Question regarding Run control ID

Hi All,
As we all know that to run any process we need to specify a runcontrol id to be associated with any process that need to be run and this run control id determines how and where any process will run.
However, When we schedule any process(App Engine, SQR, Cobol SQL..etc) , a page appears which asks to select existing run control id or add new one but, when we add a new run control id of our own choice we don't specify like when and how the process will run, but just the name of runcontrolid.
Then, how the system knows what settings to be done when we run any other process using the same runcontrol id since we haven't provided any other info associated with that runcontrolid but just it's name.?
Hope, I have made my point

Normally, a run control page will include a subpage like PRCSRUNCNTL_SBP. This page will include a "Run" pushbutton that runs PeopleCode to load the PRCSRQSTDLG page where you enter the additional information (where, when, etc.). The PeopleCode then uses the Process Request APIs to submit the requested
process(es). If you wanted to find out which tables are updated by the APIs, you could enable SQL trace--I'm not sure if they're documented anywhere.
Regards,
Bob

Similar Messages

I got a question regarding running iOs and Windows using virtual software.

Greetings!
I got a question regarding running iOs and Windows using virtual software. I recently bought a monitor so I can display Windows on it and run both OS at the same time.Now,I'm using BootCamp. I downloaded VirtualBox for "tranferring" Windows on it. Since I'm a new iOs user , what do I need to do in order to make work?
Do I need to un-install Windows from BootCamp,install VirtualBox and then install them again?
Any information would be appreciate it!

That should work to use OS X, you can run MS Windows using Virtual Box and use a seperate display for the Virtual Box window. That way you can run OS X and MS Windows simultaneously. However remember Virtual Box is freeware and not a commercial application like Parallels or VMWare Fusion and may not have the features of a commercial application. Support for Windows run in any virtualization application (Virtual Box, Parallels or Fusion) is not generally done on this forum as they are not OS X related. To get help on those apps you usually will need to go to their forums.
Remember IOS will not run on either OS X or MS Windows, it only works on IOS devices.
Good luck with your installation.

Question regarding running parrallel system

Hi, i didn't know how to state my subject correctly, anywayz, here is my question.
I am going to buy an IMAC and a mini IMAC, and i really want to install window vista onto my apple computers. I know you can get the parrallel "thing" so that you can run mac and window at the same time. So my question is at what spec can both mac and window run smoothly at the SAME TIME. Mini mac only have 2.0 Ghz, so im reallie concerned, because i use a lot of window softwares and many softwares can only run by window and i don't want to switch on and off between mac and window either. So i really like to run mac and window at the same time.
please give your thoughts ^^
thank you
-JJ

iMac and Mac Mini; the software youa re talking about is Parallels, and their competition is VMWare, you also have the option of setting up your system dual-boot using Apple's BootCamp (but it will only run one OS at a time).
Parallels and VMWare will both run well on any current model of Mac. Vista doesn't really run very well on anything, and the Microsoft end-user license agreement prohibits you from using home versions of a Vista in a virtual machine.
One you've gotten around that and the problems with Vista and Vista's driver support, both Parallels and VMWare do a decent job. Microsoft suggests that you have a minimum of 1G of RAM to run vista, 2G if you want all the features of the Vista Aero UI. That's on top of the Mac OSX and virtual machine software requirements, so if you go the VM route you'll want 3G of RAM to run Vista (on the iMac, Mac Minis have a max 2G of RAM). The VM's 3D acceleration is OK on the iMac, but will be slower than direct-to-hardware (which you'd have under BootCamp). I don't know if the 3D hardware acceleration will work on the Mac Mini (it uses an Intel GMA 950 GPU).
Having used Vista, I'd say that at this point you'd probably be better off with XP right now, if possible.

Z87 Gaming Boards - Questions regarding fan control / soundblaster cinema...

Hello everyone,
I'm thinking about switching to MSI Z87-G45 Gaming (currently using Asus Gene-Z V), however there are three issues that I've been unable to find information on:
1) Fan Control
The new msi boards seem to have new bios fan control which enables you to set a low temperature and corresponding fan speed, aswell as high temperature which marks the temp when the fan will reach 100% speed. However I've read that this is only available for the CPU_FAN1 header and not CASE_FANX or even CPU_FAN2 (if available). Is that true?
2)Audio Solution
The middle boards seem to feature Realtek 1150 in combination with the software solution Soundblaster Cinema (Xpower as X-Fi MB3). Now the soundblaster cinema really confuses me, is it better than the X-FI MB2 (thats the software solution of the asus Z77 rog boards)? Does it have the "soundblaster console" in addition to thx true studio pro or is it just the thx utility etc.?
3) VGA Boost in combination with msi graphics cards
What exactly does this do? It says that it automatically increases the power target, but is that useful if you also use msi afterburner?
Thanks.

Thanks for info, I ordered a G45-Gaming today and let's see how it works out.
Quote from: Joiis on 20-June-13, 02:51:13
Can you control 3 pin fans with this board?
BTW first post here :-)
I can update you on this issue once I get everyone up and running, however generally msi had the following setup:
CPU_FAN headers -> pwm control (and sometimes voltage too)
CASE_FAN headers -> voltage control only (= 3 PIN fan)
The "old" case fan control sucked though since you could only set a range from 60% to 100% on the fans whereas for cpu fans you could set 0 to 100%. Also the minimum temperatur for case fans was 40° which in makes case (case temp never rose above 35°) made case fan control pretty much useless.

I ust went from XP to Windows 7 and have several questions regarding email controls. Comcast can't answer them and asked me to ask you.

Among my new problems.
1. The alphabet is now missing from the opening page of my Address Book.
2. How do I set my email page as the opening page?
3. When I finish answering an email, send it and click “Delete” on the just answered email, it doesn’t delete but instead opens a new email page I have to then close and go back to the in box, check that old message and delete it that way. How can I correct this?
4. How do I set up a default type and size large enough for me to read?
5. How do I turn off the automatic paragraph indentations when I number or letter paragraphs?
6. Sometimes when I click “Send” on an email, it takes many seconds to leave. Why?
I’ll sure appreciate any help.
Bruce

This should answer your questions
http://support.apple.com/kb/index?page=search&src=supportsite.home&locale=enGB&q=transfer%20itunes%20to%20new%20PC

Questions regarding Alert log & Control file

Hello,
This is my first post to this forum. I'm new at administrating a database 11.2.0.3. I have couple of questions regarding Oracle DB.
1)Which one is preferred method among the two?
Checking alert log fie manually or automating a shell script for checking alert log file.
2) Does setting CONTROL_FILE_RECORD_KEEP_TIME parameter to zero make the database unrecoverable, if RMAN recovery catalog is not used?
Any help will be highly appreciated. Thanks in advance.
Regards

1)Which one is preferred method among the two?
Checking alert log fie manually or automating a shell script for checking alert log file.
That depends on your comfortability - But checking alert log is good.
2) Does setting CONTROL_FILE_RECORD_KEEP_TIME parameter to zero make the database unrecoverable, if RMAN recovery catalog is not used?
Yes - you cannot recover your database if it set zero and doesn't have recovery catalog.

Question regarding JRockit

Hi All,
Question regarding JRockit.
I do not know this software nor am I a java developper.
What I would like to do is monitor JVM running inside OC4J in Oracle e-Business Suite.
Could this tool be use to do so?
Also, I think want I really need is JRockit Misson Control. Can I simply install JRMC or do I need to install JRockit then MC?
Thanks to share some lights :)

I am not sure if JRockit is ceritified with OC4J on EBS, but I seriously doubt it.
You could look into a utility called jvisualvm which resides in $JAVA_HOME/bin
Documented here: http://docs.oracle.com/javase/6/docs/technotes/guides/visualvm/index.html

Question regarding homehub and Open reach router -...

Hi all,
I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
Thanks, .

Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white). The HomeHub has its own power switch, the modem doesn't.
There is something wrong if the HomeHub needs to be turned on before the modem. As others have said, in general best to leave the modem on all the time. You should be able to connect them up in any order, or together. (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
Check if the router can connect/disconnect from the broadband using the web interface. Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

Questions regarding customisation/configuration of PS CS4

Hello
I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions

NyanPrime wrote:
<answered above>
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions
2. No. It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5. It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
3. Not sure, since I haven't tried it. However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
4. What buttons are you talking about? Those you are creating in your document? If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
5. There are many, many options for positioning and sizing panels. Most start with making a panel visible, then dragging it somewhere by its little tab. One of the important features is that you can save your preferred layout as a named workspace. Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created). The name of that menu is a little confusing. Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
As an example, I use two monitors, and this is my preferred layout:
6. No, it's not possible to affect the layer names Photoshop generates, as far as I know. I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
Hope this helps!
-Noel

Question regarding ONT connection via Ethernet and Cable cards

Hi,
We recently upgraded to Fios Quation 150Mbps/65 plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
I have 2 questions regarding this new setup:
1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
Quiestion 2.
Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room.
Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct?
Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet? and would this setup affect in any way the propper functioning of the cable boxes in the house?
I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
Cheers.
Solved!
Go to Solution.

It's not valid to have two devices connected to the ONT, PC and VZ Router. Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
Other options:
1. Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
2. Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
Hope that helps.

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

Questions regarding creation of vendor in different purchase organisation

Hi abap gurus .
i have few questions regarding data transfers .
1) while creating vendor , vendor is specific to company code and vendor can be present in different purchasing organisations within the same company code if the purchasing organisation is present at plant level .my client has vendor in different purchasing org. how the handle the above situatuion .
2) i had few error records while uploading MM01 , how to download error records , i was using lsmw with predefined programmes .
3) For few applications there are no predefined programmes , no i will have to chose either predefined BAPI or IDOCS . which is better to go with . i found that BAPI and IDOCS have same predefined structures , so what is the difference between both of them .

Hi,
1. Create a BDC program with Pur orgn as a Parameter on the selection screen
so run the same BDC program for different Put organisations so that the vendors
are created in different Pur orgns.
2. Check the Action Log in LSMW and see
3.see the doc
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
<b>Reward points for useful Answers</b>
Regards
Anji

I have read all the questions regarding the "Can't send photo using iMessage".

I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
It will try to send but it will get stuck just before it sends
and the red ! will appear with the "Not Delivered" status.
When i tap on the !, it just says "This iMessage was not delived".
No other message or photo is sending as the same time as the photo.
I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
What's wrong?!?!?!?!

It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHz

Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

Question regarding Run control ID

Similar Messages

Maybe you are looking for