots during MIGO
    1) New Inspection Type Created as SG1 at SPRO->QM->Quality Inspection->Inspection Lot Creation->Maintain Inspection types. The maintenance is a copy of type 01.
    2) Assign Inspection Type to Lot Origin at SPRO->QM->Quality Inspection->Inspection Lot Creation->Maintain Inspection Lot Origins and Assign Inspection Types. SG1 is maintained against lot origin 01 with variant 01.
    3) Set Default values for SG1 at SPRO->QM->Quality Inspection->Inspection Lot Creation->Define Default Values for Inspection Type with parameters same as for 01.
    4) In Material master for the record set the inspection setup in the quality management tab. put SG1 as active and preferred. Also set Post to insp Stock, Insp with task list, Auto Assign, Skips allowed, Serial Numbers poss, Control Insp lot as For each Material Doc Item.
    I have to kow how to select the Inspection Plan for the lot and thus set the status of lot to released and get it ready for results.
    I also have BAPI ready for Inspection Result.
    >>>>>>>>>>>>
    TESTING
    <<<<<<<<<<<<
    I have tested it and was working fine till last thursday. I have the above mentioned settings even now in the system. Can there be anything else which the functional consultants would have change that affected the process. Anyways now the inspection lot is not getting created for the Inspection during MIGO and I am really struggling to find the exact reason.
    For your info, I am working mostly on Utilities and so do not have much idea about the quality management stuff.
    >>>>>>>>>>>>
    QUESTION
    <<<<<<<<<<<<
    Why the inspection lot is not getting created during MIGO for my scenarion?
    How to select the inspection plan in the program?

    deleted

  • Control Key for Quality Management in Procurement

    if we activate Control Key for Quality Management in Procurement in material master then wether we need  also store a control key at the plant level for quality management in procurement.
    if we want want to maintaine
    pls tell me how it is
    pls expalin
    faisal

    if we activate Control Key for Quality Management in Procurement in material master then wether we need also store a control key at the plant level for quality management in procurement.
    I am not clear about your question. But I guess you want to know about control key function. You activate "proc. asctive" box in QM view of material master, that is always at plant level. When you activate this, system automatically asks for a control key & cert type, thats mandatory field.

  • Warehouse Management (WM) Quality Management Interface

    When receiving materials into quality management from a purchase order the system automatically puts the material into the interim bin 902.   Is it possible to configure the system to automatically create the transfer order (and select the putaway bin) from the Quality management usage decision - moving the material from 902 to the put away bin?  The materials management movement type is 321.

    whenever you recieve material from external supplier, then it goes to 902, this has nothing to do with the stock status.
    At the same time you usually get a transfer request to move the material to the bins.
    When your quality inspection is done, then this will create a so-called posting change notice with a positive quant in urestricted status and a negative quant with Q status, both in storage type 922.
    It does not really matter if your q-status quantity is still in 902 or already in the final bins, when you process the posting change notice in LU04, except you are moving the postive quant manually from the 902 zone and issue already material.
    Both, the automatic creation of TOs for the transfer from 902 to the bin as well as the processing of the PCN can be automated.
    Background jobs are  RLAUTA10 and  RLAUTA11

  • BDC for MM02 - Quality management

    Hi Friends,
    I need to create BDC program for MM02 with Quality Management View.
    My problem is with the sequence of the QM view in MM02 for different material types as per with recording.
    Kindly suggest me to resolve the issue.
    Thanks & Regards,
    S.Suresh
    Edited by: The Rock on Nov 7, 2011 1:43 PM

    Hi S.Suresh,
    I would simply read table QMAT to check if material/plant has Inspection Type '01'.
    Then, in case Inspection Type needs to be created, just call the BAPI_MATINSPCTRL_SAVEREPLICA FM with structure INSPECTIONCTRL properly filled-in.
    If successful, then remember to call BAPI_TRANSACTION_COMMIT.
    Hope this could help.
    Bye,
    Flavio

  • Quality Management - Usage Decision error

    Hi all,
    My scenerio is - There is a material ABC which is procured from the supplier. The Quality of the material is 'below standards'. However, material ABC, in Tcode QA11 Usage decision was done as ACC1 (accepted). Since the material ABC is not meeting quality standards, Usage decision is changed to RET1 (Bad Raw Material - Return) using Tcode QA12.
    Now the problem is that when I enter QA11, the system does not allow me to enter as a message appears 'Detailed Info- Usage decision made is disallowed' is showing.
    Please provide me a solution as the material is lying in the unrestricted stock and it has to be returned to the supplier. Also please consider costing implications.
    Thanks in advance

    Cancel the inspection lot in QM using the function to change the usage decision.
    Logistics - Quality management - Quality inspection - Inspection lot - Usage decision - Change with History - Usage decisions - Functions - Cancel lot 
    Reward if cleared and close the thread.

  • Quality Management Scoring

    Hi All,
    Can anybody explain me how the system calculates Quality score (which gets reflected in Vendor Evaluation)?.....any formula or principles etc
    Is there any configuration setting the QM side which helps in controlling that score?
    Requirment - It is intended that one critical defect should not be easily overcome by success on other less critical tests. Currently, it has been set in QM as such the quality score is getting 80 irrespective of pass or fail of many tests
    Thanks

    Hello,
    The score *Goods Receipt (main criterion quality)* is calculated as follows:
    1.     If a material is subject to incoming inspection, part of the delivered material is checked by the quality assurance department when goods are received against a purchase order.
    2.     An inspection lot is created. After the inspection or testing, the person responsible in Quality Management then enters a result and makes a decision as to whether the material can be used.
    3.     All the incoming inspection lots are stored in a file with their scores.
    4.     When you run an automatic re-evaluation for a vendor, the system selects all the incoming inspection lots for the vendor that lie within the validity period and calculates the average of the scores.
    The result is the vendor's score for the quality of goods received.
    The *Quality Audit (Main Criterion "Quality")* score is calculated as follows:
    A quality audit has taken place in one of your vendor's plants. This means that either your own company has carried out a check to determine how the vendor ensures that his products are of a high quality, or the vendor has carried out the audit himself.
    1.     An audit lot is created by Quality Management. When the audit has been completed, the person responsible determines a score for this audit lot.
    2.     All the audit lots are stored in a file with their scores.
    3.     When you run an automatic re-evaluation of a vendor, the system selects all the audit lots for the vendor within the validity period.
    4.     The parameter Quality audit is read from Customizing.
    5.     If the indicator is set, the system calculates the average score for all the quality audits in the validity period. The result is the vendor's score for the quality audit.
    If the indicator is not set, only the most recent audit lot is included. This then represents the vendor's score for the subcriterion.
    The Evaln. QM system field on the screen for the main criterion "Quality" shows you the score that was awarded to the Quality Management system (e.g. ISO 9003 with certificate) used by the vendor. It is only displayed if the Prev. QM system field is filled in the vendor master record. The score is awarded by the QM system and is for information purposes only. Display the vendor master record to see which quality system the vendor uses. You can use the content of the field for your own program and have this score included in the vendoru2019s quality score.
    Complaints/Rejection Level (Main Criterion "Quality")
    The score for the subcriterion Complaints/Rejection Level is computed by the SAP component QM Quality Management and passed on to the MM Vendor Evaluation component.
    If the scale for the key quality data in the QM system does correspond to the scoring range in Vendor Evaluation, the Vendor Evaluation system converts the QM data for use in the Vendor Evaluation scoring system.
    The score is calculated as follows:
    9.     On the shop-floor, material A supplied by vendor ACME is being processed in the course of production.
    10.     If the material is OK (that is to say, no quality notifications have been entered for material A during the entire validity period), the vendor is awarded the highest score for the material (100 points).
    11.     If the material is found to be defective, a quality notification (such as a rejection note or nonconformance complaint sent to the vendor) is entered.
    12.     During the vendor evaluation process, the system checks whether the costs associated with the faulty delivery exceed the maximum percentage of business volume defined in the Customizing system.
    In the above example, your business volume with (value of purchases from) ACME amounts to one million dollars annually. The costs associated with defective deliveries may not exceed 0.1 percent of business volume, i.e. $100,000. The costs associated with a quality notification are estimated at $500.
    13.     If the costs that your company incurs as a result of the faulty materials are lower than the defined proportion of business volume, the system calculates a score between 1 and 99 points.
    To do this, the system multiplies your annual business volume with the vendor ($1,000,000) by the parameter Business volume share (0.1).
    The number of accumulated quality notifications (10 in all) multiplied by the cost of each notification ($ 500) is subtracted from this.
    The result is divided by the annual business volume multiplied by the proportion of business volume.
    The result of this is a factor which, multiplied by a hundred, gives a percentage.
    This percentage indicates the quality provided by the vendor in relation to the particular material. The value 95% in the above example means that complaints or rejections involving the vendor ACME only resulted in 5% of the maximum costs allowed, i.e. the quality is very good.
    Note on Scoring Range and Conversion QM - MM:
    Since the minimum points score that can be obtained is not 0 (0 means "not evaluated") but 1, only 99 points are available in the range 1 to 100.
    This is why the system works out how many points out of 99 the value 95% corresponds to.
    The result is 94 points.
    Since the bottom of the scoring range has been moved up by one point (1 point is the worst score not 0), the system adds on 1 point.
    ACME therefore achieves a score of 95 points for the subcriterion Complaints/Rejection Level for material A.
    14.     If the cost of defective or non-conforming deliveries exceeds the share of business volume defined in Customizing (in this case $100,000), the vendor is awarded the lowest score (1 point).
    The score for the subcriterion Complaints/Rejection Level is computed by the SAP component QM Quality Management and passed on to the MM Vendor Evaluation component.
    You can find this information in help.sap.com
    I hope it helps!
    Best Regards,
    Arminda Jack

  • Regarding quality management

    anybody knows what are the t codes ad other businees process whiledealing with Quality Management in case on integration with Material Management

    hi,
    1) Maintain Material with Classification and Quality Management view
    2) Tick the Check box Quality key Active in QM View->QM view->Inspection Set up and activate the inspection type for which the inspection lot.(e.g insp. type 01 - GR against PO)
    3) Create Quality Info Record(QI01)
    4) In PO the stock automatically goes to Quality stock.
    5) Check MMBE stock
    6) Do Result Recording and Usage Decision(QA32)
    7) Check stock (MMBE).
    There are few steps where the PP/QM Consultant need to help you in QI01,QA32 and in Creating characteristics and class according to Requirement(purity...etc).
    Regards
    Priyanka.P

  • Quality Management View in MM01

    Hi all,
    While extending material from one plant to another , how to capture Quality Management View .
    Ravi

    Hi Ravi,
    Check this link, this might help you.
    Re: Quality Management
    http://www.sap-img.com/sap-qm.htm
    Regards,
    Chandra Sekhar

Maybe you are looking for