Steps to extract data from teradata to bw
steps to extract data from teradata to bw
Thank you Roberto and Jerome!
1.as per my knowledge my client has teradata datawarehouse on oracle database is it possible. and also can he use cognos for reporting?
2. now teradata data can be only extracted to bw or also to r/3?
3.and after extracting the entire historic data where can i store?is it in 1infocube or store in different cubes related to modules?
if my questions are wrong please clarify them?
Similar Messages
-
Example to help me see the steps in extracting data from IDES R3 to BW?
Hello folks,
I have some documents on extraction but I have not been able to step through successfully.
Can you step me through the process with a simple example:
1. identify an object(table?) on R3; provide typical tcode to see the data in this source
2. steps see the data in this R3 table
3. steps to create an extractor to pull the data we saw in step 2.
4. Steps to go through so that I can see this data in BW
I will appreciate a real example which will help clarify some difficulties I have in extracting data from R3 to BW.
Thanks1. To see data in the extractor, activate the data sources first and then execute RSA3. For LO extractors, in addition to activating the data sources, fill the set up tables and set the delta process and then execute RSA3.
2. To view data in source tables, you must know the source tables. The best way to find out the source table from where the extractor picks up data, go to help;sap.com - BI content. In the help pages, you will find the source tablles. Once you get the source tables, go to Se16, type the table name and execute. You wil see the data.
3. If you wish to create extractor from the source table, go to RSO2 ( O as orange), choose which data source you wish to create ( master data, texts, hierarchies, transaction data). The steps are explained in the following document. Pl follow the link:
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044&_SCENARIO=01100035870000000202
Or send me a note to my email and I can send this document to you.
Ravi Thothadri
[email protected] -
Steps to Extract data from Source System
Hi,
I want to use business content object 0PA_C01. I have implemented it in the SAP BW system wanted to know how t=do I extract the data from R/3 system now to the cube. I am new to extraction so kindly help me out in this.
Thanks.Hi SAPBILearner,
Genric Extraction Steps:
1) In R/3 side Create a Data source by use of RSO2 tcode
Select datasource type here, Give datasource name click create button
2) Specify description
Specify your table name
Choose the Application Component(like SD, MM, PP)
Click SAVE it takes to next screen
3) Choose the fields for visible and hidden
SAVE it.
Your datasource has been created
4) In RSA3 (Extract Checker) you can check your datasource it contains data or not
IN BW SIDE
1) First Replicate your datasource
2) Create InfoArea--> Info objects and all
3) Create InfoSource and assign this R/3 Datasource
4) Create info package to load data.
LO EXTRACTION STEPS
===================
1) In R/3 side, First delete the setup table (LBWG)
2) RSA5 --> transfer datasource
3) RSA6 --> Verify transferred datasource available or not
4) LBWE --> Maintain datasource
5) OLI*BW --> Fill setup table
6) RSA3 --> Extract checker
In BW side
1) Replicate datasorce
2) Asssign Infosource , activate datasource
3) Create infopackage to load data
Thanks
Mrityunjay -
How to extract data from generic view and function module
hi experts,
can anybody give me the steps to extract data from generic view and functon modules.
thanks and regards
venkathttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
https://websmp103.sap-ag.de/~sapidb/011000358700007535452002
Hope it Helps
Chetan
@CP.. -
Regarding extract data from r/3 to BW3.5
Hi,
Before i extracted data from flat file to BW.
Now i am extracting data from r/3 to bw.This is the first time to extract.
Please give steps to extract data from r/3 to bw using LO's and please give some directions for generic also.
Please do the needful for me.
ThanksHi,
<b>For LO:</b>
Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
Also refer to the weblogs by Roberto:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
other doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Bye
Dinesh -
Extracting data from Z-table from SAP R/3 to BW
Hi all
I want to extract data from a Z-table from SAP R/3 system to Bw system. Currently I am on BW 3.5. Since it is a Z table I dont have a standard extractor for it & I dont knw how to create it. Can anyone provide me with the step-by-step documentation of how to extract data from a non standard SAP table????Hi
You need to create Generic Datasource on the Z-Table you want to get data from
Go to RSO2 transaction to create generic datasource .
You need to give technical name of datasource under datasource type you want and click on create. Then you can give descrption and Application component under which u want see the datasource,
enter the z table name under view/ table and save.
here you can click on check boxes to make fields hidden or selection fields.
Regards
Ravi
Edited by: Ravi Naalla on Aug 25, 2009 8:24 AM -
Generate Insert Statement Script to Extract Data from Table in Oracle 7i
Hi all, I have an old Oracle legacy system that is running for over 15 years.Every now and then we need to extract data from this table@ ORacle 7i to be imported back to Oracle 10G.
My thoughts are to create a script of Insert statements in oracle 7 and that to be deployed back to Oracle 10G.
I found this scripts in Google and not sure how exactly this works.Any explanation on thsi scripts , would be greatly appreciated.I find this scripst may help to generate a set of insert statements from that table to the latest table at 10G.
<pre>
-- Step 1: Create this procedure:
create or replace Function ExtractData(v_table_name varchar2) return varchar2 As
b_found boolean:=false;
v_tempa varchar2(8000);
v_tempb varchar2(8000);
v_tempc varchar2(255);
begin
for tab_rec in (select table_name from user_tables where table_name=upper(v_table_name))
loop
b_found:=true;
v_tempa:='select ''insert into '||tab_rec.table_name||' (';
for col_rec in (select * from user_tab_columns
where
table_name=tab_rec.table_name
order by
column_id)
loop
if col_rec.column_id=1 then
v_tempa:=v_tempa||'''||chr(10)||''';
else
v_tempa:=v_tempa||',''||chr(10)||''';
v_tempb:=v_tempb||',''||chr(10)||''';
end if;
v_tempa:=v_tempa||col_rec.column_name;
if instr(col_rec.data_type,'CHAR') > 0 then
v_tempc:='''''''''||'||col_rec.column_name||'||''''''''';
elsif instr(col_rec.data_type,'DATE') > 0 then
v_tempc:='''to_date(''''''||to_char('||col_rec.column_name||',''mm/dd/yyyy hh24:mi'')||'''''',''''mm/dd/yyyy hh24:mi'''')''';
else
v_tempc:=col_rec.column_name;
end if;
v_tempb:=v_tempb||'''||decode('||col_rec.column_name||',Null,''Null'','||v_tempc||')||''';
end loop;
v_tempa:=v_tempa||') values ('||v_tempb||');'' from '||tab_rec.table_name||';';
end loop;
if Not b_found then
v_tempa:='-- Table '||v_table_name||' not found';
else
v_tempa:=v_tempa||chr(10)||'select ''-- commit;'' from dual;';
end if;
return v_tempa;
end;
show errors
-- STEP 2: Run the following code to extract the data.
set head off
set pages 0
set trims on
set lines 2000
set feed off
set echo off
var retline varchar2(4000)
spool c:\t1.sql
select 'set echo off' from dual;
select 'spool c:\recreatedata.sql' from dual;
select 'select ''-- This data was extracted on ''||to_char(sysdate,''mm/dd/yyyy hh24:mi'') from dual;' from dual;
-- Repeat the following two lines as many times as tables you want to extract
exec :retline:=ExtractData('dept');
print :retline;
exec :retline:=ExtractData('emp');
print :retline;
select 'spool off' from dual;
spool off
@c:\t1
-- STEP3: Run the spooled output c:\recreatedata.sql to recreate data.
Source:http://www.idevelopment.info/data/Oracle/DBA_tips/PL_SQL/PLSQL_5.shtml
</pre>Thanks Justin.
I get what you are saying,i really wanted to see the output of the codes, because the furtherst i could get from that code is
SELECT EXTRACTDATA('MYTABLE') FROM MYTABLE;
and it generated this:
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
I was expecting a string of
insert into mytable values (19/1/2009,1,1);
insert into mytable values (19/10/2008,5,10);
Thanks for the explanation . -
How to extract data from a remote system
Hi,
I want to extract data from another system and map it with a target table in my local machine. what is the procedure to do that?
I tried to create another module specifying location of that remote system I could extract the table but when I am mapping with the target table I am getting this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_LOCATION_UBN_15
ORA-00604: error occurred at recursive SQL level 1
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from UBNDW@ORACLE_LOCATION_UBN_15
here ORACLE_LOCATION_UBN_15 is the location and UBNDW is the SID for that system
SCOTT is the username I have provided while creating the module
Please help me out with this..
ThanksHi Roberto,
thank you for the fast answer. I have read this before but i don't understand the needed steps on the Oracle-System.
Hope anyone can help me...
Thanks
Muammer
Message was edited by:
Muammer Kizilaslan -
How to extract data from BCS consolidation cube to Group BW extraction cube
Gurus,
I have to figure out a way to extract data from a local BCS consolidation totals cube to a group BW extraction cube via a virtual cube in between the too...How can i do the extraction and what are the different ways in which it can be done..
Detailed steps would be appreciated....also how shud i proceed towards this...
Thanks
Cheers:
SamHi Sam,
Instead of extracting you can also consider reporting on the data with a multiprovider.
There is a doc here that might be useful
http://www.affine.co.uk/files/How%20to%20Create%20a%20MultiProvider%20over%20BW%20and%20BCS.pdf
Kevin -
How to extract data from ODS to non-SAP system
Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
EllaElla,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps -
Use ODI to Extract Data from Hyperion Planning & Budgeting report to Excel
Hello
Can someone tell me please how to Extract Data from (Financial Reporting in) Hyperion Planning & Budgeting into Excel Using ODI?
Would the steps be the same as Creating an ODI Project and Interface: Exporting a Flat File to a Flat File? If not, why?
Best Regards.
Edited by: Saturday on May 26, 2012 9:55 PMWhere do you think the financial reports get their data from? Financial Reports pull data from data sources such as Essbase, HFM.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error while extracting data from essbase
Hi All,
Now I'm tring to extract data from essbase by ODI, and at the sametime, I need to do some transformations, such as join with other relational tables or flat files to get more information about metadata. But unfortunately, once I add join into the interface, an error occurs. And it works fine if I extract directly (with no joins).
Is there any other way except using staging table? Our data vloume is large, using staging table will waste lots of storages.
The messages as below.
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: ODI Hyperion Essbase Adapter Version 9.3.1.1
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: Connecting to Essbase application [CORPPROD] on [172.18.93.150]:[1423] using username [admin].
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Successfully connected to the Essbase application.
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_FILE = D:\ODI_ESS_QUERIES\QUERY.TXT
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_TYPE = ReportScript
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_CALCULATION_SCRIPT = null
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXT_COL_DELIMITER =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option POST_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option ABORT_ON_PRE_MAXL_ERROR = true
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: inside getAppData()
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: Got Source Metadata
2011-07-12 23:34:01,119 ERROR [DwgCmdExecutionThread:null:49]: The number of columns returned by script [13] is less than the source data columns exposed [14]
com.hyperion.odi.essbase.ODIEssbaseException: The number of columns returned by script [13] is less than the source data columns exposed [14]
at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.validateColumns(Unknown Source)
at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.init(Unknown Source)
at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
at sun.reflect.GeneratedMethodAccessor769.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx85.f$0(<string>:1)
at org.python.pycode._pyx85.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.g.A(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
2011-07-12 23:34:01,119 INFO [DwgCmdExecutionThread:null:49]: Logging out and disconnecting from the essbase application.
From the working steps, I found a redundant column (Entity) was added while creating work table. Is it the reason?
create table HYP.C$_0CUX_ABC_HYP_INTERFACE
C14_HSP_RATES VARCHAR2(80) NULL,
C3_ACCOUNT VARCHAR2(80) NULL,
C10_PERIOD VARCHAR2(80) NULL,
C7_SCENARIO VARCHAR2(80) NULL,
C9_CURRENCY VARCHAR2(80) NULL,
C15_YEAR VARCHAR2(80) NULL,
C6_DATATYPE VARCHAR2(80) NULL,
C2_VERSION VARCHAR2(80) NULL,
C1_CATEGORY VARCHAR2(80) NULL,
C12_ENTITY VARCHAR2(80) NULL,
C13_ENTITY VARCHAR2(80) NULL,
C11_DEPARTMENT VARCHAR2(80) NULL,
C8_PROJECT VARCHAR2(80) NULL,
C5_DATA NUMBER(18,8) NULL
Appriciated!Extract the essbase data to a staging area and then do the transformations in another interface.
The adaptor needs to extract the data first.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error while extracting data from CRM
Dear all,
I have used some standard and generic datasources to extract data from CRM. These were working fine for more than a year and are scheduled in Process chains. For the past few days I am getting Caller 09 error as shown below, only for the generic datasources. I have checked the connection,replicated the datasources and activated them, reinitialized and have tried all the solutions that were posted earlier, but still the process chain fails. When I execute the process chain for generic datasources manually, it is working fine.
When I tried in RSA3 for both standard and generic datasources in CRM with update mode D, I get a message 'Error occured during the extraction',
Kindly suggest what can be the problem.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks all in advance.
Regards
Adhira AnandHi Meyappan,
I have checked SM37, SM21 and ST22. There are no errors.
in SM37 the below log is displayed.
Job started
Step 001 started (program SBIE0001, variant &0000000005420, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZCRM_SRV_DEFECT
RLOGSYS = CLNT645BIP
REQUNR = REQU_4JHQ8HH6KA40JHC1TYLYIV2W2
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 2000000000 *
abap/heap_area_total.......... 2000000000 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 6500000 *
ztta/roll_extension........... 2000000000 *
1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
IDOC: Info IDoc 2, IDoc No. 101415, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:39, End = 13.10.2010 22:51:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 101416, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:42, End = 13.10.2010 22:51:42
Job finished -
Extract data from R/3 using RFC
Hi!
Can any one tell me can I extract data from R/3 to BW usinf an RFC. My project has an implementation of RFC to bring the data from R/3 to BW and execute some functions on it.
Please let me know what are the steps to create RFC to extract data from R/3 (If possible)!
Regards,
Sri HarshaHi,
Check the below threads.
Unable to fetch data from R/3
Problem in extracting data from R/3 to BI 7.0
Extraction from R3 table to BW
RFC to file scenario
Regards,
Maha -
Steps to send data from BI 7.0 to PI in XML format...
Hello everybody,
Can somebody share any direct link to a document or thread where I can find step by step details as to how to send data from BI 7.0 to PI in XML format?
I extracted data from ODS objects into CSV files through Open Hub Destination before, but need to know how to send same ODS data from BI to PI in XML format...
Thanks in advance.
~S.H.just an idea:
Maybe one way could be creating xml data via simple transformation or standard transformation in sap bw. After maybe there could create an inbound message in xi for getting the data.
I never done it, but I thought this could be a practice?
Hope there will be better comments for that problem, soon!
Maybe you are looking for
-
I'll have 2 or 3 or more copies of the same email come in....same # and same time. If I delete one of the extras ALL of them end up in the Trash. So I have to go back to Trash and drag one of them back to the Inbox. Anyone know what could have Mail d
-
Weblogic to JBoss Migration Steps Needed
Hi, I am migrating from Web-logic 10.0 to JBoss 6.0. What are the migration steps I need to take care? Any links is highly appreciated. I am looking at the following points:- Code Organization Deployment Descriptors Security JNDI (DataSource, JMS, et
-
Hi, We have, on default views, defined view links based on the associations between EOs. More spesific views extend these default views and use the view links extensively. The problem is that we need the rows retrieved through the VL to be in a speci
-
Example: OO Dynamic data into table2 from corresponding fields in table1
<b>*Parameter definition (copied from public section!)</b> class-methods TAB1_TO_TAB2 importing !TAB1 type ANY TABLE !METH type BOOLEAN default 'C' !REF2 type BOOLEAN default 'X' exporting !TAB2 type ANY TABLE . <b>*
-
Hi, I have to insert in a database a lot of images, documents, audio and video files, (2G/mounth) My database should keep this entire files and any time to have the possibility to recover the information in case of disaster. If I will use bfile filed