Question in OCS Installation & Configutaion

Login in to single sing-on server page (http://host:port/pls/orasso),
Question 1:
After click ¡®login¡¯ button on the top right of the page, following message is shown:
Error: You cannot login because there is no configuration information stored in-the enabler configuration table (wwc-41439).
Question 2:
After click partner application ¨C The sso server (orasso), the webpage cannot be displayed.

More...
Question 1:
Login in oracle internet directory self service console (http://host:port/oiddas)
Click login button, error message as follows:
The server encountered an internal error or misconfiguration and was unable to complete you request.
Additionally, a 500 internal server error was encountered while trying to use an errordocument to handle the request.
Click configure button, the following message was shown:
No configuration rights
Can not execute any configuration task
Question 2:
Our java version is 1.4.1, is this version suitable for OCS?

Similar Messages

Question concerning Tiger installation

Hello,
currently I have OS X 10.2.8 and most recently I bought tiger...I have a question concerning the installation process. I inserted the disk and completed the first couple of installation steps and when I get to the 3rd step to choose a hard dive to install the operating system on, my slave drive is the only option that appears, not my mac hd drive that already has the current operating system on it...should i install tiger on my slave drive or is there a way to get my home drive as an option?? I have more available space on my mac hd drive and would say that it is the main drive that contains all the information to run this computer....
any info on this matter would be greatly appreciated.....peter
Dual 1.25 GHz G4 Mac OS X (10.4.3)

when selecting the startup disk, should there always be a ? mark on the drive icon? Well, i selected the mac osx2.8 system and will try the process again.....thanks....
Dual 1.25 GHz G4 Mac OS X (10.2.x)

Question regarding the installation of a J2EE 6.40 Add-in

Hi all,
I would like to install a J2EE engine on a test instance of ECC 5.0 and have a few questions regarding the installation...
Do I have to use the MASTER CD to first install the J2EE engine (Support Package 0) and then apply the latest support packages found on the SAP Marketplace?
Or should be able to directly install the J2EE Add-In by using the latest support packages found on the SAP Marketplace?
Best regards,
Xavier Vermaut

Thanks Bhavik for your reply,
That's what I actually thought but I get the following problem... Here's what I wrote into my customer message... I am still waiting for an answer and would like to get this solved ASAP
Dear SAP,
We would like to install the J2EE 6.40 Add-In on our ECC 5.0 instance
(TST) but get the following error message at the very beginning of the
installation
> Cannot find an installed ABAP system, which is a prerequisite for a
> J2EE Add-In installation. The installation cannot continue.
We checked the installation logs (sapinst_dev.log) and found the
following :
> Found these instances:
> sid: MGR, number: 00, name: DVEBMGS00, host: erpqs1a
> sid: TST, number: 10, name: DVEBMGS10, host: erpqs1a
Why does the installation say that it can not find any ABAP systems when
having previously found the 2 different instances running on this
server?
Would this problem be related to the fact that we have two instances on
this server?
Please find hereunder the way we performed this installation :
01) Download of the 4 different parts of SAP J2EE Engine 6.40 SP 10
     (Solaris 10 - Oracle)
     Part I   : SAPINST10_0-20000121.SAR         (Solaris 64)
     Part II : CTRLORA10_0-20000121.SAR         (Solaris 64)
     Part III : J2EERTOS10_0-20000121.SAR        (Solaris 64)
     Part IV : J2EERT10_0-10001982.SAR          (OS Independant)
02) Extract these 4 archives into /install/J2EE_640
03) Check Java Version and Environment Variables
04) Check Solaris Pre-Requisites
05) Adapt "product.xml" as specified in OSS Note 697535 (IGS)
06) Log in as 'root'
07) Set DISPLAY environment Variable
08) Move to the Installation directory
      ( /install/J2EE_640/SAPINST-CD/SAPINST/UNIX/SUNOS_64 )
09) ./sapinst
10) In the 'Welcome to Netweaver Installation' screen, select
      => Dialog Instance Finalization
Any idea how to get this solved?
Best regards,
Xavier Vermaut
Message was edited by: Xavier Vermaut

A question about the Installation process in general

Hey guys, a general question to the installation process.
The following scenario:
I install a programme on my macbook pro and don't tick all possible installation options (like additional content).
Afterwards I change my mind and want to install the optional content.
So I run the installation programme again and now the question:
If I install the additional content AND the mainprogramme again is the main programme going to be overwritten or am I going to have the mainprogramme twice on my system from now on
Thanks in advance for you help, folks!

If you do a Unicode conversion (no matter in a UC & CU scenario or as a single project) the target system must be empty - means, you will create a new database and load it with the content you exported.
You can't install the export into your already existing database with the same name.
Markus

A question about Maveric installer created on a USB key? Can this be used multiple times?

I have downloaded Maveric on a Mac Book Pro.
Then without installing utilising Diskmaker X as suggested using a USB key have created Maveric installer.
My question is that I wish to know if the above created USB installer could be used in more than once to install Maveric?
If I put that above created USB on a Mac Book Air and do the install, and could I use the same USB installer on a second Mac Book Air to install Maveric OS?
This will help not needing to use broadband downloads where restrictions apply?
Regards

Thank you Lanny.
That is great to know about Mavericks.
Regards

Basic questions about JRE installation

I am using NSIS to make a installer, which insalls the JRE 1.5, JMF, Javamp3, then our own software packages.....
Firstly I have some basic question about the general installatio/deinstallation.
1 Why sometimes is it required to reboot computer for the installed software to take effect, e.g.
JRE 1.5. If not, what doest NOT take effect? (Actually in many cases, it seems to work even if not reboot the computer).
Regarding the JRE 1.5,
I am wondering:
1 where is the registry entry written in windows?
2 how to make the JRE installation process silent?
Thanks !

Just click on this link http://mindprod.com/jgloss/registry.html.

OCS installation default namespace issue ?

While installing OCS, I am getting stuck at the dialog box which specifies the suggested namespace as
dc=hostname, dc=com
The installer program is coming back with the following error:
===
The value you have entered for the Global Database Name must include a domain.
Please reenter the global database name
===
Am I missing any pre-requisites?
Any input is appreciated !!!
Thanks

Hi!
During the installation you are asked about the name of the database and the global database name. Normally you supply these values in the foloowing format:
Database Name (aka SID): orcl, csdb, mysid
Global Database Name (aka service name): orcl.us.oracle.com, csdb.acme.com, mysid.mijnbedrijf.nl
Try to provide these values (for your environment) and everything should work.
cu
Andreas

Some small questions for iMS installation

I am preparing to install iMS 5.2 with existing configuration and uer and groups iDS 5.1 on Solaris 9. Some issues confused me, please help, thanks in advance.
Q1. By the checking of iMS installation doc, Question 34 needs "Administration Server Port". Is it same as the port of my exsiting Administration server of iDS 5.1?
Q2. Now I want to set this as test env but my dc (dc=cig,dc=tcs,dc=com) is real, that means that mail server with suffix "cig.tcs.com" already has been setup and worked well, and all servers are on the same network.
I am not sure if I should change the dc to avoid any confusion after installing iMS?

I've done it before which upgrade the iMS 5.1 to iMS 5.2...
steps...
uninstall the iMS 5.1...... using the uninstall....
second install the iMS 5.2
remain the iDS......
then... issue the ./imsimta dirsync -F
done....

Disable install questions during remote installation of Adobe Pro 9

I am attempting to perform a remote installation of Adobe Pro 9 on various devices located at different sites. By using the Adobe Customization 9 I have configured the installation as I need. The one issue that I can not seem to find a resolution for is: how do I disable the installation questions popping up on the screen when I am conducting a silent installation? I'm assuming there is an option within the Direct Editor to perform this action. Where is it located?

Install rollback and Shared Technologies | Windows

Some basic question about SCM Installation

Hi Folks,
Could you please advice me about some basic questions about SCM and its installation -
Q1. Do I need to have an R/3 System to be able to practice OR demo the SCM system?
Q2. If, yes, which version of SCM is compatible with the ECC 5.0?
Q3. What are the basic requirements to install SCM (version compatible with ECC 5.0) and ECC on a oracle db and windows OS?
Q4. Does SCM have APO and BI as an inbuilt functionality OR does the user need to purchase these as an Add-On?
I know these are some basic questions, but these will help me give me a direction.
With best wishes,
Krishna

Hello Krishna -
Q1. Do I need to have an R/3 System to be able to practice OR demo the SCM system?
---> There are various Modules in SCM Like APO (Sub Modules DP (stand alone), SNP Needs Master data from R/3 and has to pass on transactional Data to R/3, PPDS same as SNP, GATP same as SNP), ICH needs Data from R/3 to work with. Core Interface (CIF) connects R/3 to APO for transferring data.
Q2. If, yes, which version of SCM is compatible with the ECC 5.0?
-->For thorough understanding explore the following links
http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Q3. What are the basic requirements to install SCM (version compatible with ECC 5.0) and ECC on a oracle db and windows OS?
-->Refer Above
Q4. Does SCM have APO and BI as an inbuilt functionality OR does the user need to purchase these as an Add-On?
--> APO comes with a small BI inbuilt functionality. you can only perform certain functions using that BI.
Hope this helps.
Regards,
Suresh Garg

Questions regarding Portal Installation

Hi Experts,
I want to install portal and I have following questions;
1- We are on ECC 6.0 & I want to install portal. Can I install it on separate machine? What are the recommendations, how it should be installed. I mean on ECC app server or on different machine?
2- I want to install the original corporate version not sneak preview which expires after 90 days. Having said that, Do we need to purchase separate portal installation CD's or it comes with standard ECC 6.0.
3- Having ECC 6.0, what else we need to install for getting the portal in running shape like java stack etc..?
Your help will be highly appreciated.
Thanks,

Hi,
> 1- We are on ECC 6.0 & I want to install portal. Can I install it on separate machine? What are the recommendations, how it >should be installed. I mean on ECC app server or on different machine?
>
It depends upon how much resources machine have. If you have sufficient resources then you can install on same machine. But I would prefer to install Portal on separate machine as Java is resource intensive.
> 2- I want to install the original corporate version not sneak preview which expires after 90 days. Having said that, Do we >need to purchase separate portal installation CD's or it comes with standard ECC 6.0.
>
For Portal you need to have separate license with SAP unless and until you are not installing ECC 6.0 dual stack system. Also, from Business Suite 7, you cannot install dual stack system.
> 3- Having ECC 6.0, what else we need to install for getting the portal in running shape like java stack etc..?
>
If you are installing portal then Java stack will come in it. I would suggest you to read installation guide.
Thanks
Sunny

Flashing Folder and Question Mark, no installation disc

Yesterday, Safari froze up while I was it which I have never had happen before. So, I manually shut my Macbook off and tried to restart. When I did so, I received a gray screen with a flashing folder and question mark. From my research, I have found that usually this means that my laptop can't find the operating system and this issue can usually be resolved by inserting the installation disc. Problem is, I bought my Macbook secondhand and never got an installation disc. Does anyone know of a way around this issue? Or if buying the Snow Leopard upgrade for $30 instead of buying a whole new package for about a hundred dollars more might resolve this issue?
Thanks so much,
Kristin

Yes, quite a quandary. You have some options:
1. Call AppleCare and ask for customer support. You can order replacement discs for the model you have.
2. Purchase an OS X retail installer suitable for your model, like Snow Leopard, that you can use to determine if you can repair the hard drive or will nee to reinstall OS X. If the latter and you are using Snow Leopard, then you just install it. The installer will determine whether to upgrade or not automatically. As long as your drive is OK Snow Leopard will not erase the drive so all your files are safe. If you use an earlier version of OS X then you want to choose the Archive and Install option. See the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

A few questions about the installation

Hi,
Our block of flats has just been upgraded to Infinity - I think it's likely to be FTTP as we have a fibre optic 'pullback' cable running around each floor outside the flats.
We have not yet been able to order the service but I have a few questions anyway. Apologies for the lengthy nature but my partner and I are trying to explore all options with regards to installation.
As it's likely FTTP do we need to have the modem in the same place as the existing master socket. Reading this it seems that we could have the modem located in a different place and have some Cat5e/Cat6 cables run prior to installation to link the modem to the router (which would remain near the master socket). Is that something that's feasible?
If we have to route the fibre cable through to the lounge, what lengths will the engineer go to in order to aid a discrete run? Can they do things like routing through drywall voids where accessible without structural work beyond drilling a hole? Ideally we would need to drill some holes anyway, are they happy doing more than just the one to bring the cable into the flat?
If the engineer is not able to be overtly flexible, can additional cabling be left in a loop with a view to us conducting future work, things like burying the cable into the drywall? Can the cable even be moved once it's connected to the modem? Does moving the modem cost?
Hopefully someone will be able to advise. It's been a long battle to get the infrastructure put into place and I'm looking forward to getting access to Infinity as soon as possible
Thank you for any replies

My understanding is that you don't even need a phone line for fibre therefore you don't need a master socket. That being the case, if you do have a phone line then master socket does not need to be anywhere near the fibre modem. You will find that usually you will have to have a phone line installed as part of the package.
EDIT: You should run Ethernet cable from where the modem will be placed to where you want the homehub/router sited.

MacBook Pro flashing folder with question mark - NO installation/setup disks

I recently bought my Macbook Pro in August of 2012 and I have noticed that the newer MacBooks do NOT come with additonal installation disks or anything of the sort. I started up my Mac today and was faced with the flashing folder with a question mark on it. I already know what this is implying and I have tried literally everything to fix it. It does not recognize command-R so I cannot choose HD recovery and when I try to perform "first aid" on it, it does not recognize my disk-0 and when I try to verify or repair, it does not let me. All options are greyed out. I have tried resetting the PRAM but that does not do anything either and I cannot boot it to single user mode. Please help. The last thing I want to do is bring it in for repairs as it is my last week of classes in university and I absolutely need my laptop for school work.

I recently bought my Macbook Pro in August of 2012 and I have noticed that the newer MacBooks do NOT come with additonal installation disks or anything of the sort. I started up my Mac today and was faced with the flashing folder with a question mark on it. I already know what this is implying and I have tried literally everything to fix it. It does not recognize command-R so I cannot choose HD recovery and when I try to perform "first aid" on it, it does not recognize my disk-0 and when I try to verify or repair, it does not let me. All options are greyed out. I have tried resetting the PRAM but that does not do anything either and I cannot boot it to single user mode. Please help. The last thing I want to do is bring it in for repairs as it is my last week of classes in university and I absolutely need my laptop for school work.

Questions on OCS and workflow

I am wondering whether I can configure the following:
- Can I have multiple views? Example, view documents by Author, Project, Category? Can I customize document
views?
- Can I control access rights on a single document?
- Can I monitor or extract a report on how often a document is accessed?
In addition, I have the following problems with OCS Workflow:
- The Workflow has no default email notification. Documentations indicated that Email Notification has to be configured to work with SendMail. Can Email notification be configured with OCS Mail instead?
It does not make sense to use SendMail instead of OCS Mail.
- Document can be viewed by Workspace members once it is uploaded. What is the purpose of workflow then?
- Document has to be manually submitted for review to initiate a Workflow process. Can this be performed automatically?
- WorkFlow approver is defined by the user. It should have predefined approvers.
- In Workflow notification, Notification Detail provides the URL but does not have a URL link back to the document. In this case, the review process is manual because the approver does not have an easy
way to preview the document.
Are my comments correct? Are there any workarounds?

Roger,
1) The default SPINCOUNT value is 0 (no spinning) for all platforms that are supported today. (At one time we had a default value of 5000 for Sequent hardware, but it has been many years since we supported that platform.) The SPINCOUNT value that will work best for any application depends on many factors, including the number of CPUs on the machine, the hardware platform, and the indvidual application. SPINCOUNT will only be useful when the machine has more than one CPU.
2) /Q logs Q_CAT:1447 after 50 unsuccessful attempts to obtain the semaphore when the semaphore has never been released and reobtained by a different process or the same process during that period. The Access Control List code uses the same rule for logging LIBTUX_CAT:1511. If TMSPINCOUNT is set, then the number of unsuccessful attempts to obtain the semaphore is incremented by 1 only after TMSPINCOUNT spins have been done.
Code for the BB semaphore and the semaphore used by /Domain follows a different rule. This code will log LIBTUX_CAT:5005 or LIBGW_CAT:5010 if a process has to wait for the semaphore for 10 seconds and the semaphore has never been released by the original owner during this time period.
3) TMSPINCOUNT is used for the BB semapahore, AOM semaphore, ACL semaphore, /Domain semaphore, and /Q semaphore. Locking the GTT uses the same BB semaphore that used to lock other tables in the BB.
Regards,
Ed

Question in OCS Installation & Configutaion

Similar Messages

Maybe you are looking for