Query on step by step pulling of data

Hi friends,
We have a query where we need to know the steps by which data has to be pulled in the CRM system from R/3 system for replication.
Process I:
1. Firstly pull data of the sales area and sales offices and secondly the HR org structure for CRM Org model.
2. Firstly pull HR org structure for CRM Org model and then the sales area and sales office data
3. Both can be simultaneously
Please guide
Thanks
AJ

Hi,
please refer Building Block configuration guide "CRM Organizational Model (C01) ",
This document is available on help.sap.com and has mentioned all steps for org data replication from ECC to CRM.
Hope it helps,
reagards,
Prashant

Similar Messages

Example to help me see the steps in extracting data from IDES R3 to BW?

Hello folks,
I have some documents on extraction but I have not been able to step through successfully.
Can you step me through the process with a simple example:
1. identify an object(table?) on R3; provide typical tcode to see the data in this source
2. steps see the data in this R3 table
3. steps to create an extractor to pull the data we saw in step 2.
4. Steps to go through so that I can see this data in BW
I will appreciate a real example which will help clarify some difficulties I have in extracting data from R3 to BW.
Thanks

1. To see data in the extractor, activate the data sources first and then execute RSA3. For LO extractors, in addition to activating the data sources, fill the set up tables and set the delta process and then execute RSA3.
2. To view data in source tables, you must know the source tables. The best way to find out the source table from where the extractor picks up data, go to help;sap.com - BI content. In the help pages, you will find the source tablles. Once you get the source tables, go to Se16, type the table name and execute. You wil see the data.
3. If you wish to create extractor from the source table, go to RSO2 ( O as orange), choose which data source you wish to create ( master data, texts, hierarchies, transaction data). The steps are explained in the following document. Pl follow the link:
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044&_SCENARIO=01100035870000000202
Or send me a note to my email and I can send this document to you.
Ravi Thothadri
[email protected]

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
Pls explain me the steps for adding data from xml to B1 quotation step by step.
thanks and regards
Priya

Hi,
Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
Thanks,
Gordon

I tried restoring my iMac 27" slim. I followed the steps erased my data then to reinstall osx mavericks. Now that I'm trying to reinstall osx mavericks for whatever reason it doesn't completes. Can you help me out?

I tried restoring my iMac 27" slim. I followed the steps erased my data then to reinstall osx mavericks. Now that I'm trying to reinstall osx mavericks for whatever reason it doesn't completes. Can you help me out?

That's not quite the proper way as far as I can tell. Usually, one boots directly into the Recovery HD using COMMAND and R keys at startup. If you cannot do that then most likely there is a problem with the hard drive. Since this is a new computer i would make a Genius Appointment and take it in for service.

Steps to move Data and Log file for clustered SQL Server

Hi guys
we have Active'passive SQL 2008R2 cluster environment.
looking for steps to move Data and log files from user Database and System Database for SQL Server Clustered Instance.
Currently Data and log files resides on same drive for user and system Databases..
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach A.Shah

Try the below link
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/468de435-3432-45c2-a50b-23519cd2686e/moving-the-system-databases-in-a-sql-cluster?forum=sqldisasterrecovery
-Prashanth

Steps to extract data from teradata to bw

steps to extract data from teradata to bw

Thank you Roberto and Jerome!
1.as per my knowledge my client has teradata datawarehouse on oracle database is it possible. and also can he use cognos for reporting?
2. now teradata data can be only extracted to bw or also to r/3?
3.and after extracting the entire historic data where can i store?is it in 1infocube or store in different cubes related to modules?
if my questions are wrong please clarify them?

LSMW dump at step 11-Convert data

Hi Guys,
i uploaded some vendors using LSMW in my DEV System. For testing purposes in the test client,a project import from DEV into TST which went on well.Unfortunately at step 11-convert Data , it flagged an error and threw a dump.
The dump file is below.
Please does anyone have a clue
<removed by moderator>
Moderator message: please post only relevant parts of the dump, your posts must contain less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on Apr 6, 2011 12:40 PM

Hi Saravanan M,
I got some assistance that before step 110convert Data , i could generate my conversion program i which i have done.
the issue now is that i have an error at line 98: the error is 'ZFB60_NEW has already been declared'.
This is the generated conversion code
<removed by moderator>
Moderator message: please post only relevant code parts, your posts must contain less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on Apr 6, 2011 12:39 PM

Step wise config data for schedule line agreements

DEar All,
I need urgently one the foolowing doc:
step wise config data for schedule line agreements.
thanks
regards,
s KUMAR

Hi,
1) Scheduling Agreement is a long term agreement and PO is normally a one-off. When you have long term relation with supplier you will go with SA.
2) SA need not have delivery schedules at the time of ordering. It's like a contract with vendor for all basic prices, quantities & terms. You will release schedules as & when required. This method is very popular with manufacturing ind (e.g. automotive) where they negotiate prices but delivery schedules are given periodically based on their actual production/sales demands.
3) In a PO, you must give schedules in PO itself.
4) If you know contract & release order (or call-off) concept, then SA is like contract and SA schedule is like release order. PO is release order.
or
While using schedule agreement, you will create delivery schedule, when ever you require materials.
Firm and trade off zone in delivery schedule details will be forwarded to your vendor. you can create daily , weekly , monthly schedule lines
Example : if you have created a schedule agreement for product " A " for quantity 1000, and you require material of 100 nos in the first month, you can create schedule line for this 100 only and this will be transmitted to vendor( if you are using LPA you have to release schedule line). when ever you require further qty based on your requirement you will create another delivery schedule line, then it will be transmited to vendor.
In case of PO if you are ordering 1000 qty , you need to specify the delivery date in Purchase order it self, and all the dates are immediately transmited to vendor along with Purchase order.
For configuration steps please follow
http://help.sap.com/saphelp_47x200/helpdata/en/93/7439fb546011d1a7020000e829fd11/frameset.htm
Hope this will help.
Thanks,
Raja

Hi guru i want "lo-cockpit" in bw-3.5 steps to extract data mm-module

hi guru,
          can any one help me in sending the "lo-cockpit" from bw-3.5 steps to exctract data from mm-module with navigation steps with scenarios
so that it can help me
Thanks n Regards
srinivas

Hi,
I think below steps will help you.
LO Cockpit Step By Step
Here is LO Cockpit Step By Step
LO EXTRACTION
u2022     Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
SD Sales BW
Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
Select the fields of your choice and continue
Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
u2022     Next step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 u2013 Sales & Distribution) and Execute
u2022     Now, Fill the Setup tables
9). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Filling the Setup tables
vi. Application-Specific Setup of statistical data
vii. SD Sales Orders u2013 Perform Setup (T-Code OLI7BW)
Specify a Run Name and time and Date (put future date)
Execute
u2022     Check the data in Setup tables at RSA3
u2022     Replicate the DataSource
Use of setup tables:
You should fill the setup table in the R/3 system and extract the data to BW - the setup tables is in SBIW - after that you can do delta extractions by initialize the extractor.
Full loads are always taken from the setup tables
With Compliments by: Chits
Fast Links:
Get help for your SAP BW problems
Do you have a SAP BW Question?
SAP Books
SAP Business Warehouse, Functional, Basis Administration and ABAP Programming Reference Books
SAP BW Tips
SAP BW Tips and Business Information Warehouse Discussion Forum
Best regards,
SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com
All the site contents are Copyright © www.sap-img.com and the content authors. All rights reserved.
All product names are trademarks of their respective companies. The site www.sap-img.com is in no way affiliated with SAP AG.
Every effort is made to ensure the content integrity. Information used on this site is at your own risk.
The content on this site may not be reproduced or redistributed without the express written permission of
www.sap-img.com or the content authors.
2.
LO
LO Cockpit (Use transaction LBWE)
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken]
To understand LO extraction go through these weblogs by Roberto
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
step by step procedure
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
LO EXTRACTION
As a prerequisite first Go to RSA9 and transfer application component hierarcy node.Then transfer the required BC DS from RSA5.
http://help.sap.com/saphelp_nw04s/helpdata/en/b3/c30a0e9c44204eb596c6353c827d2e/frameset.htm
Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
SD Sales BW
Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
Select the fields of your choice and continue
Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
Next step is to Delete the setup tables
7). Go to Transaction SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (Transaction LBWG)
vi. Select the application (01 u2013 Sales & Distribution) and Execute
Now, Fill the Setup tables
9). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Filling the Setup tables
vi. Application-Specific Setup of statistical data
vii. SD Sales Orders u2013 Perform Setup (Transaction OLI7BW)
Specify a Run Name and time and Date (put future date)
Execute
Check the data in Setup tables at RSA3
Replicate the DataSource
and then follow the standard procedure.
Hope this help

LSMW-step 9 read data

Dear All,
Kindly find below image i am not able to execute step 9 read data in LSMW
Regards
Rajasekaran

Hi Raja,
Go to 'Maintain source fields' and check for the field for which you have set Type hexadecimal. Change it to C.
Thanks & Regards,
Ramagiri

I subscribed two weeks back and on the iTunes site Step 1 gathering data is still going on. Why is it taking so long?

I subscribed two weeks back and on the iTunes site Step 1 gathering data is still going on. Why is it taking so long?

I was also having this problem after having successfully used iTunes Match previously. The problem appears to be when there are two version of songs and one of them has the iCloud icon made using a dotted line. Here's what solved it for me:
1. Identify your duplicate files. I have a large library, so I elected to use Dupin Light (available on the Mac App store). I suppose I could have used iTunes duplicate finder too, but I prefer the flexibility of Dupin.
2. Once you have identified your duplicates, find them in iTunes. In my case Dupin identifed 50, from 19,000+ tracks, so for me it was not a large number to check manually.
3. When you find the duplicates, if one of them has the aforementioned dotted line iCloud icon, this is the one you need to delete. If you accidently delete the other version, you can always download it again if you have purchased it from iTunes. In any case, it seems to be the tracks with this icon that it is causing iTunes Match to stall, so you will need to delete all of these.
4. Once you have completed step 3, iTunes Match should not proceed and complete.

LKM step Load huge data very slow

Hi ALL,
when you try to load 4 million data from flat file to my oracle database.
it took me around 2.5 hours to finish the step 3 "LOAD DATA" which i thought odi will load data from flat file to C$ table.
it is anyway to speed it up?
I just chose the simple LKM FILE TO SQL option.
thanks
I Z

this is only the step 3 create temp table. it is nothing about the sql load yet.
create table <%=odiRef.getObjectName("T"+odiRef.getTableName("COLL_SHORT_NAME"),"W")%>
<%=odiRef.getSrcColList("","[COL_NAME] [DEST_CRE_DT]","[COL_NAME] [DEST_CRE_DT]",",\n","")%>
<%=odiRef.getUserExit("WORK_TABLE_OPTIONS")%>
this one will auto-generate the sqll like
create table ESBUSER.TC$_0TEST
ROW CODE VARCHAR2(1), --> this one is auto-generated by the above code. i have not way to change ROW CODE TO ROW_CODE.
B VARCHAR2(20),
C VARCHAR2(20),
D VARCHAR2(40)
i dont know why it will generate the ROW CODE......without the "_"...
please help
thanks
I Z

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

Connecting to SQl server ( MS acess front end) and pull the data into BI

Dear all,
i need to extract the data from SQl server ( MS acess front end) and pull the data into BI .
i need to know what are the steps need to follow on this..
can any one help me on this...!
Thanks,
Siva

Hi,
1. login to sql server u2013 with ur server credentials and connect.
2. select ur sql for ex: sap bw
3. Right click u2013 sapbw - task - export data From sql to excel I m exporting So give sql details
4. Destination u2013 select excel.. and browse where u want to save the fileu2026
5. give next
6. select from which table u want to export
7. click on next
8. click on finish
9. close
10. go to desktop and open the xyz.xls file
11. not make it as csv file and load the data to BI as a flat file
Hope it will help you.
Regards,

Dynamically built query on execution How to save the data in Object Type

Hi,
In pl/sql I am building and executing a query dynamically. How can I stored the output of the query in object type. I have defined the following object type and need to store the
output of the query in it. Here is the Object Type I have
CREATE OR REPLACE TYPE DEMO.FIRST_RECORDTYPE AS OBJECT(
pkid NUMBER,
pkname VARCHAR2(100);
pkcity VARCHAR2(100);
pkcounty VARCHAR2(100)
CREATE OR REPLACE TYPE DEMO.FIRST_RECORDTYPETAB AS TABLE OF FIRST_RECORDTYPE;Here is the query generated at runtime and is inside a LOOP
--I initialize my Object Type*
data := new FIRST_RECORDTYPETAB();
FOR some_cursor IN c_get_ids (username)
LOOP
x_context_count := x_context_count + 1;
-- here I build the query dynamically and the same query generated is
sql_query := 'SELECT pkid as pid ,pkname as pname,pkcity as pcity, pkcounty as pcounty FROM cities WHERE passed = <this value changes on every iteration of the cursor>'
-- and now I need to execute the above query but need to store the output
EXECUTE IMMEDIATE sql_query
INTO *<I need to save the out put in the Type I defined>*
END LOOP;
How can I save the output of the dynamically built query in the Object Type. As I am looping so the type can have several records.
Any help is appreciated.
Thanks

hai ,
solution for Dynamically built query on execution How to save the data in Object Type.
Step 1:(Object creation)
SQL> ED
Wrote file afiedt.buf
1 Create Or Replace Type contract_details As Object(
2 contract_number Varchar2(15),
3 contrcat_branch Varchar2(15)
4* );
SQL> /
Type created.
Step 2:(table creation with object)
SQL> Create Table contract_dtls(Id Number,contract contract_details)
2 /
Table created.
Step 3:(execution Of procedure to insert the dynamic ouput into object types):
Declare
LV_V_SQL_QUERY Varchar2(4000);
LV_N_CURSOR Integer;
LV_N_EXECUTE_CURSOR Integer;
LV_V_CONTRACT_BR Varchar2(15) := 'TNW'; -- change the branch name by making this as input parameter for a procedure or function
OV_V_CONTRACT_NUMBER Varchar2(15);
LV_V_CONTRACT_BRANCH Varchar2(15);
Begin
LV_V_SQL_QUERY := 'SELECT CONTRACT_NUMBER,CONTRACT_BRANCH FROM CC_CONTRACT_MASTER WHERE CONTRACT_BRANCH = '''||LV_V_CONTRACT_BR||'''';
LV_N_CURSOR := Dbms_Sql.open_Cursor;
Dbms_Sql.parse(LV_N_CURSOR,LV_V_SQL_QUERY,2);
Dbms_Sql.define_Column(LV_N_CURSOR,1,OV_V_CONTRACT_NUMBER,15);
Dbms_Sql.define_Column(LV_N_CURSOR,2,LV_V_CONTRACT_BRANCH,15);
LV_N_EXECUTE_CURSOR := Dbms_Sql.Execute(LV_N_CURSOR);
Loop
Exit When Dbms_Sql.fetch_Rows (LV_N_CURSOR)= 0;
Dbms_Sql.column_Value(LV_N_CURSOR,1,OV_V_CONTRACT_NUMBER);
Dbms_Sql.column_Value(LV_N_CURSOR,2,LV_V_CONTRACT_BRANCH);
Dbms_Output.put_Line('CONTRACT_BRANCH--'||LV_V_CONTRACT_BRANCH);
Dbms_Output.put_Line('CONTRACT_NUMBER--'||OV_V_CONTRACT_NUMBER);
INSERT INTO contract_dtls VALUES(1,CONTRACT_DETAILS(OV_V_CONTRACT_NUMBER,LV_V_CONTRACT_BRANCH));
End Loop;
Dbms_Sql.close_Cursor (LV_N_CURSOR);
COMMIT;
Exception
When Others Then
Dbms_Output.put_Line('SQLERRM--'||Sqlerrm);
Dbms_Output.put_Line('SQLERRM--'||Sqlcode);
End;
step 4:check the values are inseted in the object included table
SELECT * FROM contract_dtls;
Regards
C.karukkuvel

Query on step by step pulling of data

Similar Messages

Maybe you are looking for