Query, where clause not working.

Hi,
Query is:
select vbeln posnr matnr
from vbap
into table it_ivbap.
it_ivbap is internal table. i got records when i executed this query.
gave a where clause
select vbeln posnr matnr
from vbap
into table it_ivbap
where vbeln = '5049'.
it is not returning any records. i tried with all the possile values of vbeln
what I am doing wrong.
Thanks in advance.

Hello,
Change like this,
select vbeln posnr matnr
from vbap
into table it_ivbap
where vbeln = '0000005049'. " Check here
Regards,
vasanth

Similar Messages

EQUAL condition on WHERE clause not working

Hi,
Can someone please tell me why the following WHERE clause (marked with ***** below) is not finding any EQUAL conditions?
I know that table i_cust_mast is populated with several thousand rows and that there ARE matching rows in KNVP.
Here is the code as I have it:
TYPES:
      BEGIN OF t_cust_mast,
        kunnr TYPE kunnr,
        name1 TYPE name1_gp,
        name2 TYPE name2_gp,
        stras TYPE stras_gp,
        adrnr TYPE adrnr,
        ort01 TYPE ort01_gp,
        regio TYPE regio,
        pstlz TYPE pstlz,
        vkbur TYPE vkbur,
        konda TYPE konda,
        sortl TYPE sortl,
        katr1 TYPE katr1,
        katr2 TYPE katr2,
        katr3 TYPE katr3,
        katr4 TYPE katr4,
        katr5 TYPE katr5,
        katr6 TYPE katr6,
        katr7 TYPE katr7,
        katr8 TYPE katr8,
        katr9 TYPE katr9,
        katr10 TYPE katr10,
        bzirk TYPE bzirk,
        vkgrp TYPE vkgrp,
        kdgrp TYPE kdgrp,
        klabc TYPE klabc,
        kondaa TYPE konda,
        kalks TYPE kalks,
        pltyp TYPE pltyp,
        hityp TYPE hityp_kh,
        hkunnr TYPE hkunnr_kh,
        datab TYPE datab,
        datbi TYPE datbi,
        lzone TYPE lzone,
      parvw TYPE parvw,
        kunn2 TYPE kunn2,
        kunn2a TYPE kunn2,
        kunn2b TYPE kunn2,
        kunn2c TYPE kunn2,
        kunn2d TYPE kunn2,
        kunn2e TYPE kunn2,
        kunn2f TYPE kunn2,
        kunn2g TYPE kunn2,
        parza TYPE parza,
        ktokd TYPE ktokd,
        loevm TYPE loevm_x,
      END OF t_cust_mast .
    TYPES:
      BEGIN OF t_part_func,
        kunnr TYPE kunnr,
        parvw type parvw,
        kunn2 TYPE kunn2,
        parza type parza,
      END OF t_part_func .
    TYPES:
      t_t_cust_mast TYPE STANDARD TABLE OF t_cust_mast,
      t_t_part_func TYPE STANDARD TABLE OF t_part_func.
    DATA: i_cust_mast TYPE t_t_cust_mast,
          i_part_func TYPE t_t_part_func.
CONSTANTS: c_type_a TYPE msgty VALUE 'A'.
FIELD-SYMBOLS: <x_cm> LIKE LINE OF i_cust_mast.
Get Customer Master Data
SELECT
   hkunnr hname1 hname2 hstras hadrnr hort01 h~regio
   hpstlz ivkbur ikonda hsortl hkatr1 hkatr2 h~katr3
   hkatr4 hkatr5 hkatr6 hkatr7 hkatr8 hkatr9 h~katr10
   ibzirk ivkgrp ikdgrp iklabc ikonda ikalks i~pltyp
   khityp khkunnr kdatab kdatbi h~lzone
   hktokd hloevm
INTO TABLE i_cust_mast " up to 50 rows
FROM kna1 AS h
JOIN knvv AS i ON ikunnr = hkunnr
JOIN knvh AS k ON hityp = c_type_a   " 'A'
                AND kkunnr = ikunnr
                AND kvkorg = ivkorg
                AND kvtweg = ivtweg
                AND kspart = ispart
                AND k~datab <= sy-datum
                AND k~datbi >= sy-datum.
IF sy-subrc = 0.
    SORT i_cust_mast[] BY kunnr.
ENDIF.
Get Partner Function Data for each Customer Master Record
LOOP AT i_cust_mast ASSIGNING <x_cm>.
    SELECT hkunnr hparvw hkunn2 hparza
      INTO TABLE i_part_func
    FROM knvp AS h
      WHERE h~kunnr = <x_cm>-kunnr.        ***** WHERE clause not finding any matches *****
ENDLOOP.
Thanks!!!
Andy

TYPES:
      BEGIN OF t_cust_mast,
        kunnr TYPE kunnr,
        name1 TYPE name1_gp,
        name2 TYPE name2_gp,
        stras TYPE stras_gp,
        adrnr TYPE adrnr,
        ort01 TYPE ort01_gp,
        regio TYPE regio,
        pstlz TYPE pstlz,
        vkbur TYPE vkbur,
        konda TYPE konda,
        sortl TYPE sortl,
        katr1 TYPE katr1,
        katr2 TYPE katr2,
        katr3 TYPE katr3,
        katr4 TYPE katr4,
        katr5 TYPE katr5,
        katr6 TYPE katr6,
        katr7 TYPE katr7,
        katr8 TYPE katr8,
        katr9 TYPE katr9,
        katr10 TYPE katr10,
        bzirk TYPE bzirk,
        vkgrp TYPE vkgrp,
        kdgrp TYPE kdgrp,
        klabc TYPE klabc,
        kondaa TYPE konda,
        kalks TYPE kalks,
        pltyp TYPE pltyp,
        hityp TYPE hityp_kh,
        hkunnr TYPE hkunnr_kh,
        datab TYPE datab,
        datbi TYPE datbi,
        lzone TYPE lzone,
      parvw TYPE parvw,
        kunn2 TYPE kunn2,
        kunn2a TYPE kunn2,
        kunn2b TYPE kunn2,
        kunn2c TYPE kunn2,
        kunn2d TYPE kunn2,
        kunn2e TYPE kunn2,
        kunn2f TYPE kunn2,
        kunn2g TYPE kunn2,
        parza TYPE parza,
        ktokd TYPE ktokd,
        loevm TYPE loevm_x,
      END OF t_cust_mast .
    TYPES:
      BEGIN OF t_part_func,
        kunnr TYPE kunnr,
        parvw type parvw,
        kunn2 TYPE kunn2,
        parza type parza,
      END OF t_part_func .
    TYPES:
      t_t_cust_mast TYPE STANDARD TABLE OF t_cust_mast,
      t_t_part_func TYPE STANDARD TABLE OF t_part_func.
    DATA: i_cust_mast TYPE t_t_cust_mast,
          i_part_func TYPE t_t_part_func.
CONSTANTS: c_type_a TYPE msgty VALUE 'A'.
FIELD-SYMBOLS: <x_cm> LIKE LINE OF i_cust_mast.
Get Customer Master Data
SELECT
   hkunnr hname1 hname2 hstras hadrnr hort01 h~regio
   hpstlz ivkbur ikonda hsortl hkatr1 hkatr2 h~katr3
   hkatr4 hkatr5 hkatr6 hkatr7 hkatr8 hkatr9 h~katr10
   ibzirk ivkgrp ikdgrp iklabc ikonda ikalks i~pltyp
   khityp khkunnr kdatab kdatbi h~lzone
   hktokd hloevm
INTO TABLE i_cust_mast " up to 50 rows
FROM kna1 AS h
JOIN knvv AS i ON ikunnr = hkunnr
JOIN knvh AS k ON hityp = c_type_a   " 'A'
                AND kkunnr = ikunnr
                AND kvkorg = ivkorg
                AND kvtweg = ivtweg
                AND kspart = ispart
                AND k~datab <= sy-datum
                AND k~datbi >= sy-datum.
IF sy-subrc = 0.
    SORT i_cust_mast[] BY kunnr.
ENDIF.
Get Partner Function Data for each Customer Master Record
LOOP AT i_cust_mast ASSIGNING <x_cm>.
    SELECT hkunnr hparvw hkunn2 hparza
      INTO TABLE i_part_func
    FROM knvp AS h
      WHERE h~kunnr = <x_cm>-kunnr.
ENDLOOP.

NVL in where clause not working with UNIX parameters

Apparently this in a where clause does not work in UNIX scripts...
.... and trans_date between to_date('&1','YYYY/MM/DD HH24:MI:SS')
and to_date(NVL('&2','31-DEC-4712'),'YYYY/MM/DD HH24:MI:SS')
and to_date(NVL('','31-DEC-4712'),'YYYY/MM/DD HH24:MI:SS')
ERROR at line 14:
ORA-01858: a non-numeric character was found where a numeric was expected
How do I get around a null in UNIX? This works fine if both parameters are populated. Thanks.

Jason ORCL wrote:
Apparently this in a where clause does not work in UNIX scripts...
.... and trans_date between to_date('&1','YYYY/MM/DD HH24:MI:SS')
and to_date(NVL('&2','31-DEC-4712'),'YYYY/MM/DD HH24:MI:SS')
and to_date(NVL('','31-DEC-4712'),'YYYY/MM/DD HH24:MI:SS')
ERROR at line 14:
ORA-01858: a non-numeric character was found where a numeric was expected
How do I get around a null in UNIX? This works fine if both parameters are populated. Thanks.it's nothing to do with unix at all - your date value doesn't match the format mask that you've entered:
'31-DEC-4712' doesn't map to 'YYYY/MM/DD HH24:MI:SS' in any universe unfortunately.

Two where clauses not working together

Good afternoon,
I have a query where I want to find out all unsorted stock (AA, BA, UP & BS) in certain depot's (Carbide dept, Harryworks and Adwick)
When I run these where clauses seperately they work but when I combine them they don't work where am I going wrong?
SELECT tblGRNItem.GRNPrefix + Convert(Varchar(10),tblGRNItem.GRN) AS GRNNumber, tblGRNItemStatus.ShortDescription, tblStorageLocation.Location, tblGRNItem.GRNItemNo, tblSupplier.SupplierName, tblGRNItem.MaterialDescription,tblGRNItem.NettWeight, tblGRNItem.LocalPrice, tblStaff.Initials, tblGRNItem.EstProductionHoursPerPO FROM tblGRNItem INNER JOIN tblGRNItemStatus ON tblGRNItem.GRNItemStatusID = tblGRNItemStatus.ItemStatusID INNER JOIN tblStorageLocation ON tblGRNItem.StorageLocationID = tblStorageLocation.LocationID INNER JOIN tblGRN ON tblGRNItem.GRNID = tblGRN.GRNID INNER JOIN tblSupplier ON tblGRN.SupplierID = tblSupplier.SupplierID INNER JOIN tblStaff ON tblGRNItem.SorterID = tblStaff.UserID
WHERE tblGRNItemStatus.ShortDescription LIKE 'UP' OR
tblGRNItemStatus.ShortDescription LIKE 'BA' OR
tblGRNItemStatus.ShortDescription LIKE 'AA' OR
tblGRNItemStatus.ShortDescription LIKE 'BS'

I don't understand the terminology you are using. Examples would help.
What do you mean by "works?" What does the query do that "doesn't work" and what does "works" mean? "Works" can mean anything from it includes too many rows or it excludes rows.
Give an example of running the where clause separately (and what is the result you get, either with actual results, representative results or describe the results); give an example of running with the where clauses combined (what is the result ...).
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

Programmatic setting of where clause not working.

Hi,
I am using Jdeveloper 11.1.2.2 .
I am trying query some rows from the VO by setting the VO in the programmatic way as given in this documentation : http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcquerying.htm#CHDEBEAF
But it is returning no rows. While I tried to query through the SQL Command Line it is querying the rows.
Is there any conditions that only bind variables declared in the VO can be queried in the programmatic way ? I tried that also. It is still not returning any rows.
Thanks,
Nigel.

in the line of fire wrote:
The best way to understand sql related issues is to enable debugger logs, where you can see actually what query is then executing. It really helps. Try it.I tried to run in the debugger mode, but there is no query execution seen. It is not throwing any errors, just its not returning the rows in the database.

Change my sql query where-clause in an extended controller

Hello,
i am trying to change my sql query where-clause in an extended controller
personAplListVO.setWhereClause(null); // first set to null
personAplListVO.setWhereClauseParams(null); // first set to null
personAplListVO.setWhereClause(personAplListVOWhereClause +
newWhereClause);
personAplListVO.setWhereClauseParams(whereClauseParams);
personAplListVO.executeQuery();
System.out.println(">>>>>>>>getQuery = " + personAplListVO.getQuery());
when i get the query ( personAplListVO.getQuery()) after executeQuery(), the new newWhereClause values are missing.
Also i am getting null from personAplListVO.getWhereClause() after executeQuery()
as if the above code is not making any effect.
any ideas why?
Thank you

Hello,
My Query:
/* Formatted on 2011/06/15 15:50 (Formatter Plus v4.8.8) */
SELECT /*+ FIRST_ROWS */
NULL AS selectflag, ppf.full_name AS person_name,
ppf.first_name AS person_first_name, ppf.last_name AS person_last_name,
ppf.email_address, addr.derived_locale, addr.address_id,
phn.phone_number, phn.phone_id, ppf.date_of_birth, addr.address_line1,
(SELECT COUNT (*)
FROM per_all_assignments_f paf2,
per_all_people_f ppf2
WHERE paf2.assignment_type = 'A'
AND :1 BETWEEN paf2.effective_start_date AND paf2.effective_end_date
AND paf2.person_id = ppf2.person_id
AND paf2.effective_start_date BETWEEN ppf2.effective_start_date
AND ppf2.effective_end_date
AND ppf2.party_id = ppf.party_id
HAVING COUNT (*) > 0) AS jobs_applied_for,
(SELECT MAX (paf.effective_start_date)
FROM per_all_assignments_f paf,
per_all_people_f ppf2
WHERE paf.assignment_type = 'A'
AND :2 >= paf.effective_start_date
AND paf.person_id = ppf2.person_id
AND paf.effective_start_date BETWEEN ppf2.effective_start_date
AND ppf2.effective_end_date
AND ppf2.party_id = ppf.party_id) AS last_application,
ppf.person_id, ppf.effective_start_date, ppf.effective_end_date,
DECODE (vac.manager_id, :3, 'Y', 'N') AS my_applicants,
vac.NAME AS vacancy_name, vac.vacancy_id, paf.assignment_id,
(SELECT /*+ push_subq */
MIN (pasf.effective_start_date)
FROM per_all_assignments_f pasf
WHERE pasf.assignment_id = paf.assignment_id) AS application_date,
paf.effective_end_date AS assignment_end_date,
ast.user_status AS application_status, ast.assignment_status_type_id,
vac.status AS vacancy_status, mgr.full_name AS recruiting_manager,
mgr.person_id AS recruiting_manager_id,
mgr.effective_start_date AS effective_start_date1,
mgr.effective_end_date AS effective_end_date1,
rec.full_name AS recruiter, rec.person_id AS recruiter_id,
rec.effective_start_date AS effective_start_date2,
rec.effective_end_date AS effective_end_date2,
ppf.per_information_category, ppf.per_information1,
ppf.per_information2, ppf.per_information3, ppf.per_information4,
ppf.per_information5, ppf.per_information6, ppf.per_information7,
ppf.per_information8, ppf.per_information9, ppf.per_information10,
ppf.per_information11, ppf.per_information12, ppf.per_information13,
ppf.per_information14, ppf.per_information15, ppf.per_information16,
ppf.per_information17, ppf.per_information18, ppf.per_information19,
ppf.per_information20, ppf.per_information21, ppf.per_information22,
ppf.per_information23, ppf.per_information24, ppf.per_information25,
ppf.per_information26, ppf.per_information27, ppf.per_information28,
ppf.per_information29, ppf.per_information30,
FLOOR
(irc_location_utility.sdo_miles (iwp.geometry, loc.geometry, 0.01)
) AS distance_to_location,
loc.location_id, loc.derived_locale AS derived_locale1,
doc.document_id, doc.file_name,
NVL2 (doc.document_id, 'Y', 'N') AS previewenabled,
inp.notification_preference_id, ppf.attribute_category, ppf.attribute1,
ppf.attribute2, ppf.attribute3, ppf.attribute4, ppf.attribute5,
ppf.attribute6, ppf.attribute7, ppf.attribute8, ppf.attribute9,
ppf.attribute10, ppf.attribute11, ppf.attribute12, ppf.attribute13,
ppf.attribute14, ppf.attribute15, ppf.attribute16, ppf.attribute17,
ppf.attribute18, ppf.attribute19, ppf.attribute20, ppf.attribute21,
ppf.attribute22, ppf.attribute23, ppf.attribute24, ppf.attribute25,
ppf.attribute26, ppf.attribute27, ppf.attribute28, ppf.attribute29,
ppf.attribute30, TO_CHAR (ROWNUM) AS rownumber,
TO_CHAR
((irc_utilities_pkg.get_recruitment_person_id (ppf.person_id, :4))
) AS root_person_id,
TO_CHAR
(irc_skills_matching_pkg.vacancy_match_percent
(irc_utilities_pkg.get_recruitment_person_id (ppf.person_id,
:5
vac.vacancy_id,
:6
) AS match_percent,
ppf.party_id, paf.effective_start_date AS assignment_start_date,
pov.vendor_id, pov.vendor_name, regatmpt.attempt_id AS reg_attempt_id,
TO_NUMBER (DECODE (regatmpt.raw_score, -1000, NULL, regatmpt.raw_score)
) AS reg_attempt_score,
NVL2
(regatmpt.mastery_score,
DECODE (GREATEST (regatmpt.mastery_score, regatmpt.raw_score),
regatmpt.raw_score, 'P',
'F'
NVL2 (fnd_profile.VALUE ('IRC_REGISTER_TEST'),
NVL2 (inp.attempt_id, 'A', 'N'),
NULL
) AS reg_attempt_status,
aplatmpt.attempt_id AS apl_attempt_id,
TO_NUMBER (DECODE (aplatmpt.raw_score, -1000, NULL, aplatmpt.raw_score)
) AS apl_attempt_score,
NVL2
(aplatmpt.mastery_score,
DECODE (GREATEST (aplatmpt.mastery_score, aplatmpt.raw_score),
aplatmpt.raw_score, 'P',
'F'
NVL2 (vac.assessment_id, NVL2 (iad.attempt_id, 'A', 'N'), NULL)
) AS apl_attempt_status,
hrl.meaning, hrl.lookup_type, hrl.lookup_code,
iad.assignment_details_id, iad.considered AS considered,
vac.business_group_id,
NVL
((SELECT iav.manage_applicants_allowed
FROM irc_agency_vacancies iav
WHERE iav.vacancy_id = vac.vacancy_id
AND iav.agency_id = fnd_profile.VALUE ('IRC_AGENCY_NAME')),
'Y'
) AS manage_applicants_allowed,
DECODE (paf.source_type, 'ER', 'Y', 'N') AS referred,
ircreferralinfoeo.start_date, ircreferralinfoeo.end_date,
(SELECT meaning
FROM hr_lookups
WHERE lookup_code = ircreferralinfoeo.source_type
AND lookup_type = 'REC_TYPE') AS sourcetype,
DECODE (ircreferralinfoeo.source_type,
'ER', (SELECT full_name
FROM per_all_people_f
WHERE person_id = ircreferralinfoeo.source_person_id
AND SYSDATE BETWEEN effective_start_date
AND effective_end_date),
ircreferralinfoeo.source_name
) AS sourcename,
ircreferralinfoeo.object_id, ircreferralinfoeo.object_type
FROM per_addresses addr,
per_phones phn,
per_all_people_f ppf,
per_all_assignments_f paf,
per_all_vacancies vac,
per_assignment_status_types_v ast,
per_all_people_f mgr,
per_all_people_f rec,
irc_notification_preferences inp,
hr_locations_all_vl loc,
irc_documents doc,
irc_search_criteria iwp,
per_all_people_f irc_ppf,
po_vendors pov,
ota_attempts regatmpt,
irc_assignment_details_f iad,
ota_attempts aplatmpt,
hr_lookups hrl,
irc_referral_info ircreferralinfoeo
WHERE irc_utilities_pkg.get_recruitment_person_id (ppf.person_id, :7) =
irc_ppf.person_id
AND :8 BETWEEN ppf.effective_start_date AND ppf.effective_end_date
AND irc_ppf.party_id = ppf.party_id
AND ppf.person_id = paf.person_id
AND paf.assignment_type = 'A'
AND paf.vacancy_id = vac.vacancy_id
AND :9 BETWEEN paf.effective_start_date AND paf.effective_end_date
AND paf.assignment_status_type_id = ast.assignment_status_type_id
AND irc_ppf.person_id = doc.person_id(+)
AND irc_ppf.person_id = phn.parent_id(+)
AND phn.parent_table(+) = 'PER_ALL_PEOPLE_F'
AND phn.phone_type(+) = 'H1'
AND :10 BETWEEN NVL (phn.date_from(+), :11) AND NVL (phn.date_to(+), :12)
AND vac.manager_id = mgr.person_id(+)
AND :13 BETWEEN mgr.effective_start_date(+) AND mgr.effective_end_date(+)
AND vac.recruiter_id = rec.person_id(+)
AND :14 BETWEEN rec.effective_start_date(+) AND rec.effective_end_date(+)
AND irc_ppf.person_id = inp.person_id(+)
AND inp.person_id = addr.person_id(+)
AND NVL (inp.address_id, DECODE (addr.address_type(+), 'REC', addr.address_id(+),
-1)) = addr.address_id(+)
AND :15 BETWEEN addr.date_from(+) AND NVL (addr.date_to(+), :16)
AND loc.location_id(+) = vac.location_id
AND doc.TYPE(+) LIKE '%RESUME'
AND doc.end_date(+) IS NULL
AND irc_ppf.person_id = iwp.object_id(+)
AND iwp.object_type(+) = 'WPREF'
AND :17 BETWEEN irc_ppf.effective_start_date AND irc_ppf.effective_end_date
AND ( inp.agency_id = fnd_profile.VALUE ('IRC_AGENCY_NAME')
OR fnd_profile.VALUE ('IRC_AGENCY_NAME') IS NULL
AND inp.agency_id = pov.vendor_id(+)
AND inp.attempt_id = regatmpt.attempt_id(+)
AND paf.assignment_id = iad.assignment_id(+)
AND :18 BETWEEN iad.effective_start_date(+) AND iad.effective_end_date(+)
AND iad.latest_details(+) = 'Y'
AND iad.attempt_id = aplatmpt.attempt_id(+)
AND hrl.lookup_type(+) = 'VACANCY_STATUS'
AND vac.status = hrl.lookup_code(+)
AND paf.assignment_id = ircreferralinfoeo.object_id(+)
AND SYSDATE BETWEEN ircreferralinfoeo.start_date(+) AND ircreferralinfoeo.end_date(+)
AND ( 1 = 1
AND (NVL (doc.document_id, 1) =
NVL ((SELECT MAX (idoc1.document_id)
FROM irc_documents idoc1
WHERE idoc1.person_id = irc_ppf.person_id
AND idoc1.TYPE IN ('RESUME', 'AUTO_RESUME')
AND idoc1.end_date IS NULL
AND idoc1.last_update_date =
(SELECT MAX (idoc2.last_update_date)
FROM irc_documents idoc2
WHERE idoc2.person_id = irc_ppf.person_id
AND idoc2.TYPE IN
('RESUME', 'AUTO_RESUME')
AND idoc2.end_date IS NULL)),
1
and my where clause that i want to append to the existing one:
and ppf.sex = 'M' and ppf.nationality = '1680'
my processFormRequest function in my extended CO
public void processFormRequest(OAPageContext pageContext,
OAWebBean webBean) {
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
String genderValue = pageContext.getParameter("gender");
String nationality = pageContext.getParameter("nationality");
ViewObject personAplListVO = am.findViewObject("PersonAplListVO");
String personAplListVOWhereClause = personAplListVO.getWhereClause();
Object[] whereClauseParams = personAplListVO.getWhereClauseParams();
String newWhereClause = "";
//gender
if (genderValue != null && !genderValue.trim().equals("")) {
newWhereClause += " and ppf.sex = '" + genderValue + "'";
//nationality
if (nationality != null && !nationality.trim().equals("")) {
newWhereClause += " and ppf.nationality = '" + nationality + "'";
System.out.println("\n>>>>>>>>getQuery = " + personAplListVO.getQuery());
System.out.println("\n>>>>>>>>newWhereClause = " + newWhereClause);
if (!newWhereClause.equals("")) {
personAplListVO.clearCache();
personAplListVO.setWhereClause(null); // first set to null
personAplListVO.setWhereClauseParams(null); // first set to null
personAplListVO.setWhereClause(personAplListVOWhereClause +
newWhereClause);
personAplListVO.setWhereClauseParams(whereClauseParams);
personAplListVO.executeQuery();
// System.out.println(">>>>>>>>newWhereClause" +
// personAplListVOWhereClause + newWhereClause);
// System.out.println(">>>>>>>>getWhereClause" +
// personAplListVO.getWhereClause());
// System.out.println(">>>>>>>>getQuery = " +
// personAplListVO.getQuery());
any tips?
thanks a lot

? Mail [12721] Error 1 performing query: WHERE clause too complex...

Console keeps showing this about a zillion times in a row, a zillion times a day: "Mail [12721] Error 1 performing query: WHERE clause too complex no more than 100 terms allowed"
I can't find any search results anywhere online about this.
Lots of stalls and freezes in mail, finder/os x, and safari -- freqent failures to maintain a broadband connection (multiple times every day).
All apps are slow, cranky with interminable beach balls getting worse all the time.
anyone know what the heck is going on?

Try rebuilding the mailbox to see if that helps.
Also, how much disk space is available on your boot drive?

Queryeditor using fields more than once in where clause not possible?

I have to create a select query with a WHERE clause using a field multiple times.
I can't get this to work. For example:
SELECT ALL
EMSDTALIB.EMSPPA.PAIDNR,
EMSDTALIB.EMSPPA.PANAAM,
EMSDTALIB.EMSPPA.PAVLTR,
EMSDTALIB.EMSPPA.PATITL,
EMSDTALIB.EMSPPA.PAADRS,
EMSDTALIB.EMSPPA.PAHSNR,
EMSDTALIB.EMSPPA.PAHSNT,
EMSDTALIB.EMSPPA.PAPCA1
FROM EMSDTALIB.EMSPPA
WHERE EMSDTALIB.EMSPPA.PABEDR=1 AND EMSDTALIB.EMSPPA.PADTUD=0 AND
(EMSDTALIB.EMSPPA.PADVBD='001' OR EMSDTALIB.EMSPPA.PADVBD='003' OR EMSDTALIB.EMSPPA.PADVBD='006')How do I get this to work?
Regards,
Roland

Hi Roland, Luca, ICON_SS,
I just tried similar queries using the latest release bits and it works fine.
My Queries that worked fine are :
SELECT ALL DASUSR1.PERSON.PERSONID, DASUSR1.PERSON.NAME, DASUSR1.PERSON.JOBTITLE, DASUSR1.PERSON.FREQUENTFLYER
FROM DASUSR1.PERSON
WHERE ( DASUSR1.PERSON.NAME='Able, Tony' OR NAME='Black, John' )
SELECT ALL DASUSR1.PERSON.PERSONID, DASUSR1.PERSON.NAME, DASUSR1.PERSON.JOBTITLE, DASUSR1.PERSON.FREQUENTFLYER
FROM DASUSR1.PERSON
WHERE ( DASUSR1.PERSON.PERSONID=1 OR PERSONID=2 OR PERSONID=3)
I would suggest you to Download & Install latest Creator bits released 9/27/2004, if not already done.
Appreciate your valuable feedback,
Sakthi

VOWizard-Bug: WHERE Clause not modified on EO add if manually changed befor

VOWizard-Bug: WHERE Clause is not modified on adding a EO (with association) if it was manually changed before
Testcase:
- Create a VO based on 2 EO (Association already defined) --> Jon in WHERE Clause automatically created by Wizard
- Then modify the WHERE clause, e.g. change an equal to outer join.
- All works fine.
- Then add a EO (also Association defined) and chose some attributes.
- Test and wonder why there are much more rows in the result than expected.
- Look into the Query-Tab and control the WHERE clause: Wizard forgot to add the new join... and therefore we get a cartesian product between the old view and the new added EO...
Possible solutions to fix the Bug:
1. add the JOIN ;-)
or
2. at least display a warning that the JOIN is not automatically created!
Regards, Markus
GE Medical Systems

Hi Markus-
Once the where clause has been customized, we don't update it in the interest of not messing up the user's custom code. However, we should probably warn the user in the types of cases you mention above that he will need to update the where clause manually to include the new information. We will add this in a future release.
Thanks,
Ray

In clause not working

Hi All,
SELECT sno,mid,mname
FROM manage_date
WHERE mname IN
('KIRAN-KUMAR',
'RAHUL-RAJ',
'KAUSHAL-SONI');
IF I use this query directly in DB it's working fine.
But when this query is calling in .net using parameter as below
it's not giving any records for more than one value.
IN (:p_mname)
If I pass one name 'KIRAN-KUMAR' from .net It's working.
If I pass multiple names from .net query not returning any records.
Please help me how to resolve this.
Thanks.

976208 wrote:
Hi All,
SELECT sno,mid,mname
FROM manage_date
WHERE mname IN
('KIRAN-KUMAR',
'RAHUL-RAJ',
'KAUSHAL-SONI');
IF I use this query directly in DB it's working fine.
But when this query is calling in .net using parameter as below
it's not giving any records for more than one value.
IN (:p_mname)
If I pass one name 'KIRAN-KUMAR' from .net It's working.
If I pass multiple names from .net query not returning any records.
Please help me how to resolve this.
Thanks.
But you won't be passing multiple names in that single bind variable, you'll be passing one string of names. Oracle is not going to magically know that just because you have commas in the string you intend to have seperate values... it doesn't work like that (and it shouldn't).
As Karthick pointed out, it's not a case that the IN clause is not working, it's a case of you not understanding the difference between the IN clause requiring a set of values as opposed to a single value, so you should read the FAQ link which points to useful information about how to deal with such situations.

MDX query - need to run different query (where clause) on mondays

The below query works OK and uses the substitution variable CurrentWeek in the WHERE clause, but I have one shortcoming that I need your help for:
The query works fine for all days but mondays. On Mondays I need the query to fetch numbers from last week (as opposed to current week) as the query returns null as the cubes have no data for current week on mondays. Hence I need to change the where clause to use substitution variable LastWeek, or in some other way run a different query on mondays. I have another substitution variable called WeekDay which I can use to test which day of the week it is, but I am not sure of the syntax I need to use to test for day of week and then have the query use different substitution variables as a result of this test.
Please help.
Henning Strand
SELECT NON EMPTY {[Measures].[meas_sg]} ON COLUMNS,
NON EMPTY {[Kunde],[Kunde].[KU01],[Kunde].[KU02],[Kunde].[KU03],[Kunde].[KU04]} ON ROWS
FROM MIFS.MIFS
WHERE ([Marked].[Dagligvare],[Tid].[&CurrentWeek])

Or to go off of Sean's suggestion, programmatically change the value of the substitution variable, and leave the code alone.
Other thoughts -- have a load process to a single cell (sorry, my BSO roots are showing, but the concept is the same, load a single number) and then do a boolean test off its value -- 0 = Monday, 1 = the rest of the week.
Regards,
Cameron Lackpour

SQL Query Single Row not working

My workflow contain a Query Single row activity. I have added a where clause in Arabic which is not working. If I remove the Arabic condition its working.
Is there something to do with the server?
My server is windows 2008 R2 Server.
The same workflow is running perfectly on another identical environment.
Thanks for any valuable suggestions,
Nith

Hi Sastry,
Connection to the database is trough Pivotal, I have tried ODBC connection as well but same error
The instruction at "0x005d53e0" refereced memory at "0x00000014'. The memory could not be "read".
With ODBC I have always compilation error saying
Query Engine Error: '42000:[Microsoft][ODBC SQL Server Driver][SQL server] Incorrect syntax near the keyword 'SELECT'. '.
but even the simple select statment is showing the error.
Do you think the error is with Drivers???
Regards
Stefan

Order by clause not working

Hi, everyone,
I am trying to use the following insert statement to insert records in asc order. if i use the select statement alone the order by clause works fine, but when i use the same sql and add a insert into table statment the order by clause does not work. I am not getting the records in ascending order. could anybody help me in this regard?
INSERT INTO cat_sales_stg
select      b.SSC,
     ltrim(rtrim(a.CAT_DESC)) cat_desc,
     SUM(a.AMOUNT) AMOUNT
FROM Trans a, SSC b
WHERE a.ACCOUNT_NUMBER = TO_CHAR(b.ACCOUNT_NUMBER)
     AND a.TMONTH >= 200905 AND a.TMONTH <= 200910
     AND a.FORMAT_NAME = 'ABC'
     AND b.BMONTH = 200910
     AND b.SAMPLE = 3
     AND b.BANNER_NAME = 'ABC'
     AND b.MODEL_NAME = 'XYZ'
group by b.SSC, ltrim(rtrim(a.CAT_DESC))
order by ssc,cat_desc
Thanks in advance

user10636796 wrote:
Hi, everyone,
I am trying to use the following insert statement to insert records in asc orderWhat Toon, William, and others have said is that you DON'T insert rows in a specific order. That is completely outside the way relational databases are designed. You insert rows as unordered and use an ORDER BY clause in a SELECT when reading them. ORDER BY is for SELECT statements, not INSERT.
In particular Toon poined out that we can't control where individual rows get stored.
There is a databas object called a varray that can store data in sorted order. I have never seen them used because selecting the data back out again is more work; using an ordinary table and an ORDER BY clause is much easier.

Issue with using SHUTTLE in query where clause

Lets say we have a shuttle control on the page with the following 4 values: apple:orange:peach:berry
Lets say I also have a simple SQL query report on the page and I want to use between 1 and 4 of the aforementioned values as part of an "*IN LIST*" sql operation. For example, if the user has selected only apple and orange from the shuttle, I want my query to be:
select * from some_table where fruit IN ('apple', 'orange');
if however, the user has selected all 4 fruits, the query should then read:
select * from some_table where fruit IN ('apple', 'orange', 'peach', 'berry');
I will add the dilemma that I do not want to convert this query to become a PL/SQL based report. Rather, I want to leave it alone as a SQL Query. My initial attempt was to create a hidden item on the page and use APEX_UTIL.STRING_TO_TABLE with a loop to convert the shuttle data to a comma separated list. This worked great, however when I use the this hidden item in my query, it doesn't work properly. I hope I am explaining this well, but when I populate this hidden item, I will get something like this.
apple,orange
Great. Lets say the hidden item above is called P7_HIDDEN_VALUE (for example). I then try to reference it in my query, and here is the problem:
select * from some_table where fruit IN (:P7_HIDDEN_ITEM)
Do you see the problem. The item resolves itself to be apple,orange, when it really needs the quotes to be *'apple','orange'*
Help!!!!

Hi,
This post might help
How to enable user to pick which row without using filter in interact. rpt?
Or Bens blog post
http://munkyben.wordpress.com/2010/11/16/handling-aggregated-strings-in-sql-reports/
Regards,
Jari

Linq to XML query where clause excluding null attribute in child

I'm quite new to linq/XML and although I'm making progress I'm stuck at combining two levels of elements in a where clause. The XML is something like this
<employees type="cashier">
<employee hired="Jun 1 2000" fired="Jun 1 2013">
<stats name="jane doe">
... other stuff ...
<stats />
<employee/> <employee hired="Jun 1 2000">
        <stats name="john doe">
            ... other stuff ...
        <stats />
    <employee/>
<employees/>
I'm trying to retrieve all employees of type "cashier" that haven't been fired.
I tried this
IEnumerable<XElement> CashierElements = from el in xDoc.Root.Descendants("employees")
where (string)el.Attribute("type")=="cashier"
&& (string)el.Element("stats").Attribute("fired") != null
select el;
But that returns entries where the fired attribute doesn't exist. I'm not even sure I can reference the stats element attribute in this way but VS2013 doesn't complain about it.
I have managed to muddle past by using two linq selections, the one above without the stats comparison followed by a second on the results that checks for "fired" being null.
How would I achieve this with one select statement?
Thanks!

Hi,
1) Your XML contains the attribute "fired" on "employee" element. Your query search this attribute on the "stats" element.
2) you say "that haven't been fired" by you search an attribute fired != null ? I'm not sure about your logic.
If I understand your request, your LINQ Query is more than :
IEnumerable<XElement> CashierElements =
// Loop on <employees>
from emps in xDoc.Root.Descendants("employees")
// only 'cashier' type
where (string)emps.Attribute("type") == "cashier"
// Loop on <employee> in filtered <employees>
from emp in emps.Elements("employee")
// only the employee not fired
where emp.Attribute("fired") == null
// select the employee element
select emp;
Regards
Yan Grenier
Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles.

Query, where clause not working.

Similar Messages

Maybe you are looking for