Query results and table contents does not match
Hi Experts,
This is regarding a simple select Qyery that is not working.
POSNR has a conversion exit at the data element level.
After using the conversion exit, I am putting a select on table PRTE by passing converted POSNR.
CODE given below:
CALL FUNCTION 'CONVERSION_EXIT_ABPSP_OUTPUT'
EXPORTING
input = w_anla-posnr
IMPORTING
OUTPUT = l_posnr
select single pstrt pende
from prte into w_prte
where posnr = l_posnr.
The Results fetched (two dates PSTRT and PENDE)by the Query Differs from the table entry.
Kindly guide me in the same..
Thanks in advance..
Deepak
Edited by: Deepak KM on Sep 25, 2008 10:00 AM
HI in Fm ,you use same variable in input and output either
w_anla-posnr or
i_posnr
Similar Messages
-
Hi,
I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
When i try to enroll a permanent smart card for a user, its shows me the following error:-
The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
Also there is no logging done for the particular event.
I am able to change my smart card pin and view my smart card info. through the FIM CM client.
Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
ThanksHi,
Sorry for the delay in reply.
Please try the following steps first:
Open Powershell as Administrator
Go to Start--> Run and type wbemtest.exe.
•Click Connect.
•In the namespace text box type "root" (without quotes).
•Click Connect.
•Click Enum Instances…
•In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
•In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
•In the Object Editor window, double-click HandlesPerHost.
•In the Value dialog, type in 8192
•Click Save Property.
•Click Save Object.
Under properties find the property "MemoryPerHost" or any other ones you need to modify and double click it
Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
Click Save Property
Click Save Object.
•Close Wbemtest.
•Restart the computer.
And if all nodes are Windows server 2012, install the following update rollup as well:
Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
http://support.microsoft.com/KB/2862768
If you have any feedback on our support, please send to [email protected] -
Shuffle play no longer works properly and the artwork does not match after iOS5 upgrade.
When I use shuffle play, my ipod touch stops playing after one or two songs and the artwork does not match the song.
i have what sounds like the exact problem; thought it might be related to a) my recent replacement phone, or b) my recent upgrade to OS 5.0.1
-
KE24 and KKBC_HOE balance does not match....
Hi,
We are facing a big issues at the end of the perio 2 of 2009. Our KE24 and KKBC_HOE balance does not match. We have ccompared/hecked all our previous months balance and there it was matching accurately. But for period 2, there is a mismatch.
Could anybody pls suggest why there is a difference. Is it becuse that KE24 will show only the itmes which are settled and KKBC_HOC inclues both Settled and not settled items..
Pls help on this......hi
as you said check whether some transcation has happend but which are not settled. -
MetaStream 3.0.15.12 Plugin is disabled and Flash content does not play.
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/791811]''
MetaStream 3.0.15.12 Plugin is disabled and Flash content does not play.Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash update and/or a malfunctioning browser plugin such as Real Player.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
* [[Flash Plugin - Keep it up to date and troubleshoot problems]]
* [[Flash 11.3 crashes]]
* [[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
* http://forums.adobe.com/thread/1018071?tstart=0
* http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Please report back soon. -
Processor type of the file and the device does not match
We ve the following problem with Zfh 7 sp1. When trying to distribute a
application we receive the message failed. When i open the log is see the
below message.
The processor type of the file and the device does not match.
I ve searched on the message and i ve seen that it is a know error and it
should be fixed in SP1
10100578 - ERROR: Skipped installation of file on device <DEVICE(Username)
> GUID <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>. The processor type of the
file and the device does not match.?
The processortype of the device is StrongARM and also from the
applications. Also when i put it on ALL/CEF it won't distribute.
Does some other people also have this problem.Mail,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Exchange 2010 - the SMTP RCPT TO and the header does not match (Carbon Copy disappears)
Dear All I have to investigate on a weird message which is carbon copied to many people who did not receive it.
As a matter of fact the SmtpReceives log recorded ONLY one person, directly addressed. I mean one SMTP RCPT TO. And the "Message Traking Results" is wholly consistent with it (with only one STOREDRIV). [Server version 14.3 (Build 123.4)]
Unfortunately Outlook 2010 shows a rather different header; in fact three CC are reported.
Any idea how to debug it? In my opinion it just a sender fault; one rcpt to settles things once and for all!
<,MAIL From:<[email protected]> SIZE=9455 BODY=8BITMIME,
>,250 2.1.0 Sender OK,
<,RCPT To:<[email protected]>,
<,DATA,
>,354 Start mail input; end with <CRLF>.<CRLF>,
>,250 2.6.0 <[email protected]> [InternalId=556164] Queued mail for delivery,
<,QUIT,
Thanks in advance.
Here's the Outlook 2010 message property:
Received: from deliver.hol.gr (62.38.3.39) by myMailer.myDomain.it (172.20.1.46) with Microsoft SMTP Server (TLS) id 14.3.210.2; Thu, 13 Nov 2014 10:37:54 +0100
Received: from auth-smtp.hol.gr (takeit01.mail.dc.hol.net [192.168.20.71]) by deliver.hol.gr (8.12.11/8.11.6) with ESMTP id sAD9bo8a027674 (using TLSv1/SSLv3 with cipher DHE-RSA-AES256-SHA (256 bits) verified FAIL) for [email protected]>; Thu, 13 Nov
2014 11:37:50 +0200
Received: from INTERNETPC-7.technomar.gr ([194.30.250.147]) (authenticated bits=0) by auth-smtp.hol.gr (8.13.1/8.13.1) with ESMTP id sAD9bmK9009834 for <[email protected]>; Thu, 13 Nov 2014 11:37:49 +0200
From: <[email protected]>
To: <[email protected]>
Date: Thu, 13 Nov 2014 11:37:48 +0200
Subject: Fw: Re: myTitle
CC: <[email protected]>, <[email protected]>,
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-7"
Content-Transfer-Encoding: 7bit
X-Mailer: Softway Communicator Mailer, SOFTWAY LTD. Piraeus GREECE
X-Virus-Scanned: ClamAV version 0.94.2, clamav-milter version 0.94.2 on takeit01.mail.dc.hol.net
X-Virus-Status: Clean
Return-Path: [email protected]
X-MS-Exchange-Organization-AuthAs: Anonymous
X-MS-Exchange-Organization-PRD: technomar.gr
X-MS-Exchange-Organization-SenderIdResult: None
Received-SPF: None (myMailer.myDomain.local: [email protected] does not designate permitted sender hosts)
X-MS-Exchange-Organization-Antispam-Report: ContentFilterConfigBypassedSender
X-MS-Exchange-Organization-SCL: -1I'm not sure what the question is here, so I'll see if I can go through your command sequences to figure it out. You have a user with outlook who sent a message to a single recipient with two in the CC line. In your SMTP sequence, that is the
RCPT to: [email protected] line. You have no other recipients on the To: line, so any other recipients will be in the DATA section of the message. I don't see any info in your
SMTP sequence that shows what the subject and CC lines were set to, so I'm going to assume those are not included in this information.
Now, since the To: line is covered in the RCPT To: line, and you agree that there was one recipient on that line, what question are we working on? If it's where the Cc: line recipients are, as I said, they should be in the DATA section which wasn't
included. Does that help? -
Minidump filename and .time output does not match
Hi,
I have a few minidumps from different machines. As far as I know, the filename of the minidump indicates the date of dump creation and so does the .time command in windbg. But in my case these do not match for the same dump. THe date in .time is one day
later than the minidump filename.
Is my understanding correct about the minidump filename and .time output?
thanks
KunalHi Kunal,
Can you please check if there's a difference in the date/time between the dump filename and the "Date Modified" for the dump files. You can check the "Date Modified" in windows explorer.
Hope, that'll answer your query.
(Please mark as answer if this resolves your query. Please upvote if this post is helpful.)
Regards,
Rajesh -
LIbrary Content does not match iPod
Just curious to know why my library lists 5010 items but when I update my iPod I show only 4992? Can anyone help me out on this?
Thanks!Theres things not being added to the iPOd from iTUnes, Since its only 18 iTems, Id say its a combo of video content thats not compatible with iPod, so its not added, and then songs and things you don't have a check mark beside
-
Query for Old Data that does not match New Data within a given time period
Hello all,
One of the reports I need to create is for all associates who went from one department to another within a given time period. The way I ran this report in Reportsmith (pulling from our old system) was to compare the dept field from the beginning date to the dept field at the end date and it would give me those associate's that had moved. I had to do it this way b/c dept changes can happen using several different types of actions (supv change, promotion, etc.), none of them exclusive to just dept changes. We are now using Oracle HRMS and I need to create this same report with this system using SQL.
Does anyone know how to compare data between two different dates and pull the ones that don't match? Your help will be GREATLY appreciated!
Warm Regards,
Yasmin E. Alberto
HRIS Analyst
[email protected]Hi, Yasmin,
In the sample data you posted, nobody changed departments between May 1 and May 11. In fact, there were no assignments of any kind between January 16 and May 17, so I wouldn't expect any output for that period.
A person (or rather, a duck) did change deptartments on May 20, so if you change the upper limit of the date range to
AND ASG_LAST_UPDATE_DATE < TO_DATE ('05/21/09', 'MM/DD/RR')you should see her.
You've probably noticed that this site likes to compress white-space.
To post formatted text (such as table results or indented code) type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing. -
Captivate preview and publish text does not match slide. (Magic Shrinking Text)
The text size on the Captivate slide matches the PowerPoint. So far so good.
When I preview (or publish) the SCORM module, the text shows up as a smaller size and moved to the left. I don't understand why it doesn't match the original captivate slide. It seems like it's arbitrarily shrinking some of the text. (Other slides come across just fine.)Go here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5 -
Software probe result and scope display do not match
I have a problem with a VI. I need your help.
The VI has a while loop that cycles every 200ms. In the while loop is a 'write to digital line VI' whose line state is connected to a local variable (fan)from a sub VI in the while loop. The sub VI is a case structure that excutes one of two subdiagrams depending on the values of two inputs. Each subdiagram controls one digital output. The subdiagrams are almost the same except one uses a 'greater? compare' and the other uses a 'less? compare. The true case that uses a 'less? compare' works properly. That is the output latches until the next iteration brings a different logic value. However the false case that uses a 'greater? compare' is acting strange at the hardware a
lthough the software probe shows proper functionality. In other words, the probe shows that the output of the 'greater? compare' latches to the value of the result until the next iteration introduces a different value. A scope at the output terminal, however, shows that the output is normally low and only momentarily pulses high when the output is true or 1. And the pulse is so brief that it cannot turn the device on.
Any idea what is going on?Can you create a simple example program to demo the problem?
-
Song file and info in iTunes does not match what plays
Hi I have a question. I purchased an album in the iTunes store and it worked fine. A few days later it was released that the iTunes Plus version was available and I could upgrade it. So I did that. After I did that I know notice that the file on my system and in iTunes does not match the song that plays. The order in the system and iTunes is correct. Is there a way that I can fix this so that the file and the title match the correct song without having to delete it and repurchase the album?
Don't repurchase it - you'll just be out more money.
contact itS and report this problem.
http://www.apple.com/support/itunes/store/browser/
Their first reply will be nonsense, but reply back to THAT and you may get somewhere. -
OpenLDAP: does not match filter
Hi,
we are using Deltek timeentry running on WebLogic and want to authenticate the users against out openLDAP server. (We already successfully authenticate two other groups of users against AD)
Now we created a third authenticator to the configuration using "OpenLDAPAuthenticator" and set the parameters accordingly.
In the log file of the LDAP-server we could see, that the principal can successfully bind to the server and tries to search for the user that is logging in.
But when searching for the user it uses the following filter:
(&(&(objectClass=posixAccount)(uid=foobar))(?=error))
which in the end results in:
bdb_search: 548 does not match filte
In the authenticator setup we only entered:
(&(objectClass=posixAccount)(uid=%u)
Where does the "(?=error)" come from - it seems, that this is causing the "does not match filter" ...
Any hint appreciated!
Thanks,
Thomas
P.S.: I'm completely new to WebLogic - so this post might lack some needed informations ;-)hi all,
while deploying the application i am getting this excepiton.
Exception:weblogic.management.ApplicationException: prepare failed for decevalweblogic.jar Module: decevalweblogic.jar Error: Exception preparing module: EJBModule(decevalweblogic.jar,status=NEW) Unable to deploy EJB: C:\beaweblogic\weblogic81\samples\domains\examples\.\examplesServer\.wlnotdelete\deceval\decevalweblogic.jar from decevalweblogic.jar: weblogic.ejb20.deployer.DeploymentDescriptorException: Unable to load a class specified in your ejb-jar.xml: Class bytes found but defineClass()failed for: 'com.deceval.siidj.siidserver.ParametrosObj' at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.initializeBeanInfos(MBeanDeploymentInfoImpl.java:550) at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.<init>(MBeanDeploymentInfoImpl.java:232) at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1302) at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:498) at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:3101) at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1560) at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1208) at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1051) at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2444) at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2394) at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2310) at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:866) at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:594) at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:508) at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
* [Deployer:149033]preparing application deceval on examplesServer
* [Deployer:149033]failed application deceval on examplesServer
* [Deployer:149034]An exception occurred for task [Deployer:149026]Deploy application deceval on examplesServer.: Exception:weblogic.management.ApplicationException: prepare failed for decevalweblogic.jar Module: decevalweblogic.jar Error: Exception preparing module: EJBModule(decevalweblogic.jar,status=NEW) Unable to deploy EJB: C:\beaweblogic\weblogic81\samples\domains\examples\.\examplesServer\.wlnotdelete\deceval\decevalweblogic.jar from decevalweblogic.jar: weblogic.ejb20.deployer.DeploymentDescriptorException: Unable to load a class specified in your ejb-jar.xml: Class bytes found but defineClass()failed for: 'com.deceval.siidj.siidserver.ParametrosObj' at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.initializeBeanInfos(MBeanDeploymentInfoImpl.java:550) at weblogic.ejb20.deployer.MBeanDeploymentInfoImpl.<init>(MBeanDeploymentInfoImpl.java:232) at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1302) at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:498) at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:3101) at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1560) at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1208) at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1051) at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2444) at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2394) at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2310) at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:866) at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:594) at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:508) at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178) .
please help me
thanks in advance
krishna -
IWeb 09 published site does not match what I've created!
So after working countless hours on a website, I finally finished it and used Cyberduck to upload the files. Once it finished I was so excited to check out the website only to find that a lot of the content does NOT match what I have created on my desktop iMac. Even widgets youtube and html snippets aren't working, but are working fine within iWeb as I have created the site. The fonts have uploaded all wrong and even borders and frames look different or aren't there all together. Also, the Google Map widget is causing some error through cyberduck upload and says it can't load it. How come my iWeb site looks great on my computer, but is totally hosed when uploaded to the FTP server? I'm freaking out and am desperate for help.
The website is www.mikewarobickgolf.com
I'm running Lion as well.
What do I need to do to get all the content of my iWeb site uploaded properly to the server? Please help!
If I am already screwed from running iWeb 09 with Lion, can you recommend an iWeb replacement? I'd rather get the site up now with iWeb and work on replacing it a later time if at all possible.You need to upload the Scripts folder to get your Widgets to work.
Try getting the full embed code for your Google map and pasting it into the HTML Snippet rather than use the Widget. According to Cyclosaurus ( the only person outside of Apple who seems to understand widgets), the Google maps widget won't work when MobileMe closes down at the end of the month.
I don't recommend any of these apps. As long as iWeb functions OK after the end of the month, I would continue using it until something better comes along.
In theory, Flux is probably the best bet since its a hybrid of code entry and drag and drop. In my opinion its too complicated and is not going to produce leaner code unless the user learns how to work with an external stylesheet. By the time you add inline styles and all that positioning info you're going to end up with more bloated code than an iWeb created site!
I don't know why someone can't come up with an app like iWeb that will utilise an external stylesheet and uses code injection and plugins. The big problem with iWeb is that apple didn't allow third party developers to create new widgets and responsive templates.
The main reason that I stopped using iWeb for new sites is that it can't produce responsive designs for mobile devices such as the iPhone. To extend its life, I did come up with an idea for producing a mobile version which may help some iWeb users...
http://www.iwebformusicians.com/iWeb/Mobile-iWeb.html
Maybe you are looking for
-
Problem with customer exit variable in BeX Query
Hi All, We have created a customer exit variable in a query and populated with few patterns in customer exit. My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not wo
-
Flash Player 11.5.502.135 erases the display window periodically
Using Firefox. At intervals of ~10s, the Flash window gets blanked out (filled with its background color) and elements that should be displayed only reappear when they are updated somehow, for instance when their position is moused over. I just updat
-
Using Windows NT 4.0 client program connecting to oracle 8i linux server
Dear sir/madam, Recently, I have successfully installed Oracle 8i in my red hat linux database server. I am disappointed because I can find client side Oracle Enterprise Manager in my linux server even I have installed client program in my linux data
-
Current Period" attribute for Variants not working correctly
Hi Expert, Pls i need your advice on the issue screenshot below. When creating variants, a dynamic screen selection can be chosen for "Current Period" that will pre-populate begin and end dates. The problem is that, this attribute gives calendar mont
-
Lost software for Creative Zen
I had to have everything wiped off of my computer and have it re-placed. Some how I have thrown out my disc that came with my Creative Zen MP3 player. My computer is no longer seeing my player! What can I do?