Query to run report
Hi,
I need to write a query to develop report as follows :
select pcode, pname, sum(qty)
from invoice_child, product
where invpcode=pcode
and pcode=(:vpcode)
group by pcode, pname;
Here bind variable ":vpcode" is referred in forms vpcode column and in forms, vpcode is tabular column which hold multiple value for pcode. How to run the report.
I am in problem, because I need to run a report for some selective product.
Please help......
Thanks
Niloy
You can't refer a forms-item in a report, but you can pass the items-value to the report. In the report, create a user-parameter named vpcode, then add a parameter to your reports-call in your with that name and the desired value (have a look at RUN_PRODUCT or RUN_REPORT_OBJECT, depending on your versions)
Similar Messages
-
Query not running in report builder 3.0
hi, i can run my query in mgmt studio (version 2008R2) and within the query designer of report builder 3.0 but it will not run from report builder. i get a generic error message of "an error has occurred during report processing. (rsProcessingAborted)".
the query uses report parameters and is written with dynamic sql (using a pass-through to oracle). any ideas why the query doesn't execute in report builder ? thanks a bunch,Hi KanataPablo,
According to your description, it seems that you are using linked server to pass value to oracle. Seeing that the query is worked well in Management Studio, you may have the permission to connect to oracle (In this scenario, make sure the users to run the
query in SSMS and Report Builder are the same user). So this issue can be caused by the user’s permission to connect to report server, the credential of data source and the dynamic query.
We can add the current user as a Login, then click Properties and navigate to User Mappings page, enable ReportServer and ReportServerTempDB options.
We can try to type user name and password, and enable “Use as Windows credentials” as the credential used to connect to data source.
Try with dynamic query:
="Select column1, column2 From tableName where ID IN (" + JOIN(Parameters!param1.value, ",") + ")"
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to terminate the running query for a report?
Hi,
When I run a report, the SQL query takes too long.
This causes an overload on database.
How do I stop query from running after some time?It is NOT possible in OBIEE 10g.
In OBIEE 11g, When a scheduled report job is in running status, you can now cancel the running job from the Report Job History page.
Check this Section 6.9, ["Canceling a Running Job." |http://docs.oracle.com/cd/E23943_01/bi.1111/e22257/view_manage_rpt_his.htm#cancel_runj]
And only possible since 11.1.1.5
regards
Jorge
p.s If this answers your question then please mark my answer as "Correct" or "Helpful" -
Executing PL-SQL Query before running a Report
Hi Guys,
Can i use a Run a Pl-Sql Query every time before executing a report. Like if i am opening a report then the pl-sql Query should run before it.
Thanks
Rondo.Try with Evaluate as one of the column's expression.. so that we can limit to specific report..
or
Use Connection Pool->Connection Pool Scripts tab->use 'Execute before query'
Since we can set the repository variables using advanced tab.. the same variable we may validate using Connection pool scripts tab.
This might be more dev work..
Edited by: Srini VEERAVALLI on Dec 17, 2012 9:00 PM -
How to get report (SQL Query) generating Run Time
There is a Standard report of Payroll which show employee transfer information on the bases of location, grade job or organization, now to get actual query which is generated by run time in report builder including whether single column parameter or lexical parameter " because currently the query in not complicate but the parameter and lexical parameter is much more due to this not quite easy to under stand just copy past it into toad or pl/sql developer,
Kindly share your experience to get such kind of query in you working time.
thanksHere i try to explain contain of query.
Parameter
P_DEPTNO = 10
P_WHERE_CLAUSE := ' AND EMPNO IS NOT NULL AND SALARY > 100'
SELECT * FROM EMP
WHERE DEPTNO = P_DEPTNO
&P_WHERE_CLAUSE
REPROT WILL GENERATE QUERY AT RUN TIME IS LIKE THAT
SELECT * FROM EMP
WHERE DEPTNO = 10
AND EMPNO IS NOT NULL AND SALARY > 100
Now i want to get this query out(Run time) by doing any oracle database feature or sth similar.
thanks -
Stop query on run on report startup
Hi
how to stop query on run on interactive report startup
ThanksHello,
What do you mean exactly by "interactive report startup" ?
Else, if you want to stop a running query you may kill the corresponding session.
So with OEM or by querying the v$session you may identify the session (sid, serial#) of the query
to stop. For instance:
alter session set nls_date_format = 'DD-MM-YYYY HH24:MI:SS';
select sid, serial#, status, schemaname, osuser, program, sql_id, logon_time
from v$session;Then, you may execute the following statement so as to KILL the session:
alter system kill session '<sid>,<serial#>';You may find some examples on the link below:
[http://www.psoug.org/reference/kill_session.html]
Hope this help.
Best regards,
Jean-Valentin -
WIJ 20002 error on long running reports
When trying to run a long running report, an error message is received .
Quote:
*"The Web Intelligence Java Report Panel cannot connect to the server. Close
the report panel and try to connect again or see your BusinessObjects
administrator. (Error: WIJ 20002)"*
What happens next is you are advised to "close" (twice) and are then advised to close this window.
If you select Details on the first error message:
Server: https://test.i3access.iowa.gov:443/desktoplaunch/InfoView/CrystalEnterprise_Webi/cdzServlet?
java.lang.RuntimeException: java.io.IOException: Server returned HTTP response code: 502 for URL: https://test.i3access.iowa.gov:443/desktoplaunch/InfoView/CrystalEnterprise_Webi/cdzServlet
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at com.businessobjects.wp.cpi.CPIConnection.postRequest(CPIConnection.java:437)
at com.businessobjects.wp.xml.XMLViaHttp.loadScript(XMLViaHttp.java:144)
at com.businessobjects.wp.xml.XMLViaHttp.getPromptList(XMLViaHttp.java:1284)
at com.businessobjects.wp.xml.XMLLoader.getPromptList(XMLLoader.java:279)
at com.businessobjects.wp.om.OMQuery.loadPromptsAndContexts(OMQuery.java:359)
at com.businessobjects.wp.om.OMQuery.getActiveContextCount(OMQuery.java:384)
at com.businessobjects.wp.tc.query.TCQueryPropertie.buildQueryContextFromUI(TCQueryPropertie.java:496)
at com.businessobjects.wp.tc.query.TCQueryTab.buildQueryContextFromUI(TCQueryTab.java:846)
at com.businessobjects.wp.tc.query.TCQueryTab.modifyQueryProperties(TCQueryTab.java:638)
at com.businessobjects.wp.tc.query.TCQueryTabManager.modifyQueryTabs(TCQueryTabManager.java:306)
at com.businessobjects.wp.tc.query.TCQueryPanel.modifyQueryTabs(TCQueryPanel.java:310)
at com.businessobjects.wp.tc.query.TCQueryPanel.load(TCQueryPanel.java:383)
at com.businessobjects.wp.tc.TCMainPanel.switchToQueryPanel(TCMainPanel.java:563)
at com.businessobjects.wp.tc.TCMainPanel.actionPerformed(TCMainPanel.java:506)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at com.jidesoft.plaf.basic.BasicJideButtonListener.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
at com.businessobjects.wp.cpi.CPIConnection.postRequest(CPIConnection.java:441)
at com.businessobjects.wp.xml.XMLViaHttp.loadScript(XMLViaHttp.java:144)
at com.businessobjects.wp.xml.XMLViaHttp.getPromptList(XMLViaHttp.java:1284)
at com.businessobjects.wp.xml.XMLLoader.getPromptList(XMLLoader.java:279)
at com.businessobjects.wp.om.OMQuery.loadPromptsAndContexts(OMQuery.java:359)
at com.businessobjects.wp.om.OMQuery.getActiveContextCount(OMQuery.java:384)
at com.businessobjects.wp.tc.query.TCQueryPropertie.buildQueryContextFromUI(TCQueryPropertie.java:496)
at com.businessobjects.wp.tc.query.TCQueryTab.buildQueryContextFromUI(TCQueryTab.java:846)
at com.businessobjects.wp.tc.query.TCQueryTab.modifyQueryProperties(TCQueryTab.java:638)
at com.businessobjects.wp.tc.query.TCQueryTabManager.modifyQueryTabs(TCQueryTabManager.java:306)
at com.businessobjects.wp.tc.query.TCQueryPanel.modifyQueryTabs(TCQueryPanel.java:310)
at com.businessobjects.wp.tc.query.TCQueryPanel.load(TCQueryPanel.java:383)
at com.businessobjects.wp.tc.TCMainPanel.switchToQueryPanel(TCMainPanel.java:563)
at com.businessobjects.wp.tc.TCMainPanel.actionPerformed(TCMainPanel.java:506)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at com.jidesoft.plaf.basic.BasicJideButtonListener.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Please let me know what the solution is.Matt,
A namesake of yours is my client for this issue.
Coming to the problem, the customer says there is proxy configured between HTTP server and WebSphere. This proxy server times out for long running reports. If the HTTPServer is bypassed, things work fine.
A colleague of mine opened a case with BOBJ. I can get you the case# if you need it. We got this reply:
From: Takano, Hitomi
Sent: Tuesday, November 04, 2008 10:26 AM
Hi Matt,
I was away for the last two days, so I couldn't reply to you sooner.
Extending the timeout setting from Webi and Infoview in BOXI R2 will not
make the long running reports work as your proxy setting at the lower
layer than BOXI just allows 5 minutes and after that the connection will
be cancelled by the proxy. I'm not sure why this setting was effective
for https only or timeout out after 2 min. This is out of scope of BOXI
R2 and your network admin would be the best person to handle. You were
getting 502 error in Java Report Panel. I googled with "502 error and
ProxyTimeout", and I got the some articles returned which say when
backend doesn't answer on requests(because it timed out), it returns to
a client an error 502.
I'll close this thread as the n/w admin at the client are working things out.
Thanks for your support. -
FRM-92101 error while running report from a button or menu
Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
ArifHello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif -
Script to kill long running reports in OBIEE
Hi
I have requirement to kill long running reports . I am using OBIEE version 10.1.3.4.0 which has a bug where it is not taking query limits governor and the reports are not getting killed if i am setting that parameter in RPD.
Oracle support has advised me to upgrade to next version, but for now, i cannot upgrade.
Can anyone suggest me script to run on obiee app server that can kill long running reports on obiee and database server.
I have AIX server and all reports run on database with same functional ID that is being used for ETL as well to Analytics database.Shikhs17 wrote:
Hi
I have requirement to kill long running reports . I am using OBIEE version 10.1.3.4.0 which has a bug where it is not taking query limits governor and the reports are not getting killed if i am setting that parameter in RPD.
Oracle support has advised me to upgrade to next version, but for now, i cannot upgrade.
Can anyone suggest me script to run on obiee app server that can kill long running reports on obiee and database server.
I have AIX server and all reports run on database with same functional ID that is being used for ETL as well to Analytics database.Do you want to enforce the limitation on the database to automatically kill running sessions that run over specific period of time? -
FRM-41214 unable to run report
Hi,
i'm trying in this days to migrate my software from 6i to 9i....
Particularly i had some problems when i try to launch a report from my form...
The form had migrated from Oracle 6i and it seems that it hasn't any type of problem but when i try to call a report from the web i obtain the error FRM-41214 (unable to run report)
but this report is correctly positioned in the right path and when i use a different report of a different project (compiled for the 9i) i note that the error occurs when i use one of my group obtained from my queries like source for a new repeating frame.....
Exactly until when i use one of the old groups of the old report it's all right but when i try to use a new group referred to a my new query i obtain the precedent error
(FRM-41214, unable to run report)
But i don't have any type of error when i compile...
Can anyone help me? Some one can tell me what can i do or some one can indicate me same document where i can read all the step to migrate a report??
Thanks a lot in advanceProblem resolved. Copy of document can be found
in METALINK, NOTE: 1069651.6. This will resolved the problem.
Thanks. -
Cursors are not closed when using Ref Cursor Query in a report ORA-01000
Dear Experts
Oracel database 11g,
developer suite 10.1.2.0.2,
application server 10.1.2.0.2,
Windows xp platform
For a long time, I'm hitting ORA-01000
I have a 2 group report (master and detail) using Ref Cusor query, when this report is run, I found that it opens several cursors (should be only one cursor) for the detail query although it should not, I found that the number of these cursors is equal to the number of master records.
Moreover, after the report is finished, these cursors are not closed, and they are increasing cumulatively each time I run the report, and finally the maximum number of open cursors is exceeded, and thus I get ORA-01000.
I increased the open cursors parameter for the database to an unbeleivable value 30000, but of course it will be exceeded during the session because the cursors are increasing cumulatively.
I Found that this problem is solved when using only one master Ref Cursor Query and create a breake group, the problem is solved also if we use SQL Query instead of Ref Query for the master and detail queries, but for some considerations, I should not use neither breake group nor SQL Query, I have to use REF Cursor queries.
Is this an oracle bug , and how can I overcome ?
Thanks
Edited by: Mostafa Abolaynain on May 6, 2012 9:58 AMThank you Inol for your answer, However
Ref Cursor give me felxibility to control the query, for example see the following query :
function QR_1RefCurDS return DEF_CURSORS.JOURHEAD_REFCUR is
temp_JOURHEAD DEF_CURSORS.JOURHEAD_refcur;
v_from_date DATE;
v_to_date DATE;
V_SERIAL_TYPE number;
begin
SELECT SERIAL_TYPE INTO V_SERIAL_TYPE
FROM ACC_VOUCHER_TYPES
where voucher_type='J'
and IDENT_NO=:IDENT
AND COMP_NO=TO_NUMBER(:COMPANY_NO);
IF :no_date=1 then
IF V_SERIAL_TYPE =1 THEN
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((TO_NUMBER(VOCH_NO)=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
OR (TO_NUMBER(VOCH_NO) BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
OR (TO_NUMBER(VOCH_NO)<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
ORDER BY TO_NUMBER(VOCH_NO);
ELSE
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((VOCH_NO=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
OR (VOCH_NO BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
OR (VOCH_NO<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
ORDER BY VOCH_NO;
END IF;
ELSE
v_from_date:=to_DATE(:from_date);
v_to_date:=to_DATE(:to_date);
IF V_SERIAL_TYPE =1 THEN
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
OR (:from_date is null and :to_date is null ))
ORDER BY VOCH_DATE,TO_NUMBER(VOCH_NO);
ELSE
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
OR (:from_date is null and :to_date is null ))
ORDER BY VOCH_DATE,VOCH_NO;
END IF;
END IF;
return temp_JOURHEAD;
end; -
Error when I run report RSCMST to test the content server.
when I run report "RSCMST" to test the my content server. I get the error:
header HTTP/1.1 401 Authorization Required
date: Fri, 05 Dec 2008 20:20:45 GMT
server: Apache/1.3.41 (Unix) SAPCS/640
x-servertime: 20:20:45
x-query: create&pVersion=0046&contRep=ZTEST001&docId=020D3949CA03445AE10000000A14022B&compId=data&docPro ..
t=rud&accessMode=c&authId=CN%3DCPJ&expiration=20081205142027&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYC
x-serverdate: 2008-12-05
x-pversion: 0046
x-errordescription: URI signature has expired
x-serverid: server="content01.ivo.com.cn";serverPort="1090"
x-servertype: SAP HTTP Content Server
content-length: 752
connection: close
content-type: text/plain
~remote_addr:
~uri_scheme_expanded: NONE
want 201
bad 401
time 17.974
It seems that the "bad 401" means a http error. I do not know how to configure it ?
my content server uses the maxdb, and http is apache, they are all running on redhat linux ese 5
who can give me some advices? thanksVictor,
Looks like a web server authentication issue. I suggest you raise this issue in a basis/ web application server forum,
Sojan -
Backend BW roles for users needed when running reports in infoview?
Hello all,
We are using SAP BI Queries as the sources of our universes, the user is going to logon to infoview to run report in webi. We have created some access levels in CMC to restrict users, the question is - the user will still need some kind of backend BW roles to have access to the BI query that is developed in BW system right? That way the user can fetch data?
Let me know
Thanks in advance.Hi,
If you are using SAP Authentication and Single sign on option in universe connection, the users must have sufficient roles to access SAP BW database.
if not, the only user login which you create during connection creation having roles to access to BW database is enough. In this case, the user can login to Infoview using any user and can access the report if he has priveleges to the report.
Hope this helps! -
Hello
I have built BI7 Query and run it. It goes to the portal where I use my user password and it comes back with the following results
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com.sap.ip.bi.base.parameter.ParameterConverter.createFromServletRequest(Ljavax/servlet/ServletRequest;)Lcom/sap/ip/bi/base/parameter/IParameterList;.
Exception id: 01:49_19/01/08_0045_52644550
See the details for the exception ID in the log file
I also cannot save a Web Template neither can I Save a Report using Report Desiner. Both come back with authorisation errror. I think all three could be related or maybe they are differnt.
Please can you guys help and offer a solution?
Thanks in advance.
Steve.Hi Lambertus,
I also face same problem. Please can you elaborate the solution you described or what should I be asking my basis team to do to solve this issue.
Regards
Anand -
FRM-41214: Unable to run Report geting as error
I am converting 6i reports to 11g for that i am compiling 6i report in 10g reports and copy in 11g server
in that report is calling from form i have writen query
like
DECLARE
paramlistname VARCHAR2(30) := 'PLIST1';
plid PARAMLIST;
cnt number;
report_id report_object;
BEGIN
plid := GET_PARAMETER_LIST(paramlistname);
IF NOT ID_NULL(plid) THEN
DESTROY_PARAMETER_LIST(paramlistname);
END IF;
plid := CREATE_PARAMETER_LIST(paramlistname);
ADD_PARAMETER(plid, 'paramform', TEXT_PARAMETER, 'NO');
ADD_PARAMETER(plid, 'p_division_code' , TEXT_PARAMETER, :control_007.division_code);
ADD_PARAMETER(plid, 'p_depot_code' , TEXT_PARAMETER, :control_007.depot_code);
ADD_PARAMETER(plid, 'P_VALIDITY_DATE' , TEXT_PARAMETER, to_char(:control_007.valid_date,'DD/MM/YYYY'));
ADD_PARAMETER(plid, 'MAXIMIZE', TEXT_PARAMETER, 'YES');
report_id := find_report_object('Report_NTP_Pending_QtyP');
web_reportn(report_id,plid);
DESTROY_PARAMETER_LIST(plid);
go_block('Control_007');
end;
while runging a report from form i am getting error FRM-41214 Unable to run Report
So Please Help Me how to solve this problem in 11gweb_reportn(report_id,plid);This is where you actually call the report, so the error is in that procedure. What is the code of this procedure?
Furthermore, I don't see any reference to system parameters, like destype, desname, report server name etc. Are they set in web_reportn?
Maybe you are looking for
-
Error message when configurin​g Sync
I downloaded Desktop 6.0, since I have Outlook 2010 (32 bit) on Windows 7. When I click Configure Settings under Synchronization, it pops up a window of "Determining the root configuration name for main system...", then pops up a small window, label
-
Please Help - ITunes with Airpot don't work
I have just installed Apple Airport in my wireless network in order to use my Hi-Fi equipment and use remote speakers. I checked (make a PING) and the airport responses ok. The problem I have is that, even I ticked properties in Itunest (mandatory to
-
My itunes library has multiple repeats of the same album
How do I condense the itunes library to only show the album once and move all the tracks under the same album ?
-
HT203180 My video I made on Imovie and sent to Itunes wont sync with my Ipad
My video I made on Imovie and sent to Itunes wont sync with my Ipad.
-
ASA 5512-X no int vlan command!?
I don't have much experience yet with ASAs but I thought the int vlan command should be available? It's an ASA 5512-X with IOS 8.6(1)2, should I upgrade to the newest 9 version? Also, there are rj45 interfaces and SFP interfaces which are numbered Gi