Query based on results

Hello,
I have columns like:
dth.VIN, dth.COMMAND_ID, cdh.COMMAND_RESULTS, dth.CREATED_TIMESTAMP, cdh.STATUS
with data like(examples):
VIN: 1234567891234567, COMMAND_ID: RT_FT_TR_PR, LT_FT_TR_PR, PLACARD, COMMAND_RESULTS: 09 03 04 05 08 10 1A 23, CREATED_TIMESTAMP: 02/03/2007 02:23:34 PM, STATUS: null, 1, 0, -1
I need to create 4 additional columns in my results:
LF_STATUS, RF_STATUS, RR_STATUS, and LR_STATUS
which will have the results of the cdh.STATUS but only if the command_id matches.
For example, if command_id = RT_FT_TR_PR then I want to populate the RF_STATUS column with the results of cdh.status, and leave the other three columns blank, the same for command_id = LT_FT_TR_PR I would want to populate LF_STATUS with the corresponding cdh.status results for that one vin.
Is this possible?

Hi!
Have tried this at all. First try it, then if u have any problem - share it with us. That will give u some additional confidance. Hope u don't mind.
Regards.
Satyaki De.

Similar Messages

Running query based on other query result

Hi Again Friends.
first of all i am very much thankful for members who sent me prompt response and been helping for last 2 days.I am again with query,maybe a lame one.
I want to run a query based on record return from previous query.FOr instance i have query
Select sum(marks) from studentMarks,student_id where course_Id=4 and student_Id
IN
(Select StudentId from Student where dept_id=3)
the courseID and studentID are being repeated in the above table
now I want to show Student Names with the marks Obtained and who belong to dept_id=3,i want to run other query to get Name based on StudentId resutned from previous one.
Is there anyway to do this in oracle to save result in some resultSe and use it later?
Thankyou

Do you mean something like:
Select sum(marks), S.StudentId, S.StudentName
from StudentMarks M
, Student S
where S.course_Id=4
and M.Student_id = S.StudentId
and S.student_Id
IN
(Select StudentId from Student where dept_id=3)
group by StudentId, StudentName

Create Materialized View based on Results from LDAP Query

Hi -- I'm trying to create a materialized view based on results from an LDAP query. Unfortunately, it looks like a materialized view can't be created based on a stored procedure, which is where the LDAP results are obtained (using nested loops).
Does anyone have any idea how to do this without first kicking off a stored procedure that populates a temp table which would be used to create the materialized view? I'm trying to minimize the steps that the DBA's will need to go through when refreshing this new view.
Thanks,
~Christine

Can you give us more details about the stored procedure you're calling. It will help to know what parameters are involved and what data types they are.
Off the top of my head though it looks like, at the very least, you would need a stored function that calls the stored procedure. I don't think there is any way to call stored procedures from CREATE ... commands. If you're going to create a stored function anyway ... well, you might as well just create a procedure that inserts values into a regular table instead of fussing with functions and materialized views. You'll probably want to schedule your new procedure to run periodically since it sounds like you'll need the values refreshed from time to time.

RWI 00200 Error while scheduling the Bex Query based Webi report

Dear All,
I am facing the below error while scheduling the Bex Query based Webi report.
Error:RWI 00200
We are using BO XI 4.0 Sp05.
Please advise

Hi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma

Query Based Taxonomy - Dynamic Creation of a Query Problem

Hi,
I'm trying to create new category nodes in a taxonomy and to assing them queries. I know how to do this, but I encountered a strange behavior. Here is the situation:
I have a string property DocumentType. When manualy creating a query, it looks like:
DocumentType CONTAINS "Some string"
But when I do the same using code I get:
DocumentType IS "Some string"
And as a result of this, the taxanomy is not working properly.
Here is the code:
     indexService =
     (IIndexService) ResourceFactory
     .getInstance()
     .getServiceFactory()
     .getService(
     IServiceTypesConst.INDEX_SERVICE);
     //        This kind of classification index offers functionality working with query based taxonomies
     qbcIndex = (IQBClassificationIndex) indexService.getIndex(indexId);
     //        Get a query folder - a query folder is a representation of a query based taxonomies category
     queryFolder = qbcIndex.getQueryFolder(RID.getRID(folder));
     //        List of IQueryEntry objects for the query folder
     queryEntryList = queryFolder.getQuery(context);
     //        Cast the IQBClassificationIndex into a ISearchIndex object
     searchIndex = (ISearchIndex) qbcIndex;
     queryEntry = searchIndex.getNewQueryEntry();
     queryEntry.setRowType(IQueryEntry.ROW_TYPE_ATTRIBUTE);
     queryEntry.setPropertyName(propertyName);
     queryEntry.setPropertyOperator(IQueryEntry.PROPERTY_OPERATOR_EQUAL);
     queryEntry.setValue(propertyValue);
     queryEntry.setTermAction(IQueryEntry.TERM_ACTION_EXACT);
     queryEntryList.add(queryEntry);
     //        Set the query for the query folder
     queryFolder.setQuery(queryEntryList, context);
     qbcIndex.updateCategoryContents("Document_Types", false, context);
Can somebody tell me what am I doing wrong please. Isn't it because of IQueryEntry.PROPERTY_OPERATOR_EQUAL? Is there any substring operator?
Thanks a lot.

Hi, Robert
In this moment, I have a problem with Query Based Taxonomy, maybe could you help me. I insert the query in to the taxonomy from code, but when i use the method
qbcIndex.updateCategoryContents("/taxonomies/borrame5/Prueba2", false, context);
I got the next exception:
#1.5#0014C210F3D1002A000001200000565B000431CC93AD5979#1180654627543#System.err#sap.com/irj#System.err#dummy01#10241#####SAPEngine_Application_Thread[impl:3]_17##0#0#Error##Plain###     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)#
#1.5#0014C210F3D100310000012B0000565B000431CCC47166AB#1180655445698#System.err#sap.com/irj#System.err#dummy01#10241#####SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###com.sapportals.wcm.service.indexmanagement.IndexNotReadyException: Some documents are not included in this update because indexing has not been finished yet.#
#1.5#0014C210F3D100310000012C0000565B000431CCC4717417#1180655445701#System.err#sap.com/irj#System.err#dummy01#10241#####SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###     at com.sapportals.wcm.service.indexmanagement.retrieval.trex.AbstractTrexIndex.updateCategoryContents(AbstractTrexIndex.java:2493)#
I have doubt what parameters i need to pass to the method updateCategoryContents,
Let me give some information:
taxonomy:
   /taxonomies/borrame5/Prueba2
repository:
   /documents/Portal_KOF/KM/Pruebas1/Pruebas Versionamiento
classification and search index:
   borrame5
   I can't classify automatically, when i insert the query from code. When I manually insert the query from the portal, automatic classification run perfectly.
Thanks
Greetings
JARO.

SELECT QUERY BASED ON SECONDARY INDEX

Hi all,
CAN ANYONE TELL ME HOW TO WRITE SELECT QUERY BASED ON SECONDARY INDEX.
IN WHAT WAY DOES IT IMPROVE PERFORMANCE.
i KNOW WHEN CREATING SECONDARY INDEX I NEED TO GIVE AN INDEX NO -iT SHOULD BE ANY NUMBER RIGHT?
I HAVE TO LIST ALL PRIMARY KEYS FIRST AND THEN THE FIELD FOR WHICH I AM CREATING SECONDARY INDEX RIGHT?
LETS SAY I HAVE 2 PRIMARY KEYS AND I WANT TO CREATE SEONDARY INDEX FOR 2 FIELDS THEN
I NEED TO CREATE A SEPERTE SECONDARY INDEX FOR EACH ONE OF THOSE FIELDS OR ONE SHOULD BE ENOUGH
pLS LET ME KNOW IF IAM WRONG

HI,
If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVINGclauses, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
You create secondary indexes using the ABAP Dictionary. There you can create its columns and define it as UNIQUE. However, you should not create secondary indexes to cover all possible combinations of fields.
Only create one if you select data by fields that are not contained in another index, and the performance is very poor. Furthermore, you should only create secondary indexes for database tables from which you mainly read, since indexes have to be updated each time the database table is changed. As a rule, secondary indexes should not contain more than four fields, and you should not have more than five indexes for a single database table.
What to Keep in Mind for Secondary Indexes:
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb2d446011d189700000e8322d00/content.htm
http://www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
Regards
Sudheer

Problem with query based LOV

Hi,
Maybe someone could help me with the following. I think it is a shortcoming of HTMLDB, but I'm not sure.
I've got a Select List item, P10_PERSON, which resides in a tabular form. The Select List is based on a query, say:
select name   display_value
,      id     return_value
from   personAs is should be, P10_PERSON shows only the names.
When my action is an insert or modification, the results will be writen in the table PERSON_MEETING.
Now I want to make sure that the same person coulden't be selected a second time for the same meeting. So I alter the query based LOV with the following:
select name   display_value
,      id     return_value
from   person
where id not in (select person_id
                  from   person_meeting
                  where meeting_id = :P10_MEETING_ID)This sounds correct and works in Designer, but not in HTMLDB. The NAME isen't shown anymore, instead the ID is shown in the page.
Is this because the person doesen't actually exists anymore in the LOV after it has been saved (stored in PERSON_MEETING)? If so, does anyone knows a work-around?
Thx!
Message was edited by:
F. Klein
(removed typing error)

I've got 3 tables. PERSON, MEETING and PERSON_MEETING.
They have the following structure:
# PERSON            #
# ID   NUMBER       #
# NAME VARCHAR2(50) #
# MEETING                   #
# ID          NUMBER        #
# DESCRIPTION VARCHAR2(100) #
# PERSON_MEETING    #
# ID         NUMBER #
# PERSON_ID NUMBER #
# MEETING_ID NUMBER #
#####################In PERSON there are 3 records, in MEETING there is only 1.
PERSON:
ID     NAME
1      KEVIN
2      BILL
3      JOHN
MEETING
ID     DESCRIPTION
1      DEVELOPERS MEETINGNow I want to link the persons to a meeting in the PERSON_MEETING table.
The column MEETING_ID will be filled automatically through a variable or parameter (I don't know the exact term).
I defined the PERSON_ID column as an query based select list with the query:
select name   display_value
,      id     return_value
from   personThis works perfectely, the select list (or lov) shows KEVIN, BILL and JOHN. When I select BILL and save my adjustment, the following record will be shown in PERSON_MEETING
PERSON_MEETING
ID     PERSON_ID     MEETING_ID
1      2             1Now that I inserted BILL as a participant for the Developers meeting he should be removed from the select list. Only KEVIN and JOHN should be in the list. Therefore I change the query of the select list into:
select name   display_value
,      id     return_value
from   person
where id not in (select person_id
                  from   person_meeting
                  where meeting_id = :MEETING_ID):MEETING_ID is the item in the page containing the ID of the meeting.
When I make this adjustment, the select list only contains KEVIN and JOHN (as it should), but the first record shown on the page (record with BILL) doesen't show BILL anymore, instead his ID will be shown (2)...

Query based on dynamic url paramter

I am displaying all the results of a simple select statement on one page in an html table. One of these colums displays the unique ID of every row returned from the query. I want to make the ID field an active link, whereupon when the user clicks it, they are taken to seperate page where information for just that row is displayed. I'd imagine you have to pass the ID for that specific row to the next page via the URL, and run another query based on that specific ID to retrieve the information. I just don't know how to have the URL variable equal the ID for each row. All I can find is static examples such as 'www.gotopage.jsp?ID=1234'.

while displaying the result in html table,
form the href like this
String id = resultSet.getString("ID");
<a href="gotopage.jsp?ID=<%= id%"></a><%=id%>.......
or post your code and we may be able to point it out.

Select query based on userinput

Hi Folks...
I posted this in another forum, but no reply,so I am posting it here too. I am trying to make a select query based on a user input. Earlier I was having probelms making a select query and printing out the result in the stack trace,with the advice given, I managed to solve that. I am now modifying that code to make a query based on user input, however it's not working, following is the code:
String userId = request.getRemoteUser(); String sql = "SELECT hoursused FROM sysuser WHERE iduser = ?"; try { Connection connection = dataSource.getConnection(); PreparedStatement preparedStatement = connection.prepareStatement(sql); preparedStatement.setString(1, userId); ResultSet srs = preparedStatement.executeQuery(sql); while(srs.next()) { String hoursused = srs.getString("hoursused"); System.out.println("The hours used are " + hoursused); } } catch (SQLException e) { e.printStackTrace(); } }
stack trace seems to suggest I may have a probelm with this statement:
"SELECT hoursused FROM sysuser WHERE iduser = ?";
I am not sure how to rectify this, I hope someone can advise, thanks.

Hi jschell..
Thanks for responding, I appreciate it. The problem has been solved. No 'sysuser' is not a reserved word in Mysql. Based on the advice given in another forum and also from this site, I managed to solve the problem. I only made one change. This:
ResultSet srs = preparedStatement.executeQuery(sql); was changed to this:
ResultSet srs = preparedStatement.executeQuery(); Thanks.

Problem of running the jump query from the result line

Dear expert,
I have a problem when running a jump query from the result line. Apparently, the values of the caracteristics haven't been sent to the jump target. However, the configuration in RSBBS seems to be good as the jump works well from the other lines.
Does anyone have some ideas on that?
Thanks in advance!

Hi,
If you are supposed to bring across characteristic values to your target, then you will not be able to jump from the result line. The configuration expects that the values of the characteristic marked as being used in the jump are filled with unique values. When you use the result line as a source for your jump, the values in the result line will most likely be based on the sum of multiple characteristic values.
Hth,
-Jacob

Filter a Query Based on the Output of Another Query

Is it possible to run a query based on the put put of another query? I have two queries. One query is based on GL Line items and shows the account assignemnt of postings where a customer has had a debt raised and it been credited to an account assignment e.g. Order, Cost Centre or Profit Centre. The other query is on an AR cube and that shows payment made. I want to bring these together to show the owners of the various account assignments to what extent customers have actually paid the debts that have been raised and credited to them. This I do as the source document of the CO doscument matches the allocation of the ar document. So I have a query that shows the CO journal and another query that shows payments. But I only want to show the payments in the second query for documents displayed in the first query (which can be restricted by period and fiscal year and the particular account assignment).

Hi,
This can be acheived by usign a replacement path variable.
Create replacement pathe variables for those the filter values in the second report nneds tobe restricted from the first.
Then in the properties of the varioable say replce by query result and input the first query name in it.
Use these variables in teh filter section of the second report.
Make sure the characteristics for which you created the replacement path variables are in teh row section of the first Query.
Now on executing the second query you will have it filtered based on teh values of the first Query.
Hope this helps.
Regards.
Shafi.

Choose display template based on result type - Content search webpart

Hi
Is it possible to choose display template based on result type in content search webpart same like search results web part? If not available can it be achieved programmatically?
The content search web part is queried against document content type. Based on the document type, the document has to be seen in the hover template.
Please advise.

Hi,
From your description, my understanding is that you want to choose display template based on result type as search result Webpart in Content Search Webpart.
You could customize your display template for Content Search Web Part, please refer to this article:
http://www.benprins.net/2014/05/21/sharepoint-2013-custom-display-template-for-content-by-search-web-part/
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to access query based view object in backing bean

Hi
I am using JDev11.1.2.1.0
I want to use the query result of query based view object in backing bean.
How can i do the same
Please Solve this
Thanks

Hi,
Assuming ADF is in the picture
1. Create a PageDef file for the page (right mouse click "Go to Page Definition")
2. In the Executable section, create an iterator for the View Object
3. In the managed bean:
BindingContext bctx = BindingContext.getCurrent();
BindingContainer bindings = bctx.getCurrentBindingsEntry();
DCIteratorBinding iter = (DCIteratorBinding ) bindings.get("name of Iterator");
iter.execute();
// ... navigate the iterator rows ...//
Frank

Filter a query based on virtual characteristic

Hi,
I have a query with a virtual characteristic.
I need to filter the query based on the results in that characteristic.
Can it be done?
If not, can I delete records after the stage where the characteristic is filled and before the result of the query appears?
Thanks,
Hagit

Hi Hagit,
To filter a query on the value of a virtual characteristic value directly would not be possible.
Please check the below Forum topic and see if the note 1088469 helps you find a solution to your problem.
Virtual characteristics or key figures load data with BIA/BWA?
Alternatively, you can think about using a query viewwith filter to filter the virtual characteristic value. Do not have a refined solution suggestion, but you can think in that direction, I guess.
Hope it helps.
Thanks,
Abhishek.

Query Based Taxonomies

Hello,
I've created successfully a query based taxonomy. I also defined the queries to the folders within the taxonomy. Now my problem is, that a document only belongs to one folder. But in some cases, that's not nice, e.g. when you want to navigate through the hierarchy.
Example:
I've got a structure like Folder F1, under that a Folder F2.
For folder F1 I defined a query: property P1 contains value V1.
For folder F2 I defined a query: property P2 contains value V2.
After updating the taxonomy it should now be possible, that documents which are classifications of folder F2 also classify to folder F1.
How to do that?
Help would be appreciated.
Best regards,
Denis

Hello Karin,
thank you for your answer. Does this mean, that a navigation through the taxonomy hierarchy is not possible (e.g. with a km navigation iView?). Taxonomies are stored in KM under /Taxonomies and I thought that a navigation with a km navigation iView is possible. But I think the real benefit of taxonomies is, that the deeper the hierarchy folder is, the more classified and smaller are the results. But when documents get only classified to more folders when the folders are on the same hierarchy level, how should a navigation be realized?
Thanks in advance.
Best regards,
Denis

Query based on results

Similar Messages

Maybe you are looking for