Question on 4510E+R with Sup7E, redundant sups, both IOS and ROMMON upgrade

I found the procedure for a non-disruptive IOS upgrade for a dual-Sup7E 4510E+R using the...
redundancy reload peer
redundancy force-switchover
.....commands to maintain switch availability during IOS upgrades.
Can I use the same procedure for a ROMMON upgrade? I will not have console access and must do it remotely.
This is what I have:
Current ROM: 15.0(1r)SG5
Current IOS: bootflash:cat4500e-universalk9.SPA.03.03.02.SG.151-1.SG2.bin
This is where I want to go:
New ROMMON: cat4500-e-ios-promupgrade-150-1r-SG11
New IOS: cat4500e-universalk9.SPA.03.04.05.SG.151-2.SG5.bin
config-register is currently 0x2102
Current bootvar:
boot system flash bootflash:cat4500e-universalk9.SPA.03.03.02.SG.151-1.SG2.bin
Questions:
1) Can I upgrade the ROMMON first, then IOS?
2) If #1 is true, is there any problems with a temporary scenario where each Sup is running a different ROMMON version?
Proposed proceedure:
3a) Upgrade ROMMON on standby Sup
3b) switchover to make the standby active
3c) Upgrade ROMMON on the original active Sup
3d) Upgrade IOS on the original active Sup
3e) switchover to make the original Sup active
3f) Upgrade IOS on the original standby Sup.
Thanks for any feedback.

Hi Eric,
There are 2 ways to upgrade:
1-Load the IOS version you want to both Sups, change the boot variable, so the switch can load the new IOS after the reboot and finally reboot the chassis.
2-Use ISSU see link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/prod_white_paper0900aecd806f0663.html
As for the ROMMON, you usually don't need to upgrade it often and you can always do that later if you need to. I think, some of the newer versions of IOS upgrade the ROMOM as well as the main image but I am not sure exactly for what platforms.
HTH

Similar Messages

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP mod end can't switch to RP to start download the IOS using Xmodem, though it shouldn't work in ROMmon SP omde but the xmodem is not gving the

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP modw and I can't switch to RP to start download the IOS using Xmodem, though Xmodem shouldn't work in ROMmon SP mode but the it's not gving the
not executable message, the slot0: and disk0: are not accessable can't see the files inside, when I try the dir slot0: or dir disk0: it says it can't be opened and when I try to boot from them there's noting as well, what can I do to load an IOS image to the booflash: or slot0: ,each time I load the image using Xmodem at the end it gives me *** System received a Software forced crash ***
signal=0x17, code=0x5, context=0x0
When I run the command:
rommom1> boot bootflash:
boot: cannot determine first file name on deice "bootflash:"
rommon2> boot slot0:
boot: cannot open "slot0:"
boot: cannot dtermine first file name on device "slot0:"
BTW System Bootstrap, version 7.1
I''m looking to format the PCMCIA using a PC and format it to FAT16 and copy the boot image into it and then try to load from the PCMCIA afterward if it works I'll format it using the Supervisor engine 2.
Any one have another new idea I can use, thanks in advance

This is a potentially complex issue.
Is this SUP configured to run as IOS native or CatOS Hybrid?
While in ROMMON can you do the 'dev' command and see whad drives are recognized. Then 'dir' the drives that the SUP recognizes.
Can you provide the screen captures as it boots?
You would be bette served by hacing a TAC case.

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please researc

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.

Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran

HT4962 I have an Ipod Touch 2nd generation with version 4.2.1 IOS and it no longer seems to be recognized as a device when I plug into my computer. I want to update my sync settings but can't do this without being able to select the device. Any suggestion

I have an Ipod touch 2nd generation with version 4.2.1 IOs and it is no longer recognized as a device when I plug into my computer. This means I can not change synch settings - any ideas on what I need to do ?

See:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabl

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabled. I don't know if it's talking about a new version of iOS on my iphone or my laptop. You people sure like to make things difficult.

trevbeats,
I had the same problem. It turned out the issue for me was that I had Automatic downloads turned off on my devices!
see below how to turn it on.
Tap Settings > iTunes & App Stores on your device.
Tap Sign In if you're not already signed in to the iTunes Store.
Enter your Apple ID and password.
Tap On/Off switch to enable or disable Automatic Downloads for each content type.

During setup of new Apple TV I am not able to progress past the screen that asks if I want to share usage info with Apple. Using both wireless and hardwire setup I've answered no - then yes - but I cannot get the system to accept an answer. Anyone else?

Aside from not being able to progress past the question of sharing info with Apple - I've also noticed that the remote does not function when I presss the "select" button - only when I press the "menu" button can I acknowledge a question or a step in the setup proccess. Help!

From: Test Screen Name [email protected]
Sent: Sunday, August 04, 2013 11:32 AM
To: gunner0490
Subject: I'm not able to open PDF files in Adobe Reader XI.
Re: I'm not able to open PDF files in Adobe Reader XI.
created by Test Screen Name <http://forums.adobe.com/people/TestScreenName> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

Time zone compatability problem with timed event created on iOS and pushed to Windows7 Outlook calendar for sharing

Hi, I am in Jerusalem time zone. My Windows7 LAPTOP time zone is set to it (UTC+02:00 Jerusalem). My iPhone5 and iPad are both "Set Automatically" (ON) to Jerusalem. When I create any new event in my outlook on my Laptop it's generated with the Jerusalem time zone and pushed properly via iCloud to my iPhone and iPad. However when I create a new timed event on either my iPhone or iPad. or even in iCloud calendar (in a browser) the event is pushed to outlook on my Laptop in a "Beirut" time zone. Now that both Jerusalem and Beirut are on the same time zone (UTC + 02:00) it doesn't create any problem (though I prefer to see that the pushed events are indeed in Jerusalem time zone and not Beirut...). However, at and around day time saving change days there are problems of events created on iOS devices or even in iCloud (using browser) and pushed to outlook at the wrong times (1 hour earlier or later, depends on the change direction in Jerusalem time...) with a Beirut time stamp.
How can I resolve this problem and make sure all timed events, created on iOS devices at a Jerusalem time zone, appear as such after pushed via iCloud to my windows7 Outlook calendatr? Thanks!

I also have this issue (iPhone 5). Outlook needs to be configured properly in that timezone option needs to be selected. Which is challenging enough.
However the bigger issue for me is that when I open the ICN file:
1. I have no way to accept decline etc.
2. When the event is populating the calendar in the wrong time I can neither cut and paste nor select and move. It is totally static.
So for every meeting request I have to ensure it populates the right time as per my time zone. and if it doesnt i have to manually enter a second meeting 'X' hours earlier/later depending on which time zone the meeting was generated in.
I spoke to Apple. Their solution is make sure Outlook is properly configured. Fine...but good luck. I need a work around that is Apple based. Because this *****.
They said they would send to the development team. I am not holding my breath.

Detected duplicate HTTP-based FlexSessions in CF10 with Air Mobile (3.4) IOS and Android apps

We're getting the "duplicate session" error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with Coldfusion 10 Standard.
faultCode:Server.Processing.DuplicateSessionDetected faultString:'Detected duplicate HTTP-based FlexSessions,
generally due to the remote host disabling session cookies.
Session cookies must be enabled to manage the client connection correctly.' faultDetail:'null'
Have read most of the docs about this error -all to do with LCDS
Notes:
Not using LCDS,
No Remote Calls from loaded Sub-Apps,
No Errors from the Flex Web App which is pretty much identical and calls the same cfcs.
The error does not happen all the time and is hard to reproduce - say 5% of app sessions at a guess.
Could it be a two first time remote calls hitting the server together before a session is set up?
Our remoteObjects are in two places 1) Main Application.mxml and within a class compiled into the main app - can't see how this would be an issue.
I enabled session management for the CFCs in Application.cfc but still occurs. Is this neccessary - it's not in any docs?
Could this be something to do with the app not being shut down - as is typical with mobile users? When they resume use after a day or two surely a new session will be created?
Please advise thank you.

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

Weird issues with file share using both SMB and AFP?

I use my Xserve with 10.4 server primarily as a file server (with a huge RAID array attached via Ultra320 SCSI). I've served files from this server over SMB ("Windows" sharing) to both PCs and Macs for a few years now with no big issues. The files are being shared in a collaborative environment with extensive user accounts and ACLs set up.
I would like to turn on AFP for these same file shares, so those accessing with a Mac can have the added benefits of AFP over SMB. However, I've heard some rumors of some complicated issues developing from the use of both AFP and SMB together on the same folders, in a mixed environment.
The rumors I've heard are things that would happen rarely but enough for it to be significant. For example, a file created over SMB and then edited over AFP would have some problems being re-edited over SMB again, due to some complicated feature that the rumor is unable to explain (something with a resource fork or file locking?). Maybe something weird that just involves the Adobe Creative Suite?
Anyway, I figured I'd throw this out there. Anyone who serves files over both protocols to a varied set of computers and applications having weird issues? Or is everything working for you? Thanks in advance.
Message was edited by: dtemp

Thanks for the responses!
re:crop
It's coming in as cropped with no way to fix it that I can see.
Pressing space or opening in preview shows the full image but if it gets anywhere near Photoshop it comes in auto-cropped.
I'm starting to this it's a bug and will be reporting it to Adobe.

I was going into gotomypc - it asked me a question as to open with which app - I said Firefox and not to ask me again. It's a mess and I can't use it anymore.

It opened over 200 tabs with nothing in any of them. I just want to reset my computer to the way it was before. How can I do that?

You get that problem if you select the Firefox program to handle a file when you get an "Open With" dialog.
*https://support.mozilla.org/kb/Firefox+keeps+opening+many+tabs+or+windows
You can delete the mimeTypes.rdf file in the Firefox profile folder to reset all file actions if you aren't able to change the action in Firefox > Preferences > Applications
*http://kb.mozillazine.org/File_types_and_download_actions
*http://kb.mozillazine.org/mimeTypes.rdf
*http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions

Probably a simple answer; centered links with floating link descriptions, both left and right of the links?

Attatched is an image of the requested result. I'm new to Dw so this might be an easy bit of code, but with research I haven't been able to find an answer.
Ideally, the numbers in the middle are links (centered on the page); and the text is a description of the link which floats to either side of the links, but is not necessarily centered; nor linked.
I would really appreciate the help of someone more knowledgeable. Thanks in advance.
The code I'm working on follows the image.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>design communications</title>
<style type="text/css">
body,td,th {
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
font-style: normal;
font-weight: lighter;
font-size: 10px;
color: #FB6145;
body {
background-color: #FFFFFF;
.strike {
text-decoration:line-through;
.links {
color: #FB6145;
text-decoration: none
a:visited {
text-decoration: none;
color: #FFA493;
a:hover {
cursor: none;
text-decoration: none;
a:active {
text-decoration: none;
.back-arrow{
color: #FB6145;
text-decoration: none;
font-size: 14px;
</style>
<link rel="shortcut icon" href="images/e_rimoldi_favicon_02.ico" type="image/x-icon" />
<style type="text/css">
</style>
</head>
<body>
<p><a href="question mark/prefix_0_0.html">? </a></p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<div class="links">
<p align="center">| <a href="works_03_01_perspective.html" id="01"
onmouseover=
"document.getElementById('02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>01</a> |</p>
<p align="center">| <a href="works_03_03_plan.html" id="02"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>02</a> |</p>
<p align="center"> | <a href="works_03_02_section.html" id="03"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>03</a> |</p>
<p align="center">| <a href="works_03_04_mapping.html" id="04"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('back-arrow').className='links';"
>04</a> |</p>
<div class="back-arrow">
<p align="center"><a href="works index_1.0.html" id="back-arrow"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';"
>«</a></p>
</div>
</body>
</html>

hey marty,
Perhaps this updated code will help clarify. I want the links to be centered on the page. But the link descriptions to float to either side? Does that make sense?
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>design communications</title>
<style type="text/css">
body,td,th {
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
font-style: normal;
font-weight: lighter;
font-size: 10px;
color: #FB6145;
body {
background-color: #FFFFFF;
.strike {
text-decoration:line-through;
.links {
color: #FB6145;
text-decoration: none
a:visited {
text-decoration: none;
color: #FFA493;
a:hover {
cursor: none;
text-decoration: none;
a:active {
text-decoration: none;
.back-arrow{
color: #FB6145;
text-decoration: none;
font-size: 14px;
</style>
<link rel="shortcut icon" href="images/e_rimoldi_favicon_02.ico" type="image/x-icon" />
<style type="text/css">
</style>
</head>
<body>
<p><a href="question mark/prefix_0_0.html">? </a></p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<div class="links">
<p align="center">| <a href="works_03_01_perspective.html" id="01"
onmouseover=
"document.getElementById('02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>01</a> | meddling</p>
<p align="center"> kongenshus | <a href="works_03_03_plan.html" id="02"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>02</a> |</p>
<p align="center"> | <a href="works_03_02_section.html" id="03"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>03</a> | design communications</p>
<p align="center"> green river | <a href="works_03_04_mapping.html" id="04"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('back-arrow').className='links';"
>04</a> | utah</p>
<div class="back-arrow">
<p align="center"><a href="works index_1.0.html" id="back-arrow"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';"
>«</a></p>
</div>
</body>
</html>

Bin fitting with a counter using both analytics and model clause.

11.2.0.3
This falls under 'just want to figure out how to do it'. Its not critical for work. I want to try to see if its possible to do this with both analytic function and with a model clause. Just to see if its possible. It has been stumping me.
I got the idea to look at this from this article about bin fitting. I have been playing with the model clause and I think you would do something with the 'increment' clause, but I dont see a way to reset it to 1 at a certain point.
http://www.oracle.com/technetwork/issue-archive/2012/12-mar/o22asktom-1518271.html
The case I want to look at is, bin fitting based on a counter and a partition by. In theory this should be simpler than the example in the link.
[code]
create table myrooms (
room_number number,
person_id        number);
create unique index myrooms_ind on myrooms(room_number,person_id);
[/code]
Person_id is not unique. So row_number is more appropriate than rank or dense_rank.
Problem: Partition by room_number, assign up to 50 people to a specific group with in the same room. This seems like it could be handled with a row_number() and a window clause, but that is not supported.
I need to basically translate the old procedural counter into sql:
pseudo-code that does not compile that would have a reason to use this logic.
[code]
declare
cursor curGetRoom
     select room_number,person_id
        from my rooms
      order by room_number;
counter number := 1;
vCurrentRoom myroom.room_number%type;
begin
    for i in curGetRoom loop
        if vCurrentRoom is null then
           vCurrentRoom := i.room_number;
        elsif vCurrentRoom = i.room_number then
              if counter < 51 then counter :=counter+1;
              else counter := 1;
        else
             vCurrentRoom := i.room_number;
            counter :=1;
        end if;
end;
[/code]
simple partition query., but I dont see a way to limit this to 50 and then start over. Window functions are not supported with row_number()
[code]
select room_number,person_id,row_number() over (partition by room_number order by person_id) rn
from myrooms
[/code]

11.2.0.3
This falls under 'just want to figure out how to do it'. Its not critical for work. I want to try to see if its possible to do this with both analytic function and with a model clause. Just to see if its possible. It has been stumping me.
I got the idea to look at this from this article about bin fitting. I have been playing with the model clause and I think you would do something with the 'increment' clause, but I dont see a way to reset it to 1 at a certain point.
http://www.oracle.com/technetwork/issue-archive/2012/12-mar/o22asktom-1518271.html
The case I want to look at is, bin fitting based on a counter and a partition by. In theory this should be simpler than the example in the link.
[code]
create table myrooms (
room_number number,
person_id        number);
create unique index myrooms_ind on myrooms(room_number,person_id);
[/code]
Person_id is not unique. So row_number is more appropriate than rank or dense_rank.
Problem: Partition by room_number, assign up to 50 people to a specific group with in the same room. This seems like it could be handled with a row_number() and a window clause, but that is not supported.
I need to basically translate the old procedural counter into sql:
pseudo-code that does not compile that would have a reason to use this logic.
[code]
declare
cursor curGetRoom
     select room_number,person_id
        from my rooms
      order by room_number;
counter number := 1;
vCurrentRoom myroom.room_number%type;
begin
    for i in curGetRoom loop
        if vCurrentRoom is null then
           vCurrentRoom := i.room_number;
        elsif vCurrentRoom = i.room_number then
              if counter < 51 then counter :=counter+1;
              else counter := 1;
        else
             vCurrentRoom := i.room_number;
            counter :=1;
        end if;
end;
[/code]
simple partition query., but I dont see a way to limit this to 50 and then start over. Window functions are not supported with row_number()
[code]
select room_number,person_id,row_number() over (partition by room_number order by person_id) rn
from myrooms
[/code]

Photos showing up with no dates in both iphoto and aperture?

Why has my photos of 60,000 plus have many of the photos with no dates on the library view in iphoto or aperture? This causes my whole library to be out of order. How do I go about getting those dates back so I can see them in events and search by date. Some of the photos have dates and some just have a string of numbers associated with it. Please help

Can you please show a sample of the wrong dates - both for Aperture and iPhoto?
What is your Aperture version and your iPhoto version exactly?
What did you do, before this problem started? Have you tried already some trouble shooting, like repairing the Aperture library ? Aperture 3: Troubleshooting Basics http://support.apple.com/kb/HT3805
Regards
Léonie

Why can't I install MacOSX Lion on a Mac Mini with 10.6.8, 2GB RAM, and CPU upgraded to Core2 Duo?

I have an older Intel Mac Mini running fully updated Snow Leopard with an upgraded CPU (Core2 Duo), RAM (2GB), and hard drive.
Supposedly, this should be compatible with Lion, but the App Store refuses to download it.
Any ideas?
Thanks.

It's not the graphics card it is the fact that it is an "upgraded"
system. Lion, as with any OSX install, is based on the
original computer ID. If the ID indicated that it was not
a model that was shipped with a CPU that meets the minimum
requirements it will not install.
The reason I say it is not the graphics card, is that my
Macbook has that card and Lion installed without issue. It
was, however, equipped with a Core2Duo processor.

Window with no taskbar entry, both JWindow and undecorated frames dont work

I wanted to create a borderless, window without a titlte bar, with no task bar entry, so as in JDK 1.3, I created a JWindow and it worked pretty good. Now that I have upgraded to JDK 1.4, it turns out that in order to get a focus to components with JWindow, you need to pass in a controller frame in the JWindow constructor, and this controller frame has to be made visible for the components within the window to have focus. Now that I pass in a controller frame to the JWindow constructor and make it visible, I see an icon for the window in the taskbar.
The new way to create borderless window in JDK 1.4 is to create an undecorated frame, but for undecorated frames an icon always appear in the task bar.
Anybody knows how to have a borderless window without a title bar and task bar entry in JDK 1.4. Any help would be highly appreciated.
Thanks

try creating a JDialog and call setUndecorated on it. I think Dialogs don't add taskbar entries.

Question on 4510E+R with Sup7E, redundant sups, both IOS and ROMMON upgrade

Similar Messages

Maybe you are looking for