Query Designer configuration
Hi,
I'm trying to debug a configuration problem with query designer when it connects to my BI 7.0 server. Here is the problem:
start - all programs - business explorer - query designer
I then connect to my SAP BI 7.0 system using my personal id that has sap_all sap_new authorities
From the Query designer I select query - open
then I select -
info areas - human resources - personal administration - headcount and personal actions - headcount/change in staffing level
Then Execute ...
My web page opens up with...
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q001&VARIABLE_SCREEN=X&DUMMY=1
For some reason the hostname and port are missing. Does anyone know where this is configured?
Thanks,
Lee
Bhanhu,
Thanks for the quick response. I am the basis administrator for this server. This system was built by a redirected restore, so I'm trying to figure out where these settings are adjusted. Do you know the profile parameters that would be used in RZ10 or the settings in RSPARAM. I looked in RSPARAM but I did not see where this could be set. Any leads would be helpfull.
Thanks,
Lee
Similar Messages
-
Error publishing Query designer report to Web
Hi all,
I am facing error after executing the query in query designer in BI 7. The query fails to open in web and points to standard url:
http://portal-dmb.wdf.sap.corp:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=EX4_TBW20&VARIABLE_SCREEN=X&DUMMY=7
"Link appears broken"
Initially I have configured the web connectivity using the How to guide and carried out config in SMICM as well as SICF (activating BW node). If I enter the url from SMICM manually in IE, it would prompt for user/password for BI server and successfully logs on.
The issue only lies when publishing query from Query designer to web. Please advise if I have missed out some config here.
Thanks.Hi,
check this notes/links if you have done all steps:
SAP NetWeaver 2004s: Setting Up BEx Web
SAP Note Number: [917950|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_sys/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393137393530%7d]
[Setting up BEx Web - Short Track|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c4742a-3a4b-2b10-b4ae-b03d08bcde6e]
BI 2004s: Checking Java Connections Web Application Designer
SAP Note Number: [989525|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393839353235%7d]
Regards
Andreas -
Need help in bex query designer
hi experts ,
Actually we had a ODS where the KPI's values for all weeks are present and also the module.
in the query designer we need to show the targets for respective KPI's modulewise.
the requirement is
module-selections
week no-selection
targetweek1week2---week3
KPI1--10090---90--
90
KPI2--95-7885-----90
based on the module selection the targets values should change and also there should not be any restriction on weeks.
and also exceptions needs to be done for color coding.
we actually implemented cell defination for getting the above requirement , but here the problem is that we need to fix the targets and there is arestriction on the weeks . but the requirement should be dynamic i.e, the targets should be configurable and the weeks should not be restricted.
in the backend ODS all weeks data is present. we just need an idea how to fix these targets and also color coding for the respective KPI's without using cell defination.
Kindly throw some pointers how to acheive this..
thanks in advance,
MadhuHi Madhuri,
Ur requirement can be done by using a customer exit variable,keeping any sap stand. time characteristics value.
If u want to define the any selection dynamically,make a new selection with the text variable and call the customer exit variable into it and assaign the corresponding KPI into it and there by u can define the offset value as well.
for writting the customer exit,u need to contact ur ABAP'er and say the requirement.
Hope this helps!! -
Link to Web Analyzer from rsrt or query designer does not work.
If I start with the transaction RSRT a query in the Java Web would get the following error message:
Java Runtime Error
But if I had started earlier browser, the portal there is no problem. Is this a SSO problem?
The same problem I have when I would run in the Bex Query Designer the query.
Greetings
KerimHi,
Do you have all the parameters correct in SPRO? Take a look at this, under the BW Customizing -> REporting relevant settings or BW Customizing -> SAP Web Application Server.
I dont remember the right place where you have to configure this, but it should be there.
The error is just "Java Runtime Error"? Try to talk with your Basis team, maybe there is a log to help you.
Regards, Federico -
Error while Executing from BI 7.0 (Query Designer)
while exicutting query from Query designer i BI 7.0. I m getting following error message.
Please check and reply back...
The following error was encountered:
Unable to determine IP address from host name for bidev.nt_dolvi
The dnsserver returned:
Name Error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
amitHi Amit,
I guess you are trying to execute the query in the Browser.
In which case you need to talk to the basis and find out if the Ports are open and the required configuration to run in Browser is done.
Regards,
Tom. -
Dear All,
I am facing the problem in the query designer that when i edit any of the formula in the query it allows me but when i edit it second time , it wont allow me and throws a following exception...
"An unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will be shut down immediately.
Object reference not set to an instance of an object."
and in details of the exception the following comes...
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text
System.NullReferenceException: Object reference not set to an instance of an object.
at com.sap.bi.et.QueryDesigner.QDbPoolEditSelection.Get()
at com.sap.bi.et.QueryDesigner.QDbCommandEditElement.EditFormula(IQDView iSelectedView)
at com.sap.bi.et.QueryDesigner.QDbCommandEditElement.ExecuteCommand()
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.CommandExecute(QDbCommandBase iCommand)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.InitialCommandExecute(QDbCommandBase iCommand)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoExecuteCommandInternal()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.ItemClickedHandler(Object sender, BarItemClickedEventArgs args)
at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.MenuItemClickedHandler(Object iSender, BarItemClickedEventArgs iE)
at Syncfusion.Windows.Forms.Tools.XPMenus.BarManager.OnItemClicked(BarItemClickedEventArgs args)
at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs args)
at com.sap.bi.et.QueryDesigner.QDiBarItem.OnItemClicked(EventArgs args)
at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.ExecuteDoubleclickCommand(ParentBarItem iContextMenu)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.NodeDoubleClickHandler(Object sender, EventArgs e)
at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.ItemDoubleClickHandler(Object sender, EventArgs e)
at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.ItemDoubleClickHandler(Object sender, EventArgs e)
at com.sap.bi.et.QueryDesigner.QDuHeaderTree.OnItemDoubleClick(EventArgs iE)
at com.sap.bi.et.QueryDesigner.QDuHeaderTree.NodeDoubleClickHandler(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnDoubleClick(EventArgs e)
at Syncfusion.Windows.Forms.Tools.TreeViewAdv.OnDoubleClick(EventArgs e)
at com.sap.bi.et.QueryDesigner.QDiTree.OnDoubleClick(EventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at Syncfusion.Windows.Forms.ScrollControl.WmMouseUp(Message& msg)
at Syncfusion.Windows.Forms.ScrollControl.WndProc(Message& msg)
at Syncfusion.Windows.Forms.Tools.TreeViewAdv.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies
mscorlib
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
BExQueryDesignerStarter
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.486
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExQueryDesignerStarter.exe
System
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
BExQueryDesigner
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.486
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExQueryDesigner.DLL
BExCommon
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExCommon.DLL
BExControls
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExControls.DLL
BExCAControls
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExCAControls.DLL
System.Windows.Forms
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77a5c561934e089/system.windows.forms.dll
BExCommunication
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExCommunication.DLL
Microsoft.VisualBasic
Assembly Version: 7.0.5000.0
Win32 Version: 7.10.6001.4
CodeBase: file:///c:/windows/assembly/gac/microsoft.visualbasic/7.0.5000.0__b03f5f7f11d50a3a/microsoft.visualbasic.dll
System.Xml
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.xml/1.0.5000.0__b77a5c561934e089/system.xml.dll
8mfr2iet
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
SAP.Connector
Assembly Version: 2.0.0.0
Win32 Version: 2.0.0.23
CodeBase: file:///c:/windows/assembly/gac/sap.connector/2.0.0.0__50436dca5c7f7d23/sap.connector.dll
Interop.SAPLogonCtrl
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Interop.SAPLogonCtrl.DLL
SAP.Connector.Rfc
Assembly Version: 2.0.0.0
Win32 Version: 2.0.0.23
CodeBase: file:///c:/windows/assembly/gac/sap.connector.rfc/2.0.0.0__50436dca5c7f7d23/sap.connector.rfc.dll
BExGeneratedAll
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.123
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExGeneratedAll.DLL
System.Web.Services
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.web.services/1.0.5000.0__b03f5f7f11d50a3a/system.web.services.dll
System.Drawing
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f11d50a3a/system.drawing.dll
System.Web
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system.web/1.0.5000.0__b03f5f7f11d50a3a/system.web.dll
nwibr-hj
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
orv3kyon
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
3wroaodz
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
uzyztof1
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
bmpxtf3w
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
BExControls2
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.123
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExControls2.DLL
BExSharedImageList
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExSharedImageList.DLL
System.Runtime.Serialization.Formatters.Soap
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.runtime.serialization.formatters.soap/1.0.5000.0__b03f5f7f11d50a3a/system.runtime.serialization.formatters.soap.dll
BExSelectorAPI
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.202
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExSelectorAPI.DLL
System.Data
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.data/1.0.5000.0__b77a5c561934e089/system.data.dll
BExOpenSaveServices
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.108
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExOpenSaveServices.DLL
Syncfusion.Tools.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Tools.Windows.DLL
Syncfusion.Shared.Base
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Shared.Base.DLL
Syncfusion.Grid.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Grid.Windows.DLL
Syncfusion.Core
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Core.DLL
Syncfusion.Grid.Base
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Grid.Base.DLL
Syncfusion.Shared.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Shared.Windows.DLL
Accessibility
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///c:/windows/assembly/gac/accessibility/1.0.5000.0__b03f5f7f11d50a3a/accessibility.dll
AxInterop.SHDocVw
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/AxInterop.SHDocVw.DLL
Interop.SHDocVw
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Interop.SHDocVw.DLL
Syncfusion.Edit.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Edit.Windows.DLL
ezadp-o7
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
czxpebds
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
ws48wlef
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
nbphnkyi
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
qmxat26w
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
BExFormulaParser
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExFormulaParser.DLL
RegexAssembly140_0
Assembly Version: 0.0.0.0
Win32 Version: n/a
CodeBase:
System.Design
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.design/1.0.5000.0__b03f5f7f11d50a3a/system.design.dll
BExQueryDesignerFormulaParser
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.2
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExQueryDesignerFormulaParser.DLL
JIT Debugging **************
To enable just in time (JIT) debugging, the config file for this
application or machine (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the machine
rather than being handled by this dialog.
Please anybody help me.
NiteshHi,
This is a typical front end issue where you have to look at your GUI patch and front end patch.I recommend you deinstalling your frontend installation as follows:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -
'REMOVE SAP FRONTEND'
- Install the newest frontend and GUI patch and check the installation with sapbexc.xla
Please run the front-end checktool SAPBEXC.XLA as per Note 918394 and ensure there are no errors.
Path for frontend patches
Please goto
-> service.sap.com/patches
->entry by application group
->SAP Frontend Components
->SAP GUI FOR WINDOWS
->SAP GUI FOR WINDOWS 6.40
->SAP GUI FOR WINDOWS 6.40
->Win32
->Apply latest frontend patch
Once the installation is done run the installation check file as per note 918394 and ensure that there are no red flags.
Rgds
Manoj Kumar -
Pb with language logon and data display Query designer
Hello,
I do the translations (FR => EN) via RSA1 and SE63 of my variables of my Query for the query designer.
It works I have no technical name that appears in the query designer.
But when I run my query using the query designer, the query is displayed in French while I am logged in English.
I want the query is displayed in english when I'm logged into English.
How can I do?
Thank you pour votre aide.
Edited by: KhalidTaibi on Jul 6, 2010 6:31 PMHello,
Per I can understand, you are executing the query from Query Designer.
So, if you are using Query designer 7.0, you are calling the Enterprise Portal.
Even with English on Query Designer, you have to logon as english on the
Portal, as well.
Try to check your Browser configuration.
On Internet Explorer:
Tools
Internet Option
Language
Check if English is configured as the first language.
Also, ensure the query1s objects exists on english version.
Best regards,
Edward John -
BEx Query Designer - Url openining problem
Dear All,
While running a BI query through BEx Query Designer, it is generating portal URL as:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZTEST_Q0001&VARIABLE_SCREEN=X&DUMMY=20
have created source system and all RFCs required as running properly.
Any ideas further please ??
my usage type is as below
Active Usage Types
Product Name UT Code Short Name Description Activation Date Configured
SAP NetWeaver 2004s BI BI Java BI Java Mon Aug 11 00:00:00 IST 2008 YES
SAP NetWeaver 2004s AS AS Java Application Server Java Mon Aug 11 00:00:00 IST 2008 YES
SAP NetWeaver 2004s EPC EP Core Enterprise Portal Core Components Mon Aug 11 00:00:00 IST 2008 YES
SAP NetWeaver 2004s EP EP Enterprise Portal Mon Aug 11 00:00:00 IST 2008 NO
SAP NetWeaver 2004s AAS AS ABAP Application Server ABAP Mon Aug 11 00:00:00 IST 2008 YES
Please correct me where to configure default host name
Regards,
Ravi ghangurdeDear all.
Below are the details probelm .
i want to open the portal nwa using url "http://10.2.202.154:50000/nwa" but it's ask me username and password screen , when entering J2EE_ADMIN user and correct password next screen is not appears
and same user name and password screen shows again.
when putting worng password it's show authontication fail message.
Below are url details after providig the correct password.
http://10.2.202.154:50000/logon/logonServlet?redirectURL=%2Fwebdynpro%
2Fdispatcher%2Fsap.com%2Ftc%7Elm%7Ewebadmin%7Emainframe%7Ewd%
2FWebAdminApp
in morning it was showing the nwa screen when loginig with path
http://10.2.202.154:50000/nwa and j2ee_admin and password
but we are only change sso tiket parameters in default profile and create tiket in visual administrator.
after than i am not able to open the portal NWA
i want to run post installation wizard for BI post installation please suggest to open the NWA.
is any other way for BI post installation wizard
Regards,
Ravi Ghangurde -
BEx Query Designer problem when generate URL to IE
Hello everyone,
When I click the "Execute" button to run a query in Query Designer , it pop-up a IE windows with URL:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSALESREP01&VARIABLE_SCREEN=X&DUMMY=1
And IE display that "The address is not valid".
I think the reason is that there are some configuration not do.
Could any guys tell me what configuration should be done ?
Thank you!
BR,
LouisHi,
I think the Bex service is not confirgured correctly in your system.
For the WEB functionality to work corectly in your BW system there are several configurations that should be done. They are the Host name, listening ports, Protocols and the ICF service should be maintained & activated. The transactions involved are SMICM and SICF where you can check for these settings...
Refer to the hot to document on SDN:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Which gives the complete step by step instructions. check these settings in your system and contact your basis or portal team to configure them correctly.
Regards,Shilpa -
Enabling the Reporting Tools WAD, BEX Query Designer in BI 7.0
Hi friends,
Recently we installed BI 7.0 system with SP 13 and now we want to connect to the reporting tools WAD, BEX Query designer, When I am selecting the BI system and after entering the login details we are encountering a error msg" connection to the gate way is failed".
If any one has a solution please post a reply.
Regards,
shahidhi,
I am getting the error msg after running the wad application as no BI server is existing.
I hope that the wad and the BI system is not configured properly or connected to each other.
If any documents please forward me.
Regards,
shahid -
Change query in Ad-hoc Query Designer
Hello All,
We are using Ad-hoc Query Designer for users to run their reports. now we want them to do their modifications there itself and save as the query. But SAVE and SAVE AS buttons are Inactive.
One more problem with using Ad-hoc Query Designer is when we run reports and want to save the Bookmark, this function is not working (though the Bookmark button is Active).
It would be helpful if you could pinpoint the settings/configurations that I would need to check to get above two things working.
Thanks and Best regards
Pratap SoneIf you want users to enter the data , you can create a transactional cube andmake the query input ready .
-
Query Designer, Execute fails with missing iView (Portal Runtime Error)
Hi,
I have followed all steps to integrate Sap NetWeaver 2004s BI into EP. Checks done so far indicate that all is well between the EP and BI. From within the EP, I can execute the Bex Web Analyser iView and from there I can execute a query on the BI backend. From the BI backend, executing the function module RSWR_RFC_SERVICE_TEST returns the 'BI test service' success message. SSO is working fine as no user/passwords were prompted for. From the trace file, I can see no errors appear but I do see authentication success messages. So far, so good
But, when I execute a query from within the Query Designer, it calls the browser and then errors with the following error:
<b><i>Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 10:06_03/03/06_0012_26285450
See the details for the exception ID in the log file</i></b>
Looking at the trace file, all it tells me is the same, that this iView is not found.
If I logon to the portal and have a look at the iViews within the 'platform-add-ons/bi' folder, I can see the following 4 iViews:
BEx Broadcaster (com.sap.ip.bi.bexbroadcaster)
BEx Portfolio (com.sap.ip.bi.bexportfolio)
BEx Web Analyser (com.sap.ip.bi.bexwebanalyzer)
My Portfolio (com.sap.ip.bi.myportfolio)
I cannot find the missing iView (com.sap.ip.bi.bex).
Any ideas/suggestions would be appreciated.
Thanks in advance.Hi Ashish,
Thanks for the suggestions. Here is what happened:
1. I have run the deploy and change template again (BIPostInstall). Step 10 failed but I am not too concerned as it does appear that SSO is working both directions. Also, step 13 failed which is the 'Configure Repository Manager'. The error I got here was USER_AUTH_FAILED: User account for logonid "" not found. I am not sure where it is getting the blank userid from.
2. The 'com.sap.ip.bi.business_explorer_showcase' role suggestion looked very promising. I found some doco on it and it does mention this role and when assigned, then you see the Business Explorer tab. I assigned it to all users and to all groups. When I went back into the portal, sure enough, the Business Explorer tab was visible. From within there, I could run query which all worked fine.
BUT, when executing a query from within the BEx Query Designer, I still got the same error:
<i><b>Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:25_05/03/06_0003_26285450
See the details for the exception ID in the log file</b></i>
Do you know if this is an actual iView that should exist in the portal content ? If you have this working, can you see this iView in the portal?
3. I had a look at this note (872043) but I could not get the sap download manager to work to get the zip files attached to the note download. If you have it still, could you email it to me ([email protected]) and I will try that. Did you apply the zip file?
I can't find any further trace information on why this missing iView error is happening. I've amended the severity level on the areas which a SAP note detailed but the only information I get is that a missing iView was called.
Function module RSWR_RFC_SERVICE_TEST still works fine and I can execute a query from the Web BEx Analyser iView.
I just can't execute a query from the BEx query designer due to the missing iView.
I don't know whether it is a communication problem even though SSO both directions seem to work OR whether I do have some content missing from my portal.
Regards -
BEX - Query Designer - Query Execution - IE "The page cannot be displayed'
Hi ALL,
Trying to execute a query from BEx Query Designer, result needs to be displayed on Internet Explorer.
However, when IE pops up to show the result, it says 'The page cannot be displayed'.
It seems the PORT Number is wrong.
When I execute the RSPLAN the port number is 52300 (23 ASCS) (and it works!!).
For this web query the port in URL is 55300 (53 SCS).
Could you help to configure the right port?
Something needs to be done on Basis side configurations?
Thank you,
NiviaHi,
This especific problem was solved na SM30 programa RSPOR_T_PORTAL.
But I still have problem:
The PORTAL logon is displayed and after input the user and pass shows the 500 Internal Error.
Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
Connect_PM TYPE=B MSHOST=calsaps011.net.bradesco.com.br GROUP=PUBLIC R3NAME=BWH MSSERV=sapmsBWH PCS=1
ERROR partner 'calsaps011.net.bradesco.com.br:sapmsBWH' not reached
I have looked the services and hosts and the files has the sapgw<> and sapms<> right configured.
The important detail is that The PORTAL works if it doesn't come from BEx.
COULD SOMEONE HELP ME?
Tks,
Nivia -
BEx Query Designer - Execute pops up blank Internet Explorer session
Hi gurus,
From BEx Query Designer, I choose Execute, and it pops up a blank Internet Explorer window rather than the query. It says about:blank in the URL and the page is white.
I read some posts that say to run RSPOR_SETUP, but I don't have a Java system or Portal system so does that still apply to me? I want the URL that pops up to point to the BW system which is an ABAP system.
E_URL_PREFIX http://BWSAPF00.mydomain.com:8100
E_URL_PATH /sap/bw/BEx
E_URL_PROTOCOL http
E_URL_SERVER BWSAPF00.mydomain.com
E_URL_PORT 8100
E_SUBRC 0
Warm Regards,
CMHi,
Please note that Java stack is mandatory for running Queries in web side
or for executing the Queries using Transaction RSRT -> Java Web or
for executing the Queries using Query Designer in Release 7.x .
So, please install Java stack and use BI Java components for running
Queries in web side here.
Also, please refer the following note for details:
917950 - SAP NetWeaver 2004s: Setting Up BEx Web
Also keep a note of the following:
Please check the following link:
http://help.sap.com/saphelp_nwpi71
/helpdata/en/45/61d5aaa0546628e10000000a1553f6/frameset.htm
"With SAP NetWeaver 7.1, the Visual Administrator (VA) is replaced by
the SAP NetWeaver Administrator, that is, all relevant functions of
the VA are available in the SAP NetWeaver Administrator.
The VA is no longer delivered as of SAP NetWeaver 7.1. "
The interface is a little bit different now, but the installation
steps still follow the same logic as SAP NetWeaver 2004s.
You can use manual steps to set up integration as per note 917950.
Also, please don´t use report RSPOR_SETUP for configuration check
between ABAP and Java for SAP NetWeaver 2004s.
The report has been replaced by the support desk tool.
Please have a look at note '937697 - Usage of
SAP NetWeaver BI Diagnostics & Support Desk Tool'
RSPOR_SETUP is obsolete in BI 7.x release and Supportdesk tool should
be used in 7.x release.
Also refer the following notes:
1512988 - Frequently Asked Questions:BI Java 7.30 SP's/patches
1512356 - Patches for NetWeaver 7.30 BI Java Support Package
1506722 - Generic Note for BI Java Patches and Support Packages
And, please note that Patch Level 0 is not supported for BI Java components as per the following note:
1789842 - Patch Level 0 for BI Java Installation
Please do look at the note 1789842 for details.
Please check the Support Desk Tool as per the note 937697 and if you find
any RED signals in the file systeminfo.txt included in the file
supportdesk.zip, please correct it as per the Solution mentioned
there and check if it helps.
Thanks & Regards,
Sapna
Message was edited by: Sapna J Gurudutt -
IP - Aggregation Level not showing in Query Designer as infoprovider
Hi guys
I just started implementing Integragted Planning at a new client. I created an aggregation level to build my input ready query. However this aggregation level is not available as an inprovider in the Query Designer nor is it available under the infocube in RSA1 on which the aggregation has been defined.
Any suggestions?
Thanks for your help.
Ameya KulkarniHi Mayank
Good point. But I could not see the aggregation level whatsoever in RSA1. The aggregation level is consistent and activated but does not show in the query designer.
I was wondering if there is some configuration that I have to do to get the aggregation level available in the query desginer.
Please let me know.
Thanks,
Ameya Kulkarni
Maybe you are looking for
-
How to setup bypass the apps is not working
i am go to setting and then i am set contact and teset add update this is called bypass but how to fix it apps is not working please
-
My iPad won't charge. I have tried more than one cable, adapter, and outlet. I have to wiggle the part of the wire where it connects to the actually device and find the perfect position to put the iPad in and now it isn't working
-
Hi there, I want to create some screens that dont have a fixed duration, as I want my learners to explore several 'click to reveal' interactions (eg 4 pictures (buttons) appear) and user can click each picture to reveal some text and pictures, then
-
Calling Oracle Stored Procedure from Weblogic.
Hi All, I am using Oracle 11g R2 and weblogic 10.3.5.0 Do you know if it is possible to call a stored procedure from Weblogic. Basically, what I would like to do is to call the following procedure : EXEC DBMS_SESSION.SET_IDENTIFIER('provider_a') when
-
How to assign automatically system id in Quality Server (portal - transport
In the development environment we have ECC and CRM/EP server and in Quality we have only one server ECC/EP. Portal is working fine in development server(CRM). I have imported transport package from Development Server to Quality server successfully us