Query Display

Hi all
Some how, every time i run my query I'm getting the TTITLE values being displayed twice.
I have turned almost everything off as far as I know
TTITLE OFF
BTITLE OFF
CLEAR BREAKS
CLEAR COLUMNS
CLEAR COMPUTES
SET FEEDBACK OFF
SET TERMOUT OFF
SET ECHO OFF
SET HEADING OFF
TTITLE CENTER 'HECS:Higher Education Cafetaria Service' SKIP 1 -
       CENTER 'Restaurant and Bar' SKIP 2 -
       RIGHT 'Date: ' current_dateVar SKIP 1 -
       LEFT 'Member Name:     :' NameVar SKIP 1 -
       LEFT 'Institution:      ' InstitutionVar SKIP 2
[pre]
But nothing.
[pre]
                                HECS:Higher Education Cafetaria Service
                                         Restaurant and Bar
                                                                               Date: 24TH APRIL 2006
Member Name:     :GUMMO MARX
Institution:      NHMC
                               HECS:Higher Education Cafetaria Service
                                         Restaurant and Bar
                                                                               Date: 24TH APRIL 2006
Member Name:     :GUMMO MARX
Institution:      NHMC
Date            Menu Item                      Meal Type       Unit Price   Quantity Item Total
25/DEC/05       MINERAL WATER                  SOFT DRINK           $2.90          1      $2.90
31/DEC/05       COFFEE                         SOFT DRINK           $2.90          2      $5.80
31/DEC/05       COKE                           SOFT DRINK           $2.90          2      $5.80
31/DEC/05       PAVLOVA                        DESSERT             $10.50          4     $42.00
                                                                                   9     $56.50
[pre]
I'd like only want to have
[pre]
                              HECS:Higher Education Cafetaria Service
                                         Restaurant and Bar
                                                                               Date: 24TH APRIL 2006
Member Name:     :GUMMO MARX
Institution:      NHMC
Date            Menu Item                      Meal Type       Unit Price   Quantity Item Total
25/DEC/05       MINERAL WATER                  SOFT DRINK           $2.90          1      $2.90
31/DEC/05       COFFEE                         SOFT DRINK           $2.90          2      $5.80
31/DEC/05       COKE                           SOFT DRINK           $2.90          2      $5.80
31/DEC/05       PAVLOVA                        DESSERT             $10.50          4     $42.00
                                                                                   9     $56.50
[pre]
Does anyone knows why??
Thanx

Hi,
Try your script after giving the following command.
REPHEADER OFF
Regards,
Sailaja

Similar Messages

Getting a early watch alert in production for query display.

Hi All,
Getting a early watch alert in production for query display.
Number of Excel cells send to frontend: 78630 cells to the frontend on average.
Please suggest to overcome and rectify in the production environment.
Regards,
Siddhardh

Siddhard,
To set u201CAverage number of Excel Cells send to Frontendu201D to remove/ extend the set 30000 as parameter
We need to execute the report SAP_RSADMIN_MAINTAIN with parameters
o OBJECT = MPRO_MAX_RESULT
o VALUE = <maximum size of the interim result in kilobytes>
Reference: Note # 630500
Hope this helps.
-RajNi Reddy

Authorization Object for role creation for query display?

Hi,
Can Anybody here tell me what is the Authorization object that we use for role creation for query display?
I want to assign a role to the newly designed query! that query does not have any role so far!
Pls suggest me
Thanks,
Ravi

Hi,
I could make the authorization tab green by entering the authorization object!
But user tab still remains red as it is not allowing me to enter my username in the user tab!
in the user tab i am unable to enter my user name?
Any suggestions?
Thanks,
Ravi

Master data query display limited to 10000 records

Hi,
When I run a query based on master data objects like 0CUSTOMER, the query displays only 10000 records instead of about 50000. This happens with all other master data items. This happens after the upgrade to 2004S. We still use frontend 3.5. Transaction data displays are correct. Has anybody faced this problem? Can someone suggest the solution for this?
Thanks.
Param

Hi
Check out note -
<b>955487</b>- Master data InfoProvider reads only 10000 records
Implement the advanced corrections as SP-09 is too far to be released.
Hope it Helps.
Chetan
@CP..

Error in Query display

Hi All
I am using 0Instl_dur for calculating installation duration. Its flaoting point number tyoe infoobject. However when I display this in query in BEx. the Duration is shown with suffix ERR. e.g. duration 5,0000000000000000E+00 ( 5days) is being shown as 5.0 ERR.
Can I anyone explain me what needs to be done to get rid of unnecessary charecters 'ERR'?
Cheers
PB

Hi PB,
to come around the 'ERR' you can do 3 things. First one is already suggested by Michael. Just create a new formula or a calculated keyfigure to get your keyfigure without a unit --> nodim(keyfigure)
Second is: put the unit infoobject into the rows of your query.
Third is: Reload your cube completely and make sure the unit is populated correctly.
regards
Siggi
Message was edited by: Siegfried Szameitat

Frontend Query display in Analyzer taking more time

Hi ,
We have severe performance issue with one of Query .
We are using several Hierarchy nodes in query , we have lot of customer exits and query is built on virtual Provider. All these performance issues cannot be ruled out as user is insisting to have them . I tried all suggestions posted in SDN before i am posting this message.
My query is executing fine in RSRT it takes approximately 2 minutes to execute in RSRT , However when i try to execute the same query in Analyzer it takes more than 20 min and work book built on the same query is still worst , It takes 1 hours to display the result.
Kindly suggest me to over come this issue.
Thanks in Advance
Anil

Hi Anil
Please find the link https://www.sdn.sap.com/irj/scn/advancedsearch?query=query+performance&cat=sdn_all . It contains various document for query performance and sap notes. Hope this helps.
Also try to restrict your query with variable to improve the performance.
Cheers

IF NEW VARIABLE IN SQL QUERY, DISPLAYS AS LAST COLUMN + rpad not working

Hello everybody and thank you in advance,
1) if I add a new variable to my sql query to select a column which was already in the table, it shows it in the report table as the Last column to the right. That is, if I add "street" to
something like city, postcode, street, store, manager, etc, instead of placing street between postcode and store, it places it as i said as the last column to the right.
2) When values are entered into the cells of the tables, yes, they do expand it to their needed lenght, But, only if it is one word. If it is two, like when i enter the value "very good"
then it takes two lines so as with a carriage return within the cell, thus, making it too high the row. I tried to padd spaces with rpad but it did not work. something like rpad(stock, 20,' ')
I must say that the table is in the same page where there is a Form, so as the table grows in lenth it is actually squeezing the form located right on its left.
3) rpad did not work with the most simple syntax, but less would with what i need because it turns out i am using DECODE in order to do a conversion between value displayed and
value returned in my select list of values, something like : DECODE (TO_CHAR (stock),'1','Deficient','2','Average','3','Good','4','Very Good',null) AS stock,
so, i have tried to put the rpad there in several places but either it gave parsing error or it left the column empty not picking any values.
thank you very much
Alvaro

Alvaro
1) That is standard behaviour of apex builder. You can change the display order with the arrows in the report attributes column report.
2) You will have to play with the style attributes of the column to accomplice this. For instance style="white-space:pre;" in the Element Attributes of the column attributes. White-space:normal would thread several space (' ') as 1. So no matter how many you add with rpad they will be shown as 1.
Or set a width either as attibute or in a style class for that column.
Nicolette

How to Hide Unit Currency in Query Display

Hi to all,
I have created Query for Receivables .
wheher i am using 0FI_AR_4 as datasource and 0CREDIT_LC as Credit amount in local currency and using 0CREDIT_LC at query level as Key Figure.
Now when i display Query in RSRT or PORTAL , 0CREDIT_LC is display with Unit Currency.
example      ;
                             2100 INR              3500 INR         2300 INR
I need that only value should display not Unit Currency at query level.
example      ;
                             2100             3500         2300
Please can nay one help we with that.
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi,
Please create a calculated key figure and use the function NODIM
so you have will have a new calculated key figure = NODIM ( cube key figures)
Note - this will be fixed for this query.. you will not be able to change it at the report level... units can only be seen if you remove the NODIM

In query display sales negative values

Hi Friends
Iam Exicuting query based on these selection parameters
Sales Org: 5360
cal Month/Year: 04.2007 to 04.2008
When am exucuting the query above parameters some values display negative values like
04.2007 month display -39
07.2007 month display -253
the key-fig is sales turnover Qty display negative values
in BW side cube also display negative values
why display the negative values
anybody help me

Check the Source where data is coming if it is negative value. If source has positive value, in Cube also it should be positive.
Whatever value you have in your infoprovider, it will display in query.

Character in chart of bw query display error in web browser

our system is unicode system,default language is chiniese(ZH)
our IGS patch level is 11
system basis release is 700 patch 13,and BW patch level is 15
everything is ok
but when we execute the query in WEB browser,the chart display error like the image below:
[http://www.xhschool.com:82/yuuki/viva/zh.jpg|http://www.xhschool.com:82/yuuki/viva/zh.jpg]
the text of kpi in the chart display error as the squares.
how can i make it correct?

Hi,
you have to download and install igshelper.sar as described in note 1028690.
Regards, Kai

Problem in Ad Hoc Query displaying Personnel Number field

Hello,
while creating a query through transaction S_ph0_48000510 I select for display the field "Personnel Number". However while running the query , in the results part , under the field "Personnel Number" , instead of the personnel number , the employee name is displayed.
How can it be ?
I appreciate your help,
thanks,
Mazal

Hi
I think there must be the further selection field in the screen from that you can choose personal number .
Manoj Shakya.
<b>Reminder : Points should be given on answers.</b>

Query displaying wrong results

Hi
I have developed a query, in dev and transported to quality.
everything worked fine in dev, after transport to quality, the query output is displaying data incorrectly
for one particular infoobject. value is fourtimes the original value in the cube.
Ex. cube has output for x field as 2.5
query has the output as 15.0. This behaviour is observed only in quality after transport.
Dev query is still working fine.
I think even retransport would not solve the issue, since Dev is fine.
Plz suggest,
Regards

Dear Sanju,
Iu2019m going to try helping you regarding your question,
Something, when you usually transport a query, something lose a variable, or structure, or calculate key figure, or restrict key figure. I suggest you; check all of component of query in development and quality system, through BEx Query Designer.
Be sure, that the data that you try to display isnu2019t impact be reporting authorization.
Compare the date in InfoProviders in both system development and quality system, through Tcode LISTCUBE.
Try to execute the query through Tcode RSUDO for check some authorization behavior, see the log through Tcode RSECPROT.
I hope this suggestion can help you to answer your question,
Luis

SAP Query: Display Selection Fields in the header page of Basic list

Hello,
I have to display the selection fields in the header page of the basic list and statistics
in a SAP Query.
I know the usage of short names for fields in the header page, but this doesn't work
for the selection fields.
How can I display the selection fields in header pages?
Kind regards
Thomas

Try using:
DATA: wa_lstab TYPE line
READ LINE sy-index line value INTO wa_lstab
Thanks,
SKJ

ABAP Query display variant problem

Hi,
We have three different SAP clients development DV1, Staging ST1 and production PC1. I have created an abap query for which I m trying to create a global display variant (not user specific). I m able to do so easily in DV1 and PC1 systems. But when I try to create a display variant on ST1 by first running the report and then going to menu Settings->Layout->Save . I find that by default the User-Specific checkbox is selected and disabled. Because of this I can create only user specific display variants for my queries.
Where can I change the settings so that when I go to the above menu the User-specific checkbox is enabled and I m able to create global display variants ?
Thank you for reading.
Krishna

I am confuse after reading your question , any way we can adding "default" variant in SQ01. You can also assign the same variant in SE93 , when you create T-code for the specific query !!.
Well if it doesnt solve your problem ..please explain your question with the help of tr. codes and what youre trying to do !!
Im sorry , its really making me knutt by reading your question again and again .
Thanks
Saquib
Message was edited by: Saquib Khan

Change default query display settings (show more cells)

Hello Friends!
I have a little issue with default display settings in the Bex Query Designer.
Can I change the display settings like in an analyses item e.g. more Number of Data Columns Displayed at once?
Thank you for your help
Best regards
Florian

You can also look at the following thread -
show more than 5 column in web analyzer

SAP Query Display data from 2 internal tables

Hi ABAP Gurus,
I am developing a SAP Query.
I have created an infoset with the custom infotype 9050 and added the table ZPA9050 into the Infoset.
How do I input values to the ZPA9050 fields? A checkbox for making a Selection field is not available in the Query (SQ01)
For every pa9050 entry there exist multiple records of ZPA9050. I need to display the pa9050 fields in the 1st row and the corresponding zpa9050 fields in the subsequent rows.
Kindly advise how to accomplish this task.
A quick reply is highly appreciated.
Useful answers will be rewarded.
Thanks
Sriram

Hi Deepika,
Your reqirement is to print data from the two internal tables ..and if u r not using interactive alv then u need to merge data into single internal table... if anycase u dont want to merge in the table itab as u told u can use another final internal table in which u can merge data from the two previous interal tables then u pass this final internal table to ur FM.
Thanks & Regards
Ashu Singh

Query Display

Similar Messages

Maybe you are looking for