MATMAS05 IDOC adding Quality Management view to Material when posted

Matmas05 IDoc when posted is appending Quality Management(QM) view to material.
Initially Material doesnt have a QM view . However whil e postion matmas05 , MAra-VPSTA & PSTAT fields are getting updated with the letter Q(which is QM). I'm not passing any fields relevant to quality management. I donot want any views to be added.
Thanks
Sunil R

I can see the IDOC data passing in through WE02 and can control which data I can pass in to MATMAS05 IDOC. However need to know why the idoc is appending a view to the material. I tried to Debug the IDOC_Input_MAtmas01 Function module which is used to process this incoming IDOC to SAP, coudnt get too far on that.
Where can i see the actual updating of tables like mara &marc in the above Function module at debug time?
Thnaks
SUnil R

Similar Messages

  • Create Quality Management view for a Material in background mode

    I want to know if there is a way to create a Quality Management View (Quality Management tab) on Material Master (material already extended to plant ) in background mode.
    The requirement is to add inspection setup data for a material extended to a particular plant in background. I tried using 'BAPI_MATINSPCTRL_SAVEREPLICA' to add the data and it works perfect as required. Now the problem is this BAPI is creating the inspection setup data only for the material which has QM tab in MM02 for e.g. I manually created the inspection setup for a Material from MM01 and then deleted it , now the BAPI works fine for this material because when I created an inspection setup from MM01 it created the QM tab and after i deleted the entry the tab was still there with no entry in inspection setup.
    I want to create inspection setup for a material which does not have QM tab.
    I have to create everything is background mode. BDC is one option which I am list interested in.
    Thank you for helping in advance.

    Thank you for looking into my issue. I have to do the inspection setup in background without using any front end transaction.

  • Quality Management View in MM01

    Hi all,
    While extending material from one plant to another , how to capture Quality Management View .
    Ravi

    Hi Ravi,
    Check this link, this might help you.
    Re: Quality Management
    http://www.sap-img.com/sap-qm.htm
    Regards,
    Chandra Sekhar

  • Inspection setup in view quality management update in material master

    Hi all,
    We are using BAPI_MATERIAL_SAVEDATA for our material master updation.
    Here one  of the change in the program is to update the inspection setup in the view quality management.
    Can anybody tell in which stucture of the bapi BAPI_MATERIAL_SAVEDATA  i can pass the values of the inspection set up fields.If not is there any other bapi through which can be done?
    Thanks in advance.
    regards
    Nazmul

    Hi,
    To deactivate the Inspection Types for materials, you can use transaction QA08.
    Here use tab "Deactivate insp. type" and specify the inspection type which you want to dactivate.

  • BDC for MM02 - Quality management

    Hi Friends,
    I need to create BDC program for MM02 with Quality Management View.
    My problem is with the sequence of the QM view in MM02 for different material types as per with recording.
    Kindly suggest me to resolve the issue.
    Thanks & Regards,
    S.Suresh
    Edited by: The Rock on Nov 7, 2011 1:43 PM

    Hi S.Suresh,
    I would simply read table QMAT to check if material/plant has Inspection Type '01'.
    Then, in case Inspection Type needs to be created, just call the BAPI_MATINSPCTRL_SAVEREPLICA FM with structure INSPECTIONCTRL properly filled-in.
    If successful, then remember to call BAPI_TRANSACTION_COMMIT.
    Hope this could help.
    Bye,
    Flavio

  • Regarding quality management

    anybody knows what are the t codes ad other businees process whiledealing with Quality Management in case on integration with Material Management

    hi,
    1) Maintain Material with Classification and Quality Management view
    2) Tick the Check box Quality key Active in QM View->QM view->Inspection Set up and activate the inspection type for which the inspection lot.(e.g insp. type 01 - GR against PO)
    3) Create Quality Info Record(QI01)
    4) In PO the stock automatically goes to Quality stock.
    5) Check MMBE stock
    6) Do Result Recording and Usage Decision(QA32)
    7) Check stock (MMBE).
    There are few steps where the PP/QM Consultant need to help you in QI01,QA32 and in Creating characteristics and class according to Requirement(purity...etc).
    Regards
    Priyanka.P

  • QM View in material master

    Hi Experts,
         I need to maintain the quality management view for the newly created materials and also have to assign the characteristics to all the materials, is there any way to do it at mass without using bdc or lsmw, if any method is there pls tell me in detail, thanks
    Thanks & Regards,
    Karad D D

    Dear Devidas
    Kindly use MM17 for the mass maintainance of the QM view. Activate GR processing time as an input in MM17 which will automaticaly update the entire QM view
    some times MM50 doesnt work.
    Regards
    Gajesh

  • Active view  in materia for Quality management

    Hello.
    We are going to deploy QM in my company. I need bapy or transaction to active quality view from material.
    Does it exist? I have to upload about 1000 material
    Regards.
    Antonio

    I have undestOOd, that i work with MM17 to active view qm with any fields from this view. After with qa08 i can insert inspection type.
    Is it ok?
    Correct
    Can i do these two steps and one step?
    No first MM17 & then QA08
    Only care is to be taken you should know which fields you want to populate or active QM view through QA17

  • Can we mandatory Quality Management Field at time of Material Creation

    Hi Gurus,
    I need to Control Material Creation for every item, if we create materials in some case our user forget for tick the Quality Management .
    Is it any T-code or any customisation for control the same.
    thanks in advance.
    Ajit

    Hi Ajit,
    In MM01..After entering industry sector and material type,,,when you click on enter...A window for Views will popup...
    Now You select your all views including your quality view...Now you check the check box for "view selection only on request"...Now you click on default values....
    Now when ever user will create material automatically Quality view will be selected.....and it wont show the views popup again..
    Cheers!!!
    Utsav

  • Quality Management Material

    Hi Friends,
    I Request you to please provide me links for websites how to get Material for Quality Management.
    Thanks & Regards,
    Ashok Kumar G

    Dear activate relevant inspection type based on your business requirement in particular material master QM view and in SPRO in plant level settings in inspection lot creation tab in field for "InspTypeForInspStock" make sure you've maintained same inspection type too.
    Check below links for more information.
    Inspection Lot Creation:
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/QMIMIL/QMIMIL.pdf
    Key Quality Management Configuration for Integration:
    http://wiki.sdn.sap.com/wiki/display/PLM/KeyQualityManagementConfigurationfor+Integration
    Quality Management:
    http://www.sap-topjobs.com/SpecialPP/QmSample.pdf
    Cheers
    KK

  • Adding fields in costing view of material master

    Hi gurus,
    I need to add 4 fields in costing view of material master. I have followed the steps in SPRO, for configuring customized screen in material master.
    1) Created a function group YMMCO and copied the screen 2904 from program SAPLMGD1.
    2) Added 4 fields in my customized screen.
    3) Created copy of 01 ( Screen reference ) to z1 in OMT3B.
    Since 2904 is not there in the sequence . I changed one 0001 sequence at the end to 2904 . I also assigned my program
    SAPLYMMCO to it. I can see the changed fields in data screen and subscreen.
    4) Then I assigned the SSq to z1 in transaction OMT3E.
    But unfortunately, when I go to MM01 to create a material , I am not able to view the fields I added in costing view.
    I have checked the screen for the previous field, it shows 2904 only.
    Two days back, I did the same thing in basic data view 1 , it was working properly. As per client's suggestion I put it in
    costing view, it is not working . Please give me suitable suggestions.
    Thanks in advance.
    D. Mallick

    Hi,
    I also need to add custom fields to Basic data view. After copying & changing the screen sequence in Config, I could able to see the custom fields in Basic Data view.
    I have appended structure with custom fields to MARA table.
    But the values I enter in the screen is not getting updated to the table MARA.
    Can you please let me know the code, I should have have in PAI (Process After Input) module in the Sub Screen to update the values?
    Thanks,
    Dasa

  • Create Material using MATMAS05 IDOC

    Hi Gurus,
    Please tell me what are the mandatory fields and tables for those fields to create a Material using MATMAS05 standard IDOC.

    Hi,
    Fields are  never mandatory while sending the idocs. Its the segment which is mandatory.
    If you see the definition of MATMAS05 idoc in transaction WE30 you will find E1MARAM  and E1MAKTM,  as a mandatory segment. It means that you can't send an Idoc without this segment. If you go in segment details than even if you populate a single field in the segment E1MARAM and E1MAKTM then you can send the idocs.
    KR Jaideep,

  • Reg : Material warehouse management view 1 & 2

    Hello All,
    Using a Z-programI am extending the warehouse managemnt view for a single Plant, the view gets created successfully. But some how an Inactive version of Warehouse management view gets created for other plant also. How we can prevent the creation of this inactive view creation.
    Please let me know your suggestion.
    Regards,
    Ravi Kasale.

    from Note 545626 - FAQ: Data transfer problems:
    Read the explanations in OSS Note 67616.
    Bear in mind that, in the structure/table HEADDATA, the for BAPI methods StandardMaterial.SaveData (BAPI_MATERIAL_SAVEDATA) and StandardMaterial.SaveReplica (BAPI_MATERIAL_SAVEREPLICA) of the business object BUS1001006, you can select the required views and these correspond to the respective maintenance status.
    In the segment E1MARAM of the MATMAS IDocs, you can assign the overall maintenance status in the field VPSTA.
    Edited by: Jürgen L. on Jun 6, 2011 4:01 PM

  • UCCX Advanced Quality Management with VMware View

    Hi,
    I have a customer who uses UCCX 8.5 with VMware View clients running CAD and 7940 IP phones.
    They are looking at recording options and have expressed an interest in the Advanced Quality Management product.
    There are a few issues that I would need to consider specific to their environment.
    The first is that Desktop based recording would not work in this environment as CAD is running on a virtual desktop rather than a PC daisy chained to the IP phone. The second is that network based recording is not supported as the 7940 phones do not have a Built in Bridge.
    This leaves server based recording which uses SPAN port mirroring. The issue with this is that the agents phones are distributed across multiple Catalyst switches so I guess I would need to configure RSPAN - has anyone got any experience of using Cisco QM with RSPAN? - if yes how well did it work? - the customer would probably be willing to upgrade the IP phones used by the agents if that would be a better option.
    The final query relates to the Screen Recording Client - the install guide details how to install this on a Citrix server but makes n mention of VMware view. Does anyone know if support for this is on the roadmap?
    Thanks!

    Hi James
    I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
    The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
    If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN  you should be OK.
    This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
    I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM  - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
    Can't help re: VMware view either I'm afraid... 
    Aaron

  • Material Managent view

    Hi,
    Regarding to the first question on material management view  I would like to clarify further that while creating a material using Material master I could able to see only MRP 1 and MRP 2  view but not the MRP 3 & MRP 4 view .How can i see all four MRP views while creating,modifying as well as viewing the material master ?
    Thanks & regards
    Rabi

    Hi Rabikumar,
    You need to maintain following setting in OMT3E
    SRef: trans    *
    SRef: user     *
    SRef: matl type    *
    SRef industry       *
    SSeq                 21
    Screen Sequence description     Std ind.(short) tab pages
    Hope this solve your problem.
    Regards,
    Raja.
    Edited by: Raja on May 20, 2009 1:01 PM

Maybe you are looking for