QUEUE Error

Hi Everybody,
In SXMB_MONI, the inbound message got struck in the queue and I got the Queue Status as "Stop". The error message in SMQ2 is "SYSFAIL". How to resolve this?
Regards,
Prasad U

Hi Sasi,
I will tell you my whole scenario here under.
I need to post multiple IDOCs from a single flat file.
For that I have created one BPM to post Multiple IDOCs. Here I have used Java Pgm for Mapping. This mapping program will create a structure as that of IDOC. So we need two transasitions to do this.
One is from File to BPM and another one is from BPM to SAP System.
File to BPM is working fine and its status is success flag in SXMB_MONI. But for BPM to SAPSystem, I got struck. Even no error messages except that Queue Stop Message.
Even I have checked it in SXMB_ADM. There it doesnt contain the parameter for QRFC_RESTSRT_ALLOWED. This parameter is under subParameter.
Since I dont know anything in XI Admin, I am feared to touch those things. And tell me one thing, it seems that my scenario will come under TRFC, then how come I have to activate QRFC. Just tell me the difference btwn the two.
And also, if we do that(what you have said) will it be processed automatically or it will be mannually processed.
Regards,
Prasad U

Similar Messages

Inbound queue error

Hi Gurus,
I am facing a problem with inbound RFC Queue,error message is logical system not defined in table smof_erpsh.
i hav e cheked the table but not too sure about how to activate the queue.
please help.
Regards,
Samarjit

Sounds like you switched backends on the CRM system. You can only have one ERP backend connected to a CRM system, in a normal typical landscape without special customizing.
You may also had a system that was copied from the original backend that is now trying to send bdocs to your crm system. Can you tell us a little more about your system landscape and we can then see what needs to be done?

Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"

Hi,
In SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
Thanks,
Praveen

Hello Mr,
Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
To be more helpful, can you post here complete error log?

Alert Monitoring - ID failures and Queue errors

Hi,
In our project we need to trigger alerts for cases apart from Mapping Errors, Application Errors and Adapter Erors like the cases mentioned below :
1. A Message gets stuck in the QUEUE of ECC system
2. The ID has errors like the Receiver Determination has errors.
How can we trigger the Alerts and see them in Our Alert Inbox .
Regards,
Arunava

Hi ,
For runtime errors , you can trigger an alert.
I don't think so, it is possible to trigger an alert when message is stuck in Queue, but if you get any error either system error or application error then you can trigger an alert.
For more-
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
If you have got any errors like communication errors because of Queue error, then you can think of configuring CCMS alerts.(i.e alerts for Components)
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Regards,
moorthy

HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

QRFC Outbound queue errors

Hi All,
I have some "qRFC Outbound queue errors" in the production system of R/3 and the target system is CRM.
The status is "SYSFAIL " .
Can anybody tell me how to solve them.
Regards,
Anindya

HI Anindya,
It's a very simple error. You have to check with your Security System Administrator if the user has included in your profile the authorization object S_RFCACL. Before this you have to define RFC Trusted / Trusting Systems in your Landscape.
Reward Points if helpful
Cheers
Manohar

BDC_CLOSE_GROUP, queue error at

I want to record the transaction MM01, i am on sap4.0 B, the moment i do the recording and click save , it shows a dialog box saying get transaction, then i click on yes, at that moment it throws an error
BDC_CLOSE_GROUP, queue error at . Please check the system log
Can anyone help, is this is a authorization error....???
Or how should i remove this....?
<b>Points will be rewarded</b>

Runal,
Might be you have opend multiple BDC groups and have not closed them properly.
Regards,
Sujatha

Queue error in BPM

Hi,
We are working in PI7.0. We have implemented an integration scenario where we use iDocs and BPMs.
When we start the workflow, we get the following error in queues: "Copy Sender from Payload: Sender is Missing in Pay", and the queue gets blocked.
In another similar scenario, we use the same iDoc header directed to the same destination, and the queues do not get blocked.
Which is the problem?
Thanks in advance,
Samantha.

Hi,
Copy Sender from Payload: Sender is Missing in Pay
1. Cross check the mapping again, have you assigned all the required fields for header mapping
2. If you are not doing header mapping in payload then Cross check in Integration directory that the checkbox " Apply control from payload" in receiver comm. channel for IDOC is unchecked.
Regards,
Sachin

Improt queue error

Hi All,
i am using two system landscape ecc6.0, i had configured TMS and, and also established rfc.
my problem is that when i tries to import the queue from DEV in PRD server its throwing an error
An error occurred when opening the source file for reading.
File name: R900434.DEV
Directory: $TR_DATA
Error code: 16
Definition of the error codes:
03   RFC system failure
04   RFC communication failure
11   invalid EPS subdirectory
12   sapgparam failed
13   build directory failed
14   no authorization
15   build path failed
16   open failed
17   read directory failed
18   read attributes failed
System Response
Transmission was terminated.
Procedure
Eliminate the cause of the error and restart the transmission.
Thanks in Advance
vijay

Graham,
when i run STMS > Import Overview > Import Queue > Check > Transport Tool?
I am getting my two systems and they are not showing any errors..
the following are displaying...........
Check Transport Tool
        DEV Development Server
            tp Interface
            Transport Profile
            RFC Destination
            tp Call
        PRD Production Server
            tp Interface
            Transport Profile
            RFC Destination
            tp Call
Thanks
vijay

JSM QUEUE ERROR - WEBLOGIC SERVER

I have created a JMS queue and deployed it in weblogic server. But I am getting the following error while running the proxy service:
" <Jun 18, 2009 5:22:32 PM IST> <Error> <OSB Kernel> <BEA-382004> <Failed to proce
ss request message for service ProxyService Database-File/DatabasePoll: com.bea.
wli.sb.context.BindingLayerException: [JMSPool:169803]JNDI lookup of the JMS con
nection factory EramIn failed: javax.naming.NameNotFoundException: Unable to res
olve 'EramIn'. Resolved ''; remaining name 'EramIn'
com.bea.wli.sb.context.BindingLayerException: [JMSPool:169803]JNDI lookup of the
JMS connection factory EramIn failed: javax.naming.NameNotFoundException: Unabl
e to resolve 'EramIn'. Resolved ''; remaining name 'EramIn'
at com.bea.wli.sb.context.ContextUtils.createBindingLayerException(Conte
xtUtils.java:924)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContex
tImpl.java:595)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextI
mpl.java:498)
at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeSt
ep.java:128)
at com.bea.wli.sb.pipeline.debug.DebuggerRuntimeStep.processMessage(Debu
ggerRuntimeStep.java:74)
Truncated. see log file for complete stacktrace
com.bea.wli.sb.transports.TransportException: [JMSPool:169803]JNDI lookup of the
JMS connection factory EramIn failed: javax.naming.NameNotFoundException: Unabl
e to resolve 'EramIn'. Resolved ''; remaining name 'EramIn'
at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.send(JmsOutbo
undMessageContext.java:537)
at com.bea.wli.sb.transports.jms.JmsTransportProvider.sendMessageAsync(J
msTransportProvider.java:680)
at sun.reflect.GeneratedMethodAccessor334.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. see log file for complete stacktrace
javax.jms.JMSException: [JMSPool:169803]JNDI lookup of the JMS connection factor
y EramIn failed: javax.naming.NameNotFoundException: Unable to resolve 'EramIn'.
Resolved ''; remaining name 'EramIn'
at weblogic.deployment.jms.JMSExceptions.getJMSException(JMSExceptions.j
ava:29)
at weblogic.deployment.jms.JMSConnectionHelper.lookupConnectionFactory(J
MSConnectionHelper.java:485)
at weblogic.deployment.jms.JMSConnectionHelper.openConnection(JMSConnect
ionHelper.java:268)
at weblogic.deployment.jms.JMSConnectionHelper.<init>(JMSConnectionHelpe
r.java:144)
at weblogic.deployment.jms.JMSSessionPool.getConnectionHelper(JMSSession
Pool.java:500)
Truncated. see log file for complete stacktrace
Please help

I have created a JMS queue and deployed it in weblogic server. But I am getting the following error while running the proxy service:
" <Jun 18, 2009 5:22:32 PM IST> <Error> <OSB Kernel> <BEA-382004> <Failed to proce
ss request message for service ProxyService Database-File/DatabasePoll: com.bea.
wli.sb.context.BindingLayerException: [JMSPool:169803]JNDI lookup of the JMS con
nection factory EramIn failed: javax.naming.NameNotFoundException: Unable to res
olve 'EramIn'. Resolved ''; remaining name 'EramIn'Are in Product ion domain or Development domain?It might be due to fact that JMS Q is not targeted for any JMS server. Can you please paste the XML files on from the $DOMAIN_HOME/config/jms/.
Cheers
Manoj

SMQ2 (Inbound Queue) : Error occurred during character conversion

Hi,
In SMQ2 an Inbound Queue has failed with status text "Error occurred during character conversion". The XML message inside this queue is in waiting status with status text " Scheduled for Outbound Processing" .
Even after cancelling this message from SXMB_MONI, and reposting the PO, still again the queue and the XML message inside the queue are in same status.
As this is in XI production system, requesting to provide some suggestion ASAP.
Thanks,
Mateen.

The queue status is still sysfail. There is only 1 message waiting in the queue.
I think that the queue might be locked for some reason and after unlocking the queue and restarting the message, the message will get processed successfully.
But before working on this I want to make sure that the queue is locked.
Do you or anyone else know how and from where can I check whether the queue is locked or unlocked?
Regards,
Mateen.

TRFC Queue Error "Unable to interpret BGUA as a number"

Hi all,
I am getting the below error message in TRFC queue
"Unable to interpret BGUA as a number" when i do a datamart dataload from ODS to Cube. ODS is getting data from datasource 0CO_OM_CCA_9. Can anyone help how to resolve this issue?.
Thanks & Regards,
Muruganand. K

What is BGUA ??
I think you have mapped this field (BGUA holding infoobject) to number or key figure field.
Check your mapping in transformation form ODS to CUBE.
Hope this helps.

CIF Queue Error

Dear All
After transfering the data from R/3 to APO system it going in error mode as show in transaction code /N/SAPAPO/CQ. But after selecting and activating the , it is clear and updating the APO Tables. Can it be automatic, please suggest the solution ?
Regards
Vimal

Hi Vimal,
Check on the following lines.
1) Check Distribution definition & object specific settings are made under
APO customisation
2) Check the performance of livecache using basis team
3) Carry out /sapapo/ccr for the transactional data which is often
getting struck
4) Check whether any sysfails/errors/queues struck in the system,
study the application logs and take corrective action and then
retransfer and check
5) If the above points did not resolve your query, mention the
error you are facing
Regards
R. Senthil Mareeswaran.

RMI Queue Error

Hey esteemed colleagues.
We are receiving the following message from WLS 6.1 sp2 right before it stops responding.
####<Jul 1, 2002 3:21:13 PM EDT> <Error> <Kernel> <HMCAPPSVR1> <NextGen1> <ExecuteThread:
'9' for queue: 'default'> <> <> <000000> <ExecuteRequest failed>
####<Jul 1, 2002 3:23:49 PM EDT> <Error> <Kernel> <HMCAPPSVR1> <NextGen1> <ExecuteThread:
'0' for queue: '__weblogic_admin_rmi_queue'> <system> <> <000000> <ExecuteRequest
failed>
####<Jul 1, 2002 3:23:49 PM EDT> <Error> <Kernel> <HMCAPPSVR1> <NextGen1> <ExecuteThread:
'1' for queue: '__weblogic_admin_rmi_queue'> <system> <> <000000> <ExecuteRequest
failed>
Any ideas?
cheers
Mike Horn

Dmitry,
Thanks for the reply. We are using OC4J 9.0.4.2 to deploy my very first toplink applicaiton.
I have no experience running a application with OC4J connection pool (nither with toplink connection pool).
Do you have any tips for me? Any gothas?
Thanks in advance for your help.
My session.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<!DOCTYPE toplink-configuration PUBLIC "-//Oracle Corp.//DTD TopLink Sessions 9.0.4//EN" "sessions_9_0_4.dtd">
<toplink-configuration>
<session>
<name>drm</name>
<project-xml>fixpos_toplink_deployment.xml</project-xml>
<session-type>
<server-session/>
</session-type>
<login>
<datasource>jdbc/drm</datasource>
<encrypted-password></encrypted-password>
<uses-external-connection-pool>true</uses-external-connection-pool>
</login>
<enable-logging>true</enable-logging>
<logging-options/>
</session>
</toplink-configuration>
I removed the login element in the project.xml
And i have configured a Contianer level data source like this:
<data-source
location="jdbc/drm"
class="com.evermind.sql.DriverManagerDataSource"
password="xxx"
xa-location="jdbc/drm"
ejb-location="jdbc/drm"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="drmdev" url="jdbc:oracle:thin:@<host>:1521:<sid>"
inactivity-timeout="300"
name="drm"
wait-timeout="20"
min-connections="5"
max-connections="10"
max-connect-attempts="10"
connection-retry-interval="2">
<description>Disti management system
</description>
</data-source>

Object queue error

While connecting to the object queue within the Sun Java System RFID Massage Queue the following error is output:
Unable to connect to the object store 'EpcisObjectStore'/
com.sun.messaging.jmq.admi.objstore.GeneralNamingException: A general naming eception is caught
Can you pls help me

I am getting similar or identical error sequence, but the failure is of a periodic task within the server, not a problem associated with anyone doing anything in Project Pro.
Standard Information:PSI Entry Point: Project User: CONTOSO\Administrator Correlation Id: 79734976-565d-4c1e-ab38-8cae7bd11d04 PWA Site URL:
http://project.contoso.com/PWASHC SSP Name: Project Server Service Application PSError: NoError (0) Queue SQL connection is being retried. Error: System.Data.SqlClient.SqlException: Invalid object
name 'MSP_QUEUE_RENDEZVOUS'. Invalid object name 'dbo.MSP_QUEUE_RENDEZVOUS'. Invalid object name 'dbo.MSP_QUEUE_RENDEZVOUS'.
I think it retries five times then hollers and retries another five times and hollers and gives up and then it all starts over again.
Standard Information:PSI Entry Point: Project User: CONTOSO\Administrator Correlation Id: 79734976-565d-4c1e-ab38-8cae7bd11d04 PWA Site URL:
http://project.contoso.com/PWASHC SSP Name: Project Server Service Application PSError: NoError (0) An unxpected exception occurred in the Project Server Queue. Queue type (Project Queue/Timesheet
Queue): ProjectQ. Exception details: PeriodicTasks failed.
The queue services is Microsoft Project Server Queue Service 2010.
The add/remove programs page says that the product version is 14.0.4763.1000.
Tomorrow I will start researching version numbers and SPs and all for various components. If anyone can make that research unnecessary by telling the problem solution, please do!
P.S. I see that my search brought me into Office 2007 land even though I'm encountering the error in Project Server 2010. If we need to delete or move my post, let's do that.

QUEUE Error

Similar Messages

Maybe you are looking for