Questions regarding BPM- asked in interviews
1) in BPM scenario does it necessary to use the receiver step for getting data inside the workflow ? without using the receive step can't we get the data inside the integration process?
2) in receiver step while maintaining properties for the receive step,we assign a variable and interface to it , ok can we enable the MULTILINE CHECK box for this variable maintained in receive step?
if enabled what happens?
3)what are the components in XI runnig on abap engine and java engine
chandra,
>>in BPM scenario does it necessary to use the receiver step for getting data inside the workflow ? without using the receive step can't we get the data inside the integration process?
yes, receive is necessary.
>>>in receiver step while maintaining properties for the receive step,we assign a variable and interface to it , ok can we enable the MULTILINE CHECK box for this variable maintained in receive step?
if enabled what happens?
when we have multiple receivers we enable the container of multiline receiverr...so in steps like receiver determination, this particular container is used.
>>>what are the components in XI runnig on abap engine and java engine
go to RWB - > cache montioring -> drop dowm list of java and abap, u wud find exaclty, wot all is under java and wot all under abap cache...
regards,
Vishal
Similar Messages
-
Interview Questions I was asked....
Hi all,
The following are the Interview questions, i was asked and although i know answers littlebit, i dont know whether they are correct or not, so i am
writing here to know answers and for your reference also.
1) Can i use function as column of table ? if yes, how ?
2) Sub Query and Joins, which one is better performance wise and how ?
3) Using Sys_refcursor OR a set of OUT parameters, which one is better ?
4) I am inserting data into table, what are the best options to avoid
to insert invalid data ?
5) I am loading data with some batch action or manually. After
inserting few records, i have committed the data, but after that
error occured. Now, how i will found, which data i have committed ?
6) How Audit has been done in sql and pl/sql from Developer point of view or dba point of view ?
Thanks,
Pal
Edited by: user546710 on Jan 21, 2011 3:26 AMuser12075620 wrote:
I don't think we can use the function as a column in a table. What John is referring to is a virtual column whose expression is defined af function call:
SQL> CREATE SEQUENCE SEQ1
2 /
Sequence created.
SQL> CREATE OR REPLACE
2 FUNCTION F1
3 RETURN NUMBER
4 DETERMINISTIC
5 IS
6 BEGIN
7 RETURN SEQ1.NEXTVAL;
8 END;
9 /
Function created.
SQL> CREATE TABLE TBL(
2 X NUMBER,
3 Y NUMBER GENERATED ALWAYS AS (F1())
4 )
5 /
Table created.
SQL> INSERT
2 INTO TBL(
3 X
4 )
5 SELECT LEVEL
6 FROM DUAL
7 CONNECT BY LEVEL <= 5
8 /
5 rows created.
SQL> SELECT *
2 FROM TBL
3 /
X Y
1 1
2 1
3 1
4 1
5 1As you can see, column Y value was calculated as select time. Now I deliberately declared non-deterministic function F as deterministic to show you virtual column is calculated at select time. In the above select Oracle calls function F for the first returned row. Then, since F is declared as deterministic Oracle realizes there is no need to call F again (same parameters - actually same no parameters in this case therefore deterministic function should return same results). Same thing happens when we select again:
SQL> /
X Y
1 2
2 2
3 2
4 2
5 2
SQL> /
X Y
1 3
2 3
3 3
4 3
5 3
SQL> As you can see, F is called each time we select so we can say that function is used as a column in a table.
SY. -
**question regarding 3G and wif**.
I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
ThanksYou can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.
-
Questions regarding customisation/configuration of PS CS4
Hello
I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutionsNyanPrime wrote:
<answered above>
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions
2. No. It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5. It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
3. Not sure, since I haven't tried it. However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
4. What buttons are you talking about? Those you are creating in your document? If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
5. There are many, many options for positioning and sizing panels. Most start with making a panel visible, then dragging it somewhere by its little tab. One of the important features is that you can save your preferred layout as a named workspace. Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created). The name of that menu is a little confusing. Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
As an example, I use two monitors, and this is my preferred layout:
6. No, it's not possible to affect the layer names Photoshop generates, as far as I know. I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
Hope this helps!
-Noel -
I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access
Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTimAny help would be much appreciated.
Kind regards,
RocknRollTim -
Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please VoteHi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support -
Hi All
I have some queries regarding BPM.Please respond.
Can we create / modify BPM processes using any Webservices / APIs available
Is it possible to edit template used for notification mails in BPM?
Do we have any way to transform BPM process design to standards like XPDL and BPMN. ?
Thanks
Monika
Edited by: Monika Jain on Jan 5, 2010 1:42 PM
Edited by: Monika Jain on Jan 5, 2010 1:45 PMHi Monika,
Regarding which version ob BPM is your question for notifications?
In NW BPM 7.11, you can not edit the text of the notifications, only the link to Task and UWL is configurable.
In NW BPM 7.2, there is a new type of Notification activity, where you have the freedom to edit the text of the notification, also to add dynamic variables from process context, but for the generic notifications(like "New Tasks") the functionality is the same as in NW BPM 7.11.
Please find a link to NW BPM 7.11 documentation for configuring Notifications.
http://help.sap.com/saphelp_nwce711/helpdata/en/e4/32ff7865fa483dba3686160f5c6dd0/frameset.htm
Best regards,
Radost -
Some generic questions on BPM of NW CE
Hi Gurus
i have over 6 years of ABAP business workflow experience and over 3 years of XI experience. Now i'm getting tough with this new stuff, BPM of NW CE. Here i have some generic questions of it:
1. How can i trigger a BPM task while a document, like a sales order , has been created in the system? is there any processes to catch the event of R3 in NWDI?
2. Can BPM consume RFC/BAPIs in R3?
3. Is it possible to make message mapping in BPM? i found there is a 'mapping' choice in the context setting of NWDI whereas it is quite simple compared with PI.
4. Can the BPM be integrated with webdynpro ABAP? or send the relevant tasks into R3 directly? Actually what i mean is , can i bypass java programing while dealing with BPM of CE, if possible.
thanksHi Stephen,
In the first released version of SAP NetWeaver BPM it is not possible to catch events of R/3 directly. Anyway. In case you have the possibility to trigger a web service in that situation you could start off a specific (BPM) process instance that handles the situation.
The same is basically true for the question regarding RFC: In the initial version you'd need to wrap the RFC into a web service in order to consume it.
The mapping possibilities in SAP NetWeaver BPM are meant to perform data flow between different activities in a BPMN based process model. This way you could transform a message that came into the process in that way that if fits your needs in regards to the BPM process (data) context.
Bypassing Java when using SAP NetWeaver BPM would be difficult as the supported UI technology is Web Dynpro for Java. In addition the possibility to add more flexibility to your mappings by defining custom functions is based on EJB, thus again Java.
Best regards,
Martin -
Questions regarding *dump_dest parameters and fast_recovery_area
Hello,
I just installed a fresh new 11.2.0.2 Database on Solaris 10.
Everything straightforward on the parameter side!!! I tried custom install as well as general purpose template. When installing with DBCA, I set every parameters around DB Name in lowercase name.
With this, questions are popping in my mind regarding some parameters after installation.
First, %dump_dest parameters contains in path, two times the db name (ocpdb in my case):
background_dump_dest /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
user_dump_dest /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdumpIs it normal to have ..../rdbms/dbname/dbname/..... as path, with dbname/dbname ??? Why?
Second, the question regarding the directory structure under fast_recovery_area (new term for flash_recovery_area). The directory structure:
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l
total 2
drwxr-x--- 2 oracle oinstall 512 2010-10-28 19:53 ocpdb
drwxr----- 5 oracle oinstall 512 2010-10-29 07:44 OCPDB
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l ocpdb
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-10-31 21:09 control02.ctl
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l OCPDB/
total 3
drwxr----- 5 oracle oinstall 512 2010-10-31 03:48 archivelog
drwxr----- 3 oracle oinstall 512 2010-10-29 07:44 autobackup
drwxr----- 3 oracle oinstall 512 2010-10-29 07:43 backupsetWhy am I having a subdir with dbname in uppercase AND in lowercase? Should I specify dbname in uppercase at db creation to have all files under the same directory, or in lowercase? Or, is it normal?
I want to know how to do it well before reinstalling a fresh database.
Thanks
Bruno
Edited by: blavoie on Oct 31, 2010 6:18 PM
Edited by: blavoie on Oct 31, 2010 6:20 PMHi,
I just reinstalled all from scratch, everything in lowercase as well in environment variables and dbname in dbca:
oracle@enalab13:~$ echo $ORACLE_SID
ocpdbFast recovery area directories, dates prove that it's my fresh install:
oracle@enalab13:/u01/app/oracle$ ll fast_recovery_area/
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
oracle@enalab13:/u01/app/oracle$ ll -R fast_recovery_area/
fast_recovery_area/:
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
fast_recovery_area/ocpdb:
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-11-02 11:34 control02.ctl
fast_recovery_area/OCPDB:
total 2
drwxr-x--- 3 oracle oinstall 512 2010-11-02 11:24 archivelog
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 onlinelog
fast_recovery_area/OCPDB/archivelog:
total 1
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:24 2010_11_02
fast_recovery_area/OCPDB/archivelog/2010_11_02:
total 47032
-rw-r----- 1 oracle oinstall 48123392 2010-11-02 11:24 o1_mf_1_5_6f0c9pnh_.arc
fast_recovery_area/OCPDB/onlinelog:
total 0Some interresting output asked earlier in post:
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 4
Next log sequence to archive 6
Current log sequence 6
SQL> show parameter recovery
NAME TYPE VALUE
db_recovery_file_dest string /u01/app/oracle/fast_recovery_area
db_recovery_file_dest_size big integer 4032M
recovery_parallelism integer 0
SQL> show parameter control_files
NAME TYPE VALUE
control_files string /u01/app/oracle/oradata/ocpdb/control01.ctl,
/u01/app/oracle/fast_recovery_area/ocpdb/control02.ctl
SQL> show parameter instance_name
NAME TYPE VALUE
instance_name string ocpdb
SQL> show parameter db_name
NAME TYPE VALUE
db_name string ocpdb
SQL> show parameter log_archive_dest_1
NAME TYPE VALUE
log_archive_dest_1 string
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
SQL> show parameter %dump_dest
NAME TYPE VALUE
background_dump_dest string /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest string /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdump
user_dump_dest string /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/traceI think, next time, I'll install everything regarding oracle SID in upper case...
Maybe it's details that I don't need to care about... I seems that something is happening bad with the management of fast_recovery_area...
Thanks
Bruno -
Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx 65 KB -
My questions regards Camera Raw
I am posting this to both the PhotoShop and Lightroom forums. I use PhotoShop CS4 and Lightroom 1.1 on a Windows XP OS.
My question regards Camera Raw.
Question 1: If I open a RAW file in PhotoShop will the properties remain if I later open it in Lightroom, and vise-versa. Previously I had used Canon’s DPP and once I opened files in PhotoShop it was at square one. I concluded this was due to different manufacturers. I can adjust to that. Now that I am staying with just Adobe products I want to make sure I don’t have to do everything twice.
Question 2: Using Bridge I have opened some jpg’s in Camera Raw and manipulated them. It seemed to work better if I clicked “Done” rather than Save Image (if I need to save it in another directory).
Question 3: If I am working in PhotoShop and would either like to open a Raw file or manipulate a jpg in Camera Raw, is it possible to open Camera Raw without having to use Bridge?
Thanks in advance for any assistance.rollsnut wrote:
I am posting this to both the PhotoShop and Lightroom forums.
You would have been better off asking on the Camera Raw Forum, not Photoshop (since you posted it only to the Windows side).
As for your questions, you can indeed coordinate settings to and from Camera Raw and Lightroom but it's a matter of understanding how metadata editing works...In Camera Raw/Bridge, settings are saved in the file or in a side car file...in Lightroom settings are saved in the Lightroom catalog database, not the file or side car UNLESS you specifically instruct Lightroom to read or write the settings to or from the file.
So, what Camera Raw does to a file will need to be read FROM the file inside of Lightroom. Just make no mistake that once the image in actually processed and opened inside of Photoshop, it's no longer a raw file but a processed file and anything you do to it afterwards in Photoshop will not be in the original raw file.
The other questions aren't really Lightroom questions and would be better of posted in the Camera Raw forum... -
Question to be asked to the client to setup the SAP QM configuration
Dear
Please let me know what are the question to be asked to the client to setup the SAP configuration as per there business.
Thanks
Dhanu.Dear Dhanu,
Please refer to the link below. It consists all questions for QM implementation.
Link: [http://www.sapfans.com/forums/viewtopic.php?f=27&t=192938&p=587864&hilit=spcquestions#p587864]
Please let me know your feedback
Regards
Gajesh -
Questions to be ask for new PSA creation
Hi All
What questions should i ask to client for creation of new personnel subarea?
I mean what kind of clarification required from client when i m am creating new personnel subarea.
RegardsHi Manjusha,
When you create a New PSA, one of the approach you could follow is to know the current structure of the organization. i.e. if its Region wise like North, South, East, West etc,
i.e.what is the current Personnel Area (PA ) Structure, based on that you can probe the client how further they want to divide Enterprise Structure, keeping in mind :
1) How they want to group the Employees for Time Management
2) How they want to group the Employees for Payroll Management
3) Benefits
3) Ensuring that further additions is possible, for Eg: if there are unions which needs separate treatment in terms of Time and Payroll.
Eg 1: If Company is ABC and if PA is 1) North 2) South 3) East 4) West etc
Then PSA can be:
Option a) In PA North the PSA's can be city wise i.e. Delhi, Chandighar etc similarly In PA South PSA's can be Chennai, Bangalore etc if the client want it City wise.
Option b) In PA North the PSA's can be Dept wise i.e. Purchasing, Sales, Finance, Human Resource Etc and the same PSA's can be in other PA's
Option c) In PA North the PSA's can be i) Management ii) Non-Management etc, Later if there are unions to be added you can create another PSA for specific Unions in each PA's
The above a just some examples, you will have to jointly take the decision along with Client.
But ensure that you cover all possibilities and also there is scope for new additions.
Regards
Bahubali -
What are the questions they will ask in order management?
hi, can anyone pls.. let me know the interview questions regarding order management?
thanks
arun teja vasanHi arun,
You need to be clear on :
1) OR type controls that influence the sales order
2) How to various blocks ( del, billing )
3) Looking at the schedule lines ( Delivery splits)
4) Overall document status
5) Partner information
6) Credit release ( Vkm3)
7) copy controls
8) Order, delivery billing tables and fields ( Imp ones)
to name few.
<a href="http://www.sap-img.com/sap-sd.htm">order management</a>
pl reward if helpful.
Thanks
Sadhu Kishore
Maybe you are looking for
-
I am in boot camp Windows 7 Enterprise, so I don't know if this is windows 7, but here's the story ========== I came in my room, after I turned the display off by turning the brightness off, and the screen was flashing. I didn't think to much of it,
-
Difficulty parsing XML document into query object
Background: Using CFMX 6.1 to take an XML file exported from MS-Access and parse it into a query object. Problem: Of the 6 columns defined in the target query, one of the columns is only populated in the XML file a very low percentage of the time. Wh
-
Out of Office replies not working for external emails - Exchange 2010, Outlook 2010
Hello. We have two Exchange 2010 mailbox servers and a third for client access. There are two mailbox databases replicated to both servers as a DAG. There is also one 2003 legacy server that is awaiting decommissioning that is basically just heating
-
So, when is the next firmware update???
-
Every Time I start iTunes,a Faultmessage appeared:"An unknown Fault has accured(-42032)".What does that message mean and how can I fix it. With kind Regards, Willy Van den Bergh