Query on configuration objects

For a synchronous scenario Java Proxy <->XI<->RFC ,
how many reciever agreements & reciever determinations are required?
Currently I have defined reciever agreement & reciever determination with source system as the Java proxy system and target as the R/3 system where the RFC executes. The communication works successfully half way but while returning the response back to the calling application, an error occurs saying
Received XI System Error. ErrorCode: CO_TXT_OUTBINDING_NOT_FOUND ErrorText: ErrorStack: No receiver agreement found for sender - X to receiver -Y,http://myinterfacenamespace
where X is the R/3 system and Y is the Java proxy.
Regards,
Amol

Hi Amol,
how many reciever agreements & reciever determinations are required?
>>> It should be one Receiver Agreement and one Receiver Determination. Anyway there is no BPM also.
The error , I am not sure. Try to redoing the Configuration and activate it. Hope the message is not very huge.
Thanks,
Moorthy

Similar Messages

How do I query changed view object attribute in another view object

Jdeveloper 10.1.3.4
My requirement is that I want to be able to query a view object (based on entity) on a non-key attribute where the value I am searching on may either be in the database on an existing record or, have just been recorded by updating a different view object based on the same entity (and yet to be committed).
When querying the second view object for a value just updated via a different view object, the second view object always returns no rows. I had expected the process to be :
EntityA
ViewObjectA based on EntityA
ViewObjectB based on EntityA
ViewObjectA - query row with key = 123. update attribute Y with value 456 (attribute Y in database null). Entity cache for EntityA, key 123, atttribute Y updated with value 456
ViewObjectB - query row with attribute = Y. expect record in EntityA cache just updated to be returned. Instead, nothing is returned
Here is the code I was using (where RandScheduleEdit and RandScheduleSearch are identical view objects based on entity object RandSchedule)
public static void main(String[] args) {
    String        amDef = "test.cache.model.AppModule";
    String        config = "AppModuleLocal";
    ApplicationModule am = Configuration.createRootApplicationModule(amDef,config);
    ViewObject rsEdit = am.findViewObject("RandScheduleEdit");
    Key rsKey = new Key(new Object[]{40});
    Row[] rsEditRows = rsEdit.findByKey(rsKey,1);
    Row rsEditRow = rsEditRows[0];
    rsEditRow.setAttribute("SId", new Number(7827));
    ViewObject rsSearch = am.findViewObject("RandScheduleSearch");
    rsSearch.setWhereClause("S_ID = :SId");
    rsSearch.defineNamedWhereClauseParam("SId", null, null);
    rsSearch.setNamedWhereClauseParam("SId",new Number(7827));
    rsSearch.executeQuery();
    Row rsSearchRow = rsSearch.first();
    Configuration.releaseRootApplicationModule(am, true);
}Why does rsSearch not find the record S_ID = 7827 ? It seems to only be querying new records in the database and ignoring the cached record just updated ?
Any help greatly appreciated.
Cheers,
Brent

rsSearch.setNamedWhereClauseParam("SId",new Number(7827));This might help:
rsSearch.setQueryMode(ViewObject.QUERY_MODE_SCAN_ENTITY_ROWS);
rsSearch.executeQuery();

Delay when querying from CUBE_TABLE object, what is it?

Hi Guys,
We are using Oracle OLAP 11.2.0.2.0 with an 11g Cube, 7 Dimensions, Compressed and partitioned by Month.
We have run into a performance issue when implementing OBIEE.
The main issue we have is a delay while drilling on a hierarchy. Users have been waiting 7-12 seconds per drill on a hierarchy, and the query is only returning a few cells of data. We have managed to isolate this to slow performing queries on CUBE_TABLE.
For example, the following query returns one cell of data:
SELECT FINSTMNT_VIEW.BASE, FINSTMNT_VIEW.REPORT_TYPE, FINSTMNT_VIEW.COMPANY, FINSTMNT_VIEW.SCENARIO, FINSTMNT_VIEW.PRODUCT, FINSTMNT_VIEW.ACCOUNT, FINSTMNT_VIEW.SITE, FINSTMNT_VIEW.TIME
FROM "SCHEMA1".FINSTMNT_VIEW FINSTMNT_VIEW
WHERE
FINSTMNT_VIEW.REPORT_TYPE IN ('MTD' )
AND FINSTMNT_VIEW.COMPANY IN ('E01' )
AND FINSTMNT_VIEW.SCENARIO IN ('ACTUAL' )
AND FINSTMNT_VIEW.PRODUCT IN ('PT' )
AND FINSTMNT_VIEW.ACCOUNT IN ('APBIT' )
AND FINSTMNT_VIEW.SITE IN ('C010885' )
AND FINSTMNT_VIEW.TIME IN ('JUN11' ) ;
1 Row selected in 4.524 Seconds
Note: FINSTMNT_VIEW is the automatically generated cube view.
CREATE OR REPLACE FORCE VIEW "SCHEMA1"."FINSTMNT_VIEW" ("BASE","REPORT_TYPE", "COMPANY", "SCENARIO", "PRODUCT", "ACCOUNT", "SITE", "TIME")
AS
SELECT "BASE", "REPORT_TYPE", "COMPANY", "SCENARIO", "PRODUCT", "ACCOUNT", "SITE", "TIME"
FROM TABLE(CUBE_TABLE('"SCHEMA1"."FINSTMNT"') ) ;
If we increase the amount of data returned by adding to the query, it only increased the query time by .4 seconds
SELECT FINSTMNT_VIEW.BASE, FINSTMNT_VIEW.REPORT_TYPE, FINSTMNT_VIEW.COMPANY, FINSTMNT_VIEW.SCENARIO, FINSTMNT_VIEW.PRODUCT, FINSTMNT_VIEW.ACCOUNT, FINSTMNT_VIEW.SITE, FINSTMNT_VIEW.TIME
FROM "SCHEMA1".FINSTMNT_VIEW FINSTMNT_VIEW
WHERE
FINSTMNT_VIEW.REPORT_TYPE IN ('MTD' )
AND FINSTMNT_VIEW.COMPANY IN ('E01' )
AND FINSTMNT_VIEW.SCENARIO IN ('ACTUAL' )
AND FINSTMNT_VIEW.PRODUCT IN ('PT' )
AND FINSTMNT_VIEW.ACCOUNT IN ('APBIT' )
AND FINSTMNT_VIEW.SITE IN ('C010885', 'C010886', 'C010891', 'C010892', 'C010887', 'C010888', 'C010897', 'C010893', 'C010890', 'C010894', 'C010896', 'C010899' )
AND FINSTMNT_VIEW.TIME IN ('JUN11' ) ;
12 rows selected - In 4.977 Seconds
If we increase the data returned even more:
SELECT FINSTMNT_VIEW.BASE, FINSTMNT_VIEW.REPORT_TYPE, FINSTMNT_VIEW.COMPANY, FINSTMNT_VIEW.SCENARIO, FINSTMNT_VIEW.PRODUCT, FINSTMNT_VIEW.ACCOUNT, FINSTMNT_VIEW.SITE, FINSTMNT_VIEW.TIME
FROM "SCHEMA1".FINSTMNT_VIEW FINSTMNT_VIEW
WHERE
FINSTMNT_VIEW.REPORT_TYPE IN ('MTD' )
AND FINSTMNT_VIEW.COMPANY IN ('ET', 'E01', 'E02', 'E03', 'E04' )
AND FINSTMNT_VIEW.SCENARIO IN ('ACTUAL' )
AND FINSTMNT_VIEW.PRODUCT IN ('PT', 'P00' )
AND FINSTMNT_VIEW.ACCOUNT IN ('APBIT' )
AND FINSTMNT_VIEW.SITE IN ('C010885', 'C010886', 'C010891', 'C010892', 'C010887', 'C010888', 'C010897', 'C010893', 'C010890', 'C010894', 'C010896', 'C010899' )
AND FINSTMNT_VIEW.TIME IN ('JUN11', 'JUL11', 'AUG11', 'SEP11', 'OCT11', 'NOV11', 'DEC11', 'JAN12') ;
118 rows selected - In 14.213 Seconds
If we take the time for each query and divide by the number of rows, we can see that querying more data results in a much more efficient query:
Time/Rows returned:
1 Row - 4.524
12 Rows - 0.4147
118 Rows - 0.120449153
It seems like there is an initial delay of approx 4 seconds when querying the CUBE_TABLE object. Using AWM to query the same data using LIMIT and RPR is almost instantaneous...
Can anyone explain what this delay is, and if there is any way to optimise the query?
Could it be the AW getting attached before each query?
Big thanks to anyone that can help!

Thanks Nasar,
I have run a number of queries with logging enabled, the things you mentioned all look good:
Loop Optimization: GDILoopOpt     COMPLETED
Selection filter: FILTER_LIMITS_FAST     7
ROWS_FAILED_FILTER     0
ROWS_RETURNED     1
Predicates: 7 pruned out of 7 predicates
The longest action I have seen in the log is the PAGING operation... but I do not see this on all queries.
Time Total Time OPERATION
2.263     27.864          PAGING     DYN_PAGEPOOL     TRACE     GREW     9926KB to 59577KB
1.825     25.601          PAGING     DYN_PAGEPOOL     TRACE     GREW     8274KB to 49651KB
1.498     23.776          PAGING     DYN_PAGEPOOL     TRACE     GREW     6895KB to 41377KB
1.232     22.278          PAGING     DYN_PAGEPOOL     TRACE     GREW     5747KB to 34482KB
1.17     21.046          PAGING     DYN_PAGEPOOL     TRACE     GREW     4788KB to 28735KB
1.03     19.876          PAGING     DYN_PAGEPOOL     TRACE     GREW     3990KB to 23947KB
2.808     18.846          PAGING     DYN_PAGEPOOL     TRACE     GREW     3325KB to 19957KB
What is strange is that the cube operation log does not account for all of the query time. For example:
SELECT "BASE_LVL" FROM TABLE(CUBE_TABLE('"EXAMPLE"."FINSTMNT"'))
WHERE
"RPT_TYPE" = 'MTD' AND
"ENTITY" = 'ET' AND
"SCENARIO" = 'ACTUAL' AND
"PRODUCT" = 'PT' AND
"GL_ACCOUNT" = 'APBIT' AND
"CENTRE" = 'TOTAL' AND
"TIME" = 'YR09';
This query returns in 6.006 seconds using SQL Developer, if I then take the CUBE_OPERATION_LOG for this query and subtract the start time from the end time, I only get 1.67 seconds. This leaves 4.3 seconds unaccounted for... This is the same with the my other queries, see actual time and logged time below:
Query     Actual     Logged      Variance
S3     6.006     1.67     4.336
L1     18.128     13.776     4.352
S1     4.461     0.203     4.258
L2     4.696     0.39     4.306
S2     5.882     1.575     4.307
Any ideas on what this could be or how I can capture this 4.3 second overhead?
Your help has been greatly appreciated.

Is it possible the query in view object is dynamic?

Is it possible the query in view object is dynamic?
Generally, make the column list dynamic.
I think this is related to whether view object can be assembled at runtime based on a dynamic cursor in a procedure?
I ask this because I would like to know how we can use OA framework to simulate crosstab workbook in Discoverer?
Anybody has some clues, please advise.
Thanks.

Hi Shay,
Let me tell you briefly... I am sending input as customerId,customerNumber,CustomerName to the web service, if the record is available i am getting the response and i am displaying those records on page as a table. Now when i click a row i need to populate another table with all sale orders of that customer. From webservice datacontrol i have only customer object, I dont have Sales Order Object. For this i need master detail relation. In this case how to proceed. Thats why i am thinking to create a vO and EO object for sales orders table and i want to create view link for this sales order and customers. As i don't have customer VO and EO object to create view link.

Can multiple Powershell v4 DSC configuration objects be combined on a machine?

I'm working on configuring servers using Powershell Desired State Configuration (DSC). I have several different groups of IIS servers. The configuration for all of them is about 90% identical, but there are differences between the groups.
In order to follow good programming practices and re-use the common code, I attempted to use multiple configuration objects to configure the groups. There was one configuration object full of common configuration, and then each group had a configuration
object with group specific config. It looked something like this:
Configuration CommonConfiguration {
Node "IISServer1" {
#Common configuration settings go here, such as this one (to keep things brief, I'm only showing one setting... there would be many more):
WindowsFeature Role_Web_Server_IIS
Ensure = "Present"
Name = "Web-Server"
Configuration IISGroup1Configuration {
Node "IISServer1" {
#Configuration resources for group1 go here. Again, much shorter than real life.
WindowsFeature Feature_ASP_Dot_Net_4_5
Ensure = "Present"
Name = "Web-Asp-Net45"
To fully configure a server in my first group of IIS servers, I would need to use both these configuration objects by running them like this:
CommonConfiguration
IISGroup1Configuration
Start-DscConfiguration -Path ".\CommonConfiguration\"
Start-DscConfiguration -Path ".\IISGroup1Configuration\"
DSCConfiguration runs twice and starts two Powershell jobs, both of which seem to complete. But there is a problem, and I'm wondering if it is at all solvable.
Problem:
When I try to use other DSC cmdlets to control my server's configuration, such as Restore-DCSConfiguration or Get-DSCConfiguration, it only seems to work on what ever configuration object ran last. For example, Get-DSCConfiguration returns only the IISGroup1Configuration,
because that ran last. I've tried playing around with order, and whichever configuration I run last is what is returned. Similarly, if I were to try to keep my configuration enforced with restore-configuration, it's only going to work on IISGroup1Configuration,
because it ran last. This is an example of what I ran that returned only one of the configuration objects.
Get-DscConfiguration -CimSession "IISServer1"
The behavior I want is for the server to treat ever configuration block run on it as its configuration and return all of them. But since it doesn't, does this mean I have to have everything needed to configure a server in a single configuration block? For
example, if I wanted to use DSC to configure two groups of IIS servers, would I have to have the following?
Configuration Group1 {
Node "IISServer1" {
#---Common configuration, 90% the same---
#---Group 1 specifics----
Configuration Group2 {
Node "IISServer2" {
#---Common configuration copy pasted in, 90% the same---
#---Group 2 specifics----
If this is how I have to do things, and a node can have only one configuration block be its "configuration", then this is absolutely terrible from a code reuse perspective. If I have six groups of servers, and I want to edit some shared code, I'm
going to have to go into six groups of configuration objects and edit the same line six times. That leads to errors and makes a mess. Is there any way to avoid this, while have the server consider all configuration objects run against it to be part of
its configuration?

Hi AlgebraicMirror,
Sorry for the delay.
I am trying to involve someone familiar with this topic to further look at this issue.
There might be some time delay. Appreciate your patience.
If you have any feedback on our support,
please click here.
Best Regards,
Anna
TechNet Community Support

How to build sql query for view object at run time

Hi,
I have a LOV on my form that is created from a view object.
View object is read-only and is created from a SQL query.
SQL query consists of few input parameters and table joins.
My scenario is such that if input parameters are passed, i have to join extra tables, otherwise, only one table can fetch the results I need.
Can anyone please suggest, how I can solve this? I want to build the query for view object at run time based on the values passed to input parameters.
Thanks
Srikanth Addanki

As I understand you want to change the query at run time.
If this is what you want, you can use setQuery Method then use executeQuery.
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/oracle/jbo/server/ViewObjectImpl.html#setQuery_java_lang_String_

Problem when Activating Design-Configuration objects

Hi Everyone,
We are facing a strange error in our XI system. When we are trying to activate any design/configuration object, we get an error, which states:
ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.ResourceException
com.sap.aii.utilxi.swing.framework.PersistenceException: ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
<hostname>\sapmnt\<SYSID>\SYS\global\security\data\SecStore.properties" does not exist although it should
We double checked that the properties file does exist in the directory specified. We also went for a instance restart, but since then the SMC is showing a yellow flag with info 'J2EE Status Info Unavailable', and the java Stack is not working. Does anybody have any idea why this error is occuring?
Regards,
Amitabha

Hi Krishna,
As far as I know, this file is used for containing encrypted password and connection info for J2EE stack. So, I daresay, it will be very risky to remove the file from the source directory. Still, I would like to try your hint.
Regards,
Amitabha

Error in importing Configuration objects of PI 7.0 to PI 7.1

Hi All,
My server is upgraded from PI 7.0 to PI 7.1.
I am getting Error while importing Configuration objects of PI 7.0 to PI 7.1 now.
Pls see the below error
Attempt to access the 1 requested objects on 1 failed. Detailed information: com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Adapter Metadata Mail | http://sap.com/xi/XI/System, type AdapterMetaData from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Software component version with key ID: b38bcd00e47111d7afacde420a1145a5 not found
Pls suggest

Hi,
It seems that adapter metadata has not been loaded into integration repository and because of that when you are trying to import configuration objects in ID then you are getting the error.
The SAP adapter metadata objects are located under the namespace http://sap.com/xi/XI/System of software component SAP BASIS.
What you can do is, if you have installation dvd's then you can copy from their or you can simply [_DOWNLOAD_|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ] from sap market place (refer this [thread|how to import Adapter metadata;) (you must have S-user id for this) and then after you need to do as mentioned below...
1. First unzip the file (if it is zipped) and then put it in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
2. Now login to IR and then from menu TOOLS ---> Import design objects and import it.
3. After that in ID, Environment ---> Clear SLD Data Cache
4. Now you can try to import configuration objects...
Regards,
Sarvesh

Re-importing Configuration Objects

experts!
I have imported Configuration Objects from .tpz files in Integration Directory. Because of those objects where unable to activate, I did a reject change and all objects were gone. When I try re-import from the same .tpz file, it is not showing in the file list. The .tpz file is there in the import folder of directory.
Please help me to re-import objects from .tpz file.
thanks
nikhil

Hi,
Here we have to consider some points while Exporting & Importing the .tpz files.
1)Once you export that configuration objects, the tpz file will be created at Export DIR.
2)From there we have to copy that file into Import DIR.
3)Once You import the tpz file from Import DIR or faild to Import DIR means those files will be moved to Imported Files DIR.
4) Now if we are looking to import those again means , they will not be available to import in ID.
So we have to copy that file again from the Export DIR and Paste it inImport Folder
REgards
Seshagiri

22591 The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object. Ensure that the computer name is unique in the VMM environment, and then try again.

Hello everyone,
I recently bummed into an error message when I want to deploy a service template.
Setup:
1 HyperV server on win2k12 r2
1 SCCM VMM 2k12r2 on the hyperv server
1 template with all the objects in the library
Error:
When I deploy the the service template I get the below error message.
22591
The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object.
Ensure that the computer name is unique in the VMM environment, and then try again.
The issue is that I can't find it anywhere, not on my domain controller not on my dns server as a record and also not as a vm in sccm or in powershell when doing get-vm. So where do I need to remove it ( no it is not an option to create a new Hostname for
this service template ).
Andre

There could be a couple things happening.
One - you have a Service Template, it defines %Computername% as a variable. And you have deployed this Template once using 'foo' and you are deploying it again as 'foo' without deleting the previous instance.
Two - you hardcoded the computer name into the template.
Three - you are scaling out and you have hit the bug that the wizard does not increment the machinename if you have something like computername## where SCVMM should be incrementing the machine name.
Windows does not support identically named machines (you can't have two machines on the same network with the same computer name - they broadcast their name and the 'second' one shuts down its network stack). In support of this SCVMM also enforces
this rule.
And with any templates SCVMM is in charge of machine names at deployment.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

JPA query by entity/object ?

I am trying to write an abstract API which dynamically assigns any Entity Class that needs to be persisted and retrieved using the Entity Manager.
Saving into the database is not a problem, I just do entityManager.save(Class) and it works for any class that needs to be persisted.
However, when querying for the object based upon the attributes, I want to avoid naming particular attributes and want to use the Entity class's attributes against itself for querying.
For example, the client program will say something like this to query by name and age of a Person:
-------calling (client) program: ---
Person p = << get from UI, not saved yet, no Id but has all other attributes like name and age etc. >>
List<Person> persons = dao.getAllThatMatch(p);
--- end client Program --
--- DAO class ---
List<T> getAllThatMatch(T t) { //note that expectation is that returned is a list of Object which is the same as the querying object
List<T> entityList = em.someFinderMethod(t);
//the someFinderMethod method should automatically query for all Person objects that match the attributes provided by the object of Person supplied as criteria
//NOTE: there is no attribute mentioned extensively like name, age etc.
return entityList ;
-- end DAO class --
Edited by: user7626479 on Feb 6, 2013 3:55 PM
Edited by: user7626479 on Feb 6, 2013 3:55 PM

Query by example is not included in the JPA standard, but it is possible to do with EclipseLink.
See http://wiki.eclipse.org/EclipseLink/Examples/JPA/ORMQueries#Query_By_Example
for how to use query by example with native EclipseLink queries. To execute a native query through JPA, you will need to call createQuery(DatabaseQuery query) on the org.eclipse.persistence.jpa;JpaEntityManager obtained from the javax.persistence.EntityManager instance by calling getDelegate() or unwrap.
Best Regards,
Chris

Deleting an entry in an IDM Configuration Object

Does anyone know of a way using Express or Express/Java to delete an entry in an IDM configuration object (not the configuration object itself)? For example, if an IDM Configuration object has a Hashmap with 6 entries and we want to delete entry number 4, is there a way to do this? Thanks!

Hi Mohammed,
Are you really facing authorization issue or you mention to say that the delete option in grey out.
Generally, it won't allow you to delete the entries in TCOLL table.
Steps to delete entry in a table:
1.) First, you have to select the entry and press display.
2.) Enter in debugging mode by pressing /h.
3.) For code variable it will be CODE="show". Change show to DELE and press F8(Execute).
4.) Now the delete button will be enabled. After deleting, go out of T-code and again enter into SE16 and check the table TCOLL.
Regards
Sudhir Sadhu

Moving/Exporting Seeburger configurations/objects from QA to Production

Hi,
I need some expert advise in moving Seeburger configuration objects like splitter adapter,AS2 adapter configurations from QA to Prod.
Our scenario is like this , in the Seeburger message splitter we have defined the splitter adapter based on the AS2ID for different vendors/suppliers/customers. now when we go live on couple of customers every week, we are manually creating/configuring the seeburger channels in production. Is there a way to do it automatically like Exporting the objects in XI from QA to Prod???
Any help is much appreciated.
Thanks and Regards,
Preeti

Hi Preeti,
For moving the congiguration objects from quality to production, you need to configure transport groups in the SLD so that when you are moving configuration objects from quality to production it will take Production R/3 system.
For Transport Groups check the below links
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
But you need to manually change AS2ID and Partner Number according to production environment in the Party which you configured for each customer in the ID.
Regards,
Prakash

Problems with query in view object

I have create query form view object that is render on a jsp. The dynamic generate query leaves out "'" single quotes on string 'not assigned' which is selected from a lov.
Does anyone no how I might fix this?
Thanks.

Greg:
Please provide further details. How are you creating the dynamically generated query? Could you show the original query vs. what is executed?
Thanks.
Sung

Query Rewrite Configuration

Hi,
I have a confusion on the • Query Rewrite Configuration in OBIEE some one at workplace has raised a question on the configuration of Query rewrite in OBIEE
i think this is a feature of Oracle Database , but just wanted to know is there anything in OBIEE for Query Rewrite, other than the aggregate level setting.
Help appreciated

Query rewrite is handled by the Oracle RDBMS. You would just expose the MV/tables in your physical layer of RPD as per any regular table.
Paul

Query on configuration objects

Similar Messages

Maybe you are looking for