Query ordering options

I don't know if someone has already suggested this, what do you think about adding some sorting capabilities to queries? Like ordering the list by size, by name, by date...
Maybe it's possible with some Bash scripting, but would be faster if done inside pacman.

Hi,
I hope this request is related to BIW and nothing to achieve with the security/authorizations.
Please post it in the appropriate group.
Warm Regards,
Raghu

Similar Messages

  • Is there a photobook ordering option in iPhoto '11 vers. 9.1.5 (615)?

    A friend of mine made a photobook with her Mac. I'd like to do the same. The instructions I've found on the web don't match the menu items in my iMac (vers. 10.7.3). Anybody know what I should do?
    Matthew

    Your question makes not sense
    Is it
    Is there a photobook ordering option in iPhoto '11 vers. 9.1.5 (615)?
    Then the answer is yes
    AS to what your friend did - with no information no one can tell you if you can do the same
    and as to ordering with a different version (since 9.1.5 does not run under OS X 10.7.3 which you say you have) then no one can answer unless you tell us wha tyou actually have
    And not that there are 5 or 6 versions of Iphoto that run under OS X 10.7.3 so once again for an answer you actually have to provide information
    So the answer to your headline question is yes and to your continued rambleing is who knows - not enough information to answer
    LN

  • Input Readiness of Query with optional variables

    Hi,
    I built one input ready query which is input ready upon execution with only one set of selections, for any other set of selections, it is not input ready.Query is built on aggregation level on the top of multiprovider. There are no data slices built, No lock entries in RSPLSE as well. Is it like if a variable in the selection screen of the query is optional, will it be moved to free characteristic and because of that input readiness of the query will disappear?? In my case, country is authorized variable which is optional. Please let me know if any one has solution for this.
    Thanks,
    Bindu

    Hi,
    Check if:
    1. You have added characteristic InfoProvider in filter area and restricted that to your plan cube?
    2. Any Keyfigure in query will have input-ready cell only if all the characterictics in the aggregation level of that query has unique values for that cell.
    In your case you have moved Country to free characteristic area and might have not provided any value for it as it's optional. So system is not finding a unique value for this characteristic for input-ready cells.
    Enter value for Country variable and then execute, query will be input-ready.
    Regards,
    Deepti

  • Sort Order option disabled when using OBIEE analysis?

    Hi everyone
    I've build a BIP report using the online layout editor.  My data model is based on an existing OBIEE analysis. When I go into the data model and go into the properties of a column, the Sort Order option is somehow defaulted to "No Ordering" and the dropdown menu is actually disabled, so I can't change anything.  Is this normal/expected functionality or am I missing something somewhere?
    Thanks

    I don't think it is possible. Here are the sort statements in this program.
    <u>Without Serialization</u>
    sort t_idoc_control_r
      by sndprn sndprt sndpfc mestyp
         mescod mesfct test serial.
    <u>With Serialization</u>
    sort t_idoc_control_s
      by sndprt sndprn obj_type chnum chcou.
    In neither of them, the document number is used. There is no guarantee that they will be processed in the document number order, even if serialization is used.
    Regards,
    Srinivas

  • How do I access specified order options programmatically?

    Using the RAS SDK (or any other .NET API), is it possible to access the specified order options of a group? I am talking about the named groups with specified conditions.
    I have found nothing when searching through the documentation, but maybe I am overlooking something. I know this used to be possible with the crpe32.dll - is it no longer possible?
    Thanks in advance!

    Hello, John;
    You can access the GroupOptions throught .NET RAS. Here is a link to the Developer Library section on groups:
    http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/RAS_SDK/rassdk_net_doc/doc/rassdk_net_doc/html/raslrfCrystalDecisionsReportAppServerDataDefModelGroupClass_MembersTopic.htm
    There is a sample of Group and Group sort code in the "VB .NET How To Samples" at:
    http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/RAS_SDK/sampleList.htm
    Elaine

  • 11g OLAP cube MV's   with Query Rewrite option

    Hi All,
    I am trying to test the 11g OLAP cube MV's with the Query Rewrite option.
    I had created a cube on the schema OLAPTRAIN problem by oracle. I an selected necessary options in 'Materialized Views' tab of the Cube definition in AWM. here is the screenshot
    !http://i40.tinypic.com/9jzpte.png!
    and then I try to run the SQL query
    select SUM(S.QUANTITY) AS QUAN,
    SUM(S.SALES) AS SALES,
    T.CALENDAR_YEAR_NAME,
    P.DEPARTMENT_NAME,
    C.COUNTRY_NAME
    FROM
    TIMES T,CUSTOMERS C,PRODUCTS P, SALES_FACT S
    WHERE
    C.CUSTOMER_KEY = S.CUSTOMER AND
    T.DAY_KEY = S.DAY_KEY AND
    P.ITEM_KEY = S.PRODUCT
    group by T.CALENDAR_YEAR_NAME, P.DEPARTMENT_NAME, C.COUNTRY_NAME;
    and observed the Explain plan, it is not using OLAP cube built, instead it is using the relational tables given in the above sql query.
    Also, i have observed that , though enabling or disabling of the Query Rewrite option doesn't make any change in the Explain query for the above query.
    alter materialized view olaptrain.cb$sales_cube enable query rewrite;
    alter materialized view OLAPTRAIN.cb$sales_cube disable query rewrite;
    No idea why is this Query Rewrite feature is not working on my Database instance of 11g R2 . Do am I missing any steps that has be taken care of , to make this working. Any inputs would be appreciated.
    Thanks
    S

    Hi there,
    You should check out Note 577293.1 on Metalink - 'Oracle OLAP 11g: How to ensure use of Cube Materialized Views/Query Rewrite'
    Thanks,
    Stuart Bunby
    OLAP Blog: http://oracleOLAP.blogspot.com
    OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
    OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
    DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

  • How to activate "Issue Purchase Orders" option ?

    Hello everybody,
    How can I activate the "Issue Purchase Orders" option ?  At this moment, every time a purchaser creates a PO in Sourcing Cockpit, the PO is created and sent it immediately to the vendor.
    Obviously, I want to change that.. =)
    Somebody knows how can I change this behavior and activate the "issue purchase order" option?
    Thank you very much for your help !
    Diego

    Hello Diego,
    this is exactly what I already told you in my first reply.
    With this customizing option, a PO "trigger" (term used in Post Processing Framework --> term used in output logic !!) is created but not processed immediatly.
    You can find this "waiting" output in transaction "Issue purchase order" and execute it, or let a scheduled report do it.
    When you save the PO in ECS, FM BBP_PROCDOC_SAVE will call this output creation, then level one update tasks are called (physical update of DB) by the COMMIT. Then level 2 update tasks are called. The PO transfer to the backend is one of those last calls.
    So there is no link between PO output and BE transfer.
    Except in case of DUMP, I don't see any reason to block the PO transfer because of PO edition.
    If your PO is not transfered in BE, this is not because of the PO output.
    There is another reason.
    Check PO status : is it "In transfer to exec" or "transfer to exec failed" ?
    Rgds
    Christophe

  • Where is the "Manage Pre-Orders" option?

    Where is the "Manage Pre-Orders" option?

    OK, so only if you have Pre-Orders you will see the option. I thought I have some but I guess I don't.
    Thanks.

  • Purchase Order segment field is enabled even though Split Purchase Order option is disabled

    Hi,
    In Purchase Order top right side, next to Document Number field, there is a Segment field. My understanding was that it comes only if Split Purchase Order setting is enabled in Per Document Settings.
    But in my Per Document Settings for PO, the Split Purchase Order option is disabled; still it is showing the Segment field. How can I get rid of this?
    Thanks.

    HI Rajesh,
    SAP B1 have common Split PO settings in Document settings.
    If we enable Split PO option in Document settings, then in Logistics tab of Purchase order screen Split PO will be enabled for all purchase orders.
    If we don't enable Split PO option in Document settings, still we have option to enable only for specific purchase orders before we adding the document.
    If Split PO option is "unticked" in Purchase order> Logistics tab, then  it wont allow multiple warehouse in single PO.
    Thanks
    Unnikrishnan

  • Remote Query execution option

    Hello Experts,
    I have installed and configured Intercompany 2.0 for testing, during which I could not find remote query execution option which was there in earlier version.
    Is there any setting to be done to enable this feature in new version.
    Thanks
    Deepak

    Hi Deepak,
    To access the Remote query execution feature of Intercompany, you are required to enable the SAP B1 user for the same. Follow the steps below to enable Intercompany solution Remote Query Execution feature:
    Log in SAP B1, navigate to Administration--> Setup--> Users and search the user.
    On Users-Setup screen, select Can Use Remote Query Execution check box and choose Update button.
      3. Now, using this user, login SAP B1 and open Query Manager window.
    4. Now on Query Manager window; Select a query, choose either of following options and execute          the query:
         Local: To execute and pull data from the logged in company.
         ALL   : To execute and pull data from all intercompany configured companies.
         Selection: To execute and pull data from a selected set of intercompany configured companies.
    Refer to Intercompany Integration Solution User Guide for further information related to Remote query execution.
    Regards,
    Agneesh Jain
    SAP Intercompany Team

  • Printing page order options: meanings? differences?

    In the print dialog box, under page order, there are 3 options.
    Automatic (default)
    Normal
    Reverse
    What is the meaning of Automatic?
    If I am doing double sided large document printing on a non duplex printer I would first print the odd numbered pages in the Normal page order.
    Next with the odd page stack back in the paper tray I would print the even pages in the Reverse order. This works for an even number of total pages, but not for an odd number of total pages, page 2 would end up on the back of page 3, not back of page one.
    Will the Automatic page order option solve this problem by automatically inserting a blank page as the first page of the even side page printing when the total page count is odd?
    Does this Q make any sense?

    The "Automatic(default)" refers to what is specified in the printer's PPD file. That may be either page 1 first (usually Normal) or page 1 last (usually Reverse). It may vary from printer to printer or from driver to driver. For example, my Epson Stylus Photo 1280 will print page 1 first when I use the Epson drivers when I use Automatic. If I use the Gutenprint drivers, it will print the last page first if I use Automatic.
    If you are doing a lot of manual duplex printing, you might want to take a look at CocoaBooklet _http://www.iconus.ch/fabien/products/cbeng/cbeng.html_. It can simplify matters greatly.
    Matt

  • SPARQL query with OPTIONAL

    Hi,
    When I run a SPARQL query with OPTIONAL in the WHERE clause, I saw a lot of "select 1 from ***" kind of queries got executed. The query runs very slow. I'm running Jena adaptor 2 against Oracle 11.1.0.6. We have about half million triples in the model. The queries we need to run tend to be complex and they run pretty slow. Does Oracle 11.1.0.7 have big query performance improvement over 11.1.0.6? Is there anything that we can do on the application side or on the database side to boost the query performance? Thanks,
    Weihua

    Native database support for OPTIONAL in SEM_MATCH based RDF query has been made available via patch 7600122 on 11.1.0.7. Direct use of SEM_MATCH to query your data from SQL has significant performance benefits.

  • Query-filter-options for everything.me Mozilla edition

    Where can I get the query-filter-options for everything.me Mozilla edition?

    Hi flegno,
    Depending on which version that Firefox is on, currently in the Simulator is looks like there is only a way to pin the apps that result in a searched category. Searching for people in contacts who have a particular app installed does not seem to be an option? However I cannot know for sure.
    Can you give another example on what you are looking for everything.me to do?

  • Can we perform Progress Order option from Order Header level?

    Hi,
    Can any one let me know about the basic functionality of Progress Order and on which scenario we can apply this option and also please clarify me the below doubt.
    Our Functionality as follows:
    1. Once the Order is booked then Credit Hold is applied against to the Order at the Order Header Level
    2. We are releasing the Hold from Actions tab
    3. Now we are placing the cursor at each Line Level and Progressing the Order using the Progress Order Option to fulfill and close the Sales Order lines.
    Now what my doubt is Credit Hold is applied at Order level but we are performing the Progress Order option from Level. When I try to user the same option from Order Header level system is showing the following error message “APP-ONT-251015: There are no eligible activities to be completed. There is at least one deferred or externally notifiedactivity in this workflow. Please see the workflow monitor or status window for more information” because of this I am using progress order option for each line.
    I want Progress Order option to applicable for entire Order so that I can fulfill and close all Lines at one time.
    What is the best way to Progress Order for entire Order instead of selecting each line to Progress the Order.
    Please share your views.
    Regards,
    Kevin.

    Hi Kevin,
    I am not quite sure if I understood your issue correctly but if you are using R12, there is a check box available called "Progress Workflow" on Holds definition, which will progress the entire order.
    With Regards,
    Vishal Majithia

  • Touch Up Reading Order options

    Are "touch up reading order options" available in the free trial of Adobe Acrobat 11?

    The Acrobat XI Pro trial is fully functional. The difference between it an a purchased/installed Acrobat XI Pro is that the trial folds up its tent and goes away after 30-days.
    btw - a C student is correct TORU and other facilities to "work" tagged PDF are still exclusive to the Pro release.
    Be well...

Maybe you are looking for