Queries for ZoS Hardware commands
I am looking to know about the OS version, fix pack, hardware details (memory etc), ipaddress, hostname and which DB2 version /patch is installed on my System Z server. However, I am not well versed with the z/OS shell / interface.
Please suggest me some TSO/E commands that can help me know the above details and which prompt to run those commands on ?
Secondly, please guide me on the types of interfaces available... We generally use
> tso at the first screen,
> then enter user and password,
> in (CUstom Master Application Menu screen) tso omvs
Thanks,
Hi,
You can refer below mentioned links for required help
Z/Os MVS commands : http://www.mabu.org/ZOSCommands.pdf
Z/Os TSO/E commands : http://grothoff.org/christian/teaching/2009/3400/ikj4c580.pdf
DB2 for z/OS technical information and manuals : http://www-01.ibm.com/support/docview.wss?rs=64&uid=swg27011659#manuals
Hope this helps.
Regards,
Deepak Kori
Similar Messages
-
When deploying Endpoint Protection with SCCM 2012, some workstations are getting a popup saying:
The software you are installing for this hardware has not passed Windows Logo
testing and it references "Antivirus". Upon clicking continue anyway it finished installing.
I'm not able to duplicate it on command and not sure why it's happening. Anyone else see this or have ideas on how to troubleshoot?Without a real screenshot (and maybe even being there), it's hard to say. IME this is not normal behavior and my first thought is that this is actually some malware causing this.
Jason | http://blog.configmgrftw.com
Sorry it took a while, was waiting for it to happen again. Here is an actual screen shot. I'm leaving it until I hear back from you guys. This client actually shows that the endpoint protection deployment state failed with this message:
Description: 0x8004FF03.
InstallUpgradeOrUpdateInProgress=4.1.509.0 -
FMS not responding for RTMP publish command
Hi,
Please answer to the followong questions
1. I am developing an RTMP encoder application. The application is establishing a connection and creating a new stream. But when publish command is sent to the server, the server should respond with "on status" message. The server is not giving any response, but when publish command is sent in 'record' mode, a new directory is getting created the application folder of the server. So, the problem is the server is receiving the publish command but not giving any response. Please the possible reasons for FMS's behaviour. Can encoder start sending audio / video data without receivng the response for the publish command from the server? Please let us know.
2. Also, which of the follwing publishing name is correct. Should videoKeyframeFrequency and totalDatarate be part of publishing name.
publishing_name = mylivestream
publishing_name = mylivestream?videoKeyframeFrequency=5&totalDatarate=248
3. Is calling RTCs 'releaseStream' and 'FCPublish' must before sending 'publish' command?
Thanks and Regards,
VishwanathHi,
Thanks for your interest on FMS.
1. How are you catching the events back from the server ? Server always sends the response codes and you must be catching them through event listeners on the client side (asynchronous). There is no way the server cannot send back the responses and still do the job of creating folders etc.
2. Yes, sending the metadata info and other required info as query parameters along with the streams is one of the very good ways to deliver.
3. These methods are not mandatory to be used. They are optional and the sample application live that comes with the FMS has the implementation for these and hence, it just expects the encoder/clients to call them on it. Nice to have though.
Why don't you post these queries in the FMS forums instead of HTTP Streaming (here)? My only concern is, you will get more quick and better expert answers as many FMS guys are watching them. HDS guys are watching this thread. -
Applescript for running sudo commands in terminal
I'm a newbie when it comes to Applescript and was wondering if someone could help with a basic request. I need to write a small script to do the following:
1. Launch terminal
2. Run the 'Sudo -s' command
3. Enter the administrator password (in plain text)
and then
4. run some sudo commands like "sudo defaults write /Library/Preferences/com.apple.loginwindow HiddenUsersList -array-add administrator"
I actually WANT the administrator password to be in the script in plain text even though I understand the security risks (I will literally be the only person to ever see the script). I've trawled forums all over but can't seem to find what I am looking for and cannot get it working by patching together the various commands I have found. Thanks in advance for any help you can give!
SeanI've included two examples. The preferred way & the hacker way.
with administrator
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
Author: rccharles
For testing, run in the Script Editor.
1) Click on the Event Log tab to see the output from the log statement
2) Click on Run
For running shell commands see:
http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
-- Write a message into the event log.
log " --- Starting on " & ((current date) as string) & " --- "
-- debug lines
set unixDesktopPath to POSIX path of "/System/Library/User Template/"
log "unixDesktopPath = " & unixDesktopPath
set quotedUnixDesktopPath to quoted form of unixDesktopPath
log "quoted form is " & quotedUnixDesktopPath
try
set fromUnix to do shell script "sudo ls -l " & quotedUnixDesktopPath with administrator privileges
display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
on error errMsg
log "ls -l error..." & errMsg
end try
end run
This version has an inline password.
Notice the echo 'password' |
The single quotes are no accident.
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
Author: rccharles
For testing, run in the Script Editor.
1) Click on the Event Log tab to see the output from the log statement
2) Click on Run
For running shell commands see:
http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
-- Write a message into the event log.
log " --- Starting on " & ((current date) as string) & " --- "
-- debug lines
set unixDesktopPath to POSIX path of "/System/Library/User Template/"
log "unixDesktopPath = " & unixDesktopPath
set quotedUnixDesktopPath to quoted form of unixDesktopPath
log "quoted form is " & quotedUnixDesktopPath
try
set fromUnix to do shell script "echo 'password' | sudo ls -l " & quotedUnixDesktopPath
display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
on error errMsg
log "ls -l error..." & errMsg
end try
end run -
I'm not even sure if this is an extension or plug-in and all I can tell you is what I have already stated. I can only make one command at a time and after each one I get a pop-up from Java script that says uninstal set. I must depress ok to move on, but only for one more command and it starts over again. This also happened when I tried to instal firefox 4 a couple months ago and I deleted the program and went back to an earlier version.
Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline -
Queries for current Qtr and prior quarter
If I select one date in dashboard prompt in one column I want to display current quarter revenue and prior Qtr revenue.
Could anyone give me the queries for the current Qtr and prior Qtr?
So I will going to use presentation variable from the dashboard promptsobiee-date-expressions-reference
Date Calculation OBIEE Expression Explanation :
First Day of the Previous Year
TIMESTAMPADD( SQL_TSI_YEAR , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD removes a year from the returned date for the First Day of the Previous Year.
First Day of the Current Year
TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE) This calculation returns the first day of the year by deducting one less than the total number of days in the year.
First Day of the Next Year
TIMESTAMPADD( SQL_TSI_YEAR , 1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD adds a year to the date returned which will give the first day of the next year.
First Day of the Previous Month
TIMESTAMPADD(SQL_TSI_MONTH, -1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the Current Month. The second TIMESTAMPADD then subtracts one month from the first day of the Current Month arriving to the First Day of the previous month.
First Day of the Current Month
TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE) This expression gets the current day of the month and subtracts one less than the current day to arrive at the first day of the month.
First Day of the Next Month
TIMESTAMPADD(SQL_TSI_MONTH, 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the Current Month. The second TIMESTAMPADD then adds one month from the first day of the Current Month arriving to the First Day of the next month.
First Day of Current Quarter
TIMESTAMPADD( SQL_TSI_DAY , DAY_OF_QUARTER( CURRENT_DATE) * -(1) + 1, CURRENT_DATE) This was included to show the calculations discussed above can be used with other functions. This is the same expression as the one that returns the first day of the current month except this one uses the DAY_OF_QUARTER property to return the first day of the current quarter.
Last Day of the Previous Month
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the Current Month. The second TIMESTAMPADD subtracts a month to arrive at the first day of the previous month.
Last Day of Current Month
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) From right to left the first TIMESTAMPADD finds the first day of the current Month. The second TIMESTAMPADD adds one month to the date to arrive at the first day of the next month. The final TIMESTAMPADD subtracts one day from the returned date to arrive at the last day of the Current Month.
Last Day of the Next Month
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 2, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) From right to left the first TIMESTAMPADD finds the first day of the current Month. The second TIMESTAMPADD adds two months to the date to arrive at the first day of month after next. The final TIMESTAMPADD subtracts one day from the returned date to arrive at the last day of the Next Month.
Last Day of Previous Year
TIMESTAMPADD( SQL_TSI_DAY , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1,
CURRENT_DATE)) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD subtracts one day to arrive at December 31st of the previous year.
Last Day of Current Year
TIMESTAMPADD(SQL_TSI_YEAR, 1, TIMESTAMPADD( SQL_TSI_DAY , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD deducts one day to arrive at December 31 of the previous year. The third TIMESTAMPADD adds a single year to the date to arrive at December 31 of the Current Year.
Last Day of the Next Year
TIMESTAMPADD(SQL_TSI_YEAR, 2, TIMESTAMPADD( SQL_TSI_DAY , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) From right to left the first TIMESTAMPADD returns the first day of the current year. The second TIMESTAMPADD deducts one day to arrive at December 31 of the previous year. The third TIMESTAMPADD adds 2 years to the date to arrive at December 31 of the Next Year.
Last Day of Current Quarter
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_QUARTER , 1, TIMESTAMPADD( SQL_TSI_DAY , DAY_OF_QUARTER( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))) Demonstrated using Quarters. From right to left the first TIMESTAMPADD returns the first day of the Current Quarter. The second TIMESTAMPADD returns the first day of the next quarter. The final TIMESTAMPADD subtracts a single day from the date to arrive at the last day of the Current Quarter.
Number of days between First Day of Year and Last Day of Current Month TIMESTAMPDIFF(SQL_TSI_DAY, CAST('2010/01/01 00:00:00' AS DATE), TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)))) For simplicity I hard coded the January 1, 2010 date and CAST it to a date. I could have used the First Day of the Current Year calculation but didn’t want to over clutter the example. The second part of the TIMESTAMPDIFF uses Last Day of the Current Month calculation to force the TIMESTAMPDIFF to calculate the number of days between the first day of the year and the last day of the current month.
=============
FYI, let say some example,
Last day of previous Quarter:
"GPC_DataMart"."GPC_DataMart"."dbo"."LQ_Position"."Business_Date"=TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAY_OF_QUARTER( "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date") * -(1) + 1, "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date"))
Last month last day:
"GPC_DataMart"."GPC_DataMart"."dbo"."LM_Position"."Business_Date"=
TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date") * -(1) + 1, "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date"))
Last year Last day
"GPC_DataMart"."GPC_DataMart"."dbo"."LY_Position"."Business_Date"=
TIMESTAMPADD( SQL_TSI_DAY , -1, TIMESTAMPADD( SQL_TSI_DAY , EXTRACT( DAY_OF_YEAR FROM "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date") * -(1) + 1, "GPC_DataMart"."GPC_DataMart"."dbo"."MT_BUSINESS_DATE"."Business_Date"))
Thanks and Regards,
Deva
http://obieeelegant.blogspot.com/2011/06/obiee-date-expressions-reference.html -
How to locate 'look for apple tv' command in iTunes
i am trying to connect first generation apple tv to mac mini.
following all instructions but apple tv does not appear in itunes devices list.
cannot find how to configure itunes for 'look for apple tv' command.That depends on how you set it all up. If you chose the "connect to iTunes" option then you should be able to sync content to the hard drive on the Apple TV. If you chose the "add shared library" option then you can only stream to the Apple TV.
-
Hi Friends,
I Have a view named - item_sales with 4 column
Item code
Item name
Transaction_YYYYMM (Date stored in YYYYMM format )
QTY_RECEIVED
QTY_SOLD
Sample data is
ITEM_CODE ITEM NAME TRANSACTION_YYYMM QTY_RECD QTY_SOLD
AX TSHIRT 201307 3000 2000
AX TSHIRT 201308 2000 500
AX TSHIRT 201309 1000 3000
CX XLSHIRT 201307 3000 2000
CX XLSHIRT 201308 3000 2500
CX XLSHIRT 201309 3000 2500
EVERY MONTH END I WILL RUN THIS QUERY TO FIND OUT THE BELOW DETAILS
1. TO FIND ITEM_NAME WISE - QTY_RECEIVED AND QTY_SOLD ( FOR CURRENT MONTH - EXAMPLE SEP )
2. TO FIND ITEM_NAME WISE - QTY_RECEIVED AND QTY_SOLD (FOR CURRENT YEAR EXAMPLE FROM JAN TO SEP )
OUTPUT FOR SEPTEMBER MONTH LOOK LIKE THIS
SEP-MONTH JAN TO SEP
ITEM_CODE ITEM_NAME QTY_RECEIVED QTY_SOLD QTY_RECEIVED QTY_SOLD
AX TSHIRT 1000 3000 6000 5500
CX XLSHIRT 3000 2000 9000 7000
Pls advise me how to write queries for this
RdkJust FYI, you *can* edit your own posts, you know
Rdk wrote:
Transaction_YYYYMM (Date stored in YYYYMM format )
First "problem". Don't store dates as string. Store them as dates. It will save you so much headache don't the road you won't believe it.
True, this is a view, so maybe not as critical - assuming the underlying *DATA* is actually a date.
1. TO FIND ITEM_NAME WISE - QTY_RECEIVED AND QTY_SOLD ( FOR CURRENT MONTH - EXAMPLE SEP )
2. TO FIND ITEM_NAME WISE - QTY_RECEIVED AND QTY_SOLD (FOR CURRENT YEAR EXAMPLE FROM JAN TO SEP )
So yeah, based on these requirements, I'd recommend you make that column a DATE, not a string. Dates are easier to parse for date-related logic - such as month by month as you need here.
Using that, here's one way to do it:
with w_data as (
select 'AX' item_code, 'TSHIRT ' item_name, to_date('20130701','yyyymmdd') trans_dt, 3000 qty_recd, 2000 qty_sold from dual union all
select 'AX' , 'TSHIRT ' , to_date('20130801','yyyymmdd') , 2000 , 500 from dual union all
select 'AX' , 'TSHIRT ' , to_date('20130901','yyyymmdd') , 1000 , 3000 from dual union all
select 'CX' , 'XLSHIRT' , to_date('20130701','yyyymmdd') , 3000 , 2000 from dual union all
select 'CX' , 'XLSHIRT' , to_date('20130801','yyyymmdd') , 3000 , 2500 from dual union all
select 'CX' , 'XLSHIRT' , to_date('20130901','yyyymmdd') , 3000 , 2500 from dual
w_base as (
select item_code, item_name, trans_dt, qty_recd, qty_sold,
sum(qty_recd) over (partition by item_code, trunc(trans_dt, 'MM')) mm_recd,
sum(qty_sold) over (partition by item_code, trunc(trans_dt, 'MM')) mm_sold,
sum(qty_recd) over (partition by item_code, trunc(trans_dt, 'YY')) yy_recd,
sum(qty_sold) over (partition by item_code, trunc(trans_dt, 'YY')) yy_sold,
row_number() over (partition by item_code order by trans_dt desc) rnum
from w_data d
Select item_code, item_name, mm_recd, mm_sold, yy_recd, yy_sold
from w_base
where rnum = 1
IT ITEM_NA MM_RECD MM_SOLD YY_RECD YY_SOLD
AX TSHIRT 1000 3000 6000 5500
CX XLSHIRT 3000 2500 9000 7000 -
How to create a password file for executing psadmin command to deploy portl
how to create a password file for executing psadmin command to deploy portlet
What you have done is perfectly right. The password file doesn't have anything else apart from the password
for example in your case
$echo password > /tmp/password.txt
However I remember that in windows install, the Application server used to wait for a user's input when a deploy was to be done for the first time. So Can you read the Release notes or the Readme file which has come with windows.
The solution was,
manually use asadmin command of application server to deploy some war (any webapp will do), at this time, a question will be prompted to accept a certificate. once this is done, deploy portlet should work fine!!!
HTH -
How can we write the code for opening the command prompt and closing the
how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)
rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)? -
SQL queries for finding values in 4 different tables
I need to have certain queries to find specific data in this table, this is just an example table, but I will use the same ideas for my actual website and database.
customers (customerID: integer, fName: string, lName: string)
items (itemID: integer, description: string, price: float)
orders (orderID: integer, itemID: integer, aID: integer, customerID: integer, date: date)
addresses (aID: integer, housenum: integer, streetName: string, town:string, state: string, zip:integer)
Values I need to find are
List the town, first name, and last name of any customer who has shipped an item to the same town as another customer.
Return the average amount of money each customer spent in March of 2013. (Note that the answer will be a single number
List the first and last names of all customers who have had the same item shipped to at least two different addresses.
List the top two states that have generated the most total revenue and the revenue they generated
I did try a few different queries, for #3 I tried
SELECT customers.fName,
customers.lName,
COUNT(orders.itemID) AS `total items with diff address >= 2`
FROM customers
JOIN (SELECT customerID,itemID,
COUNT(DISTINCT aID) AS diff_address
FROM orders
GROUP BY orders.itemID
HAVING diff_address >= 2
) AS orders
ON orders.customerID = customers.customerID
but I only got 1 result, and I do not think thats correct.
Thanks for the help and I appreciate you taking the time to help meWhy not post the sample data + desired result? Always state what version you are using.
SELECT lname,A.aID,COUNT(*) cnt FROM customers C JOIN orders O ON c.Customerid=O.Customerid
JOIN address A ON A.aID=O.aID
GROUP BY lname,aID
Sorry cannot test it right now...
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Requiring several database queries for my GUI - where to put the reads?
Requiring several database queries for my GUI
Hi all,
I am to create a GUI with a couple of drop downs
These are populated from database queries, as well as the main program reading from the database based on all inputs in the GUI.
Should I put all database reads into a class as seperate methods.
e.g,
one method for the database read to populate the first combo box.
a second method to take the choice from combobox 1 and read from the database to populate combobox 2
a third method to then perform the main database read based on GUI selections from the above two methods..
is this the 'right' way to do it.
my GUI would then be in a sperate class.
or should I sperate the 3 database reads into 3 different classes?
thanks in advance,
MattBigDaddyLoveHandles wrote:
walker8 wrote:
You might also read some info on three tier design using MVC (Model, View, Control) if i recall correctly.
Here's an article by Martin Fowler on GUI architecture: [http://martinfowler.com/eaaDev/uiArchs.html]
awesome! that's just what i needed. i haven't read all of it yet but it gives me ideas about the classes i need.
regards
walker8 -
Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/HenrikHi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Queries for Vendor Master Data
Hello,
Does anyone know if there is any standard queries for vendor master data?
Thanks ans best regards
Maria StoneNothing standard. You can easily get it though. In the infoprovider right click and insert your characteristic as a Data target. Once done you can then create queries on you characteristice vendor.
pls assign points to say thanks. -
Please send me the link where i can find standard cubes,.....Queries for Inventory and Purchasing.... I think this is the link for inventory management please correct me if i am wrong. Pleasee send me the link for puchasing...billing, shipment,
http://help.sap.com/saphelp_nw04/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
Regards
Naga
Message was edited by:
naga yadavalliHi Naga,
You can start looking at the business content from this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Here you can also use the search box (upper right) and in the dropdown choose BI Content. Start looking at Supply Chain Management to find the sub areas for Procurement, Manufacturing and Inventory Management.
You can also find the best practices for some modules here:
http://help.sap.com/bp_biv170/html/bw.htm
Hope this helps...
Maybe you are looking for
-
Please Help: Recently I downloaded the new Itunes(Itunes 7). After downloading it I was prompted to upgrade my Ipod (30g Video) to the new system (1.2). Almost immediatly after finishing this download my Ipod turned off, and is now frozen and will no
-
Error while creating user for a domain
i am developing a web-application which is hosted on tomcat server. it is creating domains and users at another remote domain server. localy it is working fine.. but when i test it online.. the problem is, sometimes it works fine ,the domains are bei
-
How to create user defined functions in xi.
how to create user defined functions in xi. can anyone give info with screen shots.
-
If the battery pack is ruined do you think the computer will turn on if I use the charger
If the battery pack is ruined do you think the computer will still work and turn on if I use the charger
-
I CAN'T SELECT FROM USERTABLES ON LINUX IS IT ONE OF THOSE DAYS OR WE NEED TO REPLACE OUR COFFEE MAKER S.M.S null