Questions on OID and E-Business

Hi all,
What is the best way to migrate all the user accounts from instance said "A", and " B" that's using Oracle E-Busines, and 2 other instance said "C", "D" that's using older version of Oracle Internet Directory into the fresh Oracle Internet Directory (just install)? How do i filter the user account from the 4 instances above to make sure the account are not duplicate before import into fresh Oracle Internet Directory.
Thanks,
Kevin
.

Hello Hussien,
Anyways I upgraded to 10.1.3.5 patch_set 10gAs on ebiz r12.0.6
I have other question regarding the doc ID 376811.1
in there is section
Pre-Install Task 4: Apply the latest certified Application Server Patchset
Oracle E-Business Suite Release 12 is certified with the Application Server Patch Sets listed in the table below:
Certified AS Patchset Download Location One-off Patch details (if any)
Oracle Identity Management 10g Release 3 Patch Set 1 (10.1.4.2) 5983637 8811442
Oracle Identity Management 10g Release 3 Patch Set 2 (10.1.4.3) 7215628 8811442
Oracle Application Server and Oracle Developer Suite 10g Release 2 (10.1.2) Patch Set 2 (10.1.2.2.0) 4960210
Oracle Application Server and Oracle Developer Suite 10g Release 2 (10.1.2) Patch Set 3 (10.1.2.3.0)
5983622
Follow the installation instructions provided in the patch README to install the patch on your Identity Management Server and to check supported operating systems.
Oracle always recommends latest certified AS patchset for E-Business Suite customer
I installed oracle 10gas 10.1.4.0.1 its up and running so do i need to just apply the patchset oracle Identity management 10gR3 patcheset (10.1.4.3)
or I have to apply both 10.1.4.3 and the oracle Application server 10g release 2 (10.1.2)patch set 3(10.1.2.3.0) ???
because in enterprise manager application server control it says version 10.1.2.0.2 and identity management components show 10.1.4.0.1 .
thanks in advance.

Similar Messages

MSO.DLL not installed with "office home and small business 2013"

Hello,
In my 32 bits application, I use the IInPlacePrintPreview interface on a "word.document" OLE object to show a preview of a word document.
That's work fine with Office 2013 Standard Edition (32 bits) on a Windows 7 x64 Edition, but my application crash with "office home and small business 2013" (32 bits).
I have noticed that the call to query the IInPlacePrintPreview interface on the OLE object load the mso.dll of Office into memory.
The mso.dll is installed with the Office 2013 Standard Edition, but not with the "office home and small business 2013" Edition.
I guess the problem is the lack of
mso.dll.
Do you know why the mso.dll is necessary for the preview of a word document ?
How do I install and configure mso.dll on a
"office home and small business 2013" edition ?
Thanks for your help.

Hi,
You may try the ODT (Office Deployment Tool) to configure the Configuration.xml file and install the Office 2013 Home and Business edition.
Please refer to the following steps:
1. Downloading ODT from: http://www.microsoft.com/en-us/download/details.aspx?id=36778
2. After downloading the ODT, there will be a Configuration.xml file ODT installed folder. Modify the Configuration.xml file as below so that we can download home business package.
<Configuration>
<Add SourcePath="D:\Office\" OfficeClientEdition="32" >
<Product ID="HomeBusinessRetail">
<Language ID="en-us" />
</Product>
</Add>
<Updates Enabled="TRUE" UpdatePath="D:\Office\" />
<Display Level="None" AcceptEULA="TRUE" />
<Logging Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>
For more information regarding to the ODT, you can refer to the following link:
http://technet.microsoft.com/en-us/library/jj219422(v=office.15).aspx
Should you have any questions, please feel free to let me know. many thanks!
Michael Bai
Office Client Support

Creating a new context in OID and extending DIT

I am developing a portal. I need to create a new context in the OID and extend the DIT so that i can store Subscriber information in it. Please help me with the procedure, and sample schema.
thanks in advance,
udai.

Hello JB-Baby
You can't create a subfolder in Sent. Mail does this automatically for each account you set up. If you wish to organise messages you send by some criteria or other, why not consider a Smart Mailbox?
I assume by your second question you mean can you change the columns in the message viewer? Yes you can. You select View -> Columns and check the ones you want. You can adjust the order of the columns by dragging the titles around in the message viewer.
If you didn't mean this, maybe you could explain what you are after in a little more detail.

High waits on scatter read and buffer busy wait ..

one of my system is undergoing some serious problem ~
i checked when some sql querying few large tables ( 30 millions rows ,partioned )
system waits became significant .. the ones stand out are scatter read and buffer busy wait ...
on the longop , you can see those sessions waitting to scan the large table ..
buffer get ratio dropped from 90% to like 30% ,average buffer hit ratio is like 55%
mu questions are
1.what's your view of throwing the problem away ?
add physical memory, then increase data buffer ?
it's getting scanned very often , but it's too large to pin it in the keep pool .
2. why buffer busy wait ?
i don't fully understand why this happened ?
becase what they are doing are just querying ,nobody is modifing any data ?
will increase freelist help this ??
thanks your talneted ideas
br/ricky

Have these SQL statements been added recently, or have they been around for a long time. If the latter, then it seems likely that they've changed their execution plan to start doing tablescans (hence db file scattered read waits) or index fast full scans.
One of the causes of buffer busy waits is concurrent tablescans/index fast full scans - in 10g this particular cause has been split and reported as "read by other session".
Your first action should be to see if there is a more efficient execution plan for these queries. If the problem is due to a change in execution plan, common causes are: changes in statistics on the objects, failure to change statistics on the objects, changes in input value on the queries, changes in optimizer parameters, unlucky changes in data volumes.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk

How to handle vacation and daily business workload in cProjects

Hi,
we are planning to use cProjects for our ressource-management. The goal is also to take care of vacation and daily business workload. We would like to see that a ressource is not available on the specified day. Therefore we are thinking about a project with vacation and a workload and assign people to this project? Is there a best practice to handle vacation and the daily business workload?
Regards, Vanessa

Hi Sammar,
thanks a lot for your answer. This helps.
I have seen that my question is not really clear and therefore I would like to make it more concrete.
I am searching for a possibility to see - during staffing - that an employee is not available on several days. I don't care about the reason the ressource is not available but need to see this that the ressource is not available. If the worker is assigned to another task the demand is clear because it is handled within cProjects. But what about blocking of ressources (i.e. vacation) because this happens in an external system / HCM module? (Therefore I was thinking about to create a project for vacation and plan there the absences of my workers (because of vacation and other reasons). But is it not possible out-of-the-box to specify that the worker is not available on several days because I would setup a task for vacation and would need to assign him on several days and not only for a given time range.) Am I right with this assumption?
Also for the ressource planning: Sorry but I don't get the point with your answer (surely because I am not deep enough into the topic). How is it possible to have a project (lets call the task "daily business") and assign several ressources 25% to this tasks? I need to distribute the demand to several days. For example there is a worker that is using 25% for his daily time for training. In this time he is not available for other tasks. Therefore I would like to create the task, assign him to the task and cProjects should take the demand (8hrs / week) and split it into an demand of 2hrs / day. In this way I can block a ressource for everyday and in the ressource planning I see that he is only available 6hrs because there is already the demand of 2hrs on a daily base.... It this possible?
Regards, Vanessa

OID and MS Active Directory LDAP information Synchronization

Do you know have to do the integration between OID and MS active Directory? How to synchronize the LDAP information between two?

Hi, I have the same question.
Thanks,
Malin

Questions about Territory determination in Business transactions in CRM 7.0

Hi All,
We are in the process of configuring territory management in our system. I have a couple of questions regarding Territory determination in Business transactions in CRM 7.0.
1) Territories in business transactinos are determined based on partner function categories: employee and person responsible. If the employee is assigned to multiple territories, which territory is determined for the transaction.
a) Is it the territory for which he is assigned the 'Default territory' flag'?
b) What if the employee does not have any territories with the 'Default territory' set?
2) We have had SAP CRM since the last 6-7 years and recently upgraded to CRM 7.0. When I use the transaction searches in the Web UI using the search parameters 'Territory ID' and 'Territory description' we can't see any old transactions in the search results. We can only see the test transactions that were created after we ran the master data reln. update program CRM_TERRMAN_PROC_REL. Is there another program which updates transactional data relationships similar to the master data one?
Appreciate your inputs.
Regards,
Ramesh Nallabelli

Hi All,
We are in the process of configuring territory management in our system. I have a couple of questions regarding Territory determination in Business transactions in CRM 7.0.
1) Territories in business transactinos are determined based on partner function categories: employee and person responsible. If the employee is assigned to multiple territories, which territory is determined for the transaction.
a) Is it the territory for which he is assigned the 'Default territory' flag'?
b) What if the employee does not have any territories with the 'Default territory' set?
2) We have had SAP CRM since the last 6-7 years and recently upgraded to CRM 7.0. When I use the transaction searches in the Web UI using the search parameters 'Territory ID' and 'Territory description' we can't see any old transactions in the search results. We can only see the test transactions that were created after we ran the master data reln. update program CRM_TERRMAN_PROC_REL. Is there another program which updates transactional data relationships similar to the master data one?
Appreciate your inputs.
Regards,
Ramesh Nallabelli

Install Forms and Report 11g, Weblogic, OID and SSO ?

Hello,
I want to migrate our system from Forms and Reports 6i to 11g with weblogic server 10.3.3 and I have two questions:
1st: If we considered to obtain a system consists of (Weblogic 11g + Forms and Reports 11g + OID + SSO + Weblogic Portal + BI Publisher)
What is the steps and the sequence of products installation and configuration, and what is the required versions of each one ?
2nd: Can I abandon OID and SSO, is there a substitute ?
If so, what's the steps and the sequence of products installation and configuration ?
Thank you very much

>
You use the Oracle WebLogic Server installer to install Oracle WebLogic Server and to create a Middleware home (which is required before you can install Oracle Forms and Reports).
For Oracle Forms and Reports 11g Release 2 (11.1.2), download Oracle WebLogic Server 11g (10.3.5) from OTN or Oracle Software Delivery Cloud.
Be sure to select the proper Oracle WebLogic Server installer for your platform.
>
weblogic you can download from http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html

Some basic questions on ESS and MSS

Hi Experts,
This is the first time I am going to deal with
ESS and MSS.
I have some basic questions about it and they are
listed below:
1. In an organization if they want to integrate
ESS and MSS, how do they go about? What I mean
is, will they install the packages in the R/3
system and then use the to portal features to
make iViews of ESS and MSS.
2. Or is there a seperate package for the portal
and the R/3 system
3.What is the best way to customize ESS and MSS
iViews? Is WebDynpro used to customize ESS and
MSS applications, if yes how?
4. Are these ESS and MSS packages different for
ECC and the older version of R/3 systems? If yes what are the major differences?
Please do let me know on these subjects and also
if anyone of you have any links or documents
associated with this scenario please do send me.
Thank you
Regards
Luke

Hi,
here is what I know..
1 & 2. Depending on the backend SAP version, the relevant ESS/MSS Business Packages have to be installed on the Portal. On the backend it will be via an Add-on.
3. The webDynpro versions of ESS/MSS are available from mySAP ERP2004/2005 (ECC5/6). The best way to customize the iViews would be through the NetWeaver DevStudio.
ent
4. Yes, the ESS/MSS packages are differ depending on the backend SAP version.
You can find all the different packages & their info right here on SDN. From the home page click on the Portal Content Portfolio on the right hand side of the page>Browse Content Portfolio>Self Service for ESS & Line Manager for MSS.
Regards,
Suresh Datti

Delete and Restore Business Partner

Hi all,
I was able to delete business partner via BUPA_DEL, I want to ask some question:
How to restore deleted business partner?
How to get list of business partner that deleted via BUPA_DEL, who is perform deletion and when its deleted? Any report for this need?
Thank you

Hi Agus,
There are no way to restore data deleted by this transaction.
The only way is restore the backup if the BASIS team activated in your enviroment.
Regards.

GAL and Free Busy Information during Exchange 2007 and 2013 coexistence

Hello Everyone,
I am finishing up an Exchange 2013 migration from 2007. I am currently still in coexistence and had some questions around the Global Address List and Free Busy Information.
How to I tell if my clients are pulling address book information from my Exchange 2013 or 2007 Global Address List? I don't want to remove the 2007 system if the clients are pulling from it. All mailboxes are moved to Exchange 2013.
How do I make sure my clients are pulling the Fee Busy Information from Exchange 2013 or 2007? If I remove my 2007 servers will my clients lose Free Busy Information?
How do I tell what Exchange version my clients are getting this information from?
Thanks for any assistance!
Ian...

Hello,
Free/busy information are retrieved from user’s mailbox by EWS service.
GAL(I think you may refer to OAB), we can use the following command to get it’s generated server:
Get-OfflineAddressBook |FL
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Architecture question: Integrating AJAX and STRUTS

I'm slowly growing in familiarity with STRUTS and I have the basics of AJAX down, certainly as far as the request-response-parse-do something useful with the data paradigm goes.
My question is more about best practices in using an AJAX enable front-end with a STRUTS-based back-end.
In a nutshell, each user action is handled by a STRUTS action subclass. Requests are picked up by the STRUTS front controller and passed on to the handler for processing. The handler is then able to tell the controller which jsp/resource to send back to the user.
With AJAX, we are (generally) making specific data requests. We are essentially asking for data based on a set of parameters passed through on the request.
In the case of a dynamic search table (containing no business logic), the AJAX request is simply asking for a set of results that match some parameters supplied in the criteria form.
What should handle that data request?
I was thinking about a specific "data-server" set of classes which STRUTS can pass AJAX requests to.
NOTE: I'm thinking about this from the perspective of a new development, not tacking on to an existing application.
Thoughts, anyone?

So let me broaden the question slightly? What are the
best practices for implementing an AJAX solution with
STRUTS? I have looked around on the net but not found
anything that constructive yet.
Suggestions and/or pointers welcome.I have played around with AJAX just to understand how the technology works and how ajax can be integrated into a j2ee (or any other for that matter) web application. I havent worked on a project which has analyzed the best practises/pitfalls of ajax and implemented a solution.
Having said that, here's my take -
Ajax, as far as I know and have seen is a 'view' thinggy - enhanced user experience, lesser clicks, blah blah. The underlying XMLHttpRequest technology is just another way to hit the server with a request. And as I said before, once the server receieves a request, it really doesnt/shouldnt matter where and how the request originated from - it could a tunelled http request (as from an applet/swing app), a normal http request from a browser or a XMLHttpRequest (read ajax). The server validates incoming params if any and performs business logic.
And here's when the similarity ends. The response (or the view) is entirely dependent on the 'requestor'. For browsers, the server would emit html, wap for cellphones, objects to a swing/applet program (possibly).
The point I am trying to make is that this (the view part) is where you'll have to concentrate on tweaking (using the so called best practises) for ajax requests. For instance, there are a set of ajax tags already that you could reuse in your jsps which help developers build cool ajax enabled apps.
(See http://ajaxtags.sourceforge.net/)
There however are a few standard best practises for using ajax itself (and this is at a general ajax as a technology level) - see for example
http://www-128.ibm.com/developerworks/library/j-ajax1/?ca=dgr-lnxw01Ajax
ram.

[Urgent] Some questions about OID/OSSO 10g - 11g upgrade

Dear all,
We are under doing upgrading assessment of OID/OSSO 10g to 11g for a customer. After reviewed the 'upgrading guide', we still have some questions as below:
1.     Whether the ‘10g DIP profiles’ will be still available after the OID 11g upgrade? Currently there are some sync of AD<->OID and DB->OID.
2.     Whether the ‘WNA’ function will still work after the upgrade?
3.     Is there a big change of OID API from 10g to 11g? If so, I think a big effort maybe on application modification.
4.     I found that there is a OAM Basic version for OSSO 10g upgrade. So if this OAM Basic will migrate the OSSO configuration (like external application) automatically, or it must be re-configed after the upgrade?
5.     Currently customer config OID 10g as BPEL/ESB’s identity store. So does BPEL/ESB 10g is certificated with OID 11g also? I didn’t find the certification so far.
Thank you in advance and any comment are welcome.

Dear all,
We are under doing upgrading assessment of OID/OSSO 10g to 11g for a customer. After reviewed the 'upgrading guide', we still have some questions as below:
1.     Whether the ‘10g DIP profiles’ will be still available after the OID 11g upgrade? Currently there are some sync of AD<->OID and DB->OID.
2.     Whether the ‘WNA’ function will still work after the upgrade?
3.     Is there a big change of OID API from 10g to 11g? If so, I think a big effort maybe on application modification.
4.     I found that there is a OAM Basic version for OSSO 10g upgrade. So if this OAM Basic will migrate the OSSO configuration (like external application) automatically, or it must be re-configed after the upgrade?
5.     Currently customer config OID 10g as BPEL/ESB’s identity store. So does BPEL/ESB 10g is certificated with OID 11g also? I didn’t find the certification so far.
Thank you in advance and any comment are welcome.

IPhone 5S lost voicemail and when I tap vm icon the phone diales voicemail and gets busy signal. No other options show.

iPhone 5S lost voice mail and when I tap vm icon the phone dials voice mail and gets busy signal. No other options show.
started yesterday. No voice mail at all. When I tap the voice mail icon the phone immediately dials some number and that number rings busy. I can't select anything else. Using Virgin mobile/ I am stumped.
I have already tried a soft boot... power and home button....
Help!

Other than changing the SIM card, you don't mention any troubleshooting you did with your phone.
If you haven't already, try the following steps as needed:
Settings > General > Reset > Reset Network Setting.
Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
Restore phone in iTunes using a backup
Restore in iTunes as a new iPhone
IF the last step doesn't fix it, there is a hardware problem and you should make an appt. with an Apple Store Genius Bar. The fact that you haven't dropped the phone by no means rules out hardware issues.

Question regarding battery and warranty

Hi all! I have a quick question about how and if my warranty applies to my battery. After about a year and a half of ownership (I have the three-year extended warranty), my battery has gone completely down the toilet. It wasn't a problem before, but this year I have to lug my T61p around a lot for lab work. My battery is now rated at... 39.75Wh when it shipped at 84.24Wh. This is a pretty drastic difference. In any case, I don't think that this is covered by warranty, but figured that I'd ask before I drop $180 on a new battery (ouch). And, speaking of, if my suspicions are correct, does anybody know where I might find a 9-cell battery for the T61p? All I'm seeing on Lenovo's website is the one for the N100... which doesn't... match very well. Yaknow.
Thanks a lot!
ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

Is either of these appropriate? I'm wary of the one on Amazon, as there are other (off-brand) batteries that are advertised as being Lenovo ones (though those generally sell for a lower price). The other one just looks like I'll have to call up to buy it.
http://www.amazon.com/Lenovo-43R9255-ThinkPad-Notebook-Battery/dp/B001DX9EKA
http://affordablepcsupply.com/products/IBM/REF/42T4511.html
Thoughts?
ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

Questions on OID and E-Business

Similar Messages

Maybe you are looking for