NVL in where clause not working with UNIX parameters
Apparently this in a where clause does not work in UNIX scripts...
.... and trans_date between to_date('&1','YYYY/MM/DD HH24:MI:SS')
and to_date(NVL('&2','31-DEC-4712'),'YYYY/MM/DD HH24:MI:SS')
and to_date(NVL('','31-DEC-4712'),'YYYY/MM/DD HH24:MI:SS')
ERROR at line 14:
ORA-01858: a non-numeric character was found where a numeric was expected
How do I get around a null in UNIX? This works fine if both parameters are populated. Thanks.
Jason ORCL wrote:
Apparently this in a where clause does not work in UNIX scripts...
.... and trans_date between to_date('&1','YYYY/MM/DD HH24:MI:SS')
and to_date(NVL('&2','31-DEC-4712'),'YYYY/MM/DD HH24:MI:SS')
and to_date(NVL('','31-DEC-4712'),'YYYY/MM/DD HH24:MI:SS')
ERROR at line 14:
ORA-01858: a non-numeric character was found where a numeric was expected
How do I get around a null in UNIX? This works fine if both parameters are populated. Thanks.it's nothing to do with unix at all - your date value doesn't match the format mask that you've entered:
'31-DEC-4712' doesn't map to 'YYYY/MM/DD HH24:MI:SS' in any universe unfortunately.
Similar Messages
-
EQUAL condition on WHERE clause not working
Hi,
Can someone please tell me why the following WHERE clause (marked with ***** below) is not finding any EQUAL conditions?
I know that table i_cust_mast is populated with several thousand rows and that there ARE matching rows in KNVP.
Here is the code as I have it:
TYPES:
BEGIN OF t_cust_mast,
kunnr TYPE kunnr,
name1 TYPE name1_gp,
name2 TYPE name2_gp,
stras TYPE stras_gp,
adrnr TYPE adrnr,
ort01 TYPE ort01_gp,
regio TYPE regio,
pstlz TYPE pstlz,
vkbur TYPE vkbur,
konda TYPE konda,
sortl TYPE sortl,
katr1 TYPE katr1,
katr2 TYPE katr2,
katr3 TYPE katr3,
katr4 TYPE katr4,
katr5 TYPE katr5,
katr6 TYPE katr6,
katr7 TYPE katr7,
katr8 TYPE katr8,
katr9 TYPE katr9,
katr10 TYPE katr10,
bzirk TYPE bzirk,
vkgrp TYPE vkgrp,
kdgrp TYPE kdgrp,
klabc TYPE klabc,
kondaa TYPE konda,
kalks TYPE kalks,
pltyp TYPE pltyp,
hityp TYPE hityp_kh,
hkunnr TYPE hkunnr_kh,
datab TYPE datab,
datbi TYPE datbi,
lzone TYPE lzone,
parvw TYPE parvw,
kunn2 TYPE kunn2,
kunn2a TYPE kunn2,
kunn2b TYPE kunn2,
kunn2c TYPE kunn2,
kunn2d TYPE kunn2,
kunn2e TYPE kunn2,
kunn2f TYPE kunn2,
kunn2g TYPE kunn2,
parza TYPE parza,
ktokd TYPE ktokd,
loevm TYPE loevm_x,
END OF t_cust_mast .
TYPES:
BEGIN OF t_part_func,
kunnr TYPE kunnr,
parvw type parvw,
kunn2 TYPE kunn2,
parza type parza,
END OF t_part_func .
TYPES:
t_t_cust_mast TYPE STANDARD TABLE OF t_cust_mast,
t_t_part_func TYPE STANDARD TABLE OF t_part_func.
DATA: i_cust_mast TYPE t_t_cust_mast,
i_part_func TYPE t_t_part_func.
CONSTANTS: c_type_a TYPE msgty VALUE 'A'.
FIELD-SYMBOLS: <x_cm> LIKE LINE OF i_cust_mast.
Get Customer Master Data
SELECT
hkunnr hname1 hname2 hstras hadrnr hort01 h~regio
hpstlz ivkbur ikonda hsortl hkatr1 hkatr2 h~katr3
hkatr4 hkatr5 hkatr6 hkatr7 hkatr8 hkatr9 h~katr10
ibzirk ivkgrp ikdgrp iklabc ikonda ikalks i~pltyp
khityp khkunnr kdatab kdatbi h~lzone
hktokd hloevm
INTO TABLE i_cust_mast " up to 50 rows
FROM kna1 AS h
JOIN knvv AS i ON ikunnr = hkunnr
JOIN knvh AS k ON hityp = c_type_a " 'A'
AND kkunnr = ikunnr
AND kvkorg = ivkorg
AND kvtweg = ivtweg
AND kspart = ispart
AND k~datab <= sy-datum
AND k~datbi >= sy-datum.
IF sy-subrc = 0.
SORT i_cust_mast[] BY kunnr.
ENDIF.
Get Partner Function Data for each Customer Master Record
LOOP AT i_cust_mast ASSIGNING <x_cm>.
SELECT hkunnr hparvw hkunn2 hparza
INTO TABLE i_part_func
FROM knvp AS h
WHERE h~kunnr = <x_cm>-kunnr. ***** WHERE clause not finding any matches *****
ENDLOOP.
Thanks!!!
AndyTYPES:
BEGIN OF t_cust_mast,
kunnr TYPE kunnr,
name1 TYPE name1_gp,
name2 TYPE name2_gp,
stras TYPE stras_gp,
adrnr TYPE adrnr,
ort01 TYPE ort01_gp,
regio TYPE regio,
pstlz TYPE pstlz,
vkbur TYPE vkbur,
konda TYPE konda,
sortl TYPE sortl,
katr1 TYPE katr1,
katr2 TYPE katr2,
katr3 TYPE katr3,
katr4 TYPE katr4,
katr5 TYPE katr5,
katr6 TYPE katr6,
katr7 TYPE katr7,
katr8 TYPE katr8,
katr9 TYPE katr9,
katr10 TYPE katr10,
bzirk TYPE bzirk,
vkgrp TYPE vkgrp,
kdgrp TYPE kdgrp,
klabc TYPE klabc,
kondaa TYPE konda,
kalks TYPE kalks,
pltyp TYPE pltyp,
hityp TYPE hityp_kh,
hkunnr TYPE hkunnr_kh,
datab TYPE datab,
datbi TYPE datbi,
lzone TYPE lzone,
parvw TYPE parvw,
kunn2 TYPE kunn2,
kunn2a TYPE kunn2,
kunn2b TYPE kunn2,
kunn2c TYPE kunn2,
kunn2d TYPE kunn2,
kunn2e TYPE kunn2,
kunn2f TYPE kunn2,
kunn2g TYPE kunn2,
parza TYPE parza,
ktokd TYPE ktokd,
loevm TYPE loevm_x,
END OF t_cust_mast .
TYPES:
BEGIN OF t_part_func,
kunnr TYPE kunnr,
parvw type parvw,
kunn2 TYPE kunn2,
parza type parza,
END OF t_part_func .
TYPES:
t_t_cust_mast TYPE STANDARD TABLE OF t_cust_mast,
t_t_part_func TYPE STANDARD TABLE OF t_part_func.
DATA: i_cust_mast TYPE t_t_cust_mast,
i_part_func TYPE t_t_part_func.
CONSTANTS: c_type_a TYPE msgty VALUE 'A'.
FIELD-SYMBOLS: <x_cm> LIKE LINE OF i_cust_mast.
Get Customer Master Data
SELECT
hkunnr hname1 hname2 hstras hadrnr hort01 h~regio
hpstlz ivkbur ikonda hsortl hkatr1 hkatr2 h~katr3
hkatr4 hkatr5 hkatr6 hkatr7 hkatr8 hkatr9 h~katr10
ibzirk ivkgrp ikdgrp iklabc ikonda ikalks i~pltyp
khityp khkunnr kdatab kdatbi h~lzone
hktokd hloevm
INTO TABLE i_cust_mast " up to 50 rows
FROM kna1 AS h
JOIN knvv AS i ON ikunnr = hkunnr
JOIN knvh AS k ON hityp = c_type_a " 'A'
AND kkunnr = ikunnr
AND kvkorg = ivkorg
AND kvtweg = ivtweg
AND kspart = ispart
AND k~datab <= sy-datum
AND k~datbi >= sy-datum.
IF sy-subrc = 0.
SORT i_cust_mast[] BY kunnr.
ENDIF.
Get Partner Function Data for each Customer Master Record
LOOP AT i_cust_mast ASSIGNING <x_cm>.
SELECT hkunnr hparvw hkunn2 hparza
INTO TABLE i_part_func
FROM knvp AS h
WHERE h~kunnr = <x_cm>-kunnr.
ENDLOOP. -
Query, where clause not working.
Hi,
Query is:
select vbeln posnr matnr
from vbap
into table it_ivbap.
it_ivbap is internal table. i got records when i executed this query.
gave a where clause
select vbeln posnr matnr
from vbap
into table it_ivbap
where vbeln = '5049'.
it is not returning any records. i tried with all the possile values of vbeln
what I am doing wrong.
Thanks in advance.Hello,
Change like this,
select vbeln posnr matnr
from vbap
into table it_ivbap
where vbeln = '0000005049'. " Check here
Regards,
vasanth -
Two where clauses not working together
Good afternoon,
I have a query where I want to find out all unsorted stock (AA, BA, UP & BS) in certain depot's (Carbide dept, Harryworks and Adwick)
When I run these where clauses seperately they work but when I combine them they don't work where am I going wrong?
SELECT tblGRNItem.GRNPrefix + Convert(Varchar(10),tblGRNItem.GRN) AS GRNNumber, tblGRNItemStatus.ShortDescription, tblStorageLocation.Location, tblGRNItem.GRNItemNo, tblSupplier.SupplierName, tblGRNItem.MaterialDescription,tblGRNItem.NettWeight, tblGRNItem.LocalPrice, tblStaff.Initials, tblGRNItem.EstProductionHoursPerPO FROM tblGRNItem INNER JOIN tblGRNItemStatus ON tblGRNItem.GRNItemStatusID = tblGRNItemStatus.ItemStatusID INNER JOIN tblStorageLocation ON tblGRNItem.StorageLocationID = tblStorageLocation.LocationID INNER JOIN tblGRN ON tblGRNItem.GRNID = tblGRN.GRNID INNER JOIN tblSupplier ON tblGRN.SupplierID = tblSupplier.SupplierID INNER JOIN tblStaff ON tblGRNItem.SorterID = tblStaff.UserID
WHERE tblGRNItemStatus.ShortDescription LIKE 'UP' OR
tblGRNItemStatus.ShortDescription LIKE 'BA' OR
tblGRNItemStatus.ShortDescription LIKE 'AA' OR
tblGRNItemStatus.ShortDescription LIKE 'BS'I don't understand the terminology you are using. Examples would help.
What do you mean by "works?" What does the query do that "doesn't work" and what does "works" mean? "Works" can mean anything from it includes too many rows or it excludes rows.
Give an example of running the where clause separately (and what is the result you get, either with actual results, representative results or describe the results); give an example of running with the where clauses combined (what is the result ...).
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com -
Why is rtmfp not working with these parameters and functions?
I wrote some basic functions in ActionScript in order to use RTMFP:
import flash.events.NetStatusEvent;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.ui.Keyboard;
private var serverAddress:String = "rtmfp://p2p.rtmfp.net/";
private var serverKey:String = "xxxxx";
private var netConnection:NetConnection;
private var outgoingStream:NetStream;
private var incomingStream:NetStream;
private function initConnection():void {
netConnection = new NetConnection();
netConnection.addEventListener(NetStatusEvent.NET_STATUS, netConnectionHandler);
netConnection.connect(serverAddress + serverKey);
private function netConnectionHandler(event:NetStatusEvent):void {
receivedMessages.text += "NC Status: " + event.info.code + "\n";
//Some status handling will be here, for now, just print the result out.
switch (event.info.code) {
case 'NetConnection.Connect.Success':
receivedMessages.text += "My ID: " + netConnection.nearID + "\n";
break;
private function sendInit():void {
outgoingStream = new NetStream(netConnection, NetStream.DIRECT_CONNECTIONS);
outgoingStream.addEventListener(NetStatusEvent.NET_STATUS, outgoingStreamHandler);
outgoingStream.publish("media");
var sendStreamObject:Object = new Object();
sendStreamObject.onPeerConnect = function(sendStr:NetStream):Boolean {
receivedMessages.text += "Peer Connected ID: " + sendStr.farID + "\n";
return true;
outgoingStream.client = sendStreamObject;
private function receiveInit():void {
receivedMessages.text += "Initializing Receiving Stream: " + incomingID.text + "\n";
incomingStream = new NetStream(netConnection, incomingID.text);
incomingStream.addEventListener(NetStatusEvent.NET_STATUS, incomingStreamHandler);
incomingStream.play("media");
incomingStream.client = this;
public function receiveMessage(message:String):void {
receivedMessages.text += "Received Message: " + message + "\n";
private function outgoingStreamHandler(event:NetStatusEvent):void {
receivedMessages.text += "Outgoing Stream: " + event.info.code + "\n";
private function incomingStreamHandler(event:NetStatusEvent):void {
receivedMessages.text += "Incoming Stream: " + event.info.code + "\n";
private function sendMessage():void {
outgoingStream.send("receiveMessage", toSendText.text);
private function disconnectNetConnection():void {
netConnection.close();
netConnection.removeEventListener(NetStatusEvent.NET_STATUS, netConnectionHandler);
netConnection = null;
private function disconnectOutgoing():void {
outgoingStream.close();
outgoingStream.removeEventListener(NetStatusEvent.NET_STATUS, outgoingStreamHandler);
outgoingStream = null;
private function disconnectIncoming():void {
incomingStream.close();
incomingStream.removeEventListener(NetStatusEvent.NET_STATUS, incomingStreamHandler);
incomingStream = null;
Notes:
initConnection initializes the NC, sendInit initializes the send stream
receiveInit initializes the incoming stream based on the far peer id which I copy paste intoincomingID.text
I print every results into receivedMessages.text
I do not have firewall, nor NAT.
The Adobe sample application (http://labs.adobe.com/technologies/cirrus/samples/) works perfectly.
The procedure I follow:
Initialize NC on application 1. (sender)
Initialize NC on application 2. (receiver)
I initialize the sending stream (sendInit) on application 1.
I copy the far peer id to application 2. and run receveInit.
After this, I execute sendMessage() which reads the message from toSendText.text.
Does not working. Why? What is wrong with my codes?
Thank you for every helpful answer in advance.Jesus. I found out.
I used to test the application on the same computer I am doing the development on, its a Mac (OSX 10.8.2, Chrome 24.0.1312.57).
Later, I put it on Windows, to see if everything is okay. It worked.
My RTMFP works on Windows, but not on Mac.
It's strange. -
Programmatic setting of where clause not working.
Hi,
I am using Jdeveloper 11.1.2.2 .
I am trying query some rows from the VO by setting the VO in the programmatic way as given in this documentation : http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcquerying.htm#CHDEBEAF
But it is returning no rows. While I tried to query through the SQL Command Line it is querying the rows.
Is there any conditions that only bind variables declared in the VO can be queried in the programmatic way ? I tried that also. It is still not returning any rows.
Thanks,
Nigel.in the line of fire wrote:
The best way to understand sql related issues is to enable debugger logs, where you can see actually what query is then executing. It really helps. Try it.I tried to run in the debugger mode, but there is no query execution seen. It is not throwing any errors, just its not returning the rows in the database. -
Procedure failed while using bulk collect into clause and works with cursor
hi all,
I am using "BULK collect into" clause in my procedure and it is failing after 21 minutes and gives the error "end of file communication channel".
after this error comes when i tried to connect database it is giving following error.
ORA -01034 - Oracle not available.
ORA- 27101 - shared memory realm does not exist.
svr4- error :2 : No such file or directory.
when i use cursor instead of BULK COLLECT INTO clause it is running successful.
Following code is working with cursor.
procedure work_kiosk_full(an_jobid in number ,ac_sqlcode out varchar2 ,ac_sqlerrm out varchar2) is
ld_curr_time Date;
cursor cur_work_kiosk is
select distinct jt.jt_id AS jt_id,
NVL ((ROUND ((jt_date_completed - jt_date_requested) * 24, 2)
0
) AS actual_hrs_to_complete,
NVL ((ROUND ((jt_date_responded - jt_date_requested) * 24, 2)
0
) AS actual_hrs_to_respond,
peo1.peo_name AS agent_name,
peo1.peo_user_name AS asagent_soe_id,
le.lglent_desc AS ap_system,
' ' AS assign_work_request_comment,
DECODE (jt.jt_bill_id,
138802, 'CLIENT BILLABLE',
138803, 'CONTRACTED',
138804, 'INTERNAL BILLABLE',
NULL, ' '
) AS billable,
bl.bldg_name_cc AS building, bl.bldg_id_ls AS building_id,
DECODE (bl.bldg_active_cc,
'Y', 'ACTIVE',
'INACTIVE'
) AS building_status,
DECODE (jt.jt_wrk_cause_id,
141521, 'STANDARD WEAR AND TEAR',
141522, 'NEGLIGENCE',
141523, 'ACCIDENTAL',
141524, 'MECHANICAL MALFUNCTION',
141525, 'OVERSIGHT',
141526, 'VANDAL',
141527, 'STANDARD',
141528, 'PROJECT WORK',
6058229, 'TEST',
NULL, ' '
) AS cause_type,
' ' AS comments, peo3.peo_name AS completed_by,
jt.jt_requestor_email AS contact_email,
jt.jt_requestor_name_first
|| ' '
|| jt.jt_requestor_name_last AS contact_name,
jt.jt_requestor_phone AS contact_phone,
cc.cstctrcd_apcode AS corp_code,
cc.cstctrcd_code AS cost_center,
jt.jt_date_closed AS date_closed,
jt.jt_date_completed AS date_completed,
jt.jt_date_requested AS date_requested,
jt.jt_date_responded AS date_responded,
jt.jt_date_response_ecd AS date_response_ecd,
jt.jt_date_scheduled AS date_scheduled,
DECODE (jt.jt_def_id,
139949, 'WTG VENDOR RESPONSE',
139950, 'WAITING ON PARTS',
139951, 'LABOR AVAILABILITY',
139952, 'DEFERRED- HI PRI WORK',
139953, 'WTG APPROVAL',
139954, 'FUNDING REQUIRED',
139955, 'ACCESS DENIED',
139956, 'WTG MATERIAL',
NULL, ' '
) AS deferral_reason,
jt.jt_description AS description,
jt.jt_date_resched_ecd AS ecd,
fmg.facility_manager AS facility_manager,
fl.floors_text AS FLOOR, gl.genled_desc AS general_ledger,
' ' AS kiosk_date_requested, ' ' AS kiosk_dispatch_confirmed,
' ' AS kiosk_dispatched,
eqp.equip_customer_code AS linked_equipment_alias,
eqp.equip_id AS linked_equipment_id,
eqp.equip_text AS linked_equipment_name,
DECODE (jt_originator_type_id,
1000, 'PROJECT MOVE REQUEST',
138834, 'CUSTOMER INITIATED CORRECTION',
138835, 'CUSTOMER INITIATED REQUEST',
138836, 'CORRECTIVE MAINTENANCE',
138837, 'CONFERENCE ROOM BOOKING',
138838, 'PROJECT INITIATED REQUEST',
138839, 'PLANNED PREVENTIVE MAINTENANCE',
138840, 'SELF INITATED REQUEST',
NULL, ' '
) AS originator_type,
' ' AS payment_terms, priority_text AS priority_code,
swoty.sworktype_text AS problem_type,
prop.property_name_cc AS property,
jt.jt_cost_quote_total AS quote_total,
par.levels_name AS region,
DECODE (jt.jt_repdef_id,
141534, 'ADJUSTED SETTING',
141535, 'TRAINING FOR END',
141536, 'NEW REQUEST',
141537, 'NO REPAIR REQUIR',
141538, 'REPLACED PARTS',
141539, 'REPLACE EQUIPMEN',
1000699, 'NEW REQUEST',
NULL, ' '
) AS repair_definitions,
jt.jt_repairdesc AS repair_description,
jt.jt_requestor AS requestor, ' ' AS requestor_cost_center,
jt.jt_requestor_email AS requestor_email,
jt.jt_requestor_name_first AS requestor_name,
jt.jt_requestor_phone AS requestor_phone,
' ' AS response_time, rm.room_name_cc AS room,
p1.peo_provider_code1 AS service_provider,
p1.peo_address_1 AS service_provider_address,
peocity.city_text service_provider_city,
p1.peo_provider_code1 AS service_provider_code,
peocity.city_country_name AS service_provider_country,
peocur.currency_text AS service_provider_currency,
p1.peo_name AS service_provider_description,
p1.peo_dispatch_method AS serv_prov_dispatc_hmethod,
p1.peo_rate_double AS serv_prov_double_time_rate,
p1.peo_email AS service_provider_email,
p1.peo_emergency_phone AS serv_prov_emergency_phone,
p1.peo_fax AS service_provider_fax_number,
p1.peo_home_phone AS service_provider_home_phone,
p1.peo_rate_hourly AS service_provider_hourly_rate,
p1.peo_title AS service_provider_job_title,
p1.peo_method_id AS service_provider_method,
p1.peo_cell_phone AS service_provider_mobile_phone,
p1.peo_pager AS service_provider_pager,
p1.peo_rate_differential AS service_provider_rates,
p1.peo_rate_differential AS ser_prov_shift_differential,
peocity.city_state_prov_text AS serv_prov_state_province,
DECODE (p1.peo_active,
'Y', 'ACTIVE',
'INACTIVE'
) AS service_provider_status,
p1.peo_url AS serv_prov_web_site_address,
p1.peo_phone AS service_provider_work_phone,
p1.peo_postal_code AS serv_prov_zip_postal_code, ' ' AS shift,
' ' AS skill,
DECODE (jt.jt_bigstatus_id,
138813, 'NEW',
138814, 'PENDING',
138815, 'OPEN',
138816, 'COMPLETED',
138817, 'CLOSED',
138818, 'CANCELLED',
NULL, ' '
) AS status,
lev.levels_name AS subregion, ' ' AS trade,
p1.peo_ls_interface_code1 AS vendor_id,
p1.peo_fax AS vendor_purchasing_fax,
p1.peo_vendor_site_code AS vendor_sitecode,
jt.jt_id AS vendor_ticket, p1.peo_name AS vendor_companyname,
jt.jt_requestor_vip AS vip, wo.wo_id AS work_order_no,
jt.jt_id AS work_request,
jt.jt_class_id AS work_request_class,
woty.worktype_text AS work_type, ' ' AS wr_cost,
jt.jt_description AS wr_description,
' ' AS wr_dispatch_method,
DECODE (jt.jt_bigstatus_id,
138813, 'NEW',
138814, 'PENDING',
138815, 'OPEN',
138816, 'COMPLETED',
138817, 'CLOSED',
138818, 'CANCELLED',
NULL, ' '
) AS wr_status,
ctry.country_name AS country
FROM citi.jobticket jt,
citi.property prop,
citi.bldg bl,
citi.bldg_levels bldglvl,
citi.LEVELS lev,
citi.LEVELS par,
(SELECT crstools.stragg (peo_name) facility_manager,
bldgcon_bldg_id
FROM citi.bldg_contacts, citi.people
WHERE bldgcon_peo_id = peo_id
AND bldgcon_contype_id IN (40181, 10142)
GROUP BY bldgcon_bldg_id) fmg,
citi.floors fl,
citi.room rm,
citi.general_ledger gl,
citi.legal_entity le,
citi.cost_center_codes cc,
citi.equipment eqp,
citi.worktype woty,
citi.subworktype swoty,
citi.work_order wo,
citi.jt_workers jtwo,
citi.priority,
citi.country ctry,
citi.people p1,
citi.people peo3,
citi.people peo1,
citi.city peocity,
citi.currency peocur
WHERE jt.jt_bldg_id = bl.bldg_id
AND bl.bldg_id = bldglvl.bldg_levels_bldg_id
AND bldglvl.bldg_levels_levels_id = lev.levels_id
AND lev.levels_parent = par.levels_id(+)
AND prop.property_id = bl.bldg_property_id
AND bl.bldg_active_ls <> 'N'
AND jt.jt_floors_id = fl.floors_id(+)
AND jt.jt_room_id = rm.room_id(+)
AND jt.jt_bldg_id = fmg.bldgcon_bldg_id(+)
AND jt.jt_genled_id = gl.genled_id(+)
AND gl.genled_lglent_id = le.lglent_id(+)
AND jt.jt_cstctrcd_id = cc.cstctrcd_id(+)
AND jt.jt_equip_id = eqp.equip_id(+)
AND jt.jt_id = jtwo.jtw_jt_id(+)
AND jt.jt_worktype_id = woty.worktype_id(+)
AND jt.jt_sworktype_id = swoty.sworktype_id(+)
AND jt.jt_wo_id = wo.wo_id
AND jt.jt_priority_id = priority_id(+)
--AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12)
AND jt.jt_last_update >= ADD_MONTHS (ld_curr_time, -12)
AND bl.bldg_country_id = ctry.country_id
AND jtwo.jtw_peo_id = p1.peo_id(+)
AND p1.peo_city_id = peocity.city_id(+)
AND jt.jt_completed_by_peo_id = peo3.peo_id(+)
AND p1.peo_rate_currency_id = peocur.currency_id(+)
AND jt.jt_agent_peo_id = peo1.peo_id(+);
BEGIN
execute immediate 'truncate table crstools.drt_bom_work_kiosk';
select sysdate into ld_curr_time from dual;
FOR cur_rec in cur_work_kiosk LOOP
IF MOD(cur_work_kiosk%rowcount,10000 ) = 0 then
COMMIT;
END IF;
INSERT INTO crstools.drt_bom_work_kiosk
( JT_ID
,ACTUAL_HRS_TO_COMPLETE
,ACTUAL_HRS_TO_RESPOND
,AGENT_NAME
,ASAGENT_SOE_ID
,AP_SYSTEM
,ASSIGN_WORK_REQUEST_COMMENT
,BILLABLE
,BUILDING
,BUILDING_ID
,BUILDING_STATUS
,CAUSE_TYPE
,COMMENTS
,COMPLETED_BY
,CONTACT_EMAIL
,CONTACT_NAME
,CONTACT_PHONE
,CORP_CODE
,COST_CENTER
,DATE_CLOSED
,DATE_COMPLETED
,DATE_REQUESTED
,DATE_RESPONDED
,DATE_RESPONSE_ECD
,DATE_SCHEDULED
,DEFERRAL_REASON
,DESCRIPTION
,ECD
,FACILITY_MANAGER
,FLOOR
,GENERAL_LEDGER
,KIOSK_DATE_REQUESTED
,KIOSK_DISPATCH_CONFIRMED
,KIOSK_DISPATCHED
,LINKED_EQUIPMENT_ALIAS
,LINKED_EQUIPMENT_ID
,LINKED_EQUIPMENT_NAME
,ORIGINATOR_TYPE
,PAYMENT_TERMS
,PRIORITY_CODE
,PROBLEM_TYPE
,PROPERTY
,QUOTE_TOTAL
,REGION
,REPAIR_DEFINITIONS
,REPAIR_DESCRIPTION
,REQUESTOR
,REQUESTOR_COST_CENTER
,REQUESTOR_EMAIL
,REQUESTOR_NAME
,REQUESTOR_PHONE
,RESPONSE_TIME
,ROOM
,SERVICE_PROVIDER
,SERVICE_PROVIDER_ADDRESS
,SERVICE_PROVIDER_CITY
,SERVICE_PROVIDER_CODE
,SERVICE_PROVIDER_COUNTRY
,SERVICE_PROVIDER_CURRENCY
,SERVICE_PROVIDER_DESCRIPTION
,SERV_PROV_DISPATC_HMETHOD
,SERV_PROV_DOUBLE_TIME_RATE
,SERVICE_PROVIDER_EMAIL
,SERV_PROV_EMERGENCY_PHONE
,SERVICE_PROVIDER_FAX_NUMBER
,SERVICE_PROVIDER_HOME_PHONE
,SERVICE_PROVIDER_HOURLY_RATE
,SERVICE_PROVIDER_JOB_TITLE
,SERVICE_PROVIDER_METHOD
,SERVICE_PROVIDER_MOBILE_PHONE
,SERVICE_PROVIDER_PAGER
,SERVICE_PROVIDER_RATES
,SER_PROV_SHIFT_DIFFERENTIAL
,SERV_PROV_STATE_PROVINCE
,SERVICE_PROVIDER_STATUS
,SERV_PROV_WEB_SITE_ADDRESS
,SERVICE_PROVIDER_WORK_PHONE
,SERV_PROV_ZIP_POSTAL_CODE
,SHIFT
,SKILL
,STATUS
,SUBREGION
,TRADE
,VENDOR_ID
,VENDOR_PURCHASING_FAX
,VENDOR_SITECODE
,VENDOR_TICKET
,VENDOR_COMPANYNAME
,VIP
,WORK_ORDER_NO
,WORK_REQUEST
,WORK_REQUEST_CLASS
,WORK_TYPE
,WR_COST
,WR_DESCRIPTION
,WR_DISPATCH_METHOD
,WR_STATUS
,COUNTRY
,CREATE_DATE
VALUES
(cur_rec.jt_id
,cur_rec.ACTUAL_HRS_TO_COMPLETE
,cur_rec.ACTUAL_HRS_TO_RESPOND
,cur_rec.AGENT_NAME
,cur_rec.ASAGENT_SOE_ID
,cur_rec.AP_SYSTEM
,cur_rec.ASSIGN_WORK_REQUEST_COMMENT
,cur_rec.BILLABLE
,cur_rec.BUILDING
,cur_rec.BUILDING_ID
,cur_rec.BUILDING_STATUS
,cur_rec.CAUSE_TYPE
,cur_rec.COMMENTS
,cur_rec.COMPLETED_BY
,cur_rec.CONTACT_EMAIL
,cur_rec.CONTACT_NAME
,cur_rec.CONTACT_PHONE
,cur_rec.CORP_CODE
,cur_rec.COST_CENTER
,cur_rec.DATE_CLOSED
,cur_rec.DATE_COMPLETED
,cur_rec.DATE_REQUESTED
,cur_rec.DATE_RESPONDED
,cur_rec.DATE_RESPONSE_ECD
,cur_rec.DATE_SCHEDULED
,cur_rec.DEFERRAL_REASON
,cur_rec.DESCRIPTION
,cur_rec.ECD
,cur_rec.FACILITY_MANAGER
,cur_rec.FLOOR
,cur_rec.GENERAL_LEDGER
,cur_rec.KIOSK_DATE_REQUESTED
,cur_rec.KIOSK_DISPATCH_CONFIRMED
,cur_rec.KIOSK_DISPATCHED
,cur_rec.LINKED_EQUIPMENT_ALIAS
,cur_rec.LINKED_EQUIPMENT_ID
,cur_rec.LINKED_EQUIPMENT_NAME
,cur_rec.ORIGINATOR_TYPE
,cur_rec.PAYMENT_TERMS
,cur_rec.PRIORITY_CODE
,cur_rec.PROBLEM_TYPE
,cur_rec.PROPERTY
,cur_rec.QUOTE_TOTAL
,cur_rec.REGION
,cur_rec.REPAIR_DEFINITIONS
,cur_rec.REPAIR_DESCRIPTION
,cur_rec.REQUESTOR
,cur_rec.REQUESTOR_COST_CENTER
,cur_rec.REQUESTOR_EMAIL
,cur_rec.REQUESTOR_NAME
,cur_rec.REQUESTOR_PHONE
,cur_rec.RESPONSE_TIME
,cur_rec.ROOM
,cur_rec.SERVICE_PROVIDER
,cur_rec.SERVICE_PROVIDER_ADDRESS
,cur_rec.SERVICE_PROVIDER_CITY
,cur_rec.SERVICE_PROVIDER_CODE
,cur_rec.SERVICE_PROVIDER_COUNTRY
,cur_rec.SERVICE_PROVIDER_CURRENCY
,cur_rec.SERVICE_PROVIDER_DESCRIPTION
,cur_rec.SERV_PROV_DISPATC_HMETHOD
,cur_rec.SERV_PROV_DOUBLE_TIME_RATE
,cur_rec.SERVICE_PROVIDER_EMAIL
,cur_rec.SERV_PROV_EMERGENCY_PHONE
,cur_rec.SERVICE_PROVIDER_FAX_NUMBER
,cur_rec.SERVICE_PROVIDER_HOME_PHONE
,cur_rec.SERVICE_PROVIDER_HOURLY_RATE
,cur_rec.SERVICE_PROVIDER_JOB_TITLE
,cur_rec.SERVICE_PROVIDER_METHOD
,cur_rec.SERVICE_PROVIDER_MOBILE_PHONE
,cur_rec.SERVICE_PROVIDER_PAGER
,cur_rec.SERVICE_PROVIDER_RATES
,cur_rec.SER_PROV_SHIFT_DIFFERENTIAL
,cur_rec.SERV_PROV_STATE_PROVINCE
,cur_rec.SERVICE_PROVIDER_STATUS
,cur_rec.SERV_PROV_WEB_SITE_ADDRESS
,cur_rec.SERVICE_PROVIDER_WORK_PHONE
,cur_rec.SERV_PROV_ZIP_POSTAL_CODE
,cur_rec.SHIFT
,cur_rec.SKILL
,cur_rec.STATUS
,cur_rec.SUBREGION
,cur_rec.TRADE
,cur_rec.VENDOR_ID
,cur_rec.VENDOR_PURCHASING_FAX
,cur_rec.VENDOR_SITECODE
,cur_rec.VENDOR_TICKET
,cur_rec.VENDOR_COMPANYNAME
,cur_rec.VIP
,cur_rec.WORK_ORDER_NO
,cur_rec.WORK_REQUEST
,cur_rec.WORK_REQUEST_CLASS
,cur_rec.WORK_TYPE
,cur_rec.WR_COST
,cur_rec.WR_DESCRIPTION
,cur_rec.WR_DISPATCH_METHOD
,cur_rec.WR_STATUS
,cur_rec.COUNTRY
,ld_curr_time
END LOOP;
COMMIT;
exception
when others then
rollback;
dbms_output.put_line('SQLCODE :'||sqlcode ||' Error :'||sqlerrm);
end work_kiosk_full;
Note : total record inserted 849000.
The same code does not work with bulk collect into caluse.
Please help me out why this is happening.
Thanks & regards
shyam~Shyam,
I agree with Billy.
Why are you not using an INSERT..SELECT ?
Also, what are you trying to achieve by
- incremental commits?
- copying data from one table to another (using expensive I/O)?
- using dynamic DML?
Most of these approaches are typically wrong - and not recommended for scalable and performant Oracle applications.I could see you using a CURSOR FOR LOOP if you were changing the data being inserted in such a way that you couldn't encapsulate the changes in a query, but you are doing a straight insert into the table from your Cursor. A much more efficient way would be to use the following modifications I made to your code example:
PROCEDURE WORK_KIOSK_FULL(AN_JOBID IN NUMBER,
AC_SQLCODE OUT VARCHAR2,
AC_SQLERRM OUT VARCHAR2) IS
BEGIN
EXECUTE IMMEDIATE 'truncate table crstools.drt_bom_work_kiosk';
/* Note: The APPEND hint forces a Direct Path INSERT (see Link below code sample) and is combined with the NOLOGGING Hint */
/* To dramtically increase performance. The Direct Path INSERT inserts records above the High-Water Mark on the table. */
INSERT /*+ APPEND NOLOGGING */ INTO CRSTOOLS.DRT_BOM_WORK_KIOSK
(JT_ID
,ACTUAL_HRS_TO_COMPLETE
,ACTUAL_HRS_TO_RESPOND
,AGENT_NAME
,ASAGENT_SOE_ID
,AP_SYSTEM
-- ,ASSIGN_WORK_REQUEST_COMMENT /* I commented out this COLUMN because it doesn't make sense to me to insert */
,BILLABLE /* a couple of space characters into a table. If the intent is to leave the column NULL */
,BUILDING /* don't include it in your INSERT statement and it will be NULL. If there is a valid reason */
,BUILDING_ID /* for inserting the spaces, then remove the "line comments" from the insert and select statments */
,BUILDING_STATUS
,CAUSE_TYPE
-- ,COMMENTS
,COMPLETED_BY
,CONTACT_EMAIL
,CONTACT_NAME
,CONTACT_PHONE
,CORP_CODE
,COST_CENTER
,DATE_CLOSED
,DATE_COMPLETED
,DATE_REQUESTED
,DATE_RESPONDED
,DATE_RESPONSE_ECD
,DATE_SCHEDULED
,DEFERRAL_REASON
,DESCRIPTION
,ECD
,FACILITY_MANAGER
,FLOOR
,GENERAL_LEDGER
-- ,KIOSK_DATE_REQUESTED
-- ,KIOSK_DISPATCH_CONFIRMED
-- ,KIOSK_DISPATCHED
,LINKED_EQUIPMENT_ALIAS
,LINKED_EQUIPMENT_ID
,LINKED_EQUIPMENT_NAME
,ORIGINATOR_TYPE
-- ,PAYMENT_TERMS
,PRIORITY_CODE
,PROBLEM_TYPE
,PROPERTY
,QUOTE_TOTAL
,REGION
,REPAIR_DEFINITIONS
,REPAIR_DESCRIPTION
,REQUESTOR
-- ,REQUESTOR_COST_CENTER
,REQUESTOR_EMAIL
,REQUESTOR_NAME
,REQUESTOR_PHONE
-- ,RESPONSE_TIME
,ROOM
,SERVICE_PROVIDER
,SERVICE_PROVIDER_ADDRESS
,SERVICE_PROVIDER_CITY
,SERVICE_PROVIDER_CODE
,SERVICE_PROVIDER_COUNTRY
,SERVICE_PROVIDER_CURRENCY
,SERVICE_PROVIDER_DESCRIPTION
,SERV_PROV_DISPATC_HMETHOD
,SERV_PROV_DOUBLE_TIME_RATE
,SERVICE_PROVIDER_EMAIL
,SERV_PROV_EMERGENCY_PHONE
,SERVICE_PROVIDER_FAX_NUMBER
,SERVICE_PROVIDER_HOME_PHONE
,SERVICE_PROVIDER_HOURLY_RATE
,SERVICE_PROVIDER_JOB_TITLE
,SERVICE_PROVIDER_METHOD
,SERVICE_PROVIDER_MOBILE_PHONE
,SERVICE_PROVIDER_PAGER
,SERVICE_PROVIDER_RATES
,SER_PROV_SHIFT_DIFFERENTIAL
,SERV_PROV_STATE_PROVINCE
,SERVICE_PROVIDER_STATUS
,SERV_PROV_WEB_SITE_ADDRESS
,SERVICE_PROVIDER_WORK_PHONE
,SERV_PROV_ZIP_POSTAL_CODE
-- ,SHIFT
-- ,SKILL
,STATUS
,SUBREGION
-- ,TRADE
,VENDOR_ID
,VENDOR_PURCHASING_FAX
,VENDOR_SITECODE
,VENDOR_TICKET
,VENDOR_COMPANYNAME
,VIP
,WORK_ORDER_NO
,WORK_REQUEST
,WORK_REQUEST_CLASS
,WORK_TYPE
-- ,WR_COST
,WR_DESCRIPTION
-- ,WR_DISPATCH_METHOD
,WR_STATUS
,COUNTRY
,CREATE_DATE
VALUES
(SELECT DISTINCT
JT.JT_ID AS JT_ID
,NVL((ROUND((JT_DATE_COMPLETED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_COMPLETE
,NVL((ROUND((JT_DATE_RESPONDED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_RESPOND
,PEO1.PEO_NAME AS AGENT_NAME
,PEO1.PEO_USER_NAME AS ASAGENT_SOE_ID
,LE.LGLENT_DESC AS AP_SYSTEM
-- ,' ' AS ASSIGN_WORK_REQUEST_COMMENT
,DECODE(JT.JT_BILL_ID,138802,'CLIENT BILLABLE'
,138803,'CONTRACTED'
,138804,'INTERNAL BILLABLE',NULL,' ') AS BILLABLE
,BL.BLDG_NAME_CC AS BUILDING
,BL.BLDG_ID_LS AS BUILDING_ID
,DECODE(BL.BLDG_ACTIVE_CC, 'Y', 'ACTIVE', 'INACTIVE') AS BUILDING_STATUS
,DECODE(JT.JT_WRK_CAUSE_ID,141521,'STANDARD WEAR AND TEAR'
,141522,'NEGLIGENCE'
,141523,'ACCIDENTAL'
,141524,'MECHANICAL MALFUNCTION'
,141525,'OVERSIGHT'
,141526,'VANDAL'
,141527,'STANDARD'
,141528,'PROJECT WORK'
,6058229,'TEST',NULL,' ') AS CAUSE_TYPE
-- ,' ' AS COMMENTS
,PEO3.PEO_NAME AS COMPLETED_BY
,JT.JT_REQUESTOR_EMAIL AS CONTACT_EMAIL
,JT.JT_REQUESTOR_NAME_FIRST || ' ' ||JT.JT_REQUESTOR_NAME_LAST AS CONTACT_NAME
,JT.JT_REQUESTOR_PHONE AS CONTACT_PHONE
,CC.CSTCTRCD_APCODE AS CORP_CODE
,CC.CSTCTRCD_CODE AS COST_CENTER
,JT.JT_DATE_CLOSED AS DATE_CLOSED
,JT.JT_DATE_COMPLETED AS DATE_COMPLETED
,JT.JT_DATE_REQUESTED AS DATE_REQUESTED
,JT.JT_DATE_RESPONDED AS DATE_RESPONDED
,JT.JT_DATE_RESPONSE_ECD AS DATE_RESPONSE_ECD
,JT.JT_DATE_SCHEDULED AS DATE_SCHEDULED
,DECODE(JT.JT_DEF_ID,139949,'WTG VENDOR RESPONSE'
,139950,'WAITING ON PARTS'
,139951,'LABOR AVAILABILITY'
,139952,'DEFERRED- HI PRI WORK'
,139953,'WTG APPROVAL'
,139954,'FUNDING REQUIRED'
,139955,'ACCESS DENIED'
,139956,'WTG MATERIAL',NULL,' ') AS DEFERRAL_REASON
,JT.JT_DESCRIPTION AS DESCRIPTION
,JT.JT_DATE_RESCHED_ECD AS ECD
,FMG.FACILITY_MANAGER AS FACILITY_MANAGER
,FL.FLOORS_TEXT AS FLOOR
,GL.GENLED_DESC AS GENERAL_LEDGER
-- ,' ' AS KIOSK_DATE_REQUESTED
-- ,' ' AS KIOSK_DISPATCH_CONFIRMED
-- ,' ' AS KIOSK_DISPATCHED
,EQP.EQUIP_CUSTOMER_CODE AS LINKED_EQUIPMENT_ALIAS
,EQP.EQUIP_ID AS LINKED_EQUIPMENT_ID
,EQP.EQUIP_TEXT AS LINKED_EQUIPMENT_NAME
,DECODE(JT_ORIGINATOR_TYPE_ID,1000,'PROJECT MOVE REQUEST'
,138834,'CUSTOMER INITIATED CORRECTION'
,138835,'CUSTOMER INITIATED REQUEST'
,138836,'CORRECTIVE MAINTENANCE'
,138837,'CONFERENCE ROOM BOOKING'
,138838,'PROJECT INITIATED REQUEST'
,138839,'PLANNED PREVENTIVE MAINTENANCE'
,138840,'SELF INITATED REQUEST',NULL,' ') AS ORIGINATOR_TYPE
-- ,' ' AS PAYMENT_TERMS
,PRIORITY_TEXT AS PRIORITY_CODE
,SWOTY.SWORKTYPE_TEXT AS PROBLEM_TYPE
,PROP.PROPERTY_NAME_CC AS PROPERTY
,JT.JT_COST_QUOTE_TOTAL AS QUOTE_TOTAL
,PAR.LEVELS_NAME AS REGION
,DECODE(JT.JT_REPDEF_ID,141534,'ADJUSTED SETTING'
,141535,'TRAINING FOR END'
,141536,'NEW REQUEST'
,141537,'NO REPAIR REQUIR'
,141538,'REPLACED PARTS'
,141539,'REPLACE EQUIPMEN'
,1000699,'NEW REQUEST',NULL,' ') AS REPAIR_DEFINITIONS
,JT.JT_REPAIRDESC AS REPAIR_DESCRIPTION
,JT.JT_REQUESTOR AS REQUESTOR
-- ,' ' AS REQUESTOR_COST_CENTER
,JT.JT_REQUESTOR_EMAIL AS REQUESTOR_EMAIL
,JT.JT_REQUESTOR_NAME_FIRST AS REQUESTOR_NAME
,JT.JT_REQUESTOR_PHONE AS REQUESTOR_PHONE
-- ,' ' AS RESPONSE_TIME
,RM.ROOM_NAME_CC AS ROOM
,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER
,P1.PEO_ADDRESS_1 AS SERVICE_PROVIDER_ADDRESS
,PEOCITY.CITY_TEXT SERVICE_PROVIDER_CITY
,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER_CODE
,PEOCITY.CITY_COUNTRY_NAME AS SERVICE_PROVIDER_COUNTRY
,PEOCUR.CURRENCY_TEXT AS SERVICE_PROVIDER_CURRENCY
,P1.PEO_NAME AS SERVICE_PROVIDER_DESCRIPTION
,P1.PEO_DISPATCH_METHOD AS SERV_PROV_DISPATC_HMETHOD
,P1.PEO_RATE_DOUBLE AS SERV_PROV_DOUBLE_TIME_RATE
,P1.PEO_EMAIL AS SERVICE_PROVIDER_EMAIL
,P1.PEO_EMERGENCY_PHONE AS SERV_PROV_EMERGENCY_PHONE
,P1.PEO_FAX AS SERVICE_PROVIDER_FAX_NUMBER
,P1.PEO_HOME_PHONE AS SERVICE_PROVIDER_HOME_PHONE
,P1.PEO_RATE_HOURLY AS SERVICE_PROVIDER_HOURLY_RATE
,P1.PEO_TITLE AS SERVICE_PROVIDER_JOB_TITLE
,P1.PEO_METHOD_ID AS SERVICE_PROVIDER_METHOD
,P1.PEO_CELL_PHONE AS SERVICE_PROVIDER_MOBILE_PHONE
,P1.PEO_PAGER AS SERVICE_PROVIDER_PAGER
,P1.PEO_RATE_DIFFERENTIAL AS SERVICE_PROVIDER_RATES
,P1.PEO_RATE_DIFFERENTIAL AS SER_PROV_SHIFT_DIFFERENTIAL
,PEOCITY.CITY_STATE_PROV_TEXT AS SERV_PROV_STATE_PROVINCE
,DECODE(P1.PEO_ACTIVE, 'Y', 'ACTIVE', 'INACTIVE') AS SERVICE_PROVIDER_STATUS
,P1.PEO_URL AS SERV_PROV_WEB_SITE_ADDRESS
,P1.PEO_PHONE AS SERVICE_PROVIDER_WORK_PHONE
,P1.PEO_POSTAL_CODE AS SERV_PROV_ZIP_POSTAL_CODE
-- ,' ' AS SHIFT
-- ,' ' AS SKILL
,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW'
,138814,'PENDING'
,138815,'OPEN'
,138816,'COMPLETED'
,138817,'CLOSED'
,138818,'CANCELLED',NULL,' ') AS STATUS
,LEV.LEVELS_NAME AS SUBREGION
-- ,' ' AS TRADE
,P1.PEO_LS_INTERFACE_CODE1 AS VENDOR_ID
,P1.PEO_FAX AS VENDOR_PURCHASING_FAX
,P1.PEO_VENDOR_SITE_CODE AS VENDOR_SITECODE
,JT.JT_ID AS VENDOR_TICKET
,P1.PEO_NAME AS VENDOR_COMPANYNAME
,JT.JT_REQUESTOR_VIP AS VIP
,WO.WO_ID AS WORK_ORDER_NO
,JT.JT_ID AS WORK_REQUEST
,JT.JT_CLASS_ID AS WORK_REQUEST_CLASS
,WOTY.WORKTYPE_TEXT AS WORK_TYPE
-- ,' ' AS WR_COST
,JT.JT_DESCRIPTION AS WR_DESCRIPTION
-- ,' ' AS WR_DISPATCH_METHOD
,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW'
,138814,'PENDING'
,138815,'OPEN'
,138816,'COMPLETED'
,138817,'CLOSED'
,138818,'CANCELLED',NULL,' ') AS WR_STATUS
,CTRY.COUNTRY_NAME AS COUNTRY
,SYSDATE --LD_CURR_TIME
FROM CITI.JOBTICKET JT,
CITI.PROPERTY PROP,
CITI.BLDG BL,
CITI.BLDG_LEVELS BLDGLVL,
CITI.LEVELS LEV,
CITI.LEVELS PAR,
(SELECT CRSTOOLS.STRAGG(PEO_NAME) FACILITY_MANAGER,
BLDGCON_BLDG_ID
FROM CITI.BLDG_CONTACTS, CITI.PEOPLE
WHERE BLDGCON_PEO_ID = PEO_ID
AND BLDGCON_CONTYPE_ID IN (40181, 10142)
GROUP BY BLDGCON_BLDG_ID) FMG,
CITI.FLOORS FL,
CITI.ROOM RM,
CITI.GENERAL_LEDGER GL,
CITI.LEGAL_ENTITY LE,
CITI.COST_CENTER_CODES CC,
CITI.EQUIPMENT EQP,
CITI.WORKTYPE WOTY,
CITI.SUBWORKTYPE SWOTY,
CITI.WORK_ORDER WO,
CITI.JT_WORKERS JTWO,
CITI.PRIORITY,
CITI.COUNTRY CTRY,
CITI.PEOPLE P1,
CITI.PEOPLE PEO3,
CITI.PEOPLE PEO1,
CITI.CITY PEOCITY,
CITI.CURRENCY PEOCUR
WHERE JT.JT_BLDG_ID = BL.BLDG_ID
AND BL.BLDG_ID = BLDGLVL.BLDG_LEVELS_BLDG_ID
AND BLDGLVL.BLDG_LEVELS_LEVELS_ID = LEV.LEVELS_ID
AND LEV.LEVELS_PARENT = PAR.LEVELS_ID(+)
AND PROP.PROPERTY_ID = BL.BLDG_PROPERTY_ID
AND BL.BLDG_ACTIVE_LS = 'N'
AND JT.JT_FLOORS_ID = FL.FLOORS_ID(+)
AND JT.JT_ROOM_ID = RM.ROOM_ID(+)
AND JT.JT_BLDG_ID = FMG.BLDGCON_BLDG_ID(+)
AND JT.JT_GENLED_ID = GL.GENLED_ID(+)
AND GL.GENLED_LGLENT_ID = LE.LGLENT_ID(+)
AND JT.JT_CSTCTRCD_ID = CC.CSTCTRCD_ID(+)
AND JT.JT_EQUIP_ID = EQP.EQUIP_ID(+)
AND JT.JT_ID = JTWO.JTW_JT_ID(+)
AND JT.JT_WORKTYPE_ID = WOTY.WORKTYPE_ID(+)
AND JT.JT_SWORKTYPE_ID = SWOTY.SWORKTYPE_ID(+)
AND JT.JT_WO_ID = WO.WO_ID
AND JT.JT_PRIORITY_ID = PRIORITY_ID(+)
--AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12)
AND JT.JT_LAST_UPDATE >= ADD_MONTHS(LD_CURR_TIME, -12)
AND BL.BLDG_COUNTRY_ID = CTRY.COUNTRY_ID
AND JTWO.JTW_PEO_ID = P1.PEO_ID(+)
AND P1.PEO_CITY_ID = PEOCITY.CITY_ID(+)
AND JT.JT_COMPLETED_BY_PEO_ID = PEO3.PEO_ID(+)
AND P1.PEO_RATE_CURRENCY_ID = PEOCUR.CURRENCY_ID(+)
AND JT.JT_AGENT_PEO_ID = PEO1.PEO_ID(+)
COMMIT;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
DBMS_OUTPUT.PUT_LINE('SQLCODE :' || SQLCODE || ' Error :' || SQLERRM);
END WORK_KIOSK_FULL;Here's the link for infor on the [Oracle Direct-Path INSERT |http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c21dlins.htm#10778].
Also, if you are truly intent on using a CURSOR FOR LOOP with the BULK COLLECT, I suggest you read Steven Feuerstein's article [PL/SQL Practices: On BULK COLLECT |http://www.oracle.com/technology/oramag/oracle/08-mar/o28plsql.html].
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly -
My Xlite 4.0 software does not work with Jetpack but does work with droid hotspot can this be fixed?
My Xlite 4.0 software does not work with Jetpack but does work with droidx hotspot can this be fixed? I have attached a packet capture for packets from DROIDX with android 2.3.4 marked as XliteWith3G.cap and a packet capture for Xlite with the Jet pack XliteWith4G.cap obiviously same packets coming from Xlite different results depending on WiFi connection.
Hi Vidya,
Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
Regards,
Hilary -
adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Flash player does not work with Ie or Firefox with win 8.1?
Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11 -
Bought iPhone as "SIM-Free", but it not work with my local SIM card
I have bought iPhone Serial No: 82108W75A4T in Canada as "SIM-Free", but it not work with my local SIM (Orange in Israel) card. Where to check: it is or not Factory Unlocked or have any hardware/software problems or have carrier ("adhered" any phone company)
In the local Orange: They tried with them SIM, the same negative result.
I have addressed to Canadien phone wireless carriers.
From some [Rogers'] has already received the answer:
... have checked our system and did not find your iPhone listed... Please contact Apple... -
27" TFT TV not working with my mac mini
My brand new mac mini does not work with my 27" TFT TV (D-Boss) using the DVI connection. The mac mini works fine if connected to a 17" or 20" TFT display, but the screen of my TV is black and I get the error message "out of range" (strange with digital). The TV is working with my Windows laptop (analog and digital). I really have no idea where the problem is. Somebody can help me?
Thanks
-Linus10.9.1
This is the pop up message that I get when I try to load the set up file from the disc.
"You can’t open the application “HP Installer” because PowerPC applications are no longer supported."
Thanks for your help -
My apple ID is not working with my apple store
My apple ID is not working with my apple store
I have the exact same problem as "Jan Olsen 1"
I sent them feedback:
"I was given a $25 iTunes gift card.
When trying to log on to my account, my password didn't work (though I entered the correct password THREE TIMES).
I requested help changing the password through an e-mail. Went through the process, changed the password.
I successfully logged on to my account and entered the gift card information and was given a $25 credit.
When I tried to buy mp3s, I was asked to enter my password - AGAIN.
I got one of the following messages each time I tried to enter my NEW password:
'We could not complete your iTunes Store request. An unknown error occurred (5002).
There was an error in the iTunes Store. Please try again later.'
or
'Verification is required.
You must enter your AppleID and password, click Billing Info, and verify your payment information in order to make purchases.
The Apple ID you entered couldn't be found or your password was incorrect. Please try again.'
Don't know where to go from here."
And then, just to log on to this forum, I had to enter my AppleID TWICE! Once, then again to verify my AppleID!
Ridiculous! Frustrating! -
Modifer keys do not work with mouse in Illustrator
Below is a copy of a bug report I just submitted to Adobe. I don't suppose any users have run across this and found a solution or workaround?
I found someone else with this problem in an archived topic thread, but the only response that poor fellow got was an accusation of not following instructions (His problem wasn't user error, BTW).
Thanks
******BUG******
Concise problem statement:
Modifer keys do not work with mouse: For example, free transform or rotate behaviors that require "Click-Ctrl" .
Steps to reproduce bug:
1. select object
2. select free transform tool
3. left click (without releasing) a corner of the bounding box.
4. start dragging
5. press ctrl
Results:
object behaves as though the ctrl key was not pressed. i.e. the cursor does not change shape and the object scales rather than distorts.
Expected results: The cursor should change shape as the ctrl key is pressed and the object should distort rather than scale.
Additional information: This behavior is intermittent. Occasionally Illustrator recognizes the "Click-Ctrl" combination and behaves exactly as the help file predicts it will. The cursor changes shape and the object distorts rather than scales. I can offer no rhyme or reason for when Illustrator will behave as advertised and when it will ignore the modifier keys.
The example above involves the free transform tool, but the problem occurs just as often with other tool behaviors that require a modifier key + mouse combination.
Primarily using Wacom Intuos3 tablet. (with latest drivers), but have also tried combinations with microsoft mouse or both mice installed.
Also, immediately after an occurrence Illustrator bug, left AI open, went to a different app that uses mouse+modifier (Ctrl+Click). That different app recognizes Ctrl+Click with no problems whatsoever.Thanks Guys,
Good to know it's working for you. I guess that's the nature of intermittent bugs. Of course, Adobe's bug report form has a field for version, which I, of course, filled in. Sorry I didn't add it to this post. I'm using the latest version CS3 v13.0.2.
Stephen,
Sorry I was not more clear when I said, "For example, ...". I was talking about the modifier keys not working with several different tools. The Free Transform tool advertises functionality that is supposed to work with a "Click (down, but don't release)then hold down Ctrl" combination. The Rotate tool advertises a behavior that is supposed to work with an "Alt-Click" combination. These are just 2 examples of the modifier keys not working. I focused primarily on one example in the bug report(ctrl after and in addition to click in the free transform tool, not alt-click in the rotate tool).
Here is what I expect(quoted from Adobe's CS3 help file)
(From the "Distort Objects with the Free transform tool" help topic)
"Select one or more objects.
Select the Free Transform tool .
Start dragging a corner handle on the bounding box (not a side handle), and then do one of the following:
Hold down Ctrl (Windows) or Command (Mac OS) until the selection is at the desired level of distortion.
Hold down Shift+Alt+Ctrl (Windows) or Shift+Option+Command (Mac OS) to distort in perspective."
(from the "Rotate an object by a specific angle" help topic:)
You can control the exact angle of rotation with the Rotate command.
Select one or more objects.
"Do one of the following:
To rotate around the center point, choose Object > Transform > Rotate, or double-click the Rotate tool.
To rotate around a different reference point, select the Rotate tool. Then Alt‑click (Windows) or Option‑click (Mac OS) where you want the reference point to be in the document window.
Enter the rotation angle in the Angle text box...."
These Tool based mouse-key combinations do occasionally work as they are supposed to, so I know what the expected results are supposed to look like, but whether they work or not appears to depend on the phase of the moon, the day of the week, and the color of the president's underwear.
Other non-tool based mouse-key combinations in Illustrator work consistently all the time - Ctrl-A for Select All as just one example that always works.
Thanks Again -
Applet does not work with a proxy server.URgent
Hi,
I have an asp page being hosted from a IIS server.
The asp page has an applet which gets data from a server side component which is hosted as a service on the server side.For connection to the server I am using URLConnection object and trying to connect over a TCP connection.
The problem occurs when I use an proxy in the middle.
I have changed the browser settings to include the proxy.
The following is the error I recieve:
Full :http://172.25.11.63:4590/
<-------------------------------->
OPening input stream
in Run ::::
ERROR: Created data socket but can't open stream on
it.172.25.11.63:4590//
172.25.11.63:4590//
java.io.FileNotFoundException: 172.25.11.63:4590//
at com/ms/net/wininet/http/HttpInputStream.connect
at com/ms/net/wininet/http/HttpInputStream.<init>
at com/ms/net/wininet/http/HttpURLConnection.createInputStream
at com/ms/net/wininet/WininetURLConnection.getInputStream
at TalkClientApplet.rendezvous
at TalkClientApplet.actionPerformed1
at TalkClientApplet.start
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
...Disconnecting.
Following is my code.
url = new URL("http://" + host +":"+i);
urlconnection = url.openConnection();
urlconnection.setDoOutput(true);
urlconnection.setDoInput(true);
System.out.println("Successfully opened the URL connection at " + "http://" + host + ":" + i );
System.out.println ("Protocol: " + url.getProtocol());
System.out.println ("Host :" + url.getHost());
System.out.println ("Port :" + url.getPort());
System.out.println ("File :" + url.getFile() );
System.out.println ("Full :" + url.toExternalForm());
System.out.println ("<-------------------------------->");
os = new BufferedWriter(new OutputStreamWriter(urlconnection.getOutputStream()));
System.out.println("OPening input stream ");
// is = new DataInputStream(urlconnection.getInputStream());
System.out.println(urlconnection.getInputStream());
is = new DataInputStream(urlconnection.getInputStream());
The exact place where I get the error is whn i call URLConnection.openInputStream().
Usually this error comes with a malformed URL.But the same code words without a proxy.Also I am not making any changes to my code in both scenarios that is with or without proxy.
Please help.This is urgent and a showstopperThanks for your nice solution, but unfortunatelly it does not work with lines longer than 100 chars with Netscape. It works fine with IE and appletviewer too.
Example:
I use this code:
try {
URL url = new URL(protocol,hostName,portNumber,URLstring);
InputStream in = url.openStream();
BufferedInputStream bis = new BufferedInputStream(in);
StringBuffer input = new StringBuffer(60);
int c;
while ((c = bis.read()) != -1){
System.out.print((char)c);
input.append((char)c);
bis.close();
dataFromServer = input.toString();
catch(Exception ex) {
ex.printStackTrace();
}I use input file test.html with exactly 100 chars ('a')
Netscape Java Console:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadataFromServer : aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaI use input file test.html with exactly 101 chars ('a')
Netscape Java Console:
?JL?yyxk?cedataFromServer : ?
Maybe you are looking for
-
Cannot find config.js file in user folder
Dear All, I could not find config.js in user java script folder. I used app.getPath("user", "javascript"); function to find the user folder and it contains glob.js and glob.settings.js file. Where should i find Config.js file to execute priviledged
-
How to install Page Rank Checker for FF 7.0.1 ?
This is my first time that am using this FF 7.0.1 I am in SEO field so i need some of the add-on for my browser. I always use FF because this is only comfortable for my work. I have added some add-on like firebug, Web Clipper etc.. Now i need PR chec
-
Hi all, we are created a business partner with role sold to party (US salea organization) in CRM, for the same business partner we are created quotation in CRM, but in quotation address view tab we are changed the currency as **CAD instead of USD.**
-
Core i5 or Core i7: Is There a Real-World Noticeable Difference?
Hello, Please let me know if there is any noticeable difference between these two processors. I'm a hobbyist upgrading to a new iMac and would rather spend money on new camera gear and external drives than specs that may not benefit me in the long ru
-
Help to restore my iphone and it will not write error 1002
help to restore my iphone 3gs and it will not write error 1002