Queries the proxy at launch

At first launch of firefox, to a site behind our proxy, the request for credentials still pops up. It only happens once, and then doesn't come back, but we don't give proxy access to everyone, and don't want it popping up at all unless they need it. I've removed as many auto update preferences as I could find, but it still happens.
We connect to the proxy using an autoconfig script.
We are working with thin clients so I don't have the ability to just upgrade software. But I can change the preferences at will.

turns out, firefox was querying the google anti-phishing site.

Similar Messages

Many security events have been identified by the proxy stack.

On our Lync Edge servers I can see lots of warning events are getting generated every second. Any idea how to stop this events.
Log Name:      Lync Server
Source:        LS Protocol Stack
Date:          3/26/2014 5:40:43 AM
Event ID:      14425
Task Category: (1001)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      servername
Description:
Many security events have been identified by the proxy stack.
In the past 55 seconds, 30 security events have been identified by the proxy stack. A large number of security events could indicate that the server is under attack. The last event was:
$$begin_record
LogType: security
Text: The connection from a remote user client is refused because remote user access is disabled
Result-Code: 0xc3e93d6d SIPPROXY_E_CONNECTION_EXTERNAL_INTERNET_ACCESS_DISABLED
Peer-IP: 192.168.10.1:50224
Peer: 192.168.10.1:50224
$$end_record
Cause: The server may be under attack, or there might be a configuration problem that is causing errors.
Resolution:
Launch the Lync Server 2010 Logging Tool. Select the "SIPStack" component, the "Errors" level and the TF_SECURITY flag. Review the events reported to the trace log using the "Analyze Log Files" feature of the logging tool.

Hi,
What's your Edge NIC and certificate configuration? And the DNS SRV records?
It may happen because the Lync server does not pass the correct certification authority information back to the Lync client during the negotiation of the TLS connection.
You can refer to the part “Workaround” in the link below:
http://support.microsoft.com/kb/2464556
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

My Firefox won't load any websites, but other web browsers will. I have tried following the proxy help to fix this, with no luck. What can I do next?

Any website I try to visit using Firefox won't load, it just keeps saying that it is unable to connect. I tried other web browsers, and they work no problem. I tried following the proxy steps provided, but did not help.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
If you use a Firefox 4 beta release then you should create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

I am not able to access gmail. Error reading -The proxy server is refusing connections. Please help

I get the attached error message when trying to access my gmail account "The proxy server is refusing connections. Firefox is configured to use a proxy server that is refusing connections. The problem started today. No issues before.
Second problem although less of a concern - I am using Firefox 16.0.2.I tried to update to latest version and got the following message " ERROR The requested URL could not be retrieved"
I can still access my gmail account though my IPAD

hello, i've tried it with a fresh copy of a catalan firefox & it's showing up as expected for me...
please try if it's the same when you launch firefox in safemode once (then it might be an issue with an extension hiding this setting) or else try a reset of firefox.
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Reset Firefox – easily fix most problems]]

I accidentally Imported the Proxy Media!

Hello, I'm working on a music video and this was my first time using proxy media. I accidentally imported the proxy files, rather than going to preferences and changing it there... So it thinks that the proxy files are the actual files. I've spent many hours editing this video and i was wondering if there's any way to trick FCP X into thinking that when I drag in the actual video files to my project, and try to replace them with the proxies, that it thinks its the same file? If anyone knows a way around this, please let me know! I'm hoping I didn't waste 8+ hours editing this video -_-
Thanks!
-Jordan

Well yes. A duplicate name will have fcp1(and so forth) appended to the name. But I still don't don't know what which one is the low res file and which is the real original.
I'm also not sure how you ended up here. When I tried a test project and event, I wound up with aliases to my proxy files in my Original Media folder. But I suppose how this happened is beside the point.
If you try to relink, FCP will look only for the fcp1 files – whether you relink from the project or event. So I think your best bet is to get rid of those proxy files and rename each of the original files appending the fcp1.
Since there are more than a few unknowns here, I think what I'd do is close FCP. Then In the Finder, create a new folder outside the event called hidden proxy or something. Move those proxies yo that new folder. Next, as a test rename one of the files in the Original Media folder. Launch FCP, and try relinking that single file from the event. If it works, open your project and see whether it sees the renamed file in your event.
Russ

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

Why won't my applications purchased from the itunes store launch on my macbook pro? My software is up to date.

I purchased a few games from the app store recently. I have updated all of the software on my Macbook Pro but the applications will not launch. If the problem was contained within just one application, I could have fixed it, but neither of the applications will launch. I click on them, they turn blue, but that's it. I do not have an iPhone or iTouch with which to test the applications. Could somebody tell me what is wrong with my computer/the applications and how to fix them?!

Hello ah3636,
Apps on the iTunes store are made for the iPad, iPhone and iPod Touch and not the Mac.
By any chance, do you mean the Mac App Store?
Regards,
Tim

How do i set the proxy user in FF 3.6.13, this entry was existing earlier its gone now. using IE with entries in user account pwds works while FF doesn't.

How do i set the proxy user in FF 3.6.13.
previous versions had an entry for proxy user.
its gone now.
using IE with entries in user account pwds works while FF doesn't.
too bad have to change back to IE :-(

You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]]

How can I create an application shortcut in the KDE App Launcher?

I installed Komodo Edit, and can run the application like this:
cp to: /users/myuser/Software/Komodo-Edit-6/bin
run: .komodo
Is there a way I can add the shortcut icon to the the KDE App Launcher under Development?
Thank you

Akael wrote:Is there a way I can add the shortcut icon to the the KDE App Launcher under Development?
Please look up for *.desktop file structure, all you need to do is create a /usr/share/applications/komodo.desktop file with the appropriate content. You can start with any other desktop file as template.

Is there a way to force the proxy.pac RELOAD before sending a UIWebView request?

I'm working with a dynamic .pac remote file.
When i start my app, i get the proxy automatic configuration only the first time...
Is there a way to force the PAC reload every time I use a UIWebView ?

sure, create a listener that waits for the complete event, then play the video.

How Can I pre-configure the proxy settings in Acrobat 8?

We use a proxy server to authenticate users and it's causing a problem for our e-licensing. Is there a place to pre-configure the proxy settings / login and password for the e-licensing to happen quietly so our users don't have to see it?

Have you searched the forum for proxy? I do not have an answer, but this has been discussed before. I am not sure there is an answer in the discussions, but it is worth a try. There is likely a knowledgebase article on the issue also. Good luck.

Error while creating the proxy object to connect to a third party tool.

Hi,
I tried creating a proxy object with the wsdl file. I even created a HTTP connection to the third party tool. but when I try to execute the whole proxy object, I am getting the below error. Can anyone help me on this?
"Proxy-Generierung: Fehler aufgetreten"
"Incorrect value: Entity "<<document>>"(92 /3788 ). end tag 'ul' does not match begin tag 'p'"
Thanks & Regards,
Veerabhadra Rao A.

do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM

Getting Error while creating the proxy generator in Dot Net Connector 2003

Hi,
While creating the proxy generator in Dot Net Connector 2003 i am getting following error: I am successfully able to login into the SAP system and able to select the SAP tables but during the final step of proxy generator wizard i am getting following error:
----
Error in Proxy-Generator
To create a proxy directly from a SAP system, you must install a Java VM from JavaSoft
Inner error was:
Object reference not set to an instance of an object.
OK

I have already installed the Java JVM on my machine its version is as follows:
java version "1.3.1_01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)
Regards,
Ravi Shah

Hi Amit,
I doing good!!!! Thanks for the response.
I uninstalled the earlier version of JVM and installed the latest version of JVM i.e. jre-1_5_0_09-windows-i586-p.
I got the proper entries under registry mentioned below:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\1.5.0_09]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"UseJava2IExplorer"=dword:00000001
"HideSystemTrayIcon"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment]
"CurrentVersion"="1.5"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.5]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"RuntimeLib"="C:
Program Files
Java
jre1.5.0_09
bin
client
jvm.dll"
"MicroVersion"="0"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.5.0_09]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"MicroVersion"="0"
"RuntimeLib"="C:
Program Files
Java
jre1.5.0_09
bin
client
jvm.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy]
"Country"="IN"
"PostStatusUrl"="https://sjremetrics.java.com/b/ss//6"
"EnableJavaUpdate"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start]
"CurrentVersion"="1.5.0_09"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_02]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_03]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_04]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_05]
"Home"="C:
Program Files
Java Web Start"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2.0_01]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2.0_02]
"Home"="C:
Program Files
Java Web Start"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.5.0_09]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
After installation I opened the Dot Net connector proxy client wizard . I followed the series of step during Dot Net connector configuration:
1. selected the SAP connector.
2. The next screen 'Enter Logon Information' comes where i entered the following information System as 'custom', host='IP address', Id='00' but by default it turns to '0' , client='800', user='user id' and password ='password'.
3. After clicking on Next button i am successfully logon into the SAP system.
4. The next screen in the wizard is 'selectall the remote function modules that you want to be part of your proxy object'. After selecting the SAP tables and clicked on Next button I am getting following error

Error in Proxy-Generator
To create a proxy directly from a SAP system, you must install a Java VM from JavaSoft
Inner error was:
INFO: using logging implementation "AII Logging"
Exception in thread "main" com.sap.aii.upload.api.LoginException$WrongPassword: Invalid user/password combination
 at com.sap.aii.upload.sap.SAPConnection.connect(SAPConnection.java:94)
 at com.sap.aii.upload.sap.SAPConnection.<init>(SAPConnection.java:38)
 at com.sap.aii.upload.tool.RFC2WSDLTool.getWSDLforRFCs(RFC2WSDLTool.java:81)
 at com.sap.aii.upload.tool.RFC2WSDLTool.main(RFC2WSDLTool.java:196)
OK

Thanks and Regards,
Ravi Shah

Error while executing the proxy service

Hi,
I have a procedure which uses a database link to access my tables. And business service will invoke this procedure through JCA.
We have created a datasource (Driver : non - XA for Service connections). However, while executing the proxy service it gives me below error.
Do i need to change the type of driver. Can anybody please help me on this.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header xmlns:com1="com:gm:vehicleengineering:engineeringworkorder:ewostatus:types:ewostatusschema:1:0" xmlns:com="com:gm:common:utilities:types:servicecontrol:1:0">
<com:ServiceControl>
<com:Service>EWOStatus</com:Service>
<com:Version>1.0</com:Version>
<com:ConsumerID>CID</com:ConsumerID>
<com:MessageID>MID</com:MessageID>
<com:SentTimeStamp>2008-09-28T21:49:45</com:SentTimeStamp>
</com:ServiceControl>
</soapenv:Header>
<soapenv:Body>
<soapenv:Body>
<com:ServiceFault xmlns:com="com:gm:common:utilities:types:servicefault:1:0">
<com:FaultCode>SOAFLT-999</com:FaultCode>
<com:FaultString>GeneralError</com:FaultString>
<com:FaultActor>Server</com:FaultActor>
<com:FaultDetail>Invoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/VehicleEngineering/EngineeringWorkOrder/EWOStatus/V1/WSDL/jcaEWOStatus_1_0_0 [ GetEWOStatus_ptt::GetEWOStatus(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'GetEWOStatus' failed due to: Interaction processing error.
Error while processing the execution of the SP_GETEWOSTATUS API interaction.
An error occurred while processing the interaction for invoking the SP_GETEWOSTATUS API. Cause: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Internal error: Cannot obtain XAConnection java.lang.ClassCastException: oracle.jdbc.driver.T4CConnection
 at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:1684)
 at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439)
 at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
 at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
 at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:126)
 at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94)
 at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162)
 at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.connectInternal(DatasourceAccessor.java:327)
 at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.connectInternal(DatabaseAccessor.java:295)
 at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.reconnect(DatasourceAccessor.java:558)
 at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.reconnect(DatabaseAccessor.java:1437)
 at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.incrementCallCount(DatasourceAccessor.java:303)
 at oracle.tip.adapter.db.DBConnection.getTopLinkSQLConnection(DBConnection.java:335)
 at oracle.tip.adapter.db.transaction.DBTransaction.beginInternal(DBTransaction.java:126)
 at oracle.tip.adapter.db.sp.SPInteraction.executeStoredProcedure(SPInteraction.java:93)
 at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:248)
 at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:534)
 at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:257)
 at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
 at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
 at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
 at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:572)
 at sun.reflect.GeneratedMethodAccessor771.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
 at $Proxy142.sendMessageAsync(Unknown Source)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:152)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:560)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
 at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:501)
 at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
 at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
 at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
 at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
 at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
 at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
 at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
 at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
 at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
 at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
 at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:375)
 at com.bea.wli.sb.transports.CoLocatedMessageContext$1.run(CoLocatedMessageContext.java:164)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
 at weblogic.security.Security.runAs(Security.java:61)
 at com.bea.wli.sb.util.security.SecurityUtils.runAs(SecurityUtils.java:58)
 at com.bea.wli.sb.transports.CoLocatedMessageContext.send(CoLocatedMessageContext.java:157)
 at com.bea.wli.sb.transports.http.wls.HttpTransportProvider.sendMessageAsync(HttpTransportProvider.java:215)
 at sun.reflect.GeneratedMethodAccessor771.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
 at $Proxy122.sendMessageAsync(Unknown Source)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:152)
 at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:560)
 at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
 at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:501)
 at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
 at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
 at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
 at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
 at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
 at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
 at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
 at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
 at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
 at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
 at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:375)
 at com.bea.wli.sb.transports.http.generic.RequestHelperBase$1.run(RequestHelperBase.java:152)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
 at com.bea.wli.sb.transports.http.generic.RequestHelperBase.securedInvoke(RequestHelperBase.java:151)
 at com.bea.wli.sb.transports.http.wls.HttpTransportServlet.service(HttpTransportServlet.java:127)
 at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:25)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3686)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
 at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks,
Chandana

Make sure that you are using non-xa datasources and in DBAdapter outbound connection pool configuration provide the data source JNDI in "dataSourceName" property instead of "xADataSourceName" property. Update the DBAdapter after changing configuration.
Regards,
Anuj

Queries the proxy at launch

Similar Messages

Maybe you are looking for