QUERRY FOR LAST 20 MINUTES FROM THE CURRENT TIME

hi i need to query one database table for the last 20 minutes from the current time, please let me know how to write the logic for this...
thanks for your help

Hi Sudhir,
You will have to consider couple of cases here.. for example you execute the report at 00:10 am of a day.. The date is already changed and if you will only code for the logic, then you will get wrong results..
Do as below:
MOVE sy-uzeit TO w_time.
IF w_time LT '002000'.
w_time1 = '235959' - w_time.
w_date1 = sy-datum - 1.
SELECT xxx
FROM yyy
INTO zzz
WHERE ( time GT w_time1
AND date EQ w_date1 )
OR ( time LT w_time
AND date EQ sy-datum ).
ELSE.
w_time1 = sy-uzeit - '002000'.
SELECT xxx
FROM yyy
INTO zzz
WHERE time GT w_time1
AND date EQ sy-datum.
ENDIF.
Thanks and Best Regards,
Vikas Bittera.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

Similar Messages

How to get the day value from the current time?

Hi,
I like to write a program that prints out the current time in the formate as "Thu May 3 07:57:02 PDT 2002". Then I want to get the day, time, year and month value out and do some manipulation.
I know to format the current time, I can use
SimpleDateFormat formatter
= new SimpleDateFormat ("EEE MM.dd hh:mm:ss z yyyy");
Date currentTime_1 = new Date();
Now how do I get the day, time, year and month value? All the getday(), gettime()..,method have been deprecated. Can anyone provide the answer?
Thanks.

Try using Calendar.get(int) and take a look at the constants used to specify the field you are trying to access.

[kde] "Only show tasks from the current desktop" doesn't work for max

Hi,
I have two monitor setup (laptop + main monitor) and I would love to use "Only show tasks from the current desktop" option in KDE Task Manager but for some strange reason it doesn't work for me. Well, it works but only partially - for restored/unmaximized windows. When I maximize one it appears on the Taskbar on both screens. Is this normal? May it be due to the fact that I've placed Taskbar on top of the screens?

Did you miss this bit
"Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
And the final image clearly states the type of Graphics Card he has
Photoshop CS6 GPU FAQ
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)

Java always returns 15 minutes greater than the current time.

Hi,
I am using Microsoft Windows Server 2003R2,Standard X64 edition with Service Pack 2 and jdk1.6.0-03.
Java always returns time 15 minutes greater than the current system time.
eg:
SimpleDateFormat simpleDateFormat=new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
System.out.println("Now time: "+simpleDateFormat.format(new Date()));
System.out.println("Now time: "+new Date());The output of the program is :
Now time: 2008-12-22 18:47:04
Now time: Mon Dec 22 18:47:04 NPT 2008
When my actual system time is 6:32 PM or (18:32)
I have checked the current time with other programming languages like python and it always returns the actual date and time.
Note: To my observation java is always utilizing a time which is 15 minutes greater than the current time even for its log.
Thanks,
Rajeswari (Msys)

I think a more practical time machine would be one that actually travels back in time rather than forward (by 15 minutes). Sounds like it needs some more work.
Anyway, I suggest changing the system time on your computer to some other value (say, 2 hours ahead), then running the program again. If its off by 2 hours and 15 minutes, its getting the time from your computer. However, if its still off by only 15 minutes (from your wristwatch's time), then its getting the time form somehere other than the computer clock.

2nd Previous Period from the current period

Hi MM Gurus,
Is it possible in MM to open a 2nd previous from the current period?
Please advise,
Thanks,
Themba

hi,
> Check the OSS NOTE 487381
You can only open the last period via using the MMPI..using indicator allow back posting...
Other than this you can open pervious periods for sandbox techniques. as well ....but SAP don't recommend it...
check few posted threads on SDN...
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Jun 2, 2009 9:52 AM

Message Created time past the current time even accounting for set clock sk

I'm getting the following when sending a message to a WebLogic 10.3 Web Service through OWSM security padding.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<faultcode>wsse:InvalidSecurityToken</faultcode>
<faultstring>Security token failed to validate. weblogic.xml.crypto.wss.SecurityTokenValidateResult@39b53a[status: false][msg UNT Error:Message Created time past the current time even accounting for set clock skew]</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
On server side's TCP/IP Monitor I see the message received has <wsu:Created>2010-07-30T19:34:17Z</wsu:Created> in security header, the timestamp of TCP/IP Monitor showing time of request is 2010-07-30 12:32:51PM.
Seems like the sender's clock is two minutes ahead of server.
How do I adjust to lax the clock precision between client and server. Which side do I set the properties and what are the properties I need to set? Thanks

Pam,
from what i have gathered while trying to set mine up, the Time Capsule doesn't like other things broadcasting a wireless signal while it is trying to do the same... or at least, the other computers in the area can only recognize one at a time.
So, in your case, you are using your MacBook Pro to wirelessly share the AirCard connection, right? If so, your computer is acting as a router, which means you have two devices trying to connect your computers to the same network wirelessly. I think this is why your computer isn't able to "see" your time capsule wirelessly. What i would recommend for you is to hook up your aircard to a computer that is not used very often, and (if it has a wireless adapter), turn the wireless adapter off. This way, you have only one device doing the wireless connecting (the Time Capsule in Bridge mode), which will direct internet traffic through ethernet to the connected computer.
So, in conclusion, i just don't think it's possible to do what we want to do completely wirelessly.

How can i stay logged in on iPhone Skype after i delete the app from the 'current' apps?

How can i stay logged in on iPhone Skype after i delete the app from the 'current' apps?
Thanks for ur answers !

You are correct. There is no other way to recover this material, and yes it would have been a good idea to backup the iPhone prior to the restore. Remember that a restore to a previous date deletes everything on the device and puts it back to the state of things on the date you choose. The texts and contacts would be gone. Did you possibly sync the contacts with a supported application on the computer? That is the only other way to recover contacts. They are designed to be synced with a supported application on the computer, or with a cloud service such as iCloud, Google or Yahoo.

How can I get a digital WDT that includes all samples, not just the one for the current time step...?

See block labeled ''digital data'' in my attachment for reference. Currently, only the digital data point for the current time step can be seen (it is deleted before the next one appears). However, I would like it display all the samples in the table like in the example found at this link under ''Digital Waveform Control'':
http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/fp_controls_indicators/
Many thanks for any suggestions! I am new to Labview, so I appreciate your help.
Solved!
Go to Solution.
Attachments:
myproject.vi ‏220 KB

Hey westerman111,
If you're looking to produce have your display include the solution information from previous solver steps, you will need to buffer the previous data. The way to implement this in a Control Design & Simulation Loop is using the Memory.vi found under Control Design & Simulation > Simulation > Utilities > Memory.vi. It will allow you to save previous information generated in the simulation environment for letter solution steps.
I've attached an example that should get you started in using the Memory.vi.
I would also make sure that what you're looking to accomplish is suitable for the Control & Simulation Loop. I know you mentioned you were new to LabVIEW so I wanted to make sure you were heading off in the right direction. Is there a particular reason why you are using the Control & Simulation Loop instead of a standard While or For Loop? The Control Design & Simulation loop is unique in that it calculates the solution of a dynamic system at a prescribed time step and ODE solver. It also provides the tools to interact with the model you are solving during execution. However, if you are simply looking to perform data acquisition and measurements (instead of dynamic model simulation) I would recommend using standard LabVIEW functions.
Here are some useful references for getting start with both LabVIEW and the Control Design and Simulation Module.
Tutorial: Getting Started with Simulation (Control Design and Simulation Module)
http://zone.ni.com/reference/en-XX/help/371894G-01/lvsimhowto/sim_h_gs/
Getting Started with LabVIEW
http://digital.ni.com/manuals.nsf/websearch/ba2fb433a7940e7a862579d40070cc2c
Tim A.
National Instruments
Attachments:
myproject_edit.vi ‏249 KB

I have a ipod classic 5th gen 30gb, if i download a movie or song from the current itunes i use with my ipod touch will it play? or do i have to get another type of itunes, if so which one?

i have windows 7 and a2nd gen ipod touch and i just aquired an ipod classic which is a 5th gen from 2005 with a 30 gb capacity. can i download a video movie or episode and songs from the current itunes i use for my ipod touch or is there a different one i should use? please help.

You can plug the iPod into the same iTunes library as your iPod Touch and sync whatever content you like to it. There is no limilt to the number of iPads, iPhones, or iPods you can sync with one iTunes library, account, or computer. How you sync one device will not affect the syncing preferences of the other.
B-rock

Addition of a new field "Leave Details" in the LTA screen with dropdown val-ues from Infotype 2001 subtype ITEL. From the current calendar year in ESS

Hi Experts,
we are using portal 7.3 version,Our requirement is addition
of a new field “Leave Details” in the LTA screen with dropdown values from Infotype
2001 subtype ITEL. From the current calendar year in ESS.The new field should
be available only for the claim type LTA claim or claim against advance.
please find the below screen shot and details.
Current View
Component: HRESS_CLMS_WD_EMCR
Personalization: 4370750342A6297CC184E2B07FE6D13E
Window: W_CLM_DYN_UI
View: V_CLMS_DETAIL
Application Component: PY-XX-RS
Kindly help me how to add this field and in which method can i implement code.
Thank you in advance
Regards,
Vanitha

Hi Shankar Reddy,
Business requirement is the new field should display the list entry in Infotype 2001 for the calendar year as selection option for employee. they would like to know ITEL subtype claim,
Example.employee no: EE#9941
As per screen shot you may see for EE#9941 there are 2 Leave requests.
So in the leave details the selection drop down menu option or any other way should be display 2 lines.
Regards,
Vanitha

In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is overheating. What would that be - so I can have repairs done? The

In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is
overheating. What would that be - so I can have repairs done? The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
<Edited By Host>

Hello USME,
'Tis a common problem on old Macs.
Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
Good luck!... Jon

How to get the transaction_id from the current session of the current trx?

Hello Gurus,
How can get the hr_api_transactions.transaction_id from the current session to use it in my SQL script in VO.xml?
I don't know if I can get the item_type, item_key from the current self service session in iRecruitment? to use it in hr_transactions_ss.get_transaction_id(p_item_type, p_item_key)
I saw something icx_sec.getID(icx_sec.g_transaction_id)!
Can I use this in the where clause of the SQL part of my VO extension?
Thanks for all the help!
FR

Hi!
Try this thread:
http://help.sap.com/saphelp_nw04s/helpdata/EN/80/b2dd3a6dac703be10000000a11405a/frameset.htm
brgs Ziggy

Calculate previous Sunday from the current day

Hi Gurus,
Can anybody tell what is the name of the function module which caluclates the previous Sunday from the Current system date. or any other idea how to calculate previous sunday from the current system date in Query.
Thanks
Liza

Hello,
See my previous thread to you for a similar Re: Find out previous Monday based on 0CALDAY
Thanks
Chandran

Selecting Invoice (OINV) records from the current financial year

Hi Everyone,
I would like to select Invoices (OINV) from the current Financial Year. I am located in Australia and our financial year is measured from the 1st of July to the 30th of June.
Here is a pseudo - code sample -
SELECT T1.DocEntry, T1.DocNum, T1.DocDate
FROM AU.dbo.OINV T1
WHERE "CURRENT FINANCIAL YEAR"
Notice above that I would like to replace "CURRENT FINANCIAL YEAR" with an SQL code snippet that selects all dates from the beginning of the financial year (1/07/xx) to the current date.
Any help here will be greatly appreciated.
Kind Regards,
David

Hi Everyone,
Here is a code snippet that permits returning only values from the current financial year -
DECLARE @day nvarchar(2) = DAY(GETDATE())
DECLARE @currentMonthAndDay INT = CAST(CAST(MONTH(GETDATE()) as nvarchar(2)) + (REPLICATE('0', 2 - LEN(@day)) + @day) as int)
DECLARE @StartOfFinancialYear DATETIME
SET @StartOfFinancialYear = CAST(YEAR(GETDATE()) - CASE WHEN @currentMonthAndDay<701 then 1 else 0 end as nvarchar(max)) + '0701'
SELECT *
FROM AU.dbo.OINV T0
WHERE T0.DocDate >= @StartOfFinancialYear
AND T0.DocDate < DATEADD(yy, 1, @StartOfFinancialYear)
Many thanks to Faheem for providing the answer to returning only results from the current financial year, in this thread: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2edbe630-faca-4f94-a014-04f5a832f81d/returning-results-that-fall-within-the-current-financial-year?forum=transactsql
Kind Regards,
David

The type of the value being assigned to variable ... differs from the current variable type

I am trying to load a variable on SSIS Execute SQL Task with a string value. I keep on getting an error message :-
“The type of the value being assigned to variable “User::LegacyColumns” differs from the current variable type”.
Below are the settings on my package:
Execute SQL Task Result Set –
Single Row
Variable Data Type –
String
The data to be loaded on the variable is a single row shown below:
FirstName,LastName,MiddleName,PatientType,Title
Can someone kindly help me to solve this as I’m lost for ideas.
Thanks,
Mpumelelo

Thank you Sorna. I think I have managed to solve it. After a long search I have found a solution which advises that I should use a Foreach Loop Container. The help is on this link:
https://social.msdn.microsoft.com/Forums/en-US/f46dea91-c26b-4ffe-ab1c-ebeef57c90b6/error-0xc001f009-at-mypackage-the-type-of-the-value-being-assigned-to-variable?forum=sqlintegrationservices
Mpumelelo

QUERRY FOR LAST 20 MINUTES FROM THE CURRENT TIME

Similar Messages

Maybe you are looking for